Snow Chain-Integrated Tire for a Safe Drive on Winter Roads
Nexans Euromold 180AR High Voltage Oil Insulated Bushing
1. CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
180AR-1 /-2 /-3
INTERFACE A
EQUIPMENT BUSHING
Application
For use in equipment insulated
with oil fluid, typically for
transformers, switch gear,
capacitors...
Up to 24 kV - 250 A
Specifications and
standards
The plug-in type equipment
bushings 180AR-X meet the
requirements of CENELEC EN
50180 and IEC 137.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
Technical characteristics
Each bushing is tested for
AC withstand and partial
discharge prior to leaving the
factory.
Design
• The equipment bushing is a
moulded epoxy insulated part
in accordance with CENELEC
EN 50180.
The 180AR-2 bushing has a
length B outside this standard.
• The standard bushings,
(K)180AR-1 /-2 /-3, are
equipped with 6 tabs for the
bail restraint.
• The (K)180AR-1-G and
(K)180AR-3-G are equipped
with 4 tabs and 2 threaded
inserts M6x1 (-G version).
28
8
A
B
Minimum oil level:
- 12 kV: 40 mm
- 24 kV: 50 mm
Ordering instructions
To order the equipment
bushing, specify the type.
The bushings are supplied
with an earth lead (/J) or an
earth plate (/GS). This earth
connection must be specified
when ordering.
19
M10
Dia. 75
Dia. 80
In mm.
Equipment
bushing
type
Voltage
Ur
(kV)
Current
Ir
(A)
A
B
180AR-1
K180AR-1
180AR-2
K180AR-2
180AR-3
K180AR-3
12
24
12
24
12
24
250
250
250
250
250
250
222
222
284
284
171
171
106
106
168
168
55
55
Dimensions (mm)
14