Download the latest DELL EMC PowerEdge DES-4122 Exam Questions for your preparation and you can practice real DES-4122 questions and answers for your final success.
2. 1. A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1)
to install Windows 2016 They manually boot to the OS installation media without
using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on
the virtual disk can be partitioned
How should the technician obtain access to the remaining 2 TB (approximately)
of storage?
A. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this
server
B. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than
2048 GB
C. Upgrade to a newer version of the operating system
D. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try
again
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
3. 2. Where is the data stored to allow Easy Restore to successfully
complete a system board replacement?
A. NAND Flash module on the disk drive mid plane
B. IDSDM SD card
C. vFlash SD card
D. Serial Flash storage in the server's front panel
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
4. 3. A technician needs to repurpose a Dell EMC PowerEdge server. The server has
dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System
BIOS?
A. System Profile
B. Virtualization Technology
C. HyperThreading
D. Number of Cores per Processor
Answer: A
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
5. 4. What are the default settings used when applying firmware and a
configuration to a replaced part using the Lifecycle Controller?
A. Firmware: Upgrade to latest available version
Configuration Apply always
B. Firmware Allow version upgrade only
Configuration: Disabled
C. Firmware: Match firmware of replaced part
Configuration Apply always
D. Firmware Disabled
Configuration Apply only if firmware match
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
6. 5. What is the purpose of the Silicon-Based Hardware Root of Trust feature in
Dell EMC PowerEdge 14G servers?
A. Ensures that the installed operating system is authentic
B. Ensures that the server has a valid Service Tag number
C. Ensures that no unauthorized BIOS or firmware codes are run
D. Ensures that the server boots only when connected to a verified network
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
7. 6. What is a systems management console solution optimized for
monitoring and managing Dell enterprise and remote office hardware?
A. SupportAssist Enterprise
B. iSM
C. OpenManage Essentials
D. iDRAC9
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
8. 7. After completing a disk rebuild operation, a technician needs to
configure the system so that the rebuild process happens faster the
expense of slowing users down.
Which setting should be changed?
A. Rebuild Rate in the BIOS settings
B. System Profile to Performance in the BIOS settings
C. System Profile to Performance in the iDRAC GUI
D. Rebuild Rate in the iDRAC GUI
Answer: D
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
9. 8. A company that has very specific firmware requirements has acquired Dell EMC PowerEdge
servers Any replaced parts of the type must match the original parts identically. The
procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
A. Configure servers to access the remote firmware repository
B. Enable the Match Firmware of Replaced Part setting in the system BIOS
C. Install and configure a repository manager
D. Enable the Collect System Inventory On Restart (CSIOR) attribute
Answer: A
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
10. 9.A technician installs eight servers into a fully operational rack with
top of rack switch Each server has a quad 1Gb NIC and redundant
power supplies. The company uses iDRAC in shared LOM mode with
LOM1 as the selected NIC
What should the technician do to verify iDRAC connectivity on each
server?
A. iDRAC Datacenter license is installed.
B. Ethernet port LOM1 is cabled and the link light is green.
C. iDRAC dedicated NIC port is cabled and the link light is green
D. iDRAC Enterprise license is installed
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
11. 10.Dell EMC PowerEdge 14G servers support which technology?
A. Quicksync 1.0
B. Intel Boot Guard
C. AMD GuardMI
D. iDRAC8
Answer: C
Download Passcert Latest & Valid DES-4122 Free Dumps To Ensure Your Success
