The document discusses issues with a Fuji Xerox DocuPrint CM305 printer and proposed solutions. It summarizes that replacing the printer's drum resolved color inconsistency issues. It also notes that printing directly from Adobe software provides the best color match compared to other formats. The document alerts about a planned wireless router change and says connectivity will be monitored closely to ensure no disruptions.
3. ElitesWave
CM305
Full Name: Fuji Xerox DocuPrint CM305 df
Spec:
23 pages per minute printing
Paper capacity – Up to 501 sheets
Automatic 2-sided printing
Print resolution of up to 600 x 600 dpi (multi-level)
Memory capacity of 256MB and processor speed of 400MHz
Network ready, USB 2.0
Print Language or PDL (Page Description Language) : PCL6,
PCL5, Adobe PostScript 3, FX-PDF
4. ElitesWave
How it prints ? - Laser Printer
Toner: a powder used in laser printers and photocopiers
to form the printed text and images on the paper.
Drum: the device that receives the image from the laser
and transfers it to the paper to produce the final print.
Fuser: melts the toner onto the medium (paper)
7. ElitesWave
Colour Print
Besides the issue of Drum, we found there are
huge differences among prints from the same
original source
We set up six blocks with Pantone uncoated
codes in Adobe Illustrator CS 6 in iMAC(thanks
the assistance of Ray & Bright)
Yellow ( 109 UP)
Purple (7663 UP)
Green (7739 UP)
Red (7620 UP)
Blue (2736 UP)
Light Brown ( 467 UP)
8. ElitesWave
Colour Print - Recommend
After printed with different formats and software => None of
them are 100% matched the colours saw on screen or Pantone
colour book.
But we suggest every designer to save in Adobe Illustrator or
Photoshop files, and directly print out without change to other
formats. MS Window or Apple MAC would not impact a lot.
9. ElitesWave
Network Change Notice
This week we might do the change of Wireless
Router again…
Last time it caused everyone unhappy with internet
access around 2-3 days.
And also for Yannick’s pocket.
So this time we would check and response more
proactivly.
We would rollback to current setting if needed with
the frequency of per hour monitoring.
If any trouble occurs, please inform us asap. It might
help others!