This document contains 20 certificates awarded to Salah Eldin Khedr for completing various training programs at Weatherford International between 2011-2014. The certificates recognize his achievement in trainings related to IT helpdesk management, health and safety inductions, operational risk management, and other topics. Each certificate includes the name of the training, date of completion, and is signed by Bill Adey, the Director of Training, Development & Competency at Weatherford International.
Manoj Parayil completed training requirements for Weatherford International's EEP Competency Assessment on February 13, 2010. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service. The certificate was issued under reference number 381272 and signed by Bill Adey, the Director of Training, Development, and Competency.
Javier Cavazos completed training requirements for Weatherford International's EEP Competency Assessment on February 1, 2011. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service in the oil industry. The certificate was issued under reference number 740684 and signed by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
Javier Cavazos completed training requirements for Weatherford International's Essentials for Enterprise Excellence program on January 31, 2011. This certificate recognizes his achievement and commitment to providing excellent customer service in the industry. The certificate was issued by Bill Adey, Director of Training, Development, and Competency at Weatherford International.
Amgad Mikhail completed training requirements for Weatherford International's Introduction to Navigator course on November 11, 2014. He was awarded a certificate in recognition of achieving the training requirements and committing to providing excellent customer service. The certificate was issued by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
Fernando Salvat completed training requirements to become a Weatherford International WL-Cased Hole Field Engineer (JFE) from June 02, 2019 to July 25, 2019 in Abu Dhabi, ARE. This certificate recognizes his achievement and commitment to providing excellent customer service in the industry. The certificate was issued by his instructor Eduardo Trigo and signed by Ellen Chin, Vice President of Human Resources.
This certificate recognizes Abdul Qureshi for successfully completing Effective Communication Skills training from August 5-6, 2014 in Erbil, Iraq for Weatherford International. The certificate acknowledges his achievement and commitment to providing excellent customer service in the oilfield services industry. It was issued by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
This certificate recognizes Abdul Qureshi for successfully completing a training program from August 3-4, 2014 in Erbil, Iraq on being a dynamic and effective team leader for Weatherford International. The certificate acknowledges his achievement and commitment to providing excellent customer service in the oilfield services industry.
Salah Eldin Khedr received a Certificate of Completion from Weatherford Drilling International for completing the KEMS/EADS Operation & Maintenance Course from March 9-11, 2015 at the Weatherford Training Center in Abu Dhabi, UAE. He also received certificates for successfully completing Weatherford International training courses in Siemens S7 PLC from July 10-13, 2011 and Electronics for Electricians from March 25-29, 2012 at the Weatherford Training Center in Abu Dhabi, which recognized his achievement and commitment to customer service.
Manoj Parayil completed training requirements for Weatherford International's EEP Competency Assessment on February 13, 2010. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service. The certificate was issued under reference number 381272 and signed by Bill Adey, the Director of Training, Development, and Competency.
Javier Cavazos completed training requirements for Weatherford International's EEP Competency Assessment on February 1, 2011. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service in the oil industry. The certificate was issued under reference number 740684 and signed by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
Javier Cavazos completed training requirements for Weatherford International's Essentials for Enterprise Excellence program on January 31, 2011. This certificate recognizes his achievement and commitment to providing excellent customer service in the industry. The certificate was issued by Bill Adey, Director of Training, Development, and Competency at Weatherford International.
Amgad Mikhail completed training requirements for Weatherford International's Introduction to Navigator course on November 11, 2014. He was awarded a certificate in recognition of achieving the training requirements and committing to providing excellent customer service. The certificate was issued by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
Fernando Salvat completed training requirements to become a Weatherford International WL-Cased Hole Field Engineer (JFE) from June 02, 2019 to July 25, 2019 in Abu Dhabi, ARE. This certificate recognizes his achievement and commitment to providing excellent customer service in the industry. The certificate was issued by his instructor Eduardo Trigo and signed by Ellen Chin, Vice President of Human Resources.
