1. A
practical training
seminar on
kota super thermal power station
Submitted to
MAHARISHI ARVIND INTERNATIONAL INSTITUTE OF
TECHNOLOGY
KOTA, RAJASTHAN
In partial fulfillment of the requirement for the award of the
degree of Bachelor Of Technology
In
ELECTRONICS & COMMUNICATION
ENGINEERING
Presented by:
LOKENDRA PANKAJ
09EMHEC032
2. THERMAL
POWER
PLANT
(66%)
HYDRO NUCLEAR
POWER POWER
PLANT PLANT
(29%) (3%)
3. Introduction
Steam Turbine
SCADA
(Supervisory Control And Data
Acquisition)
Conclusion
4. Kota Super Thermal Power Plant Is A Coal Based
Steam Power Plant
It Is Located On The Left Bank Of River Chambal.
Total Generation Capacity Is 1240mwh.
Central Electrical Authority Was Prepared The Project
Of This Plant In April,1973
10. BOILER &
SUPERHEATER
STEAM
STEAM AT
AT 354 o C
545 o C
H P TURBINE REHEATER
I P TURBINE
STEAM
STEAM AT 545 o C
AT 535 o C
L P TURBINE
11. It Is A National Communications System.
Scada System Is Used To Monitor And Control A Plant Or
Equipment In Industries Such As Telecommunications, Water
And Waste Control, Energy, Oil And Gas Refining And
Transportation.
12. 1. Sensors
2. RTUs(Remote Terminal Units)
OR
2. PLCs(Programmable Logic Controller )
3. Communication
4. Front End Processor
4. Alarms
13.
14.
15. Advantages
- Flexible, Simple, Reliable.
- Efficient with less manpower.
- Self checking and readability.
- Portable and Cost efficient.
Disadvantages
- Lacks of trained persons.
- Initial capital investment.
16. At the end of my training report I would
like to conclude that practical training is
very essential as well as theoretical training.
Turbine & SCADA systems plays an
important role in the power system operation.
