Many car owners are confused about gps tracker installation, so they will choose portable gps tracker, actually, wired gps tracker is also easy to install, just connect the correct wires.

1. How to install a wired gps tracker in your car
It’s more and more popular to install gps trackers into vehicels for remotely monitoring. But many
car owners get headaches from gps tracker installation. Now we will give details about wired gps
tracker installation. Take this gps tracker WT06N as a sample.
Model: WT06N
Installation Difficulty Index: ★★★★★
Connection Type: Four Wires
Dimension:98(L)*52(W)*15(H)mm
Weight: 96g
Box Dimension:147(L)*85(W)*63(H)mm
Shipping Weight:410g
Standard Packing: Main unit,Power cable,Relay,MIC,SOS button,User manual
Functions: Real-time Tracking, User define Geo-fence, Trace Playback, Overspeed Alarm
SOS Button, Remotely Voice Monitoring, Remotely Cut off Petrol/Electricity, Power-off alarm
&Low battery alarm, Vibration Alarm, Built-in battery
Tracking Platform: www.gpsoo.net/index_en.shtml
Android and IOS APP: goome gps(CarOnline)

2. Before the installation, please insert into a sim card in the device. Make sure that the sim card
has notification function and flow(gps tracker need monthly flow about 30M-100M).
As the picture shows, this wt06n has four wires. you should connect these wires to your car. Red
wire should connect with the positive electrode, black wire should connect with the negtive
electrode. The yellow wire connect with another yellow wire of relay. If you need engine stop
function, cut-off the oil pump lines and connect the green wires to the pump. (If you still feel
hard to install, please find your locar car repairshop for help. )

3. The device should be powered 24 hours, so we have to find stable and reliable current source. As
thepicture shows, open the fuse box, the negative black wire connects to the screw because
metal casesin a car are all negative. The positive red wire connects to the back of the fuse that
still has 12V voltage when key is took off (can be tested by multi-meter).

4. Where is the gps tracker installed?
Put the device face up; the device should be placed horizontally. There should not be metal
covered thedevice (metal rupture discs will affect signal reception. Please refer to instructions
below.

6. After the installation, you should drive your car in the open area and park it outside the
door. You have better keep it powered on over 2 hours. After finishing the procedures
mentioned above, you can contact our customer service staff to put your account of the
car online platform into operation and carry on position test.