William H. Willett is seeking an aerospace or engineering position where he can assist engineers on project work. He has a Bachelor of Science in Mechanical Engineering Technology and Aeronautics from Miami University with a GPA of 3.61/4.00. His experience includes quality control work for aerospace parts, materials testing for P&G packaging, and internships at GE Aviation and P&G researching jet engines and product development. He also has skills in CAD, finite element analysis, statistics, and programming languages.
Anyu Zhou is a mechanical engineering professional seeking new opportunities. She has a Master's degree in mechanical engineering from the University of Florida and a Bachelor's degree from Harbin Institute of Technology in China. Zhou has experience in areas such as CFD analysis, HVAC design, energy management, and thermal systems design. She completed internships at Shenyang Engine Design & Research Institute and academic projects at the University of Florida focusing on energy conservation, wind tunnel design, and CFD modeling. Zhou is fluent in English and Chinese and holds an EIT certification and LEED Green Associate license.
Sherif Esmail is an experienced Electrical and Instrument Engineer from Perth, Australia seeking new opportunities. He has over 10 years of experience working on gas production projects in Egypt for Rashid & Burullus Petroleum company/BG-Group, including both offshore and onshore installations. His experience includes project engineering, construction supervision, commissioning, and maintenance troubleshooting. He holds professional certifications in safety and electrical protection systems and a BSc in Electrical Power Engineering from Cairo University.
This document discusses the different levels of communication. It describes intrapersonal communication as communication within oneself, interpersonal communication as sharing information between people, and extrapersonal communication as communication between humans and non-humans that requires understanding between sender and receiver. Organizational communication occurs at different hierarchical levels within an organization for internal operational purposes or externally. Mass communication relies on mediators to transmit messages to a large impersonal audience. The document also outlines the downward, upward, lateral, and diagonal flows of communication within an organization.
Frank Lopez is a certified massage therapist and advanced practitioner with over 25 years of experience. He has extensive training in various massage modalities such as deep tissue, myofascial release, trigger point therapy, and sports massage. He teaches chair massage and provides corporate wellness services. His goals are to train spa staff, teach internationally, contribute to massage research, and dedicate hands-on work to volunteer efforts helping those in need.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Les Christmas cards peuvent être un bon moyen de réactiver votre réseau professionnel en cette période de fête, ne les négligez pas. Découvrez les origines de cette tradition au Royaume-Uni ainsi que nos conseils pour écrire vos cartes de voeux.
Este documento discute los valores éticos en la organización y representación del conocimiento. Identifica varios valores éticos clave, como la hospitalidad cultural, garantía cultural, fidelidad en la representación de la información, actualización cooperativa de registros, multilingüismo y responsabilidad social. Indica que la negación de estos valores puede generar problemas éticos como sesgos, imprecisiones y censura. El documento analiza trabajos teóricos previos para sistematizar estos valores y problemas éticos en el campo de la organización y representación del conocimiento.
The document is a resume for Daniel Jason, who has a M.S. in Mechanical Engineering and B.S. in Mechanical and Aerospace Engineering. He has over 10 years of experience as a Product Support Engineer and Maintenance Engineer working on aircraft components. His skills include fluid dynamics, heat transfer, CAD, CFD simulation, and project engineering. He is seeking a mid-level engineering position utilizing his education and experience.
Anyu Zhou is a mechanical engineering professional seeking new opportunities. She has a Master's degree in mechanical engineering from the University of Florida and a Bachelor's degree from Harbin Institute of Technology in China. Zhou has experience in areas such as CFD analysis, HVAC design, energy management, and thermal systems design. She completed internships at Shenyang Engine Design & Research Institute and academic projects at the University of Florida focusing on energy conservation, wind tunnel design, and CFD modeling. Zhou is fluent in English and Chinese and holds an EIT certification and LEED Green Associate license.
