This document contains operating instructions and warranty information for an Omega watch. It provides details on proper watch care, environmental protection practices for battery disposal, the international 2-year warranty which covers material and manufacturing defects, and exclusions from the warranty such as normal wear and tear, damage from misuse, non-authorized repairs, and consequential damages. The warranty is valid when presented with a valid warranty certificate from an authorized Omega dealer.
DAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Manualjkmjskem
This is the Highly Detailed factory service repair manual for theDAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Publication number: 023-00045AE
Serial Number: 1001 and Up
Service Repair Shop Manual Covers:
Safety
Specifications
General Maintenance
Upper Structure
Lower Structure and Chassis
Engine and Drive Train
Hydraulics
Electrical System
Attachments
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
DAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Manualjkmjskem
This is the Highly Detailed factory service repair manual for theDAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Publication number: 023-00045AE
Serial Number: 1001 and Up
Service Repair Shop Manual Covers:
Safety
Specifications
General Maintenance
Upper Structure
Lower Structure and Chassis
Engine and Drive Train
Hydraulics
Electrical System
Attachments
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDAEWOO DOOSAN SOLAR 55-V PLUS EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
From Stress to Success How Oakland's Corporate Wellness Programs are Cultivat...Kitchen on Fire
Discover how Oakland's innovative corporate wellness initiatives are transforming workplace culture, nurturing the well-being of employees, and fostering a thriving environment. From comprehensive mental health support to flexible work arrangements and holistic wellness workshops, these programs are empowering individuals to navigate stress effectively, leading to increased productivity, satisfaction, and overall success.
Have you ever wondered about the lost city of Atlantis and its profound connection to our modern world? Ruth Elisabeth Hancock’s podcast, “Visions of Atlantis,” delves deep into this intriguing topic in a captivating conversation with Michael Le Flem, author of the enlightening book titled “Visions of Atlantis.” This podcast episode offers a thought-provoking blend of historical inquiry, esoteric wisdom, and contemporary reflections. Let’s embark on a journey of discovery as we unpack the mysteries of ancient civilizations and their relevance to our present existence.
La transidentité, un sujet qui fractionne les FrançaisIpsos France
Ipsos, l’une des principales sociétés mondiales d’études de marché dévoile les résultats de son étude Ipsos Global Advisor “Pride 2024”. De ses débuts aux Etats-Unis et désormais dans de très nombreux pays, le mois de juin est traditionnellement consacré aux « Marches des Fiertés » et à des événements festifs autour du concept de Pride. A cette occasion, Ipsos a réalisé une enquête dans vingt-six pays dressant plusieurs constats. Les clivages des opinions entre générations s’accentuent tandis que le soutien à des mesures sociétales et d’inclusion en faveur des LGBT+ notamment transgenres continue de s’effriter.
Is your favorite ring slipping and sliding on your finger? You're not alone. Must Read this Guide on What To Do If Your Ring Is Too Big as shared by the experts of Andrews Jewelers.
MRS PUNE 2024 - WINNER AMRUTHAA UTTAM JAGDHANEDK PAGEANT
Amruthaa Uttam Jagdhane, a stunning woman from Pune, has won the esteemed title of Mrs. India 2024, which is given out by the Dk Exhibition. Her journey to this prestigious accomplishment is a confirmation of her faithful assurance, extraordinary gifts, and profound commitment to enabling women.
Johnny Depp Long Hair: A Signature Look Through the Yearsgreendigital
Johnny Depp, synonymous with eclectic roles and unparalleled acting prowess. has also been a significant figure in fashion and style. Johnny Depp long hair is a distinctive trademark among the various elements that define his unique persona. This article delves into the evolution, impact. and cultural significance of Johnny Depp long hair. exploring how it has contributed to his iconic status.
Follow us on: Pinterest
Introduction
Johnny Depp is an actor known for his chameleon-like ability to transform into a wide range of characters. from the eccentric Captain Jack Sparrow in "Pirates of the Caribbean" to the introspective Edward Scissorhands. His long hair is one constant throughout his evolving roles and public appearances. Johnny Depp long hair is not a style choice but a significant aspect of his identity. contributing to his allure and mystique. This article explores the journey and significance of Johnny Depp long hair. highlighting how it has become integral to his brand.
