Avoid over payment for correct and complete mold remediation of houses and workplaces by utilizing the EnviroFry “Proper Price” mold removal program, as announced by Phillip Fry, Professional Industrial Hygienist and Certified Environmental Hygienist.

1. Don’t Pay Too Much for Toxic Mold
Removal, Recommends Industrial Hygienist
Phillip Fry
Avoid over payment for correct and complete mold remediation of houses and
workplaces by utilizing the EnviroFry “Proper Price” mold removal program, as
announced by Phillip Fry, Professional Industrial Hygienist and Certified Environmental
Hygienist.
Montrose, MI, April 27, 2014 -- “Many mold remediation projects cost either too much
or too little. Many mold removal companies often charge far too much for the actual
mold remediation service that they really provide,” warns mold expert Phillip Fry,
Professional Industrial Hygienist, Certified Environmental Hygienist, webmaster since
1999 of the mold information website www.moldinspector.com, and author of five mold
advice ebooks.
“On the other hand, bargain-priced
mold removal is really no bargain at all
because such services do not: (1) fully
investigate to find and remove all of the
toxic mold infestation hidden inside
walls, ceilings, floors, basements, crawl
spaces, attics, and heating/cooling equipment and ducts of the home or commercial
building; (2) use properly trained, certified, and supervised workers; and (3) carry out
professionally and properly the ten steps required for safe and effective mold
remediation, as explained at www.moldinspector.com/mold_removal.htm.
Once a mold removal project is underway, mold remediation workers often find that the
true extent and severity of the actual toxic mold infestation is much greater than
originally thought by both the company and the client.
For example, the mold company calculates its bid price on what it discovers in its original
mold inspection and testing, but when the company personnel start removing visibly-
damaged drywall, they often learn that the hidden drywall mold problems go way into
adjoining wall, ceiling, and floor areas and rooms.
Then, unless the company has substantially over-charged the client, the company usually
secretly limits its mold work to just the surface area used in its bid calculation or asks the
client for more money.

2. To avoid charging either too much or too little for its mold removal assignments,
EnviroFry Environmental Hygienists announce the premiere of its innovative “Proper
Price” program, in which the company provides only and exactly what the client really
and truly needs for proper and complete mold remediation and decontamination of the
home or commercial building, its heating/cooling equipment and ducts, and furniture and
other possessions---
(1) Two hard-working, highly-experienced Certified Hygienist Technicians at a
combined, total daily fixed fee rate of one thousand five hundred dollars ($1,500), with
both technicians working a ten hour day, and for a three day minimum project
engagement;
(2) All required mold remediation equipment including, but not limited to, air scrubbers
with both HEPA and activated carbon filters to remove airborne mold spores and
poisonous mold mycotoxins, high output ozone generators to kill mold and mold odors,
HEPA vacuum cleaners, fogging machine to apply EPA-registered fungicides onto mold-
cleaned surfaces and areas, the advanced Rotobrush® air duct cleaning machine, and
other specialized mold remediation equipment and tools, as needed to do the job
completely and properly;
(3) Mold cleaning, disinfecting, and killing products, such as the EPA-registered
fungicide Tim-Bor (www.timborprofessional.com);
(4) One FREE day of professional and thorough mold inspection, testing, and
investigation immediately prior to doing the paid three mold remediation days to: (a) find
mold growth hidden inside walls, ceilings, floors, crawl space, basement, attic, and
heating/cooling equipment and ducts; and (b) to establish the base line level of pre-
existing indoor mold infestation;
(5) The technicians stay on job (at $1,500 per day rate) until the home or workplace mold
levels are acceptable health-wise. Specifically, indoor clearance tests must document that
no individual, indoor mold air test combined spore count exceeds a total of 1,000 mold
lab-projected spores per cubic meter of indoor air; (b) no individual mold specie type
exceeds 400 mold lab-projected spores per cubic meter of indoor air; and (c) no presence
of the dangerous Stachybotrys mold species;
This clearance mold testing standard is widely used by industrial hygienists and
environmental hygienists, and it is based on the recommendation of the inventor and
developer of the widely-used Air-O-Cell air testing cassette; and
(6) EnviroFry pays for all technician travel time, overnight accommodations, and food for
mold remediation projects in the following states: Arizona, southern California,
Connecticut, Illinois, Indiana, Iowa, Kentucky, Michigan, southern Nevada, New Jersey,

3. New York, Ohio, Pennsylvania, Tennessee, and Wisconsin. Other states are also
available with the client payment of such expenses.
To schedule the “Proper Price” mold remediation of a house or commercial or
governmental building, please email EnviroFry co-manager Phillip Fry
phil@moldinspector.com, or phone Phillip toll-free 1-866-300-1616 or his cell phone 1-
480-310-7970, or visit the company website www.moldexpertconsultants.com.
Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Phillip Toll-Free 1-866-300-1616
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com