2. Leading Laser Machine Suppliers in Europe
One destination to buy top-notch and quality rich Laser Cutting
Machines in UK, Europe.

3. About BRM Lasers
The beginning
BRM Lasers has been active in the CO2 laser machine sector since 2010 under th
leadership of Erik van Turnh out, who previously founded Tuwi metalworking machine
(www.tuwi.nl). With over 30 years of experience in the construction of metalworkin
machines, we started searching for laser machines that would also be able to cut an
engrave other materials such as acrylates and wood. Eventually Chinese imports caugh
our eye and we established contact with a whole new culture and world; the beginnin
of an adventure...
Our long standing experience in mechanical engineering, led us to adjust several aspect
of our laser machines to meet Dutch standards. From both a quality and safet
perspective, our top priority was the development of a machine that BRM could sell wit
pride and peace of mind. This cost us several months of work, but they were well wort
it; for quite a while now we have been able to claim that the BRM Laser machine
represent excellent value for money and that they have won over numerous customer
from all over Europe.

4. About BRM Lasers
The development
We started off small, unraveling the technique and giving demonstrations in a littl
rented property, but have in the past 4 years undergone considerable growth. BRM now
employs a diligent team of technicians to provide support for the hundreds of BRM
machines active in the field. Besides from the growth of the organisation itself, we hav
built up an enthusiastic team of resellers and partners in Europe. Over the next few
years, it is our goal to further expand this network so that we can serve the whole o
Europe with our laser machines.
We will continue to consider our excellent-value-for-money principle an
offered service as the main pillars for BRM’s further success. These are our company’
building blocks and will remain guaranteed along with our efforts to continuousl
innovate. We enjoy thinking along with you, and would be pleased to offer you our non
binding advice in regards to how our laser machines could meet your specific needs
Furthermore, our technical service unit is available 24x7 to grant you support before
during and after the sale and delivery of your BRM laser cutting machine.

5. BRM Laser Machines & Products
• BRM CO2 Lasers
• BRM Portal lasers
• BRM Metal lasers
• BRM Fiber lasers
• BOFA - Extraction system
• Cermark/Thermark - Paste and spray
• Adventis - Acrylic mat

6. BRM CO2 Lasers
The BRM CO2 Laser cutting and engraving machines with a closed-table construction.
These versatile machines cut and engrave many types of materials with great precision
at a high speed, ranging from acrylics to wood and cardboard. They are relatively
compact and are available with different capacities and table sizes, which determine
the cutting thickness and work surface dimensions.

7. Our CO2 Portal lasers differ from the closed CO2 lasers in that they have an open-table
construction and are therefore highly suitable for larger sheets. They can be supplied
in two different formats.
BRM Portal lasers

8. BRM Metal lasers
Our metal lasers offer the same possibilities as our CO2- and portal lasers in terms of
cutting and engraving a wide variety of materials with a CO2 laser tube. However,
thanks to the addition of oxygen and a special laser head, these models have the
additional benefit of being able to cut steel up to a thickness of 1.2 mm

9. BRM Fiber lasers
The BRM Fiber laser differs from the other 3 laser machine categories in that it does
not use CO2 technology. It is highly suitable for the rapid engraving of images and/or
texts onto metal and synthetic materials without the need for any kind of pre-
treatment.

10. BOFA - Extraction system
BOFA extraction systems are designed for applications that emit gasses and volatile
organic compounds. These filter systems use carbon filters to purify the air, meaning
that your laser machine can be used in an enclosed space.

11. Cermark/Thermark - Paste and spray
BRM Lasers sells various Cermark/Thermark products, such as pastes and sprays used
for the lasering of metals and other materials. These products are used as a pre-
treatment for obtaining clear and distinct engravings.

12. In order to offset the laser beam’s reflection on the work table, we gladly use these
acrylic anti-reflection mats produced by our German partner Adventis. The standard
size of a mat is 400x600, which makes it highly compatible with our machines.
Adventis - Acrylic mat

13. Need Advice in Laser cutting and engraving??
In addition to the provided technical support, we are also happy to advise you about
the possibilities of our laser machines for your specific applications. According to your
needs, we will assess which machine is the best fit for your company. Thanks to our
extensive experience with different products and industries, we will always be able to
provide you with an appropriate solution, even if the solution lies beyond our own
company.

14. BRM Offers a Complete Laser cutting and
engraving cources
Do you want to get more out of your BRM Laser machine? If so, follow the laser cutting
and laser engraving course provided by our partner Laseruniek. This course will
introduce you to the technology behind our laser machines. The in-depth course has
been designed to allow you to calmly focus on all the possibilities offered by your BRM
laser machine, ranging from operational aspects to maintenance, to specific
applications on your material, and to working with the software.

15. Contact BRM Lasers to buy quality Laser Cutting
machines and Laser engraving machines
http://www.brmlasers.eu/
Call + 31 (0)544-350320
https://twitter.com/brmlasers info@brmlasers.com
Address: Ambachtsstraat 43, Winterswijk 7102 DW
The Netherlands