This is the Highly Detailed factory service repair manual for the1999 NISSAN QUEST, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1999 NISSAN QUEST Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly. Service Repair Manual Covers: * General Information * Maintenance * Engine Mechanical * Engine Lubrication & Cooling Systems * Engine Control System * Accelerator Control, Fuel & Exhaust Systems * Automatic Transaxle * Front & Rear Axle * Front & Rear Suspension * Brake System * Steering System * Restraint System * Body & Trim * Heater & Air Conditioner * Starting & Charging System * Electrical System * Alphabetical Index File Format: PDF Compatible: All Versions of Windows & Mac Language: English Requirements: Adobe PDF Reader NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1999 NISSAN QUEST Service Repair Workshop Manual. Looking for some other Service Repair Manual,please check: https://www.aservicemanualpdf.com/ Thanks for visiting!

1. 3

2. 4

3. 1779

4. Attachment No.7
TID CID
CATALYST Three way catalyst function P0420 01H 01H Max. 1/128
P0440 05H 03H Max. 1/128mm2
P1440 05H 03H Max. 1/128mm2
EVAP control system purge flow monitoring P1447 06H 83H Min. 20mV
P0133 09H 04H Max. 16ms
P0131 0AH 84H Min. 10mV
P0130 0BH 04H Max. 10mV
P0132 0CH 04H Max. 10mV
P0134 0DH 04H Max. 1s
P0139 19H 86H Min. 10mV/500ms
P0137 1AH 86H Min. 10mV
P0140 1BH 06H Max. 10mV
P0138 1CH 06H Max. 10mV
P0135 29H 08H Max. 20mV
P0135 2AH 88H Min. 20mV
P0141 2DH 0AH Max. 20mV
P0141 2EH 8AH Min. 20mV
P0400 31H 8CH Min. 1
P0400 32H 8CH Min. 1
P0400 33H 8CH Min. 1
P0400 34H 8CH Min. 1
P1402 35H 0CH Max. 1
P0402 36H 0CH Max. 1count
P0402 37H 8CH Min. 1count
TEST VALUE AND TEST LIMIT (GST ONLY — NOT APPLICABLE TO CONSULT-II)
The following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is “OK” or “NG” while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be dis-
played on the GST screen.
Test limit Conversion
EVAP SYSTEM
EVAP control system (Small leak)
SRT item Self-diagnostic test item DTC
Test value
(GST display)
EGR SYSTEM
EGR function
EGRC-BPT valve function
HO2S
Heated oxygen sensor 1
Heated oxygen sensor 2
HO2S HTR
Heated oxygen sensor 1 heater
Heated oxygen sensor 2 heater

5. 5

6. 7

7. 8

8. 9

9. 10

10. 11

11. 12

12. 13

13. 14

14. 15

15. 16

16. 17

17. 18

18. 19

19. 20

20. 21

21. 22

22. 23

23. 24

24. 25

25. 26

26. 27

27. 28

28. 29

29. 30

30. 31

31. 32

32. 33

33. 34

34. 35

35. 36

36. 37

37. 38

38. 39

39. 40

40. 41

41. 42

42. 43

43. 44

44. 45

45. 46

46. 47

47. 48

48. 49

49. 50

50. 51

51. 52

52. 53

53. Thank you very much
for your reading.
Please Click Here
Then Get More
Information.