This certificate recognizes Abdul Qureshi for successfully completing Effective Communication Skills training from August 5-6, 2014 in Erbil, Iraq for Weatherford International. The certificate acknowledges his achievement and commitment to providing excellent customer service in the oilfield services industry. It was issued by Bill Adey, the Director of Training, Development, and Competency at Weatherford International.
This certificate recognizes Abdul Qureshi for successfully completing a training program from August 3-4, 2014 in Erbil, Iraq on being a dynamic and effective team leader for Weatherford International. The certificate acknowledges his achievement and commitment to providing excellent customer service in the oilfield services industry.
Salah Eldin Khedr received a Certificate of Completion from Weatherford Drilling International for completing the KEMS/EADS Operation & Maintenance Course from March 9-11, 2015 at the Weatherford Training Center in Abu Dhabi, UAE. He also received certificates for successfully completing Weatherford International training courses in Siemens S7 PLC from July 10-13, 2011 and Electronics for Electricians from March 25-29, 2012 at the Weatherford Training Center in Abu Dhabi, which recognized his achievement and commitment to customer service.
Fernando Salvat completed training requirements to become a Weatherford International WL-Open Hole Field Engineer (JFE) from July 22, 2019 to August 22, 2019 in Abu Dhabi, ARE. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service in the industry. The certificate was signed by his instructor Francisco Guevara and Ellen Chin, Vice President of Human Resources at Weatherford International.
Fernando Salvat completed Weatherford International's Explosives Basic Training from June 5-10, 2019 in Abu Dhabi, United Arab Emirates. He was awarded a certificate in recognition of achieving the training requirements and commitment to providing excellent customer service in the industry. The certificate was signed by his instructor Eduardo Trigo and Ellen Chin, Vice President of Human Resources at Weatherford International.
Rip Logan completed Weatherford International's Technical Handbook Training from October 14-18, 2013 in Texas, USA. This certificate recognizes Rip Logan's achievement in completing the training requirements and commitment to providing excellent customer service in the oilfield services industry. The certificate was issued by instructor Rene Hoover and Training Director Bill Adey.
This document is Michael Page Engineering & Manufacturing's 2014 salary survey for Turkey. It provides an overview of the company and introduces the survey's index, which lists various engineering and manufacturing positions. For each position, the survey will give details on trends, career evolutions, and expected salaries in Turkey. The preliminary notes section outlines Michael Page's expertise in recruiting for technical roles and how they conducted research for the survey.
Global Consultants W.L.L. is a leading provider of advisory services and training solutions in Kuwait, established in 2001. It offers business advisory, financial consulting, quality certification, management consulting, and training solutions. It has a diversified portfolio and international certifications. Its vision is to be the preferred choice for clients by providing practical, innovative, and outstanding solutions. It serves a wide range of private and public sector clients in Kuwait and the GCC.
This certificate certifies that Glenn Hall has completed the requirements for a Diploma of Training Design and Development (TAE50211) from IJJL Corridors Training College (National Provider Code 51506). The qualification is recognized within the Australian Qualifications Framework and a summary of the employability skills developed can be found online.
MECWELD offers a tailored recruitment process attracting the highest standard of personnel to be professionally and effectively matched to specific client requirements on both a permanent and freelance basis. Working within Information Technology, Industrial engineering, Construction, Development, and mechanical & electrical Engineering services .
-Preparing, maintenance and inventory all SWT equipment in workshop and field
-Rig up and rig down SWT equipment on field, such as Flow Head, Choke manifold, heat Exchanger, Separator, Surge Tank, Compressor, Electric Centrifugal Pump, Flare/Burner Boom, etc
-Running/execute the equipment during the job
-Help the Supervisor to solving if there any problems/troubles during the job.
-Perform some paperwork during the job such as PTW (Permit To Work), JSA (Job Safety Analysis), Tool Box Talk, and sometimes doing reporting of data acquisition.
-Assist the Well test Eng at Sarulla Geothermal Project in North Sumatera to ensure, monitoring and controlling the project runs smoothly and safe in accordance with applicable procedure.
