WH-2060A-B01-ASD-418
•
1 like•89 views
This drawing provides details for a wooden kitchen including a frameless door made of laminated plywood with a white melamine face and matching cherry finish. The drawing includes an isometric and plan view of the door and notes its construction from 18mm plywood with a laminated surface on both sides.
Report
Share
Report
Share
Download to read offline
Recommended
WH-1330-B02-ASD-438
This drawing provides details for a wooden kitchen including door materials, box construction, frameless construction type, and matching finish of EGGER H 1692 ST15 Meran Cherry. The drawing was created by L. Sinno and J. Al-Khateeb of Consultant for the Wooden Kitchen project and Client.
WH-1070A-B01-ASD-431
This document contains notes for a kitchen shop drawing including details about the door, box construction, type of construction, and finish for item WH-1070a-B01-ASD-431. The door is specified as 2-sided laminated on 18mm plywood. The box construction is 18mm plywood with a white melamine face. It is a frameless type of construction with a matching EGGER H 1692 ST15 Meran Cherry finish.
Bataleur Farm House
The document contains a floor plan and elevations for a proposed farm house with labeled rooms including a kitchen, dining room, lounge, bedrooms, bathroom, pantry, and more. Dimensioned drawings include a floor plan at a scale of 1:100, front and rear elevations at 1:200, and two side elevations and two sections also at 1:100. Key details are provided such as natural ground level, finished floor level, and lintel heights. Information at the bottom includes total internal and external areas under roof.
Building permit 2
1. The document defines various building-related terms like building permit, erection, alteration, renovation, conversion, repair, moving, and demolition.
2. It lists exceptions to building permit requirements for minor constructions like sheds and outhouses under 6 sqm and additions like open terraces under 20 sqm.
3. It outlines the requirements to submit along with a building permit application like property documents and plans signed by licensed professionals showing architectural, structural, plumbing and electrical details.
Mill 14-1-15 - Sheet - A100 - CONTENTS PAGE
- The document provides general notes for a construction project to change the use of a protected structure built between 1850-1860 from a mill to a dance studio.
- Expert advice must be sought from conservation architects and heritage groups before starting construction. Existing building dimensions are from a site survey.
- Precast concrete, glulaminated beams and columns, fire doors and escape routes must comply with relevant building regulations and standards.
- Steel columns and beams will span gridlines from column to column and beam to beam.
KITCHEN_REV-DE (3)
This document contains architectural drawings and specifications for cabinetry in two elevations of a home belonging to the Freedman residence. Elevation D shows cabinets with two roll-out shelves and no doors but a finished interior. Elevation E shows cabinets with one shelf and an applied panel but no other details. The document notes that any changes from the contract drawings and specifications will result in additional charges and requires signatures of the owner or builder to acknowledge this.
KITCHEN_REV-C (3)
This document is a set of kitchen cabinet drawings and specifications for the Freedman residence. It includes dimensions for cabinets and appliances, notes about floating shelves, a trash pull-out, and a statement noting that any changes after review will incur additional charges which must be signed by the owner or builder. Revisions to the drawings were made between February 1st and 25th.
14041_A-22-071-P1
The document contains architectural drawings for a gym and room above a ballroom at the Millennium Hotel in Mayfair. There are 7 drawings at scales ranging from 1:5 to 1:50 showing floor plans, sections, and construction details. Acoustic insulation is noted as required between the gym/room and ballroom below.
Recommended
WH-1330-B02-ASD-438
This drawing provides details for a wooden kitchen including door materials, box construction, frameless construction type, and matching finish of EGGER H 1692 ST15 Meran Cherry. The drawing was created by L. Sinno and J. Al-Khateeb of Consultant for the Wooden Kitchen project and Client.
WH-1070A-B01-ASD-431
This document contains notes for a kitchen shop drawing including details about the door, box construction, type of construction, and finish for item WH-1070a-B01-ASD-431. The door is specified as 2-sided laminated on 18mm plywood. The box construction is 18mm plywood with a white melamine face. It is a frameless type of construction with a matching EGGER H 1692 ST15 Meran Cherry finish.
