Professional Automotive Auto Repair Service Anchorage reviews by real people.For more information about Professional Automotive located in Anchorage. http://www.professionalautomotiveak.com/
Ride the Storm: Navigating Through Unstable Periods / Katerina Rudko (Belka G...
How to fix air conditioner of your car
1. How to Fix Air Conditioner of Your Car?
Are you sweltering in the heat in your car because of a faulty air conditioner? Here are
a few quick tips on how to fix Anchorage auto air conditioning:
Auto AC is a Sort of Refrigerator: This is something you need to understand. Your car
AC is designed to move the heat indoors to the outside. You can fix it yourself, or hire a
pro.
Components of Auto Air Conditioning
: The major inclusions of your car’s AC are:
• Compressor: it compresses and mixes the refrigerant
• Refrigerant: it carries the heat
• Condenser: turns the refrigerant to liquid from gas, expelling the heat from the car
For more information please visit: http://www.professionalautomotiveak.com/
2. Process of Air Conditioning
The compressor pressurizes the refrigerant
and sends it to the condensing coils located
before the radiator. Compressing makes
the gas hot. The added heat in the
condenser and the heat picked up from the
refrigerant in the evaporator is expelled to
the air that flows from outside. When the
refrigerant cools to saturation, the phase is
changed from gas to liquid. The liquid
passes into the evaporator where it loses
pressure added to the compressor. This
makes the liquid change to low pressure
gas which cools the remaining liquid.
Auto Repair Anchorage AKAlaska Auto Repair Service
3. Check whether R-134a Leaks Out
: It is easy to spot a leak, but not easy to fix without tearing things apart. Auto-supply
stores have a fluorescent dye which checks leaks. If the seepage is bad, there will be no
pressure. Locate the low-side valve and check PSI levels with a gauge. Don’t poke the
valve as it is illegal. It is known as venting. Is the Compressor Turning? This is an
important consideration in auto inspection in Anchorage, AK. Start your car, switch on the
AC and check the hood. The AC compressor looks like a pump of steel and rubber. The
pulley before the compressor acts as an external pulley with an inner hub. It turns with an
electric clutch. If the blower AC is turned on, but the center of the pulley remains
static, the clutch of the compressor is not engaging. It could be due to a bad fuse, wiring
issue, broken AC switch or problem with the refrigerant.
Oil Change Anchorage Alaska
4. Feel for Cooling
: If there is cooling in the system, but to a negligible extent, it can be due to low pressure. In
that case, turn up the refrigerant. Kits for refilling the system are available at auto stores.
Make sure not to overfill. If you include more amount than required, it will not enhance
performance of your Anchorage auto air conditioning. Choose good quality automated
equipment as it helps monitor the cooling output in real time by adding the refrigerant.
Once performance starts decreasing, the refrigerant is removed until the performance picks
pace again.
Clutch Repair In Anchorage
5. Wheel alignment is done by taking the measurement of suspension angles and carrying
out a variety of adjustments on suspension components. This will help to adjust the
wheel angles to ensure that they are all parallel to each other and at the same time
perpendicular to the surface. This service will help to increase the life of the tires. It is
important to know that in every 12-18 months, you can take your vehicle for tune-ups in
order to keep your vehicle running at its best. Tune-ups in Anchorage, AK will help you
avoid costly repairs in the future and also to get a good gas mileage from your car.
We can now look at different aspects of wheel alignment to help us clearly understand
this process.
a.) Camber
This is the angle of the wheel which is measured when the top of the wheel has tilted
out or in. When you find that the wheel has tilted out, it means that the angle is positive
and in case the wheel has tilted-in the camber is said to be negative. Whenever you
realize that camber is out of adjustment, you should take your vehicle for alignment to
avoid premature tire wear. If a pulling problem persists after alignment and repair, it can
be due to uneven tire and you can correct the problem by replacing the tire.
Auto Inspection in Anchorage