Labec Salt Spray Tester is a standardised test method used to check corrosion resistance of coated samples. Coatings provide corrosion resistance to metallic parts made of steel, zamak or brass.

1. Salt Spray Testing Chamber
Are you looking for Salt Spray Chamber online? Labec Salt Spray Tester is a
standardised test method used to check corrosion resistance of coated samples.
Coatings provide corrosion resistance to metallic parts made of steel, zamak or
brass. Since coatings can provide a high corrosion resistance through the
intended life of the part in use, it is necessary to check corrosion resistance by
other means. Salt spray test is an accelerated corrosion test producing
a corrosive attack to the coated samples in order to predict its suitability in use
as a protective finish.
Features:
Chamber Volume: 108L ~ 800L
Saline Box Capacity: 15L ~ 40L
Testing Temperature: NSS ACSS 35°C±1°C / NSS ACSS 50°C±1°C
Air Temperature: NSS ACSS 47°C±1°C / NSS ACSS 63°C±1°C
Accuracy of Temperature: ±1°C

2. You will always stand a chance to grab optimal service from these contraptions.
Salt Spray Chamber calls for immediate attention on quality grounds. Experts as
well as staunch professionals choose to impinge on these chambers because
these are well tested.
For More Information click:
http://www.labec.com.au/products/environmental-humidity-chambers/salt-
spray-tester/salt-spray-testing-chamber/
Laboratory Equipment Pvt Ltd
26 - 30 Farr Street
Marrickville, NSW 2204
AUSTRALIA
Email: sales@labec.com.au
Call us today on: (02) 9560 2811
Fax: (02) 9560 6131