Công ty TNHH thiết bị kỹ thuật Đà Nẵng chuyên cung cấp các loại van UNiD uy tín và chất lượng.
Liên hệ: 0918.434.694 để đặt hàng và tư vấn một cách tốt nhất.
3. 02
SOLENOID VALVE
Company
Profile
PRO UNI-D CO., LTD was founded in 1988,
insisting in best quality, service and credit. We have
kept investing in research and development, and
currently production capacity ranks first in 2 port 2
way solenoid valve in Taiwan. Having customer from
France, Spain and all over the world specify
purchasing miT-UNID-cns Solenoid Valves. Solenoid
Valve is very widely applicable, it can be used in
industrial application, water treatment, air
conditioning, chemical and other fluid automation.
We have patents and certificates in a lot of countries,
obtaining CE, CSA , ISO-9001 certified factory.
CE
ISO9001
Patent Certificate
IP6X
International Patent and
Certificate
www.unid.com.tw
6. Product
Introduction
Product
Features
● Voltage Application:
AC110V(50/60)Hz
AC220V(50/60)Hz
DC24V
Other voltage such as DC12V、AC380V etc
● Operation Type:
N/O-Normally Open
N/C-Normally Closed
● Coil Type:
Iron shell mold flying lead coil(standard coil)
Waterproof flying lead coil
Waterproof DIN coil
NASS waterproof DIN coil (IP65)
NASS explosion-proof coil(IP67)
● Pipe Thread Type:
BSPT(PT)(standard)
BSPP(PF)
NPT
● Flanged Type:
JIS 10K(standard)
ANSI-150LB
JIS-20K
DIN-PN16
● Valve Material:
Forged brass, Cast bronze
Iron
Stainless steel
PVC
Teflon(PTFE)
05
SOLENOID VALVE
www.unid.com.tw
Profile
Solenoid Valve is a device that uses electromagnetic force to drive the core
and to operate the valves. Before electrifying, the valve stays closed/open,
and when electrifyed, the electromagnetic force will drive the core to make
it open/ close. The solenoid valve is known for its fast operation movement,
simple valve body structure, easy-operating and it's used mainly for cutting
off, turning on or switching the flow direction automatically.
We offer 2 port 2 way, 3 port 2 way normally closed / normally open
solenoid valve, with screwed end, flanged, wide optional specification rage,
pipe diameter from 1/8 '' to 4 '', explosion-proof solenoid valve , as for
material: forged brass, cast bronze, cast iron, stainless steel, PVC and
Teflon(PTFE) valve, wide fluid media rage such as: water, air, steam, gas,
vacuum, light oil, heavy oil, acid/Alkaline-based fluid, etc.
7. Electric apparatus
Features
Please make sure the power supply is correct and the current must be
greater than the current value ,see below table for reference.
Item Power supply(V) Current(A) Item Current(A)
UAW-15~50
US-15~50
SUW-15NO~25NO
UW-10NO~25NO
UG-10NO~25NO
UV-10NO~25NO
UW-35~50
SUW-35~50
UW-10~25
UG-10~25
UV-10~25
UPS-10~25
SUW-10~25
SUS-10~50
UW-35F~100F
US-35F~100F
UD-10(H)
US-10
UA-10
SUS-10
UDC-8~15(TF)
UAO-8~15
UD-6~8(H)
UA-8
US-6~8
SUS-6~8
SUW-80F
SUS-80F
UDC-20~25(TF)
SUW-80F NO
SUS-80F NO
UW-35NO~50NO
SUW-35NO~50NO
UD-10NO
UPS-15NO~25NO
SUS-15NO~50NO
UW-35F NO~100F NO
US-35F NO~100F NO
UD-10(8mm)
UD-15
USS-15
UD-6NO~8NO
US-6NO~8NO
SUS-6NO~8NO
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
DC24V
AC110V
AC220V
1.14
0.44
0.33
1.13
0.19
0.1
0.95
0.19
0.1
0.75
0.19
0.1
0.66
0.11
0.06
1.14
0.53
0.3
1.15
0.64
0.65
1.15
0.64
0.65
1.05
0.41
0.25
1.05
0.27
0.14
1.15
0.69
0.19
0.8
0.11
0.74
0.19
0.15
06
SOLENOID VALVE
www.unid.com.tw
0.69
Power supply(V)
Profile
8. Cautions
Piping installation
instruction
•
• In order to extend the service life of the solenoid valve, Y line filter should
be installed in the front end of the solenoid valve.
• Please confirm the voltage, fluid, temperature and pressure before installation.
• DC voltage coil temperature rises due to long-time electrifying which would
lead to decreased working ability; the less is recommended to electrify for
long time.
• Before wiring or checking, be sure to turn the power off to avoid danger
• Please avoid facing up to the outlet hole when using the DIN plug coils,
and indeed tighten it to prevent dust or rain water infiltration
• Non-explosion-proof products not cannot be installed in hazardous areas
(Example: explosive gas) as well as perfect vacuum environment
• Water hammer may occur under certain pressure and the influence of the
fluid, to avoid that, installing water hammer absorber is recommended.
Before installation, the pipe line must be cleaned of impurities
This product is not available for installing inversely or vertically, the pipe
must be horizontal in order to avoid any mechanical problems.
07
SOLENOID VALVE
www.unid.com.tw
Profile
High pressure input
Manometer
Manual valve
Manual valve
Manual valve Manometer
Filter
Pressure reducing
valve Solenoid valve
check valve
Bypass
Low pressure
output
9. Rubber ,Plastic
Feature & Indication
Generic Name Names Features
NBR
o o
-5 c~80 C
Silicone
o o
-5 c~130 C
PTFE
o o
-5 c~185 C
EPDM
o o
-5 c~130 C
VITON
( FKM)
( FPM)
o o
-5 c~130 C
Nitrile rubber
Silicone rubber
Polytetrafluoroethylene
Ethylene propylene
rubber
Fluorocarbon
rubber
Teflon
*Please follow the recommended solenoid valve temperatures
08
SOLENOID VALVE
www.unid.com.tw
Profile
Oil resistance and abrasion resistance, often apply to
seal materials, particularly resistant to mineral oil for
the best.
* Not suitable for using in polar solvents, such as
ketones, ozone, nitro hydrocarbons, MEK and
chloroform.
Resistance to polar solvents (alcohols, ketones,
ethylene glycol) of hydrochloric acid. With good
ozone resistance, excellent water resistance and
chemical resistance.
* Not recommended for aromatic hydrogen.