The Early Years: A Budding Star with Signature Locks
1980s: The Rise of a Young Heartthrob
Johnny Depp's journey in Hollywood began in the 1980s. with his breakout role in the television series "21 Jump Street." During this time, his hair was short, but it was already clear that Depp had a penchant for unique and edgy styles. By the decade's end, Depp started experimenting with longer hair. setting the stage for a lifelong signature.
1990s: From Heartthrob to Icon
The 1990s were transformative for Johnny Depp his career and personal style. Films like "Edward Scissorhands" (1990) and "Benny & Joon" (1993) saw Depp sporting various hair lengths and styles. But, his long, unkempt hair in "What's Eating Gilbert Grape" (1993) began to draw significant attention. This period marked the beginning of Johnny Depp long hair. which became a defining feature of his image.
The Iconic Roles: Hair as a Character Element
Edward Scissorhands (1990)
In "Edward Scissorhands," Johnny Depp's character had a wild and mane that complemented his ethereal and misunderstood persona. This role showcased how long hair Johnny Depp could enhance a character's depth and mystery.
Captain Jack Sparrow: The Pirate with Flowing Locks
One of Johnny Depp's iconic roles is Captain Jack Sparrow from the "Pirates of the Caribbean" series. Sparrow's long, dreadlocked hair symbolised his rebellious and unpredictable nature. The character's look, complete with beads and trinkets woven into his hair. was a collaboration between Depp and the film's costume designers. This style became iconic and influenced fashion trends and Halloween costumes worldwide.
Other Memorable Characters
Depp's long hair has also been featured in other roles, such as Ichabod Crane in "Sleepy Hollow" (1999). and Roux in "Chocolat" (2000). In these films, his hair added a layer of authenticity and depth to his characters. proving that Johnny Depp with long hair is more than a style—it's a storytelling tool.
Off-Screen Influenc
Care Instructions for Activewear & Swim Suits.pdfsundazesurf80
SunDaze Surf offers top swimwear tips: choose high-quality, UV-protective fabrics to shield your skin. Opt for secure fits that withstand waves and active movement. Bright colors enhance visibility, while adjustable straps ensure comfort. Prioritize styles with good support, like racerbacks or underwire tops, for active beach days. Always rinse swimwear after use to maintain fabric integrity.
4. 2
INTRODUCTION
Special recommendations
What must I do to ensure that my OMEGA watch provides me with excel-
lent service for many years?
Magnetic fields: avoid placing your watch on loudspeakers or refrigera-
tors since they generate powerful magnetic fields which may damage it.
Swimming in the sea: always rinse your watch with fresh water after-
wards.
Shocks: whether they are thermal or other, avoid them.
Crown: push back the crown to its neutral position to prevent water from
penetrating into the mechanism.
Cleaning: for metal bracelets, rubber straps and water-resistant cases,
use a toothbrush and soapy water for cleaning and dry with a soft cloth.
Chemical products: avoid direct contact with solvents, detergents, per-
fumes, cosmetics, etc., since they may damage the bracelet, case or
gaskets.
Temperature: avoid exposing your watch to extreme temperatures
(greater than 60°C or 140°F and less than 0°C or 32°F) or extreme tem-
perature changes.
Water-resistance: a watch's absolute water-resistance cannot be per-
manently guaranteed. It may notably be affected by the ageing of gas-
kets or by an accidental shock to the crown. As stipulated in our service
instructions, we recommend you have the water resistance of your watch
checked once a year by an authorised OMEGA Service Centre.
Chronograph pushers: do not operate chronograph pushers under water
in order to prevent water entering the mechanism.
5. 3
English
What are the service intervals?
Like any precision instrument, a watch needs regular servicing to ensure
that it functions perfectly. We cannot indicate the frequency of such
work, since it depends entirely on the model, the climate and the owner's
individual care of the watch. As a general rule, a watch should be ser-
viced every 4 to 5 years, depending on the conditions in which it is used.
Who should I contact for a maintenance service or battery replace-
ment?
We recommend that you contact an approved OMEGA service centre or
authorised OMEGA retailer. They are equipped with the tools and ap-
paratus required to carry out the work and the necessary checks in a pro-
fessional manner. Furthermore, these specialists can guarantee that their
work is carried out in accordance with OMEGA's strict quality standards.
A worn-out battery should be replaced as quickly as possible in order
to avoid the risk of leakage and consequent damage to the movement.
The type of battery is defined on the guarantee card enclosed with your
watch.