Bataleur Farm House
The document contains a floor plan and elevations for a proposed farm house with labeled rooms including a kitchen, dining room, lounge, bedrooms, bathroom, pantry, and more. Dimensioned drawings include a floor plan at a scale of 1:100, front and rear elevations at 1:200, and two side elevations and two sections also at 1:100. Key details are provided such as natural ground level, finished floor level, and lintel heights. Information at the bottom includes total internal and external areas under roof.
Building permit 2
1. The document defines various building-related terms like building permit, erection, alteration, renovation, conversion, repair, moving, and demolition.
2. It lists exceptions to building permit requirements for minor constructions like sheds and outhouses under 6 sqm and additions like open terraces under 20 sqm.
3. It outlines the requirements to submit along with a building permit application like property documents and plans signed by licensed professionals showing architectural, structural, plumbing and electrical details.
Mill 14-1-15 - Sheet - A100 - CONTENTS PAGE
- The document provides general notes for a construction project to change the use of a protected structure built between 1850-1860 from a mill to a dance studio.
- Expert advice must be sought from conservation architects and heritage groups before starting construction. Existing building dimensions are from a site survey.
- Precast concrete, glulaminated beams and columns, fire doors and escape routes must comply with relevant building regulations and standards.
- Steel columns and beams will span gridlines from column to column and beam to beam.
KITCHEN_REV-DE (3)
This document contains architectural drawings and specifications for cabinetry in two elevations of a home belonging to the Freedman residence. Elevation D shows cabinets with two roll-out shelves and no doors but a finished interior. Elevation E shows cabinets with one shelf and an applied panel but no other details. The document notes that any changes from the contract drawings and specifications will result in additional charges and requires signatures of the owner or builder to acknowledge this.
KITCHEN_REV-C (3)
This document is a set of kitchen cabinet drawings and specifications for the Freedman residence. It includes dimensions for cabinets and appliances, notes about floating shelves, a trash pull-out, and a statement noting that any changes after review will incur additional charges which must be signed by the owner or builder. Revisions to the drawings were made between February 1st and 25th.
14041_A-22-071-P1
The document contains architectural drawings for a gym and room above a ballroom at the Millennium Hotel in Mayfair. There are 7 drawings at scales ranging from 1:5 to 1:50 showing floor plans, sections, and construction details. Acoustic insulation is noted as required between the gym/room and ballroom below.
How to fix a damaged landscape sprinkler line
The every person whenever a leakage of pipe occurs in their houses or commercial building it create more problem so they want to solve it as soon as possible Whenever it occurs you should keep a cool head, and stop most of them until a plumbing profession will come to your house to do the pipe repair work.
Vigilance related issues in procurement of works
This document discusses various vigilance related issues in procurement of works projects. It addresses appointing consultants to avoid conflicts of interest, recoveries from contractor observations, bank guarantees, mobilization advances, transparency in tendering systems, mix design standards, post-tender negotiations, e-governance certification, purchase preference policies, tendering systems, delays in finalizing tenders and payments, pre-qualification criteria, manual notices of invitation to tender, acceptance criteria for awarding works, documenting decisions, and examining projects for vigilance issues like abnormal procurement, high rates awarded, delays in award, frequent discretion used, favors found, and biased awards.
CAD Outsourcing
Cad Outsourcing is the India base cad company which expertise in providing cad 2D Drafting, CAD design, 3D Modeling services to client globally. Choosing the right CAD Outsourcing partner is a important decision for your business. Cad Outsourcing is the one stop solution for any of your Cad needs. We can provide generous CAD services in KPO industries. Our ground-breaking outsourcing solutions for architects engineers have helped us to set up our footsteps in the global market.
Architectural Engineering, Civil Engineering, Structural Engineering, Mechanical Engineering, and Electrical Engineering Cad Outsourcing is the team of highly skilled, trained architects and engineers. Our engineers and Drafters can also work as per your standards.