Excellent ozone ,oxides corrosion, and neutral
solvent resistance
* Not recommended for most concentrated
solvents, oils, concentrated acid and dilution
sodium hydroxide
Premium chemical resistance and higher price are
the two characteristics, can be resistant to most oils
and solvents
* Not recommended for ketones, esters and
mixtures containing nitrate
Able to withstand all the strong acid(including aqua
regia) , strong oxidants, reducing agents and various
organic solvents except alkali metal fluoride,
sodium hydroxide medium
It is better than rubber almost in all physical
properties except elasticity and it has the
characteristics of a low coefficient friction
12. Coil Matching Table
Type
Type
Type
Type
Applicable
items
L Type
M Type
USS-15
UD-15
UD-10(8mm)
UA-10
US-10
UD-10(H) (NO)
SUS-10
UAO-8~15
UDC-8~15(TF)
UW(F)-10~50(NO)
UV-10~50
UG-10~50
SUW(F)-10~50(NO)
UPS(F)-15(NO)~25(NO)
SUS(F)-15(NO)~50(NO)
UW-35F~100F(NO)
US-35F~100F(NO)
NW-35~50
S Type
M Type waterproof
coil (flying lead)
UA-8
UD-6~8(H)
UD-6 NO~8 NO
SUS-6 NO~8NO
UA-10
US-10
UD-10(H) (NO)
SUS-10
UAO-8~15
UDC-8~15(TF)
UW(F)-10~50(NO)
UV-10~50
UG-10~50
SUW(F)-10~50(NO)
UPS(F)-15(NO)~25(NO)
SUS(F)-15(NO)~50(NO)
UW-35F~100F(NO)
US-35F~100F(NO)
NW-35~50
S Type water-proof coils
UA-8
US-6~8
SUS-6~8
UD-6~8(H)
NASS DIN 43650 waterproof coil
UA-10
US-10
UD-10(H) (NO)
SUS-10
UAO-8~15
UDC-8~15(TF)
UW(F)-10~50(NO)
UV-10~50
UG-10~50
SUW(F)-10~50(NO)
UPS(F)-15(NO)~25(NO)
SUS(F)-15(NO)~50(NO)
UW-35F~100F(NO)
US-35F~100F(NO)
NW-35~50
UAW-15~50
US-15~50
UDC(TF)-20~25
SUW-80F(NO)
SUS-80F(NO)
PKS-15~25
SKS-15~25
PKW-10~50
SKW-15~25
XL Type NASS DIN 43650 waterproof coil
NASS(EEx mll T4)
NASS Explosion-proof Coils
UD-10
SUS-10
UW(F)-10~25
UG-10~25
UV-10~25
SUW(F)-10~25
UPS(F)-10~25
SUS(F)-15~50
NW-35~50
PKS-15~25
SKS-15~25
PKW-10~50
SKW-15~25
11
SOLENOID VALVE
www.unid.com.tw
Applicable
items
Applicable
items
Applicable
items
NASS( II 2 G Ex e mb IIC T4 Gb)
NASS Explosion-proof Coils
Profile
13. Coil Size Matching Table
Category
Dimension
(mm)
XL Type
S Type
L Type
S Type waterproof coil
M Type
M Type waterproof coil
NASS DIN 43650 waterproof coil
NASS(EEx mll T4)Explosion-proof Coild
NASS DIN 43650 waterproof coil
H
D1
D2
D3
D1 D2 D3 H D1 D2 D3 H D1 D2 D3 H
D D1 L H1
D L H D D1 L HD1 D2 D3 H
D L H
D D1 L H H1D D H1
Ø60.7 Ø23 Ø63.2 53.1 Ø42.3 Ø16.6 Ø44.4 42.1 Ø42.5 Ø16.5 Ø44.4 34.4
Ø37.3 Ø14.2 Ø37.5 29.2 Ø14.1 50.5 32.4 Ø16.3 Ø56 69.3 38.2
Ø16.3 Ø56 97 52 Ø14.8 57 42.3
Ø10.0 Ø14.8 82.3 45.2 92Ø14.6 Ø71.1 61
H
D1
D2
D3
H
D1
D2
D3
H
D1
D2
D3
H
D1
D
L
H
D
L
H1
D1
D
L
H
D
L
H1
L
D
D1
H1
L
D
H
H
38.2
H
H
44.8
H
12
SOLENOID VALVE
www.unid.com.tw
Category
Category
Category NASS( II2GExembIICT4Gb)Explosion-proofCoild
Dimension
(mm)
Dimension
(mm)
Dimension
(mm)
Profile
15. SPECIFICATION
UD-6~15
NC
L L
D D
H
H
UD6~8UD10~15
L1
D1
UD-6
UD-8
UD-10
UD-15
23
23
20
20
19.3
19.3
21
21
M4x0.7
M4x0.7
M5x0.8
M5x0.8
MD1L1
MATERIAL:
Valve bodyCoil Tube Spring Core Plug O-ring
Forged
Brass
Special
copper wire
(H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR (PTFE)(Viton, Silicone,
PTFE)
• UD series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
• Able to operate under no differential pressure
• Applied fluid type : water, air, light oil, gas, vacuum
o o o
• Acceptable for customization: Viton (130 C) Silicone (130 C) and EPDM (130 C) for seal plug,
PRODUCT DESCRIPTION
•
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Before pipelining, the pipe line must be very clean without any contaminants or impurity.
CAUTIONS:
Liquid status when it is in high temperature; solid status when it is in low temperature.
• Corrosive fluid
• Viscosity over 20cst
•
Not Suitalbe For Fluid As Below:
MODEL
Coil
UD
Operating
Fluid
AC110
Voltage
- - - -
Thread
-
Pipe
Size
Operating
Pressure
6 1/8":
8 1/4":
10 3/8":
15 1/2":
6
H : High pressure
: Standard G : Gas
LO : Light oil
VA : Vacuum
: Standard (water, air)
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
PARTS
MATERIAL
UD-6
UD-8
UD-8
UD-8
UD-8H
UD-10
UD-10
UD-15
UD-10H
●
●
●
1/4"
1/8"
1/4"
1/4"
1/4"
3/8"
3/8"
1/2"
3/8"
0.23
0.23
0.58
0.79
0.18
0.58
0.79
0.58
0.45
2.5mm
2.5mm
4mm
6mm
1.2mm
4mm
8mm
8mm
2mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +130°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +130°C
0~7
0~7
0~3
0~1
0~3
0~3
0~20
0~10
0~20
0~7
0~7
0~3
0~1
0~20
0~10
0~3
0~3
0~20
0~7
0~7
0~3
0~1
0~3
0~3
0~20
0~10
0~20
0~7
0~7
0~3
0~1
0~20
0~10
0~3
0~5
0~20
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
41
41
41
41
41
53
53
53
53
66
66
66
66
66
75
90
90
75
21.5
21.5
21.5
21.5
21.5
48
48
48
48
0.32
0.31
0.31
0.31
0.31
0.53
0.65
0.64
0.54
●
●
●
14
SOLENOID VALVE
www.unid.com.tw
UDSeries
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
Waterproof
DIN/flying
lead Coil
NASS
DIN Coil
(IP65)
CV ORIFICE
PIPE
SIZE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
NBR
16. US AC110- - - --
8:1/4"
10:3/8"
6
ST:Steam
ST
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
•
• Viscosity over 50cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
SPECIFICATION
MATERIAL:
Valve bodyCoil Tube Spring Core Plug O-ring
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
PARTS
MATERIAL
US series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
• Able to operate under no differential pressure
• Material PTFE is applied to steam.
•
Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• The temperature of steam should not over 185℃
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
•
PTFEPTFE
US-10 ● 3/8" 0.23 4mm -5°C ~ +185°C 0~10 0~10 53 75 48 0.54
L L
D D
H
H
US8US10
L1
D1
US-8
US-10
23
20
19.3
21
M4x0.7
M5x0.8
MD1L1
US-6~10
NC
6:1/8"
US-8 1/4" 0.23 2.5mm -5°C ~ +185°C 0~7 0~7 41 66 21.5 0.32●
US-6 1/8" 0.23 2.5mm -5°C ~ +185°C 0~7 0~7 41 66 21.5 0.32●
15
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
Voltage
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
17. NC
D1
L1 L
H
D
UA-8
UA-10
23
20
19.3
21
M4x0.7
M5x0.8
MD1L1
Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
•
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
UA-8~10
•
• Applied fluid type : water, air , vacuum
• Able to operate under no differential pressure
• Applied to the equipment need to exhaust after power-off.
• Acceptable for customization : Viton (130℃) for seal plug
UA series is direct-acting, conductive, and normally closed (NC) 3/2 way solenoid valve.
•
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Before pipelining, the pipe line must be very clean without any contaminants or impurity.
UA-8
UA-10 ● 3/8"
1/4" 0.1
0.12
1.2mm
1.5mm
-5°C ~ +80°C
-5°C ~ +80°C
0~10
0~10
0~10
0~10
-3
0~10
-3
0~10
41
53
87
93
21.5
48
0.38
0.57
UA AC110- - - --8
10:3/8"
8:1/4"
□ : Standard (water, air)
VA : vacuum
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
16
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
Valve bodyCoil Tube Spring Core Plug O-ring
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR (PTFE)(Viton, Silicone,
PTFE)
PARTS
MATERIAL
NBR
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Water Air Steam Light oil Gas
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
18. UAO-8
UAO-10
UAO-15
●
●
●
3/8"
1/4"
1/2"
2.5
2.5
2.5
10mm
10mm
10mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0.5~15
0.5~15
0.5~15
0.5~15
0.5~15
0.5~15
0.5~15
0.5~15
0.5~15
50
50
54
95
95
100
48
48
48
1.13
1.1
1.23
UAO AC110- - - --8
10:3/8"
8:1/4"
□ : Standard (water, air)
HO: Heavy oil
15:1/2"
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
UAO-8~15
A° L
H
D
L1
18
18
55°
55°
M6x1.0
M6x1.0
UAO-8 55°
M6x1.0UAO-10
UAO-15
18
MAL1
NC
17
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
• Corrosive fluid
• Viscosity over 50cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UAO series is multiplex, piston guiding, conductive, and normally closed (NC) 2/2 way
solenoid valve.