Environmental protection
Collection and treatment of end of life Quartz watches*. This
symbol indicates that this product must not be disposed of with
household waste. It has to be returned to an authorised collection
point. By following this procedure, you will contribute to the protection of
the environment and human health. The recycling of the materials will
help to conserve natural resources.
* Valid in EU member states and in any countries with corresponding leg-
islation.
6. 4
OMEGA international warranty (valid for U.S.A. only)
Introduction
Your OMEGA®
watch is warranted by OMEGA SA* for a period of
twenty-four (24) months from the date of purchase under the terms and
conditions of this warranty. The international OMEGA warranty covers
material and manufacturing defects existing at the time of delivery of
the purchased OMEGA watch ("defects"). The warranty only comes into
force if the warranty certificate is dated, fully and correctly completed
and stamped by an official OMEGA dealer ** ("valid warranty certifi-
cate"). During the warranty period and by presenting the valid warranty
certificate, you will have the right to have any defect repaired free of
charge. In the event that repairs are unable to restore the normal condi-
tions of use of your OMEGA watch, OMEGA SA guarantees its repla-
cement by an OMEGA watch of identical or similar characteristics. The
warranty for the replacement watch ends twenty-four (24) months after
the date of purchase of the replaced watch.
This warranty does not cover:
• the life of the battery.
• normal wear and tear and ageing (for example scratched crystal;
alteration of the colour and/or material of non-metallic straps and
chains, such as leather, textile and rubber).
• any damage on any part of the watch resulting from abnormal/abu-
sive use, lack of care, negligence, accidents (knocks, dents, crushing,
broken crystal, etc.), incorrect use of the watch and non-observance
of the operating instructions provided by OMEGA SA.
• the OMEGA watch handled by non-authorised persons (for example
for battery replacement, service or repair) or which has been altered
in its original condition beyond OMEGA's control.
7. 5
English
ALL APPLICABLE IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND OF FITNESS FOR A PAR-
TICULAR PURPOSE GIVEN TO YOU BY LAW ARE HEREBY LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY. UNDER NO CIR-
CUMSTANCES WILL OMEGA SA BE LIABLE FOR ANY INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY KIND.
Some states do not allow limitations on how long implied warranties last,
or exclusions or limitations of incidental or consequential damages, so
exclusions or limitations mentioned may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which
may vary from state to state.
OMEGA SA’s OBLIGATION IS STRICTLY LIMITED TO REPAIR OR REPLA-
CEMENT AS EXPRESSLY STATED IN THIS LIMITED WARRANTY. YOUR
OFFICIAL OMEGA DEALER CARRIES SOLE RESPONSIBILITY FOR ANY
OTHER GUARANTEES.
The OMEGA customer service ensures the perfect working order of your
OMEGA watch. If your watch needs maintenance, rely on an official
OMEGA dealer or an authorized OMEGA Service Center as set forth in
the enclosed list: they can guarantee service according to OMEGA SA’s
standards.
* OMEGA SA
Rue Stämpfli 96, CH-2500 Bienne 4
** OMEGA SA Specialist Dealer in EU countries
OMEGA®
and ®
are registered trademarks
8. 6
OMEGA international warranty
Introduction
Your OMEGA®
watch is warranted by OMEGA SA* for a period of
twenty-four (24) months from the date of purchase under the terms and
conditions of this warranty. The international OMEGA warranty covers
material and manufacturing defects existing at the time of delivery of
the purchased OMEGA watch ("defects"). The warranty only comes into
force if the warranty certificate is dated, fully and correctly completed
and stamped by an official OMEGA dealer ** ("valid warranty certifi-
cate"). During the warranty period and by presenting the valid warranty
certificate, you will have the right to have any defect repaired free of
charge. In the event that repairs are unable to restore the normal condi-
tions of use of your OMEGA watch, OMEGA SA guarantees its replace-
ment by an OMEGA watch of identical or similar characteristics. The
warranty for the replacement watch ends twenty-four (24) months after
the date of purchase of the replaced watch.
* OMEGA SA
Rue Stämpfli 96, CH-2500 Bienne 4
** OMEGA SA Specialist Dealer in EU countries
OMEGA®
and ®
are registered trademarks
9. 7
English
This warranty does not cover:
• the life of the battery.
• normal wear and tear and ageing (for example scratched crystal;
alteration of the colour and/or material of non-metallic straps and
chains, such as leather, textile and rubber).