Nit55
The document provides details for the tender notice to provide and lay a Global Category Synthetic Hockey Surface at SAG Centre, NEHU Campus in Shillong, Meghalaya. Key details include:
- The scope of work, estimated cost of Rs. 2.65 Crore, and earnest money deposit required.
- Timeline for completion is 150 days from start date.
- Instructions for submitting bids electronically and requirements for documents.
- Technical qualifications required for the synthetic surface to be FIH approved and valid for 6 months beyond bid submission.
- Payment terms including US Dollars for the surface work.
SMM7 Cost Summary Report
The document provides a breakdown of costs for various construction items including:
- Contractor general costs such as site staff, services, and temporary works.
- Demolition work including removing walls, structures, and fittings.
- Excavation and groundworks like reducing levels, trenches, and filling.
- Concrete work for foundations, beds and filling hollow walls.
- Masonry work for brick, block and precast concrete walls of various thicknesses and materials.
Sanotary installation
The document provides terminology and methodology for various items of construction works related to sanitary installations based on CPWD specifications. It includes definitions of over 50 terms related to sanitary works and describes the specifications and standards for appliances and fittings according to the CPWD including flushing cisterns, traps, pipes, joints, valves and other components of plumbing systems. Diagrams are provided to illustrate plumbing configurations.
80623277 cost-estimator
This document contains rate analysis information for various civil engineering works, including materials, equipment, labor, and unit rates. It includes rate schedules for fencing, hand and pressure pipes, roads, canal linings, flooring, and other construction items. Contact information is provided for the project advisor and students. The rate analysis is intended to provide ease for both educational and professional quantity surveying work.
Dsr Rate Anlaysis
This document is the Central Public Works Department's Analysis of Rates for Delhi, 2007. It provides a comprehensive analysis of rates for various construction-related items and replaces the previous 1997 version. The analysis incorporates current market rates for materials and labor in Delhi. It includes analysis for many new construction items and technologies to account for recent developments in the construction sector. The document is published in two volumes and is intended to serve as a useful reference for government agencies, private builders, and other construction professionals.
Water supply
The document summarizes the methodology for various items of construction works through power point presentations based on CPWD specifications. It discusses 14 power point presentations covering topics like earth work, mortars, concrete work, finishing, repairs to buildings, dismantling and demolishing, road work, sanitary installation, water supply, drainage, pile work, aluminium work, water proofing and horticulture/landscape. It then provides definitions for various terminology used in water supply works and discusses design and installation guidelines to ensure proper laying of underground piping and prevent issues like backflow, contamination, damage and wastage of water.
Recycling of waste water
Recycling of waste water and reactivation of water bodies are essential for water conservation, preventing floods and ecological balance.
Final Majarrah rev 0
This document contains a Gantt chart project schedule for the Majarrah Business Complex project. The schedule includes activities related to the Plaza Level portion of Stage I of the project, with durations from June 15, 2015 to December 31, 2015. Key activities include signing contracts, architectural and structural design, shop drawings submission and approval, material submittals and approvals, and installation of fountains, lighting, and landscaping elements. The critical path runs through design, shop drawings, material approvals, and installation activities, with the Plaza Level portion of Stage I scheduled to be completed by November 30, 2015.
House Drainage System
The document discusses house drainage systems. It defines key terms like wastewater, sewage, sullage, and plumbing system. It describes the principles of house drainage like gravity flow and ventilation. It explains traps, their types and qualities. Pipes are classified as soil, waste, and vent pipes. Finally, it summarizes four common plumbing systems - single stack, one pipe, single stack partially ventilated, and two pipe systems - comparing their features.
Module 6 module 4 draft sanitary and plumbing layout and details
The document provides information about drafting sanitary and plumbing layouts and details. It discusses drafting water distribution systems and sanitary and storm drainage layouts. It covers key terms, types of pipes, fittings, valves, and connections used. It also presents objectives, an introduction, and examples of common plumbing symbols and their meanings. The document is intended to familiarize students with concepts for designing and planning sanitary plumbing and sewerage layouts.