Sherif Esmail is an experienced Electrical and Instrument Engineer from Perth, Australia seeking new opportunities. He has over 10 years of experience working on gas production projects in Egypt for Rashid & Burullus Petroleum company/BG-Group, including both offshore and onshore installations. His experience includes project engineering, construction supervision, commissioning, and maintenance troubleshooting. He holds professional certifications in safety and electrical protection systems and a BSc in Electrical Power Engineering from Cairo University.
This document discusses the different levels of communication. It describes intrapersonal communication as communication within oneself, interpersonal communication as sharing information between people, and extrapersonal communication as communication between humans and non-humans that requires understanding between sender and receiver. Organizational communication occurs at different hierarchical levels within an organization for internal operational purposes or externally. Mass communication relies on mediators to transmit messages to a large impersonal audience. The document also outlines the downward, upward, lateral, and diagonal flows of communication within an organization.
Frank Lopez is a certified massage therapist and advanced practitioner with over 25 years of experience. He has extensive training in various massage modalities such as deep tissue, myofascial release, trigger point therapy, and sports massage. He teaches chair massage and provides corporate wellness services. His goals are to train spa staff, teach internationally, contribute to massage research, and dedicate hands-on work to volunteer efforts helping those in need.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Les Christmas cards peuvent être un bon moyen de réactiver votre réseau professionnel en cette période de fête, ne les négligez pas. Découvrez les origines de cette tradition au Royaume-Uni ainsi que nos conseils pour écrire vos cartes de voeux.
Este documento discute los valores éticos en la organización y representación del conocimiento. Identifica varios valores éticos clave, como la hospitalidad cultural, garantía cultural, fidelidad en la representación de la información, actualización cooperativa de registros, multilingüismo y responsabilidad social. Indica que la negación de estos valores puede generar problemas éticos como sesgos, imprecisiones y censura. El documento analiza trabajos teóricos previos para sistematizar estos valores y problemas éticos en el campo de la organización y representación del conocimiento.
The document is a resume for Daniel Jason, who has a M.S. in Mechanical Engineering and B.S. in Mechanical and Aerospace Engineering. He has over 10 years of experience as a Product Support Engineer and Maintenance Engineer working on aircraft components. His skills include fluid dynamics, heat transfer, CAD, CFD simulation, and project engineering. He is seeking a mid-level engineering position utilizing his education and experience.
The document is a resume for an aerospace engineer seeking a structural or aerodynamic engineering position. It summarizes the candidate's education including a Master's and Bachelor's degree in Aerospace Engineering. It also outlines relevant project experience including stress analysis and structural stability analysis internship work. It provides details on work history and special skills including experience with stress analysis, aircraft structural design, finite element analysis software, and CAD programs.
This document contains contact and background information for Mariah Newman, including her education, skills, work experience, and projects. She has a Bachelor of Applied Science in Mechanical Engineering from the University of British Columbia. Her relevant work experience includes internships at Intel and Suncor Energy in facilities engineering and maintenance roles. She is currently working on her capstone design project involving the design of a robotic climber.
This document contains the resume of Mylaram Puran Kumar, an aerospace engineer with over 7 years of experience. He has expertise in conceptual design, development, and re-engineering of defense, industrial, and aerospace systems. Some of his projects include working on the Pinaka Multi Barrel Rocket Launcher, Akash Army Launcher, and design support for Global 7000/8000 aircraft slat actuators. He is proficient in CAD tools like NX, SolidWorks, and AutoCAD. Currently he works at Belcan India Pvt Ltd providing design engineering services for programs involving electronic packaging and qualification testing documentation.
Amitava Choudhury is seeking a challenging position that utilizes his 9+ years of experience in marine/rig design and oil & gas industries. He has experience managing projects, design, repair, and maintenance. He holds a diploma in electrical & instrumentation and is pursuing further qualifications. His project management experience includes design, specifications, scheduling, meetings, material planning, and resolving issues. He has worked in India and Singapore as a design and commissioning engineer on various rig and ship projects, overseeing electrical systems, coordination, reporting, and guiding teams.