• Applied fluid type : water, air, heavy oil
• Recommend to apply to frequent operation
• Applied to sand blasting machine and high-pressure air and oil injection system.
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants impurity.
• To extend the lifetime, Y-line filter should be installed in the front end
of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Valve bodyCoil Tube Spring Core Plug
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL (Viton, Silicone,
PTFE)
NBR
Piston plug
NBR
Piston
Brass
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Llight oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
MATERIAL:
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
19. PTFE PTFE
AC
DC
USS-15
USS-15
1/2"
1/2"
3
3
14mm
14mm
-5°C ~ +185°C
-5°C ~ +185°C
0~8
0~5
0~10
0~7
0~10
0~7
0~7
0~5 63
63
108
108
48
48 0.83
0.83
L
H
D
USS AC110
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
- - - --
15:1/2"
15
□ : Standard (steam)
LO : Light oil
W : Water, air
USS-15
NC
18
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
• Corrosive fluid
• Viscosity over 50cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• USS series is direct-acting, piston guiding, conductive, and normally closed (NC) 2/2 way
solenoid valve.
• Recommend to apply to frequent operation
• Applied fluid type : water, air, steam, light oil
• Before pipelining, the pipe line must be very clean without any contaminants or any
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• The temperature of steam should not over 185℃
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Valve bodyCoil Tube Spring Core Plug
Cast
Bronze
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Piston plugPiston
Brass
MATERIAL:
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
Waterproof
DIN/flying
lead Coil
UDSeries
20. UPS AC110- - - --15
15:1/2"
20:3/4"
25:1"
: Standard (steam)
LO : Light oil
W : Water, air
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
UPS-15~25
Piston Spring
Stainless
steel
UPS-15
UPS-20
UPS-25 ●
●
●
●
●
●
3/4"
1/2"
1"
4.0
6.0
12
17mm
17mm
22mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
82
82
100
118
120
135
48
48
48
1.32
1.44
2.13
L
H
D
NC
19
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
• Corrosive fluid
• Viscosity over 20 cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UPS series is multiplex, piston guiding, conductive and normally closed (NC) 2/2 way solenoid valve.
• Recommend to apply to frequent operation
• Applied fluid type : water, air, steam, light oil
• Acceptable for customization Viton , Silicone and EPDM for seal plug
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end
of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
PTFE
Coil Tube Spring Core Plug
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Piston
Brass PTFE
Piston plug Valve body
Cast
Bronze
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
MATERIAL:
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
21. UG-10~50
UG AC110- - - --10
G: gas
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
10:3/8"
G
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
UG-10
UG-15
UG-20
UG-25
UG-35
UG-40
UG-50
●
●
●
●
●
●
●
●
●
●
●
1/2"
3/8"
3/4"
1"
1 1/4"
1 1/2"
2"
4.5
4.5
8.6
12
24
28
48
15mm
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~7
0~7
0~7
0~7
0~7
0~7
0~7
70
70
73
100
125
125
167
100
100
102
112
113
118
125
48
48
48
48
48
48
48
1.01
1
1.13
1.7
2.32
2.53
4.32
L
H
D
NC
20
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UG series is direct, multiplex, connected diaphragm, conductive and normally closed (NC)
2/2 way solenoid valve.
• Able to operate under no differential pressure
• Applied fluid type : gas
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
NBR NBR
Valve bodyCoil Tube Spring Core Plug
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Diaphragm
MATERIAL:
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H DWater Air Wteam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
22. UV-10~50
UV-10
UV-15
UV-20
UV-25
UV-35
UV-40
UV-50
●
1/2"
3/8"
3/4"
1"
1 1/4"
1 1/2"
2"
4.5
4.5
8.6
12
24
28
48
15mm
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
1.01
1
1.13
1.7
48
48
48
48
100
100
102
112
70
70
73
100
125
125
167
●
● ●
● ●
● ●
-5°C ~ +80°C
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
UV AC110- - - --10
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
10:3/8"
VA
Operating Fluid:
VA: Vacuum
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
L
H
D
48
48
48
113
118
125
2.32
2.53
4.32
●
●
●
NC
21
SOLENOID VALVE
www.unid.com.tw
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UV series is direct, multiplex, connected diaphragm, conductive and normally closed (NC)
2/2 way solenoid valve.
• Able to operate under no differential pressure
• Applied fluid type : vacuum
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
MATERIAL:
NBR NBR
Valve bodyCoil Tube Spring Core Plug
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Diaphragm
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
23. UW AC110- - - --10
□ : Standard (water, air)
LO : Light oil10:3/8"
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
UW-10
UW-15
UW-20
UW-25
UW-35
UW-40
UW-50
●
1/2"
3/8"
3/4"
1"
1 1/4"
1 1/2"
2"
4.5
8.6
12
24
28
48
15mm
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~5
0~5
0~5
0~5
0~5
0~5
0~5
1.01
1
1.14
1.7
2.32
2.53
4.32
48
48
48
48
48
48
48
100
100
107
112
113
118
125
70
70
73
100
125
125
167
0~7
0~7
0~7
0~7
0~7
0~7
0~7
● ●
● ●
● ●
● ●
●
●
0.5~10
0.5~10
-5°C ~ +80°C
4.5
UW-10~50
L
H
D
NC
22
SOLENOID VALVE
www.unid.com.tw
0~5
0~5
0~5
0~5
0~5
0~5
0~5
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
MODEL
Coil
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC)
2/2 way solenoid valve.
• Able to operate under low pressure
• Applied fluid type : water, air, light oil
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for seal
plug and diaphragm
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
MATERIAL:
NBR NBR
Valve bodyCoil Tube Spring Core Plug
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Diaphragm
Weight
(kg)
Dimension (mm)
L H DWater Air Light oil
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Water Air
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
● High Pressure Type Use N/O Coil
High Pressure
Type
UDSeries
24. L
H
D
UWF AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - --10
□ : Standard (water, air)
LO : Light oil10:3/8"
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
UWF-10~50
UWF-10
UWF-15
UWF-20
UWF-25
UWF-35
UWF-40
UWF-50
●
●
●
●
●
●
●
●
●
●
●
1/2"
3/8"
3/4"
1"
1 1/4"
1 1/2"
2"
2.4
4.5
8.6
12
24
28
48
15mm
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
151
158
158
200
100
110
110
100
100
107
112
113
118
125
48
48
48
48
48
48
48
2.12
2.63
4.1
5.9
6.4
9.2
2.12
NC
23
SOLENOID VALVE
www.unid.com.tw
0~5
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0~7
0.5~10
0.5~10
0~5
0~5
0~5
0~5
0~5
0~5
0~5
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
MODEL
Coil
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• series is direct, multiplex, connected diaphragm, conductive and normally closed (NC)
2/2 way solenoid valve.
• Able to operate under low pressure
• Applied fluid type : water, air, light oil
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for seal
plug and diaphragm
UWF
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
MATERIAL:
NBR NBR
Valve bodyCoil Tube Spring Core Plug
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Diaphragm
Weight
(kg)
Dimension (mm)
L H DWater Air Light oil
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Water Air
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
● High Pressure Type Use N/O Coil
High Pressure
Type
UDSeries
25. L
H
D
UAW-15~50
PTFE
+15%GF
NBR
UAW-15
UAW-20
UAW-25
UAW-35
UAW-40
UAW-50
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~15
0.5~15
0.5~15
1~15
1~15
1~15
82
82
91
111
111
163
125
125
133
141
144
175
58
58
58
58
58
58
1.6
1.67
2.02
3.08
3.1
6.82
Water, Air
UAW AC110- - - -15
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NC
24
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
Valve bodyCoil Tube Spring Plug
Cast
Bronze
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
MATERIAL:
Piston plug
Brass
PistonCore
Stainless
steel
• Corrosive fluid
• Viscosity over 50 cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• UAW series is multiplex, piston guiding, conductive and normally closed (NC)
2/2 way solenoid valve.