Expro provides well testing services and champions safety, quality, and treating customers as partners. They have achieved this position through their people, performance, and partnerships. Expro employs highly trained people and uses the best equipment and innovative technology to deliver high quality services safely. They have strong partnerships with customers built on reliability, accountability, and adapting to customers' needs.
This document discusses choke manifold operation and maintenance. It recommends turning the adjustable stem handle during pressure testing to check for leaks. It also provides guidance on checking the adjustable choke before and after operations, as well as tips for troubleshooting based on pressure readings. The document concludes by soliciting feedback from trainees.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
This document discusses P&IDs (piping and instrumentation diagrams), process systems, and safety systems used in well flow management. It defines a P&ID as a detailed schematic that replicates a well test setup based on industry standards. P&IDs are important for standardizing best practices and specifying what to replicate in the field. The document outlines common undesirable events in well test processes like overpressure and leaks. It describes the causes, effects, and detectable abnormal conditions for these events. Primary and secondary protections are discussed to prevent overpressure and leaks. Feedback from training participants is solicited at the end.
This document provides a running procedure for installing a Transformer R7 wellhead system. It includes 11 stages of the installation process with detailed steps for each stage. The stages include site preparation, installing the casing head, installing additional components like the drilling adapter, testing the BOP stack, running casing, installing the packoff and casing head cap, and installing the tubing spool. Dimensional drawings and a bill of materials are provided.
The document discusses applications of advanced ceramics for Schlumberger. It describes Schlumberger's use of ceramics in oil and gas exploration equipment, sensors, hydrocyclones, connectors, bearings, and parts for food processing. The document also outlines Dynamic-Ceramic's manufacturing process involving powder materials, pressing, casting, machining, firing, inspection, and applications in industries including oil and gas, sensors, bearings, and food processing.
The document provides guidance on reading and understanding Piping and Instrumentation Diagrams (PIDs) to identify process risks. It explains that to identify risks, one must understand the process, potential failures, and consequences. It then provides examples of common process equipment, their purposes, and typical failure modes. These include pumps, heat exchangers, storage tanks, separators, and valves. Control systems and sensors are also discussed. The document concludes by walking through identifying risks for a sample condensate pot process using the described methodology.
The document provides an overview of recent banking, economic, and business news in Sri Lanka. Key points include:
- Commercial Bank reduced interest rates on credit cards and opened a new drive-through ATM.
- Sri Lanka was recognized for its IT/BPM industry and debuted in a global entrepreneurship index, ranking 71st overall.
- Prospects are improving for Sri Lankan consumer durable retailers in 2015 due to factors like lower borrowing rates and electricity tariffs.
- Several new commercial real estate and hotel developments were announced, including an office complex and ITC's first overseas hotel in Colombo.
- The document is a certificate from Advanced Engineering Studies certifying that Mr. Rakesh has successfully completed NDT level 2 training and certification in penetrant testing, magnetic particle testing, ultrasonic testing, and radiographic testing.
- It provides the dates of certification, validity period, results of written and practical exams with scores above the minimum required in each method.
- The certificate enables the employer to certify the individual's qualifications according to applicable standards.
The document provides information about the Level 2 NVQ Certificate in Customer Service, including:
1) The qualification structure which outlines the mandatory and optional units needed to achieve the qualification, including unit numbers, titles, credit values and guided learning hours.
2) Details of the minimum credits required at level 2 and from each unit group.
3) Contact information for the relevant Sector Skills Bodies - the Council for Administration and the Institute of Customer Service.
R.L. Scorer received an EAL Level 3 Certificate in Assessing Vocational Achievement from Excellence, Achievement & Learning Limited on January 25, 2013. The certificate recognizes Scorer's successful completion of competencies required for the qualification. Scorer also received a Certificate of Unit Credit from Excellence, Achievement & Learning Limited on the same date for completing three units related to assessment principles, practices and occupational competence, totaling 15 credits.