William Johnston is an aerospace engineering graduate from Purdue University with extensive technical experience interning at companies like Sikorsky Aircraft, Northrop Grumman, and Orbital Sciences Corporation. He currently works as a Project Lead Engineer at Wright Electric, where he is helping design the first commercial fully electric airplane. Johnston has strong programming skills, is a private pilot, and maintains a high GPA from Purdue.
Ahmed F. Mahdi is a mechanical engineer with over 9 years of experience in engineering design, thermal and fluid systems, and teaching engineering. He has a Ph.D. in Mechanical & Equipment Engineering and certifications in AutoCAD, Inventor, SolidWorks, and Revit. His experience includes engineering design, finite element analysis, computational fluid dynamics, hydraulic and pneumatic systems design, and aircraft maintenance. Currently he is seeking opportunities as a mechanical engineer where he can apply his skills.
Mark Peterson is a Lead Nuclear Engineer at PSEG Nuclear in Hancock's Bridge, NJ with over 9 years of experience in chemical engineering. He has a Bachelor of Science in Chemical Engineering from Rowan University with a 3.446 GPA. At PSEG Nuclear, he is responsible for various systems and has optimized maintenance strategies to reduce costs. Previously, he worked as an Engineer II at General Dynamics Electric Boat where he designed ion exchange and condenser systems for submarines. He has skills in thermal analysis, equipment failure analysis, economic analysis, documentation, and computer programs including AutoCAD, MatLab, Microsoft Office, and various engineering tools.
Rohit Polas is seeking a position that utilizes his engineering skills and knowledge in thermal engineering. He has a B.Tech in Mechanical Engineering from Veermata Jijabai Technological Institute and an M.Tech in Thermal Engineering from College of Engineering Pune with a CGPA of 8.5. He has 9 months of work experience in operations at Welspun Corp Ltd. His areas of expertise include heat transfer, refrigeration, air conditioning, turbo machinery, and fluid and thermal sciences. He has experience using software like ANSYS, AutoCAD, and CATIA.
Andrew Lane is an engineer with over 10 years of experience in mechanical engineering, thermal and fluid systems design, and project management. He has worked for General Dynamics Electric Boat designing thermal and fluid systems for nuclear submarines. As a project engineer at Pratt & Whitney, he coordinated work between mechanical systems groups. He has a Bachelor's degree in Mechanical Engineering from Loyola Marymount University and holds an active Department of Defense SECRET security clearance.
Hoa Ly is seeking an engineer position offering teamwork, challenges, and career growth. He has a Master's and Bachelor's in Aerospace Engineering from Wichita State University with a GPA of 3.8 and 3.33 respectively. His coursework includes mechanics, materials, structures, dynamics, and composites. Currently, he is a computational mechanics lab technician utilizing modeling software like Hypermesh and LS-Dyna. Previously, he held co-op roles in environmental health and a composites lab technician. His master's thesis developed a novel finite element for lap joint modeling.
This resume is for Eduarde P. Lopez, a Filipino male with over 28 years of experience in instrument and electrical engineering design and construction for oil, gas, and power projects. He holds a Bachelor's degree in Electrical Engineering and has worked on projects in Malaysia and the Philippines, holding various roles including instrument engineer, designer, and project management positions. His responsibilities have included design, construction supervision, vendor evaluation, and ensuring safety and quality standards.
J.Sathuragiri is a HVAC project engineer with over 5 years of experience in designing and implementing HVAC systems for marine vessels and buildings. He has a mechanical engineering degree and expertise with design tools like AutoCAD and Carrier E-20. Some of his project experience includes working on lift boats and support vessels in Vietnam as well as commercial buildings in Singapore and Oman.
