" How to " questions answer at your fingertips If you’re looking for an answer to a “How to” question, you’ve come to the right place. And if we don’t have an answer, we’ll find it for you.

1. wrap the box with a ribbon
Decorative tie ribbon on gift make even the brown paper wrapping look festive. Plastic bags with pre-
made ribbons might seem like an effective way to enhance your packaging, but simple ribbon-tying
techniques offer a gift like no other—an artisan-like look that makes a statement. Twist, tie or overlap any
type of tie a ribbon around a box , from fluffy or flat to tulle or paper, for undeniable life and floor style. All
you need is tape, scissors, and for some techniques, a stapler or tape.
bias binding
Decorating the container with how tie a ribbon around a box the diagonal is simple enough, yet it looks
roomy enough to make your gift stand out. Place the tape diagonally across the rear left side of the box.
Grab the tape at this corner and lift the box, pulling the end of the tape under the box and to the
corresponding corner on the upper right side. The ends of the how tie a ribbon around a box are now
visible in the upper right corner of the box. Tie the ends into a bow in the upper right corner. Keep sliding
the arc until you reach your desired function.

2. flat bow technique
A shallow bow creates a clean, basic look. Cut any size tape of any width from thin to wide. Pause to make
a small circle with tape. Sandwich the strap firmly in the middle so the ring lays flat. Fold the tie ribbon on
gift back and forth to the final size, creating flat layers that gradually get larger. Make at least three more
layers and hold each layer firmly in place until they are all formed. Pin the layers together in the middle. Tie
the ribbon bundle in the center with a small piece of ribbon. Attach the center of tie a ribbon around a box to
a card or package.
say with roses
Add a how tie a ribbon around a box rose to your package for an extra special touch. Place one size strip
vertically on a table. Fold the back end of the ribbon in a direction perpendicular to the middle of the top of
the ribbon so that it grows into an "L" shape. Fold the top half of the ribbon down over the corners of the "L".
Grab the corner with your left hand. With your right hand, fold the other half of the strap on the right side to
the left. With the corner protection still in place, flip the tape on the back cover, then flip the tape on the left
side to the right. Repeat turning the ribbon from top to bottom and right to left until the entire tie ribbon on
gift is folded. Hold both ends of the strap and let the loose stretch turn into a twist. Hold each end of the
ribbon at the bottom of the twist. Choose one over the other. A flower is formed. Tie off the base of the
flower with twine or string. Add green bows or fabric leaves.
multiple loops
Same advanced complexity. Ribbons with multiple loops may seem tricky too, but it's all about the ruffles.
The actual bow is a long how tie a ribbon around a box folded like an accordion. A smaller ribbon is
attached by slits on either side of the folded ribbon, holding the loops together. Shh, it's a secret.