CID (Certified Interconnect Designer-Advanced)
Professional development program provides objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested. This technical education holds the most benefit for PCB designers with at least 2 years of hands-on experience
Dolphin Marine is a marine services company established in 1977 that provides repair, maintenance, and inspection services. The document outlines Dolphin Marine's introduction, services, commitment to customer satisfaction, and quality processes. It also describes the company's management system context, including understanding organizational issues and stakeholder needs and expectations. The scope of Dolphin Marine's management system is defined as lifeboat inspection and repair, accommodation ladder and gangway, immersion suit inspection, and life jacket inspection.
Aklaque Waris Khan is seeking a challenging role in a growing Qatari organization where he can utilize his skills in operations supervision, maintenance management, and customer relationship building. He has over 10 years of experience in roles like Operations Supervisor, Maintenance and Store Executive, and Relationship Executive in industries including engineering, marine equipment, real estate, and banking. He holds an MBA and has strong skills in Microsoft Office, safety management, inventory management, and team leadership.
Fernando Salvat completed training requirements to become a Weatherford International WL-Open Hole Field Engineer (JFE) from July 22, 2019 to August 22, 2019 in Abu Dhabi, ARE. He was awarded a certificate in recognition of achieving the training and committing to providing excellent customer service in the industry. The certificate was signed by his instructor Francisco Guevara and Ellen Chin, Vice President of Human Resources at Weatherford International.
Fernando Salvat completed Weatherford International's Explosives Basic Training from June 5-10, 2019 in Abu Dhabi, United Arab Emirates. He was awarded a certificate in recognition of achieving the training requirements and commitment to providing excellent customer service in the industry. The certificate was signed by his instructor Eduardo Trigo and Ellen Chin, Vice President of Human Resources at Weatherford International.
Rip Logan completed Weatherford International's Technical Handbook Training from October 14-18, 2013 in Texas, USA. This certificate recognizes Rip Logan's achievement in completing the training requirements and commitment to providing excellent customer service in the oilfield services industry. The certificate was issued by instructor Rene Hoover and Training Director Bill Adey.
This document is Michael Page Engineering & Manufacturing's 2014 salary survey for Turkey. It provides an overview of the company and introduces the survey's index, which lists various engineering and manufacturing positions. For each position, the survey will give details on trends, career evolutions, and expected salaries in Turkey. The preliminary notes section outlines Michael Page's expertise in recruiting for technical roles and how they conducted research for the survey.
Global Consultants W.L.L. is a leading provider of advisory services and training solutions in Kuwait, established in 2001. It offers business advisory, financial consulting, quality certification, management consulting, and training solutions. It has a diversified portfolio and international certifications. Its vision is to be the preferred choice for clients by providing practical, innovative, and outstanding solutions. It serves a wide range of private and public sector clients in Kuwait and the GCC.
This certificate certifies that Glenn Hall has completed the requirements for a Diploma of Training Design and Development (TAE50211) from IJJL Corridors Training College (National Provider Code 51506). The qualification is recognized within the Australian Qualifications Framework and a summary of the employability skills developed can be found online.
MECWELD offers a tailored recruitment process attracting the highest standard of personnel to be professionally and effectively matched to specific client requirements on both a permanent and freelance basis. Working within Information Technology, Industrial engineering, Construction, Development, and mechanical & electrical Engineering services .
-Preparing, maintenance and inventory all SWT equipment in workshop and field
-Rig up and rig down SWT equipment on field, such as Flow Head, Choke manifold, heat Exchanger, Separator, Surge Tank, Compressor, Electric Centrifugal Pump, Flare/Burner Boom, etc
-Running/execute the equipment during the job
-Help the Supervisor to solving if there any problems/troubles during the job.
-Perform some paperwork during the job such as PTW (Permit To Work), JSA (Job Safety Analysis), Tool Box Talk, and sometimes doing reporting of data acquisition.
-Assist the Well test Eng at Sarulla Geothermal Project in North Sumatera to ensure, monitoring and controlling the project runs smoothly and safe in accordance with applicable procedure.
Expro provides well testing services and champions safety, quality, and treating customers as partners. They have achieved this position through their people, performance, and partnerships. Expro employs highly trained people and uses the best equipment and innovative technology to deliver high quality services safely. They have strong partnerships with customers built on reliability, accountability, and adapting to customers' needs.