Forrest G. Vaughn is an aerospace engineer seeking new opportunities. He has over 5 years of experience in structural design, finite element analysis, and project management for aerospace and power systems companies. His background includes work on spacecraft payload systems, gas turbine components, and unmanned aerial vehicles. Vaughn also has skills in 3D CAD modeling, simulation, and collaboration. He holds a Bachelor's degree in Aerospace Engineering from the University of Central Florida.
Matthew Taggart is a mechanical engineer seeking a position applying his skills. He has a Master's in Mechanical Engineering from Stevens Institute of Technology and a Bachelor's from Polytechnic Institute of NYU. His experience includes working as an energy intern analyzing clients' energy usage and recommending upgrades. He is proficient in SolidWorks, Creo, and MATLAB and has experience designing and fabricating a quadcopter for his senior project.
Kevin Brackett is a mechanical engineering student seeking an internship. He has a 3.87 GPA from the University of North Carolina at Charlotte where he studied mechanical engineering. His coursework included finite element analysis, advanced CAD/CAM, and plastic part design. For projects, he modified a dryer to meet Energy Star standards, led a team to design a remote-controlled vehicle, and created an engine capable of high rpm. He is proficient in Creo Parametric, Geomagic, LabView, and other engineering software. He has received academic awards including being named to the Chancellor's List and receiving scholarships.
Quan Ngo is a mechanical engineering student expected to graduate with a Master's degree in 2018 from California State University, Long Beach. He has a Bachelor's degree from University of California, Irvine and relevant coursework includes CAD, thermodynamics, fluid dynamics, heat transfer, CFD, and FEA. His experience includes working as a design engineer where he negotiated contracts and designed thermoforming tools. His projects include building aircraft for competitions where he performed design, manufacturing, analysis, and testing. He is proficient in Solidworks, ANSYS, programming languages, and equipment like 3D printers.
Eric Foreman is seeking a challenging position that allows him to advance his technical and leadership skills. He has over 15 years of experience at IBM developing timing methodologies for server designs. He led teams that created statistical timing methodologies for multiple technology nodes. Foreman has been recognized for his innovation through numerous IBM awards and holds 58 patents.
Gregory Hahn Jr. received a Bachelor of Science and Master of Science in Mechanical Engineering from Northern Arizona University. His master's thesis focused on modeling photovoltaic power for wildlife telemetry systems. He has work experience at W.L. Gore and Associates designing manufacturing aids and investigating product issues. As a graduate research assistant, he researched energy harvesting methods for sustaining battery life in marine bio-logging tags. Hahn has also held roles in general maintenance and welding/plumbing at NAU. He has published papers on solar power models for distributed marine sensors and an energy harvester. Hobbies include sports, fabrication projects, and vehicle maintenance.
Colin Roderick seeks a position as a mechanical or test engineer where he can apply his knowledge and experience developing and testing innovative products. He holds an MS in Mechanical Engineering from UMass Amherst and a BS in Engineering from Roger Williams University. His experience includes positions at DNV GL conducting energy assessments of wind farms, Northern Power Systems performing simulations and engineering of wind turbines, and GE Oil & Gas developing diagnostic testing capabilities for valves and products.
This document provides details on an aerospace engineer, pilot, and yachtsman with diverse international experience. He has worked in industries including aerospace, maritime, composites, design, training, and assessment. He has lived in Asia, the Middle East, South America, Europe, and Australia and is fluent in multiple languages. His qualifications include a Bachelor's in mechanical engineering, commercial pilot certifications, workplace assessment qualifications, and yachting certifications. He has experience in areas such as project engineering, reliability engineering, training, and composite work.
More Related Content
Similar to William Willet consolidated resume Dec 21 2016 GE
The document is a resume for an aerospace engineer seeking a structural or aerodynamic engineering position. It summarizes the candidate's education including a Master's and Bachelor's degree in Aerospace Engineering. It also outlines relevant project experience including stress analysis and structural stability analysis internship work. It provides details on work history and special skills including experience with stress analysis, aircraft structural design, finite element analysis software, and CAD programs.