• any damage on any part of the watch resulting from abnormal/abu-
sive use, lack of care, negligence, accidents (knocks, dents, crushing,
broken crystal, etc.), incorrect use of the watch and non-observance
of the operating instructions provided by OMEGA SA.
• any consequential or indirect damage resulting from the use, failure to
operate, defects or lack of precision of the OMEGA watch.
• the OMEGA watch handled by non-authorised persons (for example
for battery replacement, service or repair) or which has been altered
in its original condition beyond OMEGA's control.
Any other claims against OMEGA SA, for example for damages other
than those defined in this warranty, are expressly excluded, except for
mandatory statutory rights the purchaser may have against the manu-
facturer.
This manufacturer's warranty:
• is independent of any warranty that may be provided by the retailer
and for which the retailer carries sole responsibility.
• does not affect the purchaser's rights with respect to the retailer nor
any other mandatory statutory rights the purchaser may have against
the retailer.
The OMEGA SA customer service ensures the perfect maintenance of
your OMEGA watch. If your watch needs attention, use an official OME-
GA dealer or an authorised OMEGA Service Centre. They can guaran-
tee a service which corresponds to OMEGA SA's standards.
10. 8
DESCRIPTION AND USE
The information contained in this document is for stand-
ard use of this model .
For more information, consult the Internet site
(www.omegawatches.com/spacemaster-z33).
Watch components
Displays
am/pm display
(AM or PM)
When the 12h mode is
selected (page 12)
Function display
According to mode
selected
Flight log
Flight being recorded
(page 24)
Display
Hours and values
11. 9
English
Pushers and crown
Chrono/Timer
Start/stop
(page 22 and page 27)
Setting mode
Validation of the setting
and access to
the next setting
Alarm
On/Off (page 18)
Selection of the
functions
Access to the
setting mode
Modification of
the values
Return to
Normal mode
Press once
Press twice
Press and hold
Favourite functions
(page 11)
General
Press once = to light up and
clear the hands
(page 11)
Press twice = to record a flight
sequence
(page 24)
Chrono/Timer
Reset to initial value/
split/reset to zero.
(page 22 and page 27)
Flight log
Deletion of 1 or
all the flights (page 26)
Time 2
Return to local time
(Setting mode) (page 16)
or
12. 10
SPECIAL FUNCTIONS
First use
Before using the flight log for the first time, you must:
• choose the flight log operating mode, page 12;
• set the time (TIME 1), page 14;
• set the UTC time difference, page 17;
• set the calendar, page 20.
Display lighting
This function:
• clears the hands to improve the visibility of the display;
• increases the brightness of the display if the ambient lighting is not
sufficient.
Use
1
To clear the hands (at 3
o'clock or 9 o'clock) and
increase the brightness of the
display.
After 5 seconds the hands return to their position and the bright-
ness of the display returns to its previous setting.
13. 11
English
Favourite functions
This allows you to quickly access two favourite functions.
Use
1 Display the desired function.
2
Press for 3 seconds to record
the function.
3
Press to move between the
two favourite functions.
Energy saving mode
This allows you to save the battery by blocking the hands and deactivat-
ing the display.
Use
1
Simultaneously press for 5
seconds.
2
Press the crown to exit the
mode.
In the energy saving mode, the time, date and recorded flights are
not lost. However, all the measurements in progress (chronograph,
flight time and timer measurements) are stopped.
or
14. 12
FUNCTIONS AND SETTINGS
Synchronising hands and setting display modes (neutral
display)
This function allows you to:
• control and set the synchronization of the hands;
• set the time display mode (24h or 12h);
• set the day and month display mode
(day/month or month/day);
• select the flight log operating mode (page 24).
Display
1 Neutral mode (no display)
Setting
1
To start the synchronization
of the hands with the digital
display.
2
To move the hour hand.
In 1 hour intervals.
3
To validate the hours.
To access the set minutes
function.
or
15. 13
English
4
To move the minute hand.
In half-minute intervals.
5
To validate the minutes.
To access the set seconds
function.
6
To move the second hand.
In 1 second intervals in the
clockwise direction only.
7
To validate the synchroniza-
tion and access the set time
display mode.
8
To select the time display
mode.
9
To validate the setting and
access the set day/month
display mode.
10
To select the day/month or
month/day display mode.
