TitanMIMO is the only testbed capable of enabling true 5G Massive MIMO research without compromise.
- Remote or local radio head location
- Validate various waveform propagation schemes
- Optimize network deployment by balancing cost VS performance
- Validate interoperability scenarios
- HetNet, MU-MIMO, and CRAN testbed ready
- Validate, optimize & develop analytic channel models
- Optimize TDD and RF calibration techniques
- Full TDD & FDD support
2. Wireless Product Family
TitanMIMO Series
PicoSDR Series
ZeptoSDR Series
- Portable Wireless Device
- Low Power, SISO
- FMC-based Radio Head
- BTS, Small Cells, CRs, MIL SDRs
- Up to 8 RF TRXs Support
- FMC-based Radio Head
- 5G Backhaull/RAN, WiGIG, Beamformers, Massive MIMO - MIMO RADAR
- Up to 1000 RF TRXs Support
- FMC-based Radio Head
Portable MIL+4G Prototyping
Performing MIL+4/5G Prototyping
Advanced 5G, Massive MIMO, MIMO RADAR Prototyping
5. User-defined Topologies
20 Gbps
Copper/Optical
User-Defined Links
MiniSAS High Speed Physical Copper/Optical Interface
Virtex-6 GTX
Provided Aurora-4x (20 Gbps) IP Core
OR
User-Defined IP (CPRI, Others)
6. RRH 6-Series
RF:
• 8x RF TRX
• 70 MHz to 6 GHz Tuning
• 0.2 to 56 MHz BB BW
• RF Filter bank or Bypass Digital:
• 7x 20 Gbps Copper/Optical Interfaces
• Total = 140 Gbps
• 1x (out of 7 ) 20 Gbps required for the all 8 TRXs, full BW full-duplex transfer
7. FMC Radio640
AD9361LPCRef/Clk INTX1 (FDD) TX/RX1 (TDD) RX1 (FDD) PPS/Trig INLO IN 1LO IN 2ClockingClk from carrierRX and TX dataGPIOctrlctrlSWWB MatchingWB Att and GainSWFilter banks (LTE – Massive MIMO – etc) WB MatchingWB Att and GainTX2 (FDD) TX/RX2 (TDD) RX2 (FDD) SWWB MatchingWB Att and GainSWFilter banks (LTE – Massive MIMO – etc) WB MatchingWB Att and Gain
8. RRH X-Series 250 MHz BW
IQ Samplers:
• 8x 250 MSPS ADCs (14-bit)
• 8x 1000 MSPS DACs (16-bit)
• 4x User-Supplied TRX supported (IQ scheme) Digital:
• 7x 20 Gbps Copper/Optical Interfaces
• 2x (out of 7 ) 20 Gbps required for the all 4 TRXs, full BW full-duplex transfer
9. RRH X-Series 125 MHz BW
IQ Samplers:
• 16x 125 MSPS ADCs (14-bit)
• 16x 1000 MSPS DACs (16-bit)
• 8x User-Supplied TRX supported (IQ scheme) Digital:
• 7x 20 Gbps Copper/Optical Interfaces
• 2x (out of 7 ) 20 Gbps required for the all 8 TRXs, full BW full-duplex transfer
10. RRH X 125 MHz BW (60GHz RF) QEOS RFIC
16 IQ
16 IQ
QW6022
V-band User-Defined FE
24. TitanMIMO-6 TDD Antenna Option
RX/TX Calibration Path Included
• Capacitive Links
• For TX calibration, all transmits signals can be added at the same receiver input. Channel separation can be done at the digital level since they are orthogonal.
25. Thank You!
Martin Turgeon
Product Leader
T. 418 914-7484 x2311 | 1 855 914-7484 | C. 418-262-5820 | F. 418 914-9477 2150, Cyrille-Duquet, Québec (Québec) G1N 2G3 CANADA
martin.turgeon@nutaq.com www.nutaq.com
Thank You!