1. Apparel Production
Planning and Control
Assignment I
Garment Analysis
By:
Shubham Tilara #21
Silky Prajapati #23
BFT 6
2. I. Flat Sketch
Collar
Collar Band
Sleeve
Yoke
Pocket Lip
Pocket Extension
Pocket
Front Center Panel
Button
Front left Panel
Belt Loop
Tiers
Yoke
Waistband
3. II. Components
1 Collar
1 Collar Band
1 Back Yoke
2 Front Yokes (Right and Left)
3 Back Panels
2 Front Panel (Right)
2 Front Panels (Left)
2 Pockets
2 Pocket Lips
2 Pocket Extensions
2 Sleeves
1 Waist Band
4 Belt Loops
2 Panels For Tier Attachment
3 Panels For Gathered Tiers
III. Trims and Fabrics
6 Metal Buttons
4. IV. Machines
Single needle chain stitch
Double needle chain stitch
Overlock 514
Overlock 508
Button Holing
Button Attaching
5. V. Process Flow Chart (with inspection points)
Sl. Process
No.
1. Cutting of components
2. Sent to sewing machines
3. Collar making
4. Collar band making
5. Attaching collar to collar band
6. Attaching back components together
7. Attaching back yoke to back
8. Placket Making of front
9. Attaching front components together
10. Pocket panels attached to pockets
11. Buttons attached to pockets
12. Pockets attached to fronts
13. Pocket lips attached above the pockets
14. Fronts inspected
15. Attaching front yokes (l & r) to fronts (l & r)
16. Joining front and back yokes at shoulder
17. Attaching elastic to sleeve end leaving 1 inch
18. Joining sleeves to armholes
19. Joining side seams along with the sleeves
20. Attaching waist band to the bottom girth
21. Waist band girth inspected
22. Joining panel A to gathered layer 1 on top
23. Attaching it to bottom girth
24. Joining panel B to gathered layer 2 on top
25. Attaching it to the bottom of panel 1
26. Attaching gathered layer 3 to bottom of panel 2
27. Attaching belt loops
28. Inspecting for straight loops
29. For pressing
30. Pressing
31. Back to line for button attaching
6. 32. Button Holing on right placket
33. Button Attaching at left placket
34. Sent for final inspection
35. Trimming of threads
36. Final Inspection