What are the problems which takes place if an IR illuminator is not installed with network camera?

1. Network camera and IR
Illuminator
Axton , Utah , US,
(801-519-0500)

2. Problem without IR
• IP camera is mainly useful for a vied range
area. One can monitor the field with the
help of IP camera. IP cameras are mainly
used where drilling and digging is not
possible. IP camera will help you remotely
access the field with the help of a web
browser. But the main problem with IP is
the bit rate problem.

3. • During the night the camera does not get
sufficient light. And hence the AGC , which
is a camera technology amplifies the
magnitude and the bit rate increases. Due
to the bit rate increase the picture
obtained will be blurred or unclear. This
video will be grainy and the camera will be
of no use.

4. How to fix this problem?
• We can fix this problem with :
– Either Disabling the AGC function
– Or to Install an IR light

5. • Disabling the AGC: This is an easy way of
disabling the AGC. This will surely reduce
the bit rate but the image quality will be
very bad. Doing this directly means no
security.

6. • Install an IR lights: The best solution is to
install an IR lights. This will reduce the bit
rate and we will get efficient and
qualitative images. This helps the security
camera get high resolutions. Here the
noisy will also reduce and the camera will
give better compression. As the Bit rate
reduces the storage also reduces.

7. Thank you
• Visit : axtontech.com to avail IR illuminator
at great rates.