1. JT GENERAL MAINTENANCE
LIFTING DEVICE/CRANE/HOIST/SLING/TRAINING
CERTIFICATION/INSPECTION/ENGINEERING/FABRICATION
JT General Maintenance 765 Guelph Street Kitchener ON, N2H 5Z2, Canada
Good morning
JT General Maintenance. offers a worry-free maintenance program. Our inspections are carried out by an
experienced crane and hoist technical representatives in compliance with Regulations for Industrial
Establishments Ref #851/CSA B 167-08. All of our service technicians have more than 15-20 years
service experience in the field, licenced electricians/millwrights. You can combine your inspection with
regular maintenance by competent personnel in the upkeep and repair of every type of over head lifting
device. All technicians are completely fork lift, man lift, scissor lift, working at heights trained. As well we
have chemical evac training. We are also currently on the new ISnet World web site for safety as well.
Services Provided
JT General Maintenance provides 24/7 days a week on call emergency service, repairs to all makes and
models as well as repairs/parts to all systems we inspect. Sales on all makes, models, installation of
complete new systems (turn key systems also available). We also carry a wide variety of parts in stock as
well as a vast number of parts in inventory.
Engineering
Custom application, PHSR (pre health safety review), mezzanines, ladder, structural buildings, custom
gantry systems, jibs, crane systems, custom machines as per engineering specs
Confine space equipment
Sales, annual inspection certification, engineering, safe entry procedures, fall protection ladder access,
harness/fall protection training
Lifting Device
Sales, annual inspection certification on all lifting equipment including overhead cranes, chainfalls, slings,
lifting tables etc, repairs, parts and 24hrs on call service, slings, load testing, engineering, overhead lifting
device safe operation training
Licenced Electrical Contractor, millwright, welding including stainless, aluminum
Fabricating
Mezzanine, custom ladder application, roof top fall protection systems, piping, walkway systems, pump
replacement/rebuilds, motor rewind/new motor, custom fabricating as per engineering specs, custom
lifting equipment fabrication and install
Training
Confine space, working at height, overhead crane, rigging, fork lift, harness, new system procedure
Service Technician Hourly Rate
Inspection – 50 to 60 per hour depending on condition/location of inspection
Repairs – 50 to 60 per hour depending on type of repairs
2. JT GENERAL MAINTENANCE
LIFTING DEVICE/CRANE/HOIST/SLING/TRAINING
CERTIFICATION/INSPECTION/ENGINEERING/FABRICATION
JT General Maintenance 765 Guelph Street Kitchener ON, N2H 5Z2, Canada
Engineering – will depend on scope of job
PHSR (Pre-Start Health and Safety Review) – in compliance with REG 851-528/00 will depend
on complexity of job
Licence Electrical Contractor ECRA/ESA 7010550
Anything you require we can provide
If you have any questions, please feel free to contact myself with any concerns
Thank you for your time
Sincerely,
Jerry Metz
President/Project Manager
J T General Maintenance
(P) 226-747-5171
(F) 519-865-0386