This document contains contact and background information for Mariah Newman, including her education, skills, work experience, and projects. She has a Bachelor of Applied Science in Mechanical Engineering from the University of British Columbia. Her relevant work experience includes internships at Intel and Suncor Energy in facilities engineering and maintenance roles. She is currently working on her capstone design project involving the design of a robotic climber.
This document contains the resume of Mylaram Puran Kumar, an aerospace engineer with over 7 years of experience. He has expertise in conceptual design, development, and re-engineering of defense, industrial, and aerospace systems. Some of his projects include working on the Pinaka Multi Barrel Rocket Launcher, Akash Army Launcher, and design support for Global 7000/8000 aircraft slat actuators. He is proficient in CAD tools like NX, SolidWorks, and AutoCAD. Currently he works at Belcan India Pvt Ltd providing design engineering services for programs involving electronic packaging and qualification testing documentation.
Amitava Choudhury is seeking a challenging position that utilizes his 9+ years of experience in marine/rig design and oil & gas industries. He has experience managing projects, design, repair, and maintenance. He holds a diploma in electrical & instrumentation and is pursuing further qualifications. His project management experience includes design, specifications, scheduling, meetings, material planning, and resolving issues. He has worked in India and Singapore as a design and commissioning engineer on various rig and ship projects, overseeing electrical systems, coordination, reporting, and guiding teams.
William Johnston is an aerospace engineering graduate from Purdue University with extensive technical experience interning at companies like Sikorsky Aircraft, Northrop Grumman, and Orbital Sciences Corporation. He currently works as a Project Lead Engineer at Wright Electric, where he is helping design the first commercial fully electric airplane. Johnston has strong programming skills, is a private pilot, and maintains a high GPA from Purdue.
Ahmed F. Mahdi is a mechanical engineer with over 9 years of experience in engineering design, thermal and fluid systems, and teaching engineering. He has a Ph.D. in Mechanical & Equipment Engineering and certifications in AutoCAD, Inventor, SolidWorks, and Revit. His experience includes engineering design, finite element analysis, computational fluid dynamics, hydraulic and pneumatic systems design, and aircraft maintenance. Currently he is seeking opportunities as a mechanical engineer where he can apply his skills.
Mark Peterson is a Lead Nuclear Engineer at PSEG Nuclear in Hancock's Bridge, NJ with over 9 years of experience in chemical engineering. He has a Bachelor of Science in Chemical Engineering from Rowan University with a 3.446 GPA. At PSEG Nuclear, he is responsible for various systems and has optimized maintenance strategies to reduce costs. Previously, he worked as an Engineer II at General Dynamics Electric Boat where he designed ion exchange and condenser systems for submarines. He has skills in thermal analysis, equipment failure analysis, economic analysis, documentation, and computer programs including AutoCAD, MatLab, Microsoft Office, and various engineering tools.
Rohit Polas is seeking a position that utilizes his engineering skills and knowledge in thermal engineering. He has a B.Tech in Mechanical Engineering from Veermata Jijabai Technological Institute and an M.Tech in Thermal Engineering from College of Engineering Pune with a CGPA of 8.5. He has 9 months of work experience in operations at Welspun Corp Ltd. His areas of expertise include heat transfer, refrigeration, air conditioning, turbo machinery, and fluid and thermal sciences. He has experience using software like ANSYS, AutoCAD, and CATIA.
Andrew Lane is an engineer with over 10 years of experience in mechanical engineering, thermal and fluid systems design, and project management. He has worked for General Dynamics Electric Boat designing thermal and fluid systems for nuclear submarines. As a project engineer at Pratt & Whitney, he coordinated work between mechanical systems groups. He has a Bachelor's degree in Mechanical Engineering from Loyola Marymount University and holds an active Department of Defense SECRET security clearance.