• Applied fluid type : water, air
2
• Minimum pressure to open: over 0.5~1kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
26. PTFE
+15%GF
PTFE
Valve bodyCoil Tube Spring Plug
Cast
Bronze
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Piston plug
Brass
PistonCore
Stainless
steel
US-15
US-20
US-25
US-35
US-40
US-50
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
82
82
91
111
111
163
125
125
133
141
144
175
58
58
58
58
58
58
1.6
1.67
2.02
3.08
3.1
6.82
L
H
D
US AC110- - - -15
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
□ : Standard (steam)
LO : Light oil
HO : Heavy oil
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
US-15~50
NC
25
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
Corrosive fluid
Viscosity over 20 cst
•
•
•
Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
US series is multiplex, piston guiding, conductive and normally closed (NC)
2/2 way solenoid valve.
Applied fluid type : steam, heavy oil
•
•
•
•
•
2
Minimum pressure to open: over 0.5~1kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or impurity.
To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
27. L
H
D
USF AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -15
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
□ : Standard (steam)
HO : Heavy oil
USF-15~50
USF-15
USF-20
USF-25
USF-35
USF-40
USF-50
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
110
110
120
144
144
196
125
125
133
141
144
175
58
58
58
58
58
58
2.8
3.2
4.4
6.3
6.5
10.9
NC
26
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
FluidPipe
Size
Voltage
MATERIAL:
•
• Corrosive fluid
• Viscosity over 20 cst
Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
USF series is multiplex, piston guiding, conductive and normally closed (NC)
2/2 way solenoid valve.
Applied fluid type : water, air, steam, heavy oil
2
• Minimum pressure to open: over 0.5~1kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or .
• Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
impurity
To extend the lifetime,
PTFE
+15%GF
PTFE
Valve bodyCoil Tube Spring Plug
Cast
Bronze
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
Piston plug
Brass
PistonCore
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
28. L
H
D
NW-35~50
NW-35
NW-40
NW-50 ●
●
●
●
●
● 1 1/2"
1 1/4"
2"
24
28
48
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~5
0.5~5
0.5~5
130
130
165
145
150
158
54
54
54
3.39
3.49
5.08
NW AC110- - - --
35:1 1/4"
40:1 1/2"
50:2"
35
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
NC
27
SOLENOID VALVE
www.unid.com.tw
□ : STANDARD (WATER, AIR)
LO : LIGHT OIL
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
Coil
MATERIAL:
•
• Corrosive fluid
• Viscosity over 20 cst
Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
•
NW series is multiplex, piston guiding, conductive and normally closed (NC)
2/2 way solenoid valve.
Applied fluid type : water, air, light oil
With NASS DIN Coil (IP 65)
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or .
• Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
impurity
To extend the lifetime,
NBR NBR
Valve bodyCoil Tube Spring Plug
Cast
Bronze
NASS DIN Coil
(IP 65)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
UDSeries
29. 45°
ØD1 P.C.D
ØD2
L
H
D
UDC-8
UDC-10
UDC-15
45 5.2
D2D1
45
45
5.2
5.2
UDC AC110- - - --8
Corrosive fluid
8:1/4"
10:3/8"
15:1/2"
20:3/4"
25:1"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
UDC-8~25
UDC-8
UDC-10
UDC-15
UDC-20
UDC-25
●
●
●
3/8"
1/4"
1/2"
3/4"
1"
0.28
0.28
0.28
3.5
3.5
6.5mm
6.5mm
10mm
10mm
6.5mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~1
0~1
0~1
0~1
0~1
0~1
0~1
0~1
0~1
0~1
50
50
55
76
76
90
90
93
119
119
48
48
48
58
58
0.53
0.52
0.58
1.84
1.8
NC
28
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
Coil
MATERIAL:
•
• Viscosity over 20 cst
Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
•
•
UDC series is direct-acting, conductive and normally closed (NC) 2/2 way solenoid valve.
Able to operate under no differential pressure
Applied fluid type : water, air
PVC valve body is corrosion-resistant (pH 3~11)
• Before pipelining, the pipe line must be very clean without any contaminants or .
• Y-line filter should be installed in the front end of solenoid valve.
•
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
impurity
To extend the lifetime,
No frequent operation
Synthetic
rubber
PTFE
Valve bodyCoil Tube Spring Oring
PVCSpecial copper
wire (H)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
30. 45°
ØD1 P.C.D
ØD2
L
H
D
UDC-8-TF
UDC-10-TF
UDC-15-TF
45 5.2
D2D1
45
45
5.2
5.2
UDC AC110- - - --8
Corrosive fluid
8:1/4"
10:3/8"
15:1/2"
20:3/4"
25:1"
TF -
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
UDC-8-TF~25-TF
UDC-8-TF
UDC-10-TF
UDC-15-TF
UDC-20-TF
UDC-25-TF
●
●
●
3/8"
1/4"
1/2"
3/4"
1"
0.28
0.28
0.28
4
4
6.5mm
6.5mm
13mm
13mm
6.5mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~0.5
0~1
0~1
0~1
0~0.5
0~0.5
0~1
0~1
0~1
0~0.5
50
50
55
76
76
90
90
93
119
119
48
48
48
58
58
0.53
0.52
0.58
1.76
1.73
NC
29
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
• Viscosity over 20 cst
Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
•
•
UDC-TF series is direct-acting, conductive and normally closed (NC) 2/2 way solenoid valve.
Able to operate under no differential pressure
Applied fluid type : water, air
PTFE valve body is corrosion-resistant (pH 0~14)
• Before pipelining, the pipe line must be very clean without any contaminants or .
• Y-line filter should be installed in the front end of solenoid valve.
•
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
impurity
To extend the lifetime,
No frequent operation
Synthetic
rubber
PTFE
Valve bodyCoil Tube Spring Oring
PTFESpecial copper
wire (H)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
31. SUS-6
SUS-8
SUS-10
23
23
20
19.3
19.3
21
M4x0.7
M4x0.7
M5x0.8
MD1L1
L L
D D
H
H
SUS6~8SUS10
L1
D1
SUS AC110- - - --
6:1/8"
8:1/4"
10:3/8"
6
□ :
G : Gas
LO : Light oil
VA : Vacuum
W : water, air
Standard (steam)
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
SUS-6~10
● Plug Material: PTFE
● Plug Material: NBR
SUS-6
SUS-8
SUS-10
SUS-6
SUS-8
SUS-10 ● ●
1/4"
1/8"
3/8"
1/8"
1/4"
3/8"
0.23
0.23
0.58
0.23
0.23
0.58
2.5mm
2.5mm
4mm
4mm
2.5mm
2.5mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~7
0~7
0~7
0~7
0~10
0~10
0~7
0~7
0~10
0~7
0~7
0~10
0~7
0~7
0~10
0~7
0~7
0~10
0~7
0~7
0~10
-3
0~10
-3
0~10
-3
0~10
41
41
53
41
41
53
68
68
83
68
68
83
21.5
21.5
48
48
21.5
21.5
0.34
0.33
0.54
0.34
0.33
0.54
NC
●
●
● ●
●
●
30
SOLENOID VALVE
www.unid.com.tw
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 50cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
•
•
•
•
SUS series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
Able to operate under no differential pressure
Applied fluid type : water, air, steam, light oil, gas, vacuum
Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for seal plug.
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• The temperature of steam should not over 185℃
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
PTFE(standard)
NBR
Valve bodyCoil Tube Spring Plug
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
O-ringCore
Stainless
steel
PTFE(standard)
NBR
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
32. L
H
D
vacuum
Torr
SUW-15~50
SUW-15
SUW-20
SUW-25
SUW-35
SUW-40
SUW-50 ●
●
●
●
●
●
●
●
●
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.5
8.6
12
24
28
48
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0.5~10 -3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
70
76
100
123
123
167
100
100
115
112
112
125
48
48
48
48
48
48
1
1.1
1.65
2.33
2.54
4.59
SUW AC110- - - --15
□ : Standard (water, air)
G : Gas
LO : Light oil
VA : Vacuum
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NC
31 www.unid.com.tw
SOLENOID VALVE
● High Pressure Type Use N/O Coil
0~5
0~5
0~5
0~5
0~5
0~5
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUW series is direct, multiplex, connected diaphragm, conductive and normally
closed (NC) 2/2 way solenoid valve.