ANALYSS OF RATES-VOLUME-I
This document provides an analysis of rates for construction works in Delhi, India. It contains basic rates for materials, labor, equipment hire, and carriage. The basic rates section includes hire rates for plants like concrete mixers and road rollers. Labor rates are the minimum wages set by the Government of Delhi. Material rates are based on market rates in Delhi from April to October 2007. Sundries are considered at 1 times the cost index. The analysis aims to provide rate analysis for various construction items using the latest construction methods and materials.
MEASURING, CUTTING, AND JOINING PIPES
This document provides information on measuring, cutting, and joining different types of pipes used in plumbing. It discusses cast iron pipes, galvanized steel pipes, copper pipes, and plastic pipes. For each type, it outlines the recommended uses, considerations for working with the pipes, procedures for cutting and joining, and includes tables with additional technical specifications.
Drainage System For a Building
This presentation describes about drainage system from its basics. what is drainage system to types of drainage system and its components.
Plumbing training
This document provides an overview of plumbing systems, including water supply and drainage systems. It discusses various components of plumbing systems like pipes, pumps, valves, fixtures and tanks. It also covers relevant codes, standards, and authorities. Calculation methods for water supply systems are introduced, including determining water supply fixture units, water demand, pipe sizing, pressure calculation, and pump selection. Steps for performing hydraulic calculations are outlined.
types of drawing
There are several types of construction drawings that provide different information about a building project. Architectural drawings give a complete view of the building and placement of parts. Structural drawings explain the building's strength, materials, and reinforcement details. Plumbing and sanitary drawings show water and fixture locations and connections. Electrical drawings describe wiring, fixtures, and load calculations. As-built drawings reflect changes made during construction to record differences from the original design.
Plumbing in Architecture
This document provides information about plumbing systems and components. It begins with definitions of plumbing and discusses the history of plumbing from ancient civilizations. It then describes the basic plumbing components found in modern buildings, including water supply pipes, fixtures and traps, soil and waste pipes, and storm drainage. The document provides details on water supply systems, drainage systems, and plumbing fixtures and fittings. It also discusses plumbing codes and regulations from the National Building Code of India. Finally, it includes examples of plumbing system designs for apartments and case studies.
House Drainage System
The document discusses the key components and principles of a house drainage system. It defines important terms like wastewater, sewage, sullage, etc. It describes the main components of a house drainage system including traps (P, Q, S, floor, gully, intercepting), pipes (soil, waste, vent, rainwater), and sanitary fittings (wash basins, sinks, bath tubs, water closets, urinals, flushing cisterns). It also explains the principles of design and discusses the different systems of plumbing like single stack, one pipe, single stack partially ventilated, and two pipe systems.
More Related Content
Viewers also liked
How to fix a damaged landscape sprinkler line
The every person whenever a leakage of pipe occurs in their houses or commercial building it create more problem so they want to solve it as soon as possible Whenever it occurs you should keep a cool head, and stop most of them until a plumbing profession will come to your house to do the pipe repair work.
Vigilance related issues in procurement of works
This document discusses various vigilance related issues in procurement of works projects. It addresses appointing consultants to avoid conflicts of interest, recoveries from contractor observations, bank guarantees, mobilization advances, transparency in tendering systems, mix design standards, post-tender negotiations, e-governance certification, purchase preference policies, tendering systems, delays in finalizing tenders and payments, pre-qualification criteria, manual notices of invitation to tender, acceptance criteria for awarding works, documenting decisions, and examining projects for vigilance issues like abnormal procurement, high rates awarded, delays in award, frequent discretion used, favors found, and biased awards.
CAD Outsourcing
Cad Outsourcing is the India base cad company which expertise in providing cad 2D Drafting, CAD design, 3D Modeling services to client globally. Choosing the right CAD Outsourcing partner is a important decision for your business. Cad Outsourcing is the one stop solution for any of your Cad needs. We can provide generous CAD services in KPO industries. Our ground-breaking outsourcing solutions for architects engineers have helped us to set up our footsteps in the global market.