Hoa Ly is seeking an engineer position offering teamwork, challenges, and career growth. He has a Master's and Bachelor's in Aerospace Engineering from Wichita State University with a GPA of 3.8 and 3.33 respectively. His coursework includes mechanics, materials, structures, dynamics, and composites. Currently, he is a computational mechanics lab technician utilizing modeling software like Hypermesh and LS-Dyna. Previously, he held co-op roles in environmental health and a composites lab technician. His master's thesis developed a novel finite element for lap joint modeling.
This resume is for Eduarde P. Lopez, a Filipino male with over 28 years of experience in instrument and electrical engineering design and construction for oil, gas, and power projects. He holds a Bachelor's degree in Electrical Engineering and has worked on projects in Malaysia and the Philippines, holding various roles including instrument engineer, designer, and project management positions. His responsibilities have included design, construction supervision, vendor evaluation, and ensuring safety and quality standards.
J.Sathuragiri is a HVAC project engineer with over 5 years of experience in designing and implementing HVAC systems for marine vessels and buildings. He has a mechanical engineering degree and expertise with design tools like AutoCAD and Carrier E-20. Some of his project experience includes working on lift boats and support vessels in Vietnam as well as commercial buildings in Singapore and Oman.
Forrest G. Vaughn is an aerospace engineer seeking new opportunities. He has over 5 years of experience in structural design, finite element analysis, and project management for aerospace and power systems companies. His background includes work on spacecraft payload systems, gas turbine components, and unmanned aerial vehicles. Vaughn also has skills in 3D CAD modeling, simulation, and collaboration. He holds a Bachelor's degree in Aerospace Engineering from the University of Central Florida.
Matthew Taggart is a mechanical engineer seeking a position applying his skills. He has a Master's in Mechanical Engineering from Stevens Institute of Technology and a Bachelor's from Polytechnic Institute of NYU. His experience includes working as an energy intern analyzing clients' energy usage and recommending upgrades. He is proficient in SolidWorks, Creo, and MATLAB and has experience designing and fabricating a quadcopter for his senior project.
Kevin Brackett is a mechanical engineering student seeking an internship. He has a 3.87 GPA from the University of North Carolina at Charlotte where he studied mechanical engineering. His coursework included finite element analysis, advanced CAD/CAM, and plastic part design. For projects, he modified a dryer to meet Energy Star standards, led a team to design a remote-controlled vehicle, and created an engine capable of high rpm. He is proficient in Creo Parametric, Geomagic, LabView, and other engineering software. He has received academic awards including being named to the Chancellor's List and receiving scholarships.
Quan Ngo is a mechanical engineering student expected to graduate with a Master's degree in 2018 from California State University, Long Beach. He has a Bachelor's degree from University of California, Irvine and relevant coursework includes CAD, thermodynamics, fluid dynamics, heat transfer, CFD, and FEA. His experience includes working as a design engineer where he negotiated contracts and designed thermoforming tools. His projects include building aircraft for competitions where he performed design, manufacturing, analysis, and testing. He is proficient in Solidworks, ANSYS, programming languages, and equipment like 3D printers.
Eric Foreman is seeking a challenging position that allows him to advance his technical and leadership skills. He has over 15 years of experience at IBM developing timing methodologies for server designs. He led teams that created statistical timing methodologies for multiple technology nodes. Foreman has been recognized for his innovation through numerous IBM awards and holds 58 patents.
Gregory Hahn Jr. received a Bachelor of Science and Master of Science in Mechanical Engineering from Northern Arizona University. His master's thesis focused on modeling photovoltaic power for wildlife telemetry systems. He has work experience at W.L. Gore and Associates designing manufacturing aids and investigating product issues. As a graduate research assistant, he researched energy harvesting methods for sustaining battery life in marine bio-logging tags. Hahn has also held roles in general maintenance and welding/plumbing at NAU. He has published papers on solar power models for distributed marine sensors and an energy harvester. Hobbies include sports, fabrication projects, and vehicle maintenance.