11
To validate the setting and
access the select flight log
operating mode.
Go to next page.
16. 14
12
To select the flight log operat-
ing mode:
BLOCK UTC = "BLOCK TO BLOCK" with UTC time;
BLOCK LOCAL = "BLOCK TO BLOCK" with local time;
FLT UTC = "Flight time" with UTC time;
FLT LOCAL = "Flight time" with local time.
The flights are shown with the following indications: BO (BLOCK
to BLOCK time) and F0 (Flight time).
13
To validate the settings and
return to the neutral display.
Local time (TIME 1)
Displaying and setting the local time.
This setting is not possible when a flight sequence is being record-
ed ( ).
The TIME 2 and UTC settings are based on TIME 1. It is therefore
essential to carry out this setting first.
Display
1 To display the local time.or
17. 15
English
Setting
1 To access the setting mode.
2 To set the hours.
3
To validate the hours.
To access the set minutes
function.
4 To set the minutes.
5
To validate the minutes.
To access the set seconds
function.
6 To set the seconds.
7
To validate the settings.
You are asked if you want to
set the UTC time difference.
Displayed for 5 seconds.
8
You have 5 seconds to start the
procedure for setting the UTC
time difference (page 17).
9
If you have not started the
procedure within 5 seconds,
the Setting mode is exited and
the local time is displayed.
18. 16
Second time zone (TIME 2)
Displaying and setting the second time zone.
Display
1
To display the second time
zone.
Setting
1 To access the setting mode.
2
To set the time of the second
time zone.
In 30 minute intervals.
Return to the local time (TIME 1).
3
To validate the settings.
To display the time of the
second time zone.
or
19. 17
English
United Time Coordinated / time difference
Displaying the United Time Coordinated (UTC).
Display
1 To display the UTC.
Setting
The setting corresponds to the difference between the local time
and the UTC. The value may be negative if the UTC is behind the
local time.
This setting is not possible when a flight sequence is being record-
ed ( ).
1 To access the setting mode.
2
To set the difference between
the local time and the UTC.
In 30 minute intervals.
3
To validate the settings.
To display the UTC.
or
20. 18
Alarm
Displaying, activating and setting the alarm.
Display
1 To display the alarm time.
Activation
1
Press to switch the alarm ON
or OFF.
Activation = beep!
Setting
1 To access the setting mode.
2 To set the alarm hour.
3
To validate the hour.
To access the set minutes
function.
4 To set the minutes.
5
To validate the minutes.
To access the set days func-
tion.
or
21. 19
English
6 To select the days.
ALL/DAYS = every day of the week.
MO/FR = From Monday to Friday.
SA/SU = Saturday and Sunday only.
7
To validate the settings.
To switch on the alarm.
The alarm is automatically switched on when the setting mode is
exited.
22. 20
Calendar
Displaying and setting the day of the week and the date.
Refer to setting the display mode (month/day - day/month), page 12.
The 's perpetual calendar is programmed
up to 2199.
Display
1 To display the date.
Setting
This setting is not possible when a flight sequence is being record-
ed ( ).
The order of the steps of the following procedure may vary ac-
cording to your choice of date display: day/month or month/day,
page 12.
1 To access the setting mode.
2 To set the year.
3
To validate the year.
To access the set month func-
tion.
4 To set the month.
or
23. 21
English
5
To validate the month.
To access the set day func-
tion.
6 To set the day.
7
To validate the settings.
To display the day of the week
and the date.
Calendar week
Displaying the numbers of the day of the year (DAY) and of the week
(WK).
Display
1 To display the numbers.or
24. 22
Chronograph
Measuring short periods of time to within 1/100th of a second with a split
time function.
Display
1 To display the chronograph.
Use in manual mode
1 To start the chronograph.
2
To stop/restart the chrono-
graph (total time).
3
To reset to zero.
When the chronograph has
been stopped.
After 99 hours 59 minutes 59 seconds and 99 100ths of a second,
the time measurement is automatically stopped and reset to zero.
or
25. 23
English
Use with "SPLIT" time
1 To start the chronograph.
2
To display the "SPLIT" time.
The chronograph contin-
ues to operate.
3 To redisplay the elapsed time.
4
To stop/restart the chrono-
graph (total time).
5
To reset to zero.
When the chronograph has
been stopped.
26. 24
Flight log
The flight log allows you to record the sequences of a flight.