• Able to operate under low pressure
• Applied fluid type : water, air, light oil, gas, vacuum
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃)
for seal plug and diaphragm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
NBR
Valve bodyCoil Tube Spring Plug
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
NBR
Weight
(kg)
Dimension (mm)
L H DWater Air Light oil
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
OperatingPressurekgf/cm (bar)
Water Air
High Pressure
Type
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
SPECIFICATION
UDSeries
33. L
H
D
SUWF AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - --15
□ : Standard (water, air)
G : Gas
LO : Light oil
VA : Vacuum
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
SUWF-15~50
SUWF-15
SUWF-20
SUWF-25
SUWF-35
SUWF-40
SUWF-50
●
●
●
●
●
●
●
●
●
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
4.5
8.6
12
24
28
48
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0~5
0~5
0~5
0~5
0~5
0~5
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
151
170
170
211
110
120
100
100
115
112
112
125
48
48
48
48
48
48
2.5
4.1
6.1
6.7
9.51
2.2
NC
32www.unid.com.tw
SOLENOID VALVE
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
0.5~20
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUWF series is direct, multiplex, connected diaphragm, conductive and normally
closed (NC) 2/2 way solenoid valve.
• Able to operate under low pressure
• Applied fluid type : water, air, light oil, gas, vacuum
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃)
for seal plug and diaphragm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
NBR
Valve bodyCoil Tube Spring Plug
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
NBR
vacuum
Torr
Weight
(kg)
Dimension (mm)
L H DWater Air Light oil
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
OperatingPressurekgf/cm (bar)
Water Air
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
SPECIFICATION
High Pressure
Type
● High Pressure Type Use N/O Coil
UDSeries
34. L
H
D
SUS-15~50
Valve bodyPlug
PTFE PTFE
Piston plugPiston Spring Piston
Stainless
steel
SUS-15
SUS-20
SUS-25
SUS-35
SUS-40
SUS-50
●
●
●
●
●
●
●
●
●
●
●
●
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
84
84
98
123
123
167
115
120
132
142
146
173
48
48
48
48
48
48
1.38
1.43
1.88
2.62
2.72
5.45
SUS AC110- - - --15
□ : Standard (steam)
LO : Light oil
W : Water, air
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NC
33 www.unid.com.tw
SOLENOID VALVE
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUS series is multiplex, piston guiding, conductive and normally closed (NC) 2/2 way
solenoid valve.
• Applied fluid type : water, air, steam, light oil
• Recommend to apply to frequent operation
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
MODEL
Operating
Fluid
ThreadPipe
Size
Voltage
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
35. L
H
D
SUSF AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -15 -
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
SUSF-15~50
SUSF-15
SUSF-20
SUSF-25
SUSF-35
SUSF-40
SUSF-50
●
●
●
●
●
●
●
●
●
●
●
●
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
0.5~10
0.5~10
0.5~10
1~10
1~10
1~10
149
170
170
211
120
120
115
120
132
142
146
173
48
48
48
48
48
48
3
4.3
5.6
6.1
9.6
2.5
NC
□ : Standard (steam)
LO : Light oil
W : Water, air
34www.unid.com.tw
SOLENOID VALVE
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUSF series is multiplex, piston guiding, conductive and normally closed
(NC) 2/2 way solenoid valve.
• Applied fluid type : water, air, steam, light oil
• Recommend to apply to frequent operation
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃)
for seal plug
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Valve bodyPlug
PTFE PTFE
PistonplugPistonSpring Piston
Stainless
steel
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
36. D
L
H
SUW AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -80
□ : Standard (water, air)
LO : Light oil80:3"
F
SUW-80F
SUW-80F 3" 100 80mm -5°C ~ +80°C 0.5~8 0.5~8 0.5~5 240 188 58 15.9
NC
35 www.unid.com.tw
SOLENOID VALVE
MODEL
Operating
FluidPipe
Size
Voltage
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUW-F series is multiplex, piston guiding, conductive and normally closed
(NC) 2/2 way solenoid valve.
• Applied fluid type : water, air, light oil
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid
valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
NBR
Valve bodyCoil Tube Spring Plug
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
NBR
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
JIS10K
Flange
End
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
37. H
D
L
SUS AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -80
□ : Standard (water, air)
LO : Light oil
JIS10K
80:3"
F
SUS-80F
SUS-80F 3" 100 80mm -5°C ~ +185°C 1~10 1~10 1~10 1~10 240 232 58 19.9
NC
36www.unid.com.tw
SOLENOID VALVE
MODEL
Operating
FluidPipe
Size
Voltage
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUS-F series is multiplex, piston guiding, conductive and normally closed
(NC) 2/2 way solenoid valve.
• Applied fluid type : water, air, light oil
2
• Minimum pressure to open: over 1kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime,, Y-line filter should be installed in the front end of solenoid
valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Valve bodyPlug
PTFE PTFE
PistonplugPistonSpring Piston
Stainless
steel
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Flange
End
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
38. L
H
D
UW AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -35
□ : Standard (water, air)
LO : Light oil
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
35:1 1/4"
40:1 1/2"
50:2"
65:2 1/2"
80:3"
100:4"
-F
UW-35F~100F
UW-35F
UW-40F
UW-50F
UW-65F
UW-80F
UW-100F ●
●
●
●
●
● 1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
22
30
40
68
102
180
35mm
40mm
50mm
65mm
80mm
100mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~5
0.5~5
0.5~5
0.5~5
0.5~5
0.5~5
210
240
300
340
200
200
164
164
170
177
191
207
48
48
48
48
48
48
9.6
11.3
15.6
20.8
31.7
8.9
NC
37 www.unid.com.tw
SOLENOID VALVE
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUW series is multiplex, piston guiding, conductive and normally closed (NC)
2/2 way solenoid valve.
• Applied fluid type : water, air, light oil
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime,Y-line filter should be installed in the front end of solenoid
valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
NBR
Valve bodyCoil Tube Spring Plug
Cast Iron
(FC-20)
Special copper
wire (H class)
Stainless
steel
Stainless
steel
PARTS
MATERIAL
DiaphragmCore
Stainless
steel
NBR
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
39. L
H
D
US AC110
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
- - - -35
□ : Standard (steam)
LO : Light oil
W : Water, air
35:1 1/4"
40:1 1/2"
50:2"
65:2 1/2"
80:3"
100:4"
-F
US-35F~100F
US-35F
US-40F
US-50F
US-65F
US-80F
US-100F ●
●
●
●
●
● 1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
22
30
40
68
100
175
35mm
40mm
50mm
65mm
80mm
100mm
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
-5°C ~ +185°C
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
1~10
210
240
300
340
200
200
189
189
202
209
228
244
48
48
48
48
48
48
10.9
13.2
19.2
27
38.7
10.7
NC
38www.unid.com.tw
SOLENOID VALVE
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
PRODUCT DESCRIPTION
CAUTIONS:
Not Suitalbe For Fluid As Below:
• SUW series is multiplex, piston guiding, conductive and normally closed (NC) 2/2 way solenoid valve.
• Applied fluid type : water, air, light oil
• Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for seal plug
2
• Minimum pressure to open: over 0.5kgf-cm
• Before pipelining, the pipe line must be very clean without any contaminants or
impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid
valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Valve bodyPlug
PTFE PTFE
Piston plugPiston Spring
Cast Iron
(FC-20)
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
UDSeries
40. ● Multiplex, Pilot Operated Diaphragm Diagram
● Multiplex, Pilot Operated Piston Diagram
● Direct-Multiplex, Pilot Operated Piston Diagram
● Direct-Multiplex, Connected Diaphragm Diagram
● Direct-Acting type Diagram
NormallyClosedType-OptionalItems
39 www.unid.com.tw
SOLENOID VALVE
N/CType-OptionalItems
41. Optional
Items
Please confirm the solenoid valve model number, and take the Coil Matching
Table for reference.
Please always feel free to contact us for any further questions.
