Application Instructions: How to Apply Your Marble MacBook Decal. Congrats on your purchase of a gorgeous Marble MacBook Decal! Chances are, you can't wait to glam up your MacBook, so we'll dive right into How to Apply Your Marble MacBook Decal. Please note: There is a slight difference in application between MacBook Pro (non-Retina) and MacBook Air / 'MacBook Pro with Retina Display' decals. This set of instructions if for MacBook Pro Retina Display and MacBook Air decals. For more information about our Marble MacBook Laptop Decal products, visit us at: http://marblemacbookdecals.com/ & on Etsy at: https://www.etsy.com/shop/MarbleDecals

1. Application
InstructionS
Marble MacBook Decal
Please read ALL STEPS before applying! **
Photo Instructions + Additional Tips can be
found at: http://bit.ly/How-To-Apply

2. 1
Application InstructionS Marble MacBook Decal
Clean and dry the top surface of your laptop.

3. Application InstructionS Marble MacBook Decal
2
Grab a credit card to use as a burnishing tool.

4. Application InstructionS Marble MacBook Decal
Place your MacBook on a flat surface in front of you—with the
opening facing you and the laptop completely closed.
3

5. Application InstructionS Marble MacBook Decal
Very slowly peel the backing away from two corners along
one of the longer edges of the decal.
4

6. Application InstructionS Marble MacBook Decal
While holding the decal taut, line up the edge of the
decal with the edge of your laptop; adhere lightly. If the
decal corners are not in alignment with your laptop corners,
carefully peel back up and reposition. When in alignment—
press down with your thumbs.
5

7. Application InstructionS Marble MacBook Decal
Push a credit card across the top of the decal to smooth out
air bubbles—pushing air outward.
6

8. Application InstructionS Marble MacBook Decal
Continue pulling the backing away in small increments
(1-2”), smoothing with a credit card as you go.
7

9. Application InstructionS Marble MacBook Decal
When you get to the end, ensure the corners are in
alignment. Starting with one corner, apply pressure with your
finger, and carefully peel the backing completely off the decal
on that side—then continue pulling until it is completely
removed. Apply pressure to the opposite corner to secure the
decal completely.
8

10. Application InstructionS Marble MacBook Decal
If one or more corners/edges is not completely secure, apply
low heat from a hair dryer held at least 5 inches away for no
more than a few seconds per corner.
9

11. Application InstructionS Marble MacBook Decal
Open your MacBook and watch it GLOW!
Use the F1 and F2 keys in the left corner of your keyboard to
adjust logo brightness.
10

12. Application InstructionS Marble MacBook Decal
EXTRA CREDIT
Share a photo of your marbleized MacBook on social tagging
@MarbleMacBook for your chance to win a monthly prize!
Questions? Comments?
Please contact us directly at: marbledecals@gmail.com. Thanks!
Visit us at:
MarbleMacBookDecals.com & Etsy.com/shop/MarbleDecals