You can record up to ten flights (0 to 9). When you record the 11th
flight, the first flight is automatically erased.
General information
There are 2 modes for saving flights:
• the "BLOCK to BLOCK time" mode (B0, B1, etc.),
• the "Flight time" mode (F0, F1, etc.).
Refer to setting the recording mode, page 12.
Use
1
Quickly press 2 times to record
a flight sequence.
You do not have to display the function to record a flight se-
quence.
The watch records the time and date for each sequence.
BLOCK TO BLOCK
Flight time
27. 25
English
To consult the flight sequences
1 To display the function.
The display varies according to the mode and action carried out:
NO FLT = no flight recorded
2
To access the consultation
mode.
3 To display the sequences.
Flight sequences (block to block):
B0 OFF = time and date of start of taxiing from the first block
B0 TOF = time and date of take-off from the first block
B0 LAN = time and date of landing from the first block
B0 ON = time and date of end of taxiing from the first block
B0 b-b = duration of first flight (from BLOCK OFF to BLOCK
ON)
B0 FLT = duration of first flight (effective flight time)
B1 OFF = time and date of start of taxiing from the second
block, etc.
Flight sequences (flight time):
F0 TOF = time and date of take-off of the first flight
F0 LAN = time and date of landing of the first flight
F0 FLT = duration of first flight
F1 TOF = time and date of take-off of the second flight, etc.
4 To exit consultation mode.
or
28. 26
To delete a flight
1
To access the consultation
mode.
2 Select the flight.
3
Initiate the deletion of the
flight.
4
Confirm the deletion of the
flight.
5 To exit consultation mode.
To delete all the flights
1
To access the consultation
mode.
2
Press until the message "DEL
ALL" is displayed.
3
Confirm that all the flights are
to be deleted.
4 To exit consultation mode.
29. 27
English
TIMER
The TIMER function allows you to count down a pre-defined time period.
Countdown from 99h59m59s to 1s
Display
1 To display the TIMER.
Setting
1 To access the setting mode.
2 To set the hour.
3
To validate the hour.
To access the set minutes
function.
4 To set the minutes.
5
To validate the minutes.
To access the set seconds
function
6 To set the seconds.
7
To validate the settings.
To display the set value.
or
30. 28
Use
A special function allows you to adjust to the nearest minute (for
example for the start of a regatta).
1 To start the timer.
2 To stop/restart the timer.
3
To return to the nearest
minute, only while the timer is
counting down.
4
Last 5 seconds = short beeps
and flashing screen.
5
Time expired = long beeps
and flashing screen.
Beeps again after 1
minute.
6 To stop the beeping.
Continuous time measurement from the end of the set period.
7
To stop/restart the time meas-
urement.
8
To return to the pre-set
value, only when the timer is
stopped.
31. 29
English
GLOSSARY
UTC United Time Coordinated. This is the international ref-
erence time.
Flight log Each pilot is obliged to keep a record of each of his/
her flights.
Flight time Method of noting flight hours by taking 2 points into
consideration: start of flight and end of flight.
BLOCK to BLOCK Method of noting flight hours by taking 4 points into
consideration: start of taxiing, take-off, landing and
end of taxiing, in order to differentiate the effective
flight hours from the taxiing time.
BLOCK OFF Start of taxiing, OFF is used to mark the removal of
the wheel chocks.
BLOCK ON End of taxiing, ON is used to mark the positioning of
the wheel chocks.
TROUBLESHOOTING
It is impossible to set TIMER 1, UTC and CAL (NO SET displayed).
• A flight is being recorded ( ).
To stop the recording of a flight time, double press
several times until the icon disappears .
In synchronization mode, I cannot select another mode from the one
selected:
• A flight is being recorded ( ).
The hands move but the LEDS are not on or are very low:
• The face is equipped with a light detector and adapts the brightness
of the display to the ambient light.
The second hand makes 5-second jumps:
• The battery is at the end of its service life (the battery must be re-
placed by an authorised OMEGA dealer).
32. 30
PICTOGRAMS
a Quartz
m Thermocompensated movement
k Perpetual calendar
i Easy time zone change
j GMT
: Split-time counter
h End of battery life
o Sapphire glass
t Double anti-reflective treatment inside and outside
n Water-resistant to a depth of 30 m (3 bar)
7 WEEE (RoHS) quartz
ª Button-type lithium-manganese dioxide battery cell