Colin Roderick seeks a position as a mechanical or test engineer where he can apply his knowledge and experience developing and testing innovative products. He holds an MS in Mechanical Engineering from UMass Amherst and a BS in Engineering from Roger Williams University. His experience includes positions at DNV GL conducting energy assessments of wind farms, Northern Power Systems performing simulations and engineering of wind turbines, and GE Oil & Gas developing diagnostic testing capabilities for valves and products.
This document provides details on an aerospace engineer, pilot, and yachtsman with diverse international experience. He has worked in industries including aerospace, maritime, composites, design, training, and assessment. He has lived in Asia, the Middle East, South America, Europe, and Australia and is fluent in multiple languages. His qualifications include a Bachelor's in mechanical engineering, commercial pilot certifications, workplace assessment qualifications, and yachting certifications. He has experience in areas such as project engineering, reliability engineering, training, and composite work.
Similar to William Willet consolidated resume Dec 21 2016 GE (20)
1. WILLIAM H. WILLET
OBJECTIVE Find an Aerospace/Engineering position where I can assist engineers on project work
EDUCATION Miami University,Oxford,OH
Bachelor of Science, Mechanical Engineering Technology 2006-2008
Bachelor of Science, Aeronautics w/focus in Quality Control 1996-2008
Cumulative GPA: 3.61/4.00 Major GPA: 3.87/4.00
Related Coursework
Physics I&II Quality Control Thermodynamics/Heat Transfer
Aerodynamics I&II Calculus I&II Fluid Mechanics I & II
Aircraft Design Circuit Analysis Engineering Materials I&II
CURRENT STUDIESP.E. Exam, PHP/MySQL,HTML & CSS, Javascript, Python, C, HTML5 Mobile App
Development with PhoneGap, iOS Development, jQuery, Introduction to Web Development
RELEVANT SKILL I have given presentations to Corporate executives and Engineers at Procter & Gamble,
General Electric Aviation, and others. In 2015 I worked a lot of technical trade shows as a
1099 employee; public speaking and presentations are a strength. I built a Wikipedia to help
keep track of the dozen+ projects I worked simultaneously as a contractor for P&G,to keep
engineers informed on progress. As a Marine then a student at Miami Oxford, I worked on jet
engines and schoolwork related to jet engines. I took/passed the Functional Engineer exam,
having graduated from an ABET-accredited MechanicalEngineering Tech course at Miami. I
am well-suited towards technical writing, operating independently for severalengineers at
once, and procuring/operating/maintaining test equipment with little supervision.
EXPERIENCE Data Recognition Corporation Sharonville, OH Mar 2009-Aug 2009
Grading Science essays/Ohio Graduation Exams Mar 2016-present
Brand Ambassador/Spokesperson-various cities Aug 2011-present
1099-work as a model, spokesman, brand ambassador
CTL Aerospace, West Chester,OH Quality control tech. Oct 2014-Dec 2014
Inspect incoming Aerospace parts to assess whether they can be repaired or need to
be replaced according to FAA guidelines
Perform some repairs according to FAA guidelines
Prestige Tech Svcs (for P&G Packaging),Beckett Ridge,OH Jan 2010-Aug 2013
Lab Technician M&S/MS&T
Research polymers using DMAs, Rheometers,Compression Molder, Instron,etc
Doubled Capacity by helping calibrate/put back into service TA instruments:
o DMA Q-800 & AR-2000 rheometer,RSA-G2 TRIOS software
Installed/retrofitted/validated environmental chamber for Instron 1122
Gave technical presentations at group M&S/MS&T meetings
General Electric-Aviation,Cincinnati, OH June 2008-Aug 2008
Summer Intern PDE (Composites)
Tolerance analysis of Metal Leading Edge/Composites GEnx fan blade
Analysis/flattening of plies for GEnx using Unigraphics add-on
Teamcenter/Sketching/Modeling training with Unigraphics/NX-5
Procter & Gamble, Cincinnati, OH
Spring Co-op in R&D (Swiffer Division)* Jan 2008-June 2008
Analyze effects of blade/anvil material for cutting Swiffer dusters
Evaluate effects of heat/cold on blade/anvil for cutting
Analyze effects of blade/anvil geometry, serrated blade, etc.