Architectural Engineering, Civil Engineering, Structural Engineering, Mechanical Engineering, and Electrical Engineering Cad Outsourcing is the team of highly skilled, trained architects and engineers. Our engineers and Drafters can also work as per your standards.
Nit55
The document provides details for the tender notice to provide and lay a Global Category Synthetic Hockey Surface at SAG Centre, NEHU Campus in Shillong, Meghalaya. Key details include:
- The scope of work, estimated cost of Rs. 2.65 Crore, and earnest money deposit required.
- Timeline for completion is 150 days from start date.
- Instructions for submitting bids electronically and requirements for documents.
- Technical qualifications required for the synthetic surface to be FIH approved and valid for 6 months beyond bid submission.
- Payment terms including US Dollars for the surface work.
SMM7 Cost Summary Report
The document provides a breakdown of costs for various construction items including:
- Contractor general costs such as site staff, services, and temporary works.
- Demolition work including removing walls, structures, and fittings.
- Excavation and groundworks like reducing levels, trenches, and filling.
- Concrete work for foundations, beds and filling hollow walls.
- Masonry work for brick, block and precast concrete walls of various thicknesses and materials.
Sanotary installation
The document provides terminology and methodology for various items of construction works related to sanitary installations based on CPWD specifications. It includes definitions of over 50 terms related to sanitary works and describes the specifications and standards for appliances and fittings according to the CPWD including flushing cisterns, traps, pipes, joints, valves and other components of plumbing systems. Diagrams are provided to illustrate plumbing configurations.
80623277 cost-estimator
This document contains rate analysis information for various civil engineering works, including materials, equipment, labor, and unit rates. It includes rate schedules for fencing, hand and pressure pipes, roads, canal linings, flooring, and other construction items. Contact information is provided for the project advisor and students. The rate analysis is intended to provide ease for both educational and professional quantity surveying work.
Dsr Rate Anlaysis
This document is the Central Public Works Department's Analysis of Rates for Delhi, 2007. It provides a comprehensive analysis of rates for various construction-related items and replaces the previous 1997 version. The analysis incorporates current market rates for materials and labor in Delhi. It includes analysis for many new construction items and technologies to account for recent developments in the construction sector. The document is published in two volumes and is intended to serve as a useful reference for government agencies, private builders, and other construction professionals.
Water supply
The document summarizes the methodology for various items of construction works through power point presentations based on CPWD specifications. It discusses 14 power point presentations covering topics like earth work, mortars, concrete work, finishing, repairs to buildings, dismantling and demolishing, road work, sanitary installation, water supply, drainage, pile work, aluminium work, water proofing and horticulture/landscape. It then provides definitions for various terminology used in water supply works and discusses design and installation guidelines to ensure proper laying of underground piping and prevent issues like backflow, contamination, damage and wastage of water.
Recycling of waste water
Recycling of waste water and reactivation of water bodies are essential for water conservation, preventing floods and ecological balance.
Final Majarrah rev 0
This document contains a Gantt chart project schedule for the Majarrah Business Complex project. The schedule includes activities related to the Plaza Level portion of Stage I of the project, with durations from June 15, 2015 to December 31, 2015. Key activities include signing contracts, architectural and structural design, shop drawings submission and approval, material submittals and approvals, and installation of fountains, lighting, and landscaping elements. The critical path runs through design, shop drawings, material approvals, and installation activities, with the Plaza Level portion of Stage I scheduled to be completed by November 30, 2015.
House Drainage System
The document discusses house drainage systems. It defines key terms like wastewater, sewage, sullage, and plumbing system. It describes the principles of house drainage like gravity flow and ventilation. It explains traps, their types and qualities. Pipes are classified as soil, waste, and vent pipes. Finally, it summarizes four common plumbing systems - single stack, one pipe, single stack partially ventilated, and two pipe systems - comparing their features.
Module 6 module 4 draft sanitary and plumbing layout and details
The document provides information about drafting sanitary and plumbing layouts and details. It discusses drafting water distribution systems and sanitary and storm drainage layouts. It covers key terms, types of pipes, fittings, valves, and connections used. It also presents objectives, an introduction, and examples of common plumbing symbols and their meanings. The document is intended to familiarize students with concepts for designing and planning sanitary plumbing and sewerage layouts.
