This tape is a self amalgamating, low voltage rubber tape which meets the requirements of ASTM-D4388, Type I. It easily conforms to irregular shapes and sufaces yielding a void free, electrically stable build up. Compatible with all extruded dielectric cable insulation.

1. Rubber Fusing Tape
1.Self Adhesive Rubber Fusing Tape
Description:
This tape is a self amalgamating, rubber tape which meets the requirements of ASTM-D-4388,
Type I. It easily conforms to irregular shapes and surfaces yielding a void free, electrically
stable build up. Compatible with all extruded dielectric cable insulation.
Specification: J-20
Property Value Unit Test Method
Total thickness 0.76 mm ASTM-D-4325
tensile strength 250 psi ASTM-D-4325
Elongation at break 400 % ASTM-D-4325
Dielectric Strength 11 KV/mm ASTM-D-4325
Date in table represent average test results are not be used for specification purposes.
Recommended Uses:
For insulating of splices on solid dielectric cable from 2KV to 10KV in conjunction with a jacket
tape.
Standard Sizes:
thickness width length
0.5mm 19mm 9m
0.76mm 19mm 9m
0.76mm 25mm 9m
0.76mm 38mm 9m
other size and cores are available customization