Coil set Piston, Spring set
Tube set
Core, Spring set
Diaphragm, Connected spring set
40www.unid.com.tw
SOLENOID VALVE
N/CType-OptionalItems
42. Direct-Acting type
Diagram
Multiplex, Pilot Operated
Diaphragm Diagram
Normally Closed(N/C) Series
Coil set
Tube set
Core, Spring set
Valve body
Diaphragm,
Connected spring set
41 www.unid.com.tw
SOLENOID VALVE
Coil set
Tube set
Core, Spring set
Valve body
Coil set
Core, Spring set Valve
body
Coil set
Tube set
Core, Spring set
Valve
body
Diaphragm,
Connected spring set
Coil set
Tube set
Core, Spring set
Valve
body
N/CType-OptionalItems
43. Piston,
The spring set
Core, Spring set
Tube set
Coil set
Core
Core Valve body
Coil set
Tube set
Tube set
Valve body
Piston,
the spring set
Coil set
Core
Tube set
Coil set
Valve body
Core,
Spring set
Piston,
The spring set
Coil set
Tube setCore, Spring set
Valve body
Multiplex, Pilot Operated
Piston Diagram
Normally Closed(N/C) Series
Piston,
The spring set
42www.unid.com.tw
SOLENOID VALVE
N/CType-OptionalItems
44. Valve body
Tore, Spring set
Diaphragm,
Connected spring set
Tube set
Coil set
Core, spring set
Valve body
Diaphragm,
Connected spring set
Tube set
Coil set
Piston,Core set
Coil set
Tube set
Valve body
-Direct-Multiplex, Pilot Operated
Piston Diagram
-Direct-Multiplex, Connected
Diaphragm Diagram
Normally Closed(N/C) Series
43 www.unid.com.tw
SOLENOID VALVE
N/CType-OptionalItems
46. L
H
D
L1
D1
UD-6NO
UD-8NO
UD-10NO
23
23
20
19.3
19.3
21
M4x0.7
M4x0.7
M5x0.8
MD1L1
UD AC110- - - --
6:1/8"
8:1/4"
10:3/8"
6
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
NO
UD-6NO~10NO
UD-6 NO
UD-8 NO
UD-8 NO
UD-8 NO
UD-8H NO
UD-10 NO
1/4"
1/8"
1/4"
1/4"
1/4"
3/8"
0.23
0.23
0.58
0.79
0.18
0.58
2.5mm
2.5mm
4mm
6mm
1.2mm
4mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +130°C
-5°C ~ +80°C
0~7
0~7
0~3
0~1
0~20
0~10
0~7
0~7
0~3
0~1
0~20
0~10
0~7
0~7
0~3
0~1
0~20
0~10
0~7
0~7
0~3
0~1
0~20
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
41
41
41
41
41
53
87
87
87
87
87
105
21.5
21.5
21.5
21.5
21.5
48
0.44
0.43
0.43
0.43
0.43
0.7
NO
●
45 www.unid.com.tw
●UD-6~UD-8 NO Voltage: DC24V , (H): 79.5mm
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
G : Gas
LO : Light oil
VA : Vacuum
: Standard (water, air)
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
• UDNO series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
• Able to operate under no differential pressure
• Applied fluid type : water, air, light fuel, gas, vacuum
• Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃)
for seal plug and diaphragm
PRODUCT DESCRIPTION
•
impurity.
• To extend the lifetime, Y-type filter at the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Before pipelining, the pipe line must be very clean without any contaminants or
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20cst
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug O-ring
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR (PTFE)
PARTS
MATERIAL (Viton, Silicone,
PTFE)
NBR
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
47. L
H
D
L
H
D UW-10~25NO
UW-35~50 NO
UW AC110- - - --10
□ : Standard (water, air)
LO : Light oil10:3/8"
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NO
UW-10NO~50NO
UW-10 NO
UW-15 NO
UW-20 NO
UW-25 NO
UW-35 NO
UW-40 NO
UW-50 NO
●
●
●
●
●
●
●
1/2"
3/8"
3/4"
1"
1 1/4"
1 1/2"
2"
4.5
8.6
12
24
28
48
4.5 15mm
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~5
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0~7
0~5
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0~7
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
70
70
73
100
125
125
167
128
128
133
138
139
145
156
48
48
48
48
48
48
48
0.98
1.12
1.7
2.5
2.9
4.5
1
NO
46www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
• UW-NO series is direct, multiplex, connected diaphragm, conductive and normally closed
(NC) 2/2 way solenoid valve.
• Able to operated directly under low pressure
• Applied fluid type : water, air, light oil
• Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃) for seal
plug and diaphragm
PRODUCT DESCRIPTION
•
impurity
• To extend the lifetime,
•
•
Before pipelining, the pipe line must be very clean without any contaminants
or .
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20cst
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Forged
Brass
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
48. L
H
D
UPS AC110- - - --15
□ : Standard (steam)
LO : Light oil
W : Water, air
15:1/2"
20:3/4"
25:1"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NO
UPS-15NO~25NO
UPS-15 NO
UPS-20 NO
UPS-25 NO ●
●
●
3/4"
1/2"
1"
4.0
6.0
12
17mm
17mm
22mm
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~8
0.5~8
0.5~8
82
82
100
150
152
165
48
48
48
1.46
1.58
2.3
NO
47 www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
• Recommend to apply to frequent operation
• Applied fluid type
• for seal plug and diaphragm
2/2 way solenoid valve.
: water, air, steam, light oil
Acceptable for customize Viton , Silicone and EPDM
UPS-NO series is multiplex, , conductive and normally closed (NC)piston guiding
PRODUCT DESCRIPTION
•
• impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or .
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20 cst
Not Suitalbe For Fluid As Below:
Valve bodyPlug
VITON PTFE
PistonplugPistonSpring Piston
Forged
Brass
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Brass
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
NormallyOpenType
Waterproof
DIN/flying
lead Coil
49. L
H
D
L1
D1
SUS-6NO
SUS-8NO
SUS-10NO
23
23
20
19.3
19.3
21
M4x0.7
M4x0.7
M5x0.8
MD1L1
SUS AC110- - - --
6:1/8"
8:1/4"
10:3/8"
6
□ : Standard (steam)
G : Gas
LO : Light oil
VA : Vacuum
W : Water, air
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NO
SUS-6 NO~10NO
SUS-6 NO
SUS-8 NO
SUS-10 NO
1/8"
1/4"
3/8"
0.23
0.23
0.58 4mm
2.5mm
2.5mm
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
0~7
0~7
0~10
0~7
0~7
0~10
0~7
0~7
0~7
0~7
0~7
0~10
-3
0~10
-3
0~10
-3
0~10
41
41
53
87
87
105
21.5
21.5
48
0.34
0.33
0.54
NO
●
0~7
0~7
0~7
48www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
• Able to operate under no differential pressure
• Applied fluid type
•
for seal plug and diaphragm
: water, air, steam, light fuel, gas, vacuum
Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃)
SUS series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
PRODUCT DESCRIPTION
•
impurity
• To extend the lifetime,
•
•
•
Before pipelining, the pipe line must be very clean without any contaminants or
.
Y-type filter at the front end of solenoid valve.
The temperature of steam should not over 185℃
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 50cst
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug O-ring
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL VITON
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
50. L
H
D
L
H
D SUW15~25 NO
SUW-35~50 NO
SUW AC110- - - --15
□ : Standard (water, air)
G : Gas
LO : Light oil
VA : Vacuum
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:1/2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NO
SUW-15NO~50NO
SUW-15 NO
SUW-20 NO
SUW-25 NO
SUW-35 NO
SUW-40 NO
SUW-50 NO ●
●
●
●
●
●
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.5
8.6
12
24
28
48
15mm
20mm
25mm
35mm
40mm
50mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
0~5
0~5
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~7
0~7
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
-3
0~10
70
76
100
123
123
167
126
132
139
140
140
150
48
48
48
48
48
48
1
1.1
1.65
2.5
2.7
4.73
NO
49 www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
•
• Applied fluid type
• for seal
plug and diaphragm
(NC) 2/2 way solenoid valve.
Able to operated directly under low pressure
: water, air, light oil, gas, vacuum
Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃)
SUW-NO series is direct, multiplex, connected diaphragm, conductive and normally closed
PRODUCT DESCRIPTION
•
impurity
• To extend the lifetime
•
•
Before pipelining, the pipe line must be very clean without any contaminants or
.
, Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20cst
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
51. L
H
D
SUS AC110- - - --15
□ : Standard (steam)
LO : Light oil
W : Water, air
15:1/2"
20:3/4"
25:1"
35:1 1/4"
40:1 1/2"
50:2"
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
NO
SUS-15NO~50NO
SUS-15 NO
SUS-20 NO
SUS-25 NO
SUS-35 NO
SUS-40 NO
SUS-50 NO
●
●
●
●
●
●
3/4"
1/2"
1"
1 1/4"
1 1/2"
2"
4.0
6.0
12
18
22
48
17mm
17mm
22mm
30mm
30mm
50mm
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
0.5~10
0.5~10
0.5~10
1~10
1~10
1~8
0.5~10
0.5~10
0.5~10
1~10
1~10
1~8
0.5~10
0.5~10
0.5~10
1~10
1~10
1~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
84
84
98
123
123
167
147
151
162
173
175
203
48
48
48
48
48
48
1.52
1.58
2
2.8
2.9
5.7
NO
50www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
• Recommend to apply to frequent operation
• Applied fluid type
• for seal plug and diaphragm
(NC) 2/2 way solenoid valve.
