Izumi REC-50 Battery Operated Cutters up to 50mm Cuts Aluminium & Copper Cables up to 50mm Diameter Izumi REC-50 Battery Operated Cutters Izumi REC-50 Battery Operated Cutters Specification Izumi REC-50 Battery Operated Cutters 14.4V DC Motor Drive Unit Size 105 (L) x 375 (H) x 115 (W) mm Weight 2.0kg (less battery) Izumi REC-50 Cutting Capacity (No of cuts with BP-70E/BP-250R1) Polyethylene cable 600V-CV325mm2 (31mm OD) 95/180 cuts 600V-CV 150mm2 x 3 (46mm OD) 50/90 cuts 600V-CV 500mm2 x 3 (38mm OD) 40/75 cuts 6KV-CVT 500mm2 (45mm OD) 30/60 cuts Multi-core vinyl insulation cable VVR 150mm2 (47mm OD) 3 core 50/90 cuts Soft copper cable 500mm2 (35mm OD) 50/90 cuts Hard copper cable 150mm2 (21mm OD) 160/300 cuts Izumi REC-50 was specifically designed for cutting the toughest copper and aluminium cables in a limited amount of space. Cuts are clean with a minimal amount of cable distortion.The Izumi REC-50 tool fits comfortably into a gloved hand. Repetitive ratcheting movement is entirely eliminated. Just a squeeze of the rocker trigger is all it takes to cut your toughest copper cable. Izumi REC-50 is a heavy duty cable cutter for non-ferrous cables up to 50 mm O.D.. A powerful gear reduction motor pulls a moveable blade through the toughest copper cable - equipped with a circuit breaker for overloading protection. Izumi REC-50 Battery Operated Cutters up to 50mm Izumi Cutting Tools : Izumi manufacture a range of hydraulic and battery operated cutters that are lightweight and portable requiring no set-up time. Izumi overhead line and cable cutters cut with amazing speed and are ideal in close quarters work such as manholes, cable joint trenches, underwater and in all environments where acetylene cable and overhead line conductor cutters cannot be used. Izumi cutting and crimping tools are approved by UK DNO's including Scottish Power, Northern Power Grid, Western Power Distribution, Electricity North West (ENW), UK Power Networks, Northern Ireland Electricity (NIE) and Scottish & Southern Energy for use by overhead linesmen and cable jointers for cutting and crimping cables and conductors. Izumi hydraulic and battery cable cutters and crimpers include tooling ranges for overhead line conductor applications - this includes cutting and crimping tools for ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines. Izumi cutting and crimping tools are available to suit all UK and most overseas conductors (copper and aluminium) including horse, keziah, lynx, lion, hen, upas, zebra, totara, collybia, rubus, sorbus, araucaria and redwood.