Summer Intern in R&D (Steam stripping) May 2007-Aug 2007
Researched alternative materials for steam stripping column @Lima
2. Developed IT tools for P&GWikipedia for Process R&D
OKI Systems & Frontgate Catalog,Cincinnati, OH Aug 1993-Mar 1999
Parts Team Leader/Returns Team Leader
Led parts team, researched parts using microfiche, led bi-yearly inventory
Answered inside sales calls, ran customer counter, processed returns
Built quotes for after-market sales,went on sales calls, trained employees
ComicQuest, Cincinnati, OH Owner/Operator Mar 1999-present
Maintain 100% positive feedback rating with over 10,000 transactions
Monitor inventory, procure stock, pursue maximum return on investment
Sort product, list auctions, maximize advertising dollar and ship items
MILITARY United States Marine Corps, MCAS ElToro, CA Dec 1984 – Feb 1987
Aviation Machinist Mate, MOS 6013-Aircraft Mechanic
Performed Jet Engine Maintenance on F-4 Phantom & A-6 Intruder
Honorable discharge upon release from active duty
CERTIFICATES CAD/CAM certificate Miami
Fundamentals of Engineering exam/Engineer In Training passed June 2009
PROJECT WORK Residential Elevator design/built/installation for fellowstudent
Research,design, build and installation of a brand new residential elevator
Procure funding/grant monies for the project; saved over $18K
Electrical troubleshooting of elevator once installed in Wisconsin
*Swiffer Duster cutting project for Procter & Gamble
Defined base model/cutting problem for Duster since its inception in 2003
Originated research to investigate cutting at smaller scale/microscopy
Designed tooling for HSRP cutting research & future research
Was able to reproduce duster welding problem within a few cuts on HSRP
Microscopy revealed back edge of knife was dulling/causing welding
Miami University projects
Worked on HVAC trainer for M.U. Hamilton, fluids trainer for M.U. Middletown
Member of Epsilon Pi Tau (Gamma Chapter), served as treasurer/Student Gov’t
Co-author of Aeronautics lab class taught at Miami Oxford (AER 253)
Teaching assistant/student aid for Aeronautics, Engineering Technology, etc.
Undergraduate Summer Scholars grant: 12 Credit hour NASA project using FEA
Performance Website:http://newdev.ham.muohio.edu/performance/about.htm
Undergraduate associate Engineering Tech Dept 2007-2008 (AutoCad, etc)
Awards & Scholarships
Dean’s list 12 awards
Student of the Month (10/2007)
David Young Engineering Award (ENT program’s highest award)
Miami University Alumni Scholarship winner
John E Cochenour Scholarship winner
Spoke at MUH 40th
Gala fundraiser: raised over $40K for Miami Scholarships
Undergraduate Summer Scholarship Miami University – Summer 2008
Bethany House Services 25th
year/10th
annual winetasting fundraiser (25K raised)
SKILLS
Finite Element Analysis/Abaqus/Ansys AutoCad/Unigraphics/Solid Edge/Solid Works
MS Office/Lotus Notes/DOS/VB.net Owner/Operator Ebay business (10K+ trans)
Aerodynamics/Aeronautics Jet propulsion/Fluid Mechanics
Thermodynamics/Heat Transfer Jet engine Mechanic/student pilot
SAS/Mini-tab statistical software (JMP) Matlab/Maple/MathCad matrix-solving software