2. Using template from www.cddvdenvelope.info
create your custom CD/DVD envelope or
sleeve
You can easily do it
on your own, but the
template makes it
much easier.
3. Fold the piece of paper in two horizontally
along line #1
4. Fold each corner along lines #2.
It is important to fold the paper both toward
the back and toward the front several times.
5. Fold each side along lines #3.
It is very important to fold the sides toward
the back of the envelope only.
It is hard to perfectly fold along the lines
especially if you are in a hurry or doing many.
A helpful hint is if you are going to error go
over on the bottom. Going over on the
bottom just slightly and only folding the sides
to the back makes the back side slightly
smaller.
6.
7. The trickiest step... Fold the corners to the
inside of the envelope along lines #2.
8. Fold the sides to the inside of the envelope
along lines # 3.
10. Fold the excess length of the back over the
top to the front.
11. Unfold the excess back, then tuck it into the
envelope. The back goes just behind the
front but in front of the sides and corners
that are folded in.
12. If you want to secure the disc into the
envelope to mail it or store the CD or DVD,
untuck the excess back, put in the CD then
tuck the back over top of the disc.
If mailing the envelope I
would put a little extra
tape on it