ANALYSS OF RATES-VOLUME-I
This document provides an analysis of rates for construction works in Delhi, India. It contains basic rates for materials, labor, equipment hire, and carriage. The basic rates section includes hire rates for plants like concrete mixers and road rollers. Labor rates are the minimum wages set by the Government of Delhi. Material rates are based on market rates in Delhi from April to October 2007. Sundries are considered at 1 times the cost index. The analysis aims to provide rate analysis for various construction items using the latest construction methods and materials.
MEASURING, CUTTING, AND JOINING PIPES
This document provides information on measuring, cutting, and joining different types of pipes used in plumbing. It discusses cast iron pipes, galvanized steel pipes, copper pipes, and plastic pipes. For each type, it outlines the recommended uses, considerations for working with the pipes, procedures for cutting and joining, and includes tables with additional technical specifications.
Drainage System For a Building
This presentation describes about drainage system from its basics. what is drainage system to types of drainage system and its components.
Plumbing training
This document provides an overview of plumbing systems, including water supply and drainage systems. It discusses various components of plumbing systems like pipes, pumps, valves, fixtures and tanks. It also covers relevant codes, standards, and authorities. Calculation methods for water supply systems are introduced, including determining water supply fixture units, water demand, pipe sizing, pressure calculation, and pump selection. Steps for performing hydraulic calculations are outlined.
types of drawing
There are several types of construction drawings that provide different information about a building project. Architectural drawings give a complete view of the building and placement of parts. Structural drawings explain the building's strength, materials, and reinforcement details. Plumbing and sanitary drawings show water and fixture locations and connections. Electrical drawings describe wiring, fixtures, and load calculations. As-built drawings reflect changes made during construction to record differences from the original design.
Plumbing in Architecture
This document provides information about plumbing systems and components. It begins with definitions of plumbing and discusses the history of plumbing from ancient civilizations. It then describes the basic plumbing components found in modern buildings, including water supply pipes, fixtures and traps, soil and waste pipes, and storm drainage. The document provides details on water supply systems, drainage systems, and plumbing fixtures and fittings. It also discusses plumbing codes and regulations from the National Building Code of India. Finally, it includes examples of plumbing system designs for apartments and case studies.
House Drainage System
The document discusses the key components and principles of a house drainage system. It defines important terms like wastewater, sewage, sullage, etc. It describes the main components of a house drainage system including traps (P, Q, S, floor, gully, intercepting), pipes (soil, waste, vent, rainwater), and sanitary fittings (wash basins, sinks, bath tubs, water closets, urinals, flushing cisterns). It also explains the principles of design and discusses the different systems of plumbing like single stack, one pipe, single stack partially ventilated, and two pipe systems.
Viewers also liked (20)
Module 6 module 4 draft sanitary and plumbing layout and details
Module 6 module 4 draft sanitary and plumbing layout and details
WH-2060A-B01-ASD-418
- 1. NOTES: MECHANICAL/PLUMBING CIVIL/LANDSCAPE ARCHITECT DRAWN BY CHECKED BY ELECTRICAL/LOW CURRENTSTRUCTURAL PROJECT MANAGER SHEET NO.ROOM NO. DRAWING TYPE SCALE REVISION NO. DATEPROJECT NO. DRAWING TITLE: SITE KEY LAYOUT CLIENT: CONTRACTOR: CONSULTANT PROJECT TITLE: CONSULTANT REV. NO. DESCRIPTION DATE 03/05/2015 I. Ahmed J. Al-Khateeb 2060A NTS 00 Wooden Kitchen Shop Drawing B01-A401-R00-B-1043 WH-2060A-B01-ASD-418 - Door species: 2-sides laminated on 18mm Plywood - Box construction: 18mm Plywood with white melamine face - Type of construction: frameless - Finish: matching EGGER H 1692 ST15 Meran Cherry ISOMETRIC VIEW PLAN VIEW