: water, air, steam, light oil
Acceptable for customize Viton , Silicone and EPDM
SUS-NO series is multiplex, , conductive and normally closedpiston guiding
PRODUCT DESCRIPTION
•
•
impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or
.
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20 cst
Not Suitalbe For Fluid As Below:
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Valve bodyPlug
VITON PTFE
PistonplugPistonSpring Piston
Stainless
steel
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
52. L
H
D
SUW AC110
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
- - - -80
□ : Standard (water, air)
LO : Light oil80:3"
NOF
SUW-80FNO
SUW-80F NO 3" 100 80mm -5°C ~ +80°C 0.5~8 0.5~8 0.5~5 240 205 58 16
NO
51 www.unid.com.tw
SOLENOID VALVE
JIS10K
MODEL
Operating
Fluid
Pipe
Size
Voltage
Flange
End
MATERIAL:
• piston guiding
• Applied fluid type
SUW-FNO series is multiplex, , conductive and normally closed
(NC) 2/2 way solenoid valve.
: water, air, light oil
PRODUCT DESCRIPTION
•
•
impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or
.
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20cst
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Stainless
steel
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
53. L
H
D
SUSF AC110- - - -80
□ : Standard (water, air)
LO : Light oil
NOF
SUS-80FNO
SUS-80F NO 3" 100 80mm -5°C ~ +130°C 1~8 1~8 1~8 1~8 240 252 58 20
NO
52www.unid.com.tw
SOLENOID VALVE
AC220V(50/60)HZ
AC110V(50/60)HZ
DC24V
80:3"
JIS10K
MODEL
Operating
Fluid
Pipe
Size
Voltage
Flange
End
MATERIAL:
• piston guiding
• Applied fluid type
SUS-FNO series is multiplex, , conductive and normally closed (NC)
2/2 way solenoid valve.
: water, air, light oil
PRODUCT DESCRIPTION
•
•
impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 1kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or
.
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
•
•
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Corrosive fluid
Viscosity over 20cst
Not Suitalbe For Fluid As Below:
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
Valve bodyPlug
VITON PTFE
PistonplugPiston
Stainless
steel
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
54. L
H
D
UW AC110- - - -35
35:1 1/4"
40:1 1/2"
50:2"
65:2 1/2"
80:3"
100:4"
- -NOF
UW-35F-NO~100F-NO
UW-35F-NO
UW-40F-NO
UW-50F-NO
UW-65F-NO
UW-80F-NO
UW-100F-NO ●
●
●
●
●
● 1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
22
30
40
68
102
180
35mm
40mm
50mm
65mm
80mm
100mm
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
-5°C ~ +80°C
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~8
0.5~5
0.5~5
0.5~5
0.5~5
0.5~5
0.5~5
210
240
300
340
200
200
195
195
208
213
222
238
48
48
48
48
48
48
9.8
11.5
15.8
21
31.9
9.1
NO
53 www.unid.com.tw
SOLENOID VALVE
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V
□ : Standard (water, air)
LO : Light oil
Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• piston guiding
• Applied fluid type
• for seal
plug and diaphragm
UWF-NO series is multiplex, , conductive and normally closed (NC)
2/2 way solenoid valve.
: water, air, light oil
Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃)
PRODUCT DESCRIPTION
•
•
impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or
.
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Cast Iron
(FC-20)
Special copper
wire (H class)
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
55. L
H
D
US AC110- - - -35
□ : Standard (steam)
LO : Light oil
W : Water, air
35:1 1/4"
40:1 1/2"
50:2"
65:2 1/2"
80:3"
100:4"
- -NOF
US-35F-NO~100F-NO
●
●
●
●
●
●US-35F-NO
US-40F-NO
US-50F-NO
US-65F-NO
US-80F-NO
US-100F-NO
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
22
30
40
68
100
175
35mm
40mm
50mm
65mm
80mm
100mm
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
-5°C ~ +130°C
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
1~8
210
240
300
340
200
200
220
220
233
240
259
274
48
48
48
48
48
48
11.1
13.4
19.4
27.2
38.9
10.9
NO
54www.unid.com.tw
SOLENOID VALVE
AC220V(50/60)Hz
AC110V(50/60)Hz
DC24V Flange
End
□ : Standard (JIS 10K)
ANSI 150LB
PN 16
MODEL
Operating
FluidPipe
Size
Voltage
: Standard coil
D Waterproof (under ): o
130 C
N NASS DIN COIL (under ): o
130 C
Coil
MATERIAL:
• piston guiding
• Applied fluid type
• for seal
plug and diaphragm
USF-NO series is multiplex, , conductive and normally closed (NC)
2/2 way solenoid valve.
: water, air, light oil
Acceptable for customize Viton (130℃) , Silicone (130℃) and EPDM (130℃)
PRODUCT DESCRIPTION
•
•
impurity
• To extend the lifetime,
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants
.
Y-type filter at the front end of solenoid valve.
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyPlug
VITON PTFE
PistonplugPiston Spring
Cast Iron
(FC-20)
Coil Tube Spring
Special copper
wire (H class)
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
NormallyOpenType
56. ● Multiplex, Pilot Operated Diaphragm Diagram
● Direct-Acting type Diagram
● Direct-Multiplex, Connected Diaphragm Diagram
● Multiplex, Pilot Operated Piston Diagram
NormallyOpenType-OptionalItems
55 www.unid.com.tw
SOLENOID VALVE
N/OType-OperationalItems
57. 56www.unid.com.tw
SOLENOID VALVE
N/OType-OperationalItems
Optional
Items
Please confirm the solenoid valve model number, and take the Coil Matching
Table for reference.
Please always feel free to contact us for any further questions.
Coil set Piston, The spring set
Tube set
Pintle Pintle seat,
Diaphragm, Connected spring set
Core, Setting seat set
58. Diaphragm,
Connected spring set
Coil set
Tube set
Pintle Pintle seat,
Core, Setting seat set
Coil set
Piston, The spring set
Tube set
Pintle Pintle seat,
Core, Setting seat set
Valve body
Multiplex, Pilot Operated
Piston Diagram
Multiplex, Pilot Operated
Diaphragm Diagram
Normally open (N/O ) series
57 www.unid.com.tw
SOLENOID VALVE
Valve body
N/OType-OperationalItems
59. Normally open (N/O) series
Coil set
Tube set
Pintle Pintle seat,
Core, Setting seat set
Valve body
Diaphragm,
Connected Spring set
Direct-Acting type Diagram
Direct-Multiplex, Connected
Diaphragm Diagram
58www.unid.com.tw
SOLENOID VALVE
Coil set
Tube set
Pintle Pintle seat,
Core, Setting seat set
Valve body
N/OType-OperationalItems
61. Solenoid Valve-Explosion
Proof Series
●
Germany and it is suitable for potentially explosive atmospheres
● NASS SYSTEM13 series coil has a special element, it is applicable
for hazardous or potentially explosive atmospheres
● PTB (German national inspection combined standard grade)
certification, in line with European Union (EU) 94/9 / EG regulations
in DIN EN60079, DIN VDE0179 and IEC60079 safety regulations
Explosion proof solenoid valve is installed with NASS coil made in
60www.unid.com.tw
SOLENOID VALVE
ExplosionProofSeries
62. Solenoid Coil system 13 ATEX WITH TERMINAL BOX
Width: 52 mm
Protection by encaps: ll 2 G Ex e mb llC T4, T6 Gb
ll 2D Ex tb mb IIIC T130 °C, T80 °C Db IP 65, IP 67
Connection type: terminal box
Moulding material: thermoplastic
General Data
Voltage tolerance: ±10%
Ambient temperature: -40°C bis + 50 °C/+ 60 °C
Relative duty cycle: 100%
Insulation class of insulating materials
According to DIN VDE 0580: F
Degree of protection: IP 65/IP 67
Type examination certificate: PTB 11 ATEX 2027 X
Imprint: nass magnet (customer imprint possible)
screwed cable gland
complete- tightening torque:
1.7 Nm to 2.3 Nm
technical data
white imprinted
46.6
Ø26
Ø20
Ø10.05
45.2
51.7
O-Rung
(15.1 x 2.7)Ø20.4
Ø14.6
tightening torque:
1.4 Nm to 1.6 Nm
52
~43
※ After the wiring is completed, be sure the cable gland has
been tightened, tightening torque is 1.7Nm to 2.3Nm
※ After the wiring is completed, be sure to tighten the lid,
tightening torque is 1.4Nm to 1.6Nm
Cautions
61 www.unid.com.tw
SOLENOID VALVE
ExplosionProofSeries
63. L
H
D
SKS AC110- - - --15
□ : Standard (water, air)
AC220V(50/60)Hz
AC110V(50/60)Hz
AC24V(50/60)Hz
DC24V
15:1/2"
20:3/4"
25:1"
NC
3/4"
1/2"
1"
4.0
6.0
12
17mm
17mm
22mm
-5°C ~ +70°C
-5°C ~ +70°C
-5°C ~ +70°C
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
SKS-15~25
84
84
98
170
171
181
62
62
62
1.61
1.68
2.08
SKS-15
SKS-20
SKS-25
62www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
• piston guiding
•
• Water proof level :
• Recommend to apply to frequent operation
• Applied fluid type
SKS series is multiplex, , conductive, and normally closed (NC)2/2 way solenoid valve.
Explosion proof level: EX II2 G Ex e mb IIC T4 Gb
IP 67
: water, air, light oil
PRODUCT DESCRIPTION
•
• impurity
• To extend the lifetime,
•
•
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or .
Y-line filter should be installed in the front end of solenoid valve.
Fluid temperature should be under 70℃
Ambient temperature should be under 60℃
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyPlug
VITON PTFE
PistonplugPistonSpring Piston
Stainless
steel
Coil Tube Spring
NASS ex-proof
DIN COIL
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
NASS DIN COIL
Ii2 G Ex e mb IIC T4 Gb
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
ExplosionProofSeries
64. L
H
D
SKW AC110- - - --15
AC220V(50/60)Hz
AC110V(50/60)Hz
AC24V(50/60)Hz
DC24V
15:1/2"
20:3/4"
25:1"
□ : Standard (water, air)
G : Gas
VA : Vacuum
SKW-15~25
SKW-15
SKW-20
SKW-25
1/2"
3/4"
1"
4.5
8.6
12
15mm
20mm
25mm
-5°C ~ +70°C
-5°C ~ +70°C
-5°C ~ +70°C
0~5
0~5
0~5
0~7
0~7
0~7
0~5
0~5
0~5
-3
0~10
-3
0~10
-3
0~10
70
76
100
133
140
147
62
62
62
1.04
1.12
1.66
NC
63 www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
•
• Water proof level :
• Able to operate under the low pressure
• Applied fluid type
• seal
plug
SKW series is direct, multiplex, connected diaphragm, conductive, and normally closed
(NC)2/2 way solenoid valve.
Explosion proof Level: EX II2 G Ex e mb IIC T4 Gb
IP 67
: water, air, light oil, gas, vacuum
Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for
and diaphragm
PRODUCT DESCRIPTION
• impurity
• To extend the lifetime,
•
•
•
•
Before pipelining, the pipe line must be very clean without any contaminants or .
Y-line filter should be installed in the front end of solenoid valve.
Fluid temperature should be under 70℃
Ambient temperature should be under 60℃
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Crystallized fluid, Ex: sea water
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Stainless
steel
NASS ex-proof
DIN COIL
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
NASS DIN COIL
Ii2 G Ex e mb IIC T4 Gb
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
ExplosionProofSeries
65. L
H
D
PKS AC110- - - --15
□: Standard (water, air)
AC220V(50/60)Hz
AC110V(50/60)Hz
AC24V(50/60)Hz
DC24V
15:1/2"
20:3/4"
25:1"
NASS DIN COIL
Ii2 G Ex e mb IIC T4 Gb
PKS-15~25
PKS-15
PKS-20
PKS-25
3/4"
1/2"
1"
4.0
6.0
12
17mm
17mm
22mm
-5°C ~ +70°C
-5°C ~ +70°C
-5°C ~ +70°C
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
0.5~10
82
82
100
155
157
172
62
62
62
1.55
1.61
2.36
NC
64www.unid.com.tw
SOLENOID VALVE
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
• piston guiding
•
• Water proof level :
• Recommend to apply to frequent operation
• Applied fluid type
PKS series is multiplex, , conductive, and normally closed (NC) 2/2 way solenoid valve.
Explosion proof level: EX II2 G Ex e mb IIC T4 Gb
IP 67
: water, air, light oil
PRODUCT DESCRIPTION
•
• impurity
• To extend the lifetime,
• Fluid
•
•
•
2
Minimum pressure to open: over 0.5kgf-cm
Before pipelining, the pipe line must be very clean without any contaminants or .
Y-line filter should be installed in the front end of solenoid valve.
temperature should be under 70℃
Ambient temperature should be under 60℃
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Crystallized fluid, Ex: sea water
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyPlug
VITON PTFE
Piston plugPiston Spring Piston
Forged
Brass
Coil Tube Spring
NASS ex-proof
DIN COIL
Stainless
steel
PARTS
MATERIAL
Core
Stainless
steel
Stainless
steel
Stainless
steel
Stainless
steel
Weight
(kg)
Dimension (mm)
L H DWater Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
SPECIFICATION
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
ExplosionProofSeries
66. PKW AC110- - - --10
□ : Standard (water, air)
G : Gas
LO : Light oil
VA : Vacuum
AC220V(50/60)Hz
AC110V(50/60)Hz
AC24V(50/60)Hz
DC24V
15:1/2"
20:3/4"
25:1"
10:3/8"
L
H
D
PKW-10~25
PKW-10
PKW-15
PKW-20
PKW-25
1/2"
3/8"
3/4"
1"
2.4
4.5
8.6
12
15mm
15mm
20mm
25mm
-5°C ~ +70°C
-5°C ~ +70°C
-5°C ~ +70°C
-5°C ~ +70°C
0~5
0~5
0~5
0~5
0~7
0~7
0~7
0~7
0~5
0~5
0~5
0~5
-3
0~10
-3
0~10
-3
0~10
-3
0~10
70
70
73
100
133
133
140
147
62
62
62
62
1.05
1.04
1.16
1.76
NC
65 www.unid.com.tw
SOLENOID VALVE
NASS DIN COIL
Ii2 G Ex e mb IIC T4 Gb
MODEL
Coil
Operating
Fluid
Voltage
ThreadPipe
Size
BSP
NPT
:
:
:
Standard (BSPT or PT)
BSPP or PF
NPT
MATERIAL:
•
•
• Water proof level :
• Able to operate under the low pressure
• Applied fluid type
• seal plug
PKW series is direct, multiplex, connected diaphragm, conductive, and normally closed (NC) 2/2
way solenoid valve.
Explosion proof Level: EX II2 G Ex e mb IIC T4 Gb
IP 67
: water, air, light oil, gas, vacuum
Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for
and diaphragm
PRODUCT DESCRIPTION
• impurity
• To extend the lifetime,
• Fluid
•
•
•
Before pipelining, the pipe line must be very clean without any contaminants or .
Y-line filter should be installed in the front end of solenoid valve.
temperature should be under 70℃
Ambient temperature should be under 60℃
AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
It should be installed horizontally; vertical installation is not advisable.
CAUTIONS:
• Corrosive fluid
• Crystallized fluid, Ex: sea water
• Viscosity over 20cst
• Liquid status when it is in high temperature; solid status when it is in low temperature.
Not Suitalbe For Fluid As Below:
Valve bodyCoil Tube Spring Core Plug Diaphragm
Forged
Brass
NASS ex-proof
DIN COIL
Stainless
steel
Stainless
steel
Stainless
steel
NBR
PARTS
MATERIAL NBR
SPECIFICATION
Weight
(kg)
Dimension (mm)
L H D
Vacuum
(Torr)
Water Air Steam Light oil Gas
MODEL
NASS
DIN Coil
(IP65)
CV ORIFICE
FLUID TEMP.
o
( C)
2
Operating Pressure kgf / cm (bar)
PIPE
SIZE
Waterproof
DIN/flying
lead Coil
ExplosionProofSeries