This document discusses choke manifold operation and maintenance. It recommends turning the adjustable stem handle during pressure testing to check for leaks. It also provides guidance on checking the adjustable choke before and after operations, as well as tips for troubleshooting based on pressure readings. The document concludes by soliciting feedback from trainees.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
This document discusses P&IDs (piping and instrumentation diagrams), process systems, and safety systems used in well flow management. It defines a P&ID as a detailed schematic that replicates a well test setup based on industry standards. P&IDs are important for standardizing best practices and specifying what to replicate in the field. The document outlines common undesirable events in well test processes like overpressure and leaks. It describes the causes, effects, and detectable abnormal conditions for these events. Primary and secondary protections are discussed to prevent overpressure and leaks. Feedback from training participants is solicited at the end.
This document provides a running procedure for installing a Transformer R7 wellhead system. It includes 11 stages of the installation process with detailed steps for each stage. The stages include site preparation, installing the casing head, installing additional components like the drilling adapter, testing the BOP stack, running casing, installing the packoff and casing head cap, and installing the tubing spool. Dimensional drawings and a bill of materials are provided.
The document discusses applications of advanced ceramics for Schlumberger. It describes Schlumberger's use of ceramics in oil and gas exploration equipment, sensors, hydrocyclones, connectors, bearings, and parts for food processing. The document also outlines Dynamic-Ceramic's manufacturing process involving powder materials, pressing, casting, machining, firing, inspection, and applications in industries including oil and gas, sensors, bearings, and food processing.
The document provides guidance on reading and understanding Piping and Instrumentation Diagrams (PIDs) to identify process risks. It explains that to identify risks, one must understand the process, potential failures, and consequences. It then provides examples of common process equipment, their purposes, and typical failure modes. These include pumps, heat exchangers, storage tanks, separators, and valves. Control systems and sensors are also discussed. The document concludes by walking through identifying risks for a sample condensate pot process using the described methodology.
The document provides an overview of recent banking, economic, and business news in Sri Lanka. Key points include:
- Commercial Bank reduced interest rates on credit cards and opened a new drive-through ATM.
- Sri Lanka was recognized for its IT/BPM industry and debuted in a global entrepreneurship index, ranking 71st overall.
- Prospects are improving for Sri Lankan consumer durable retailers in 2015 due to factors like lower borrowing rates and electricity tariffs.
- Several new commercial real estate and hotel developments were announced, including an office complex and ITC's first overseas hotel in Colombo.
- The document is a certificate from Advanced Engineering Studies certifying that Mr. Rakesh has successfully completed NDT level 2 training and certification in penetrant testing, magnetic particle testing, ultrasonic testing, and radiographic testing.
- It provides the dates of certification, validity period, results of written and practical exams with scores above the minimum required in each method.
- The certificate enables the employer to certify the individual's qualifications according to applicable standards.
The document provides information about the Level 2 NVQ Certificate in Customer Service, including:
1) The qualification structure which outlines the mandatory and optional units needed to achieve the qualification, including unit numbers, titles, credit values and guided learning hours.
2) Details of the minimum credits required at level 2 and from each unit group.
3) Contact information for the relevant Sector Skills Bodies - the Council for Administration and the Institute of Customer Service.
R.L. Scorer received an EAL Level 3 Certificate in Assessing Vocational Achievement from Excellence, Achievement & Learning Limited on January 25, 2013. The certificate recognizes Scorer's successful completion of competencies required for the qualification. Scorer also received a Certificate of Unit Credit from Excellence, Achievement & Learning Limited on the same date for completing three units related to assessment principles, practices and occupational competence, totaling 15 credits.
CID (Certified Interconnect Designer-Advanced)
Professional development program provides objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested. This technical education holds the most benefit for PCB designers with at least 2 years of hands-on experience
Dolphin Marine is a marine services company established in 1977 that provides repair, maintenance, and inspection services. The document outlines Dolphin Marine's introduction, services, commitment to customer satisfaction, and quality processes. It also describes the company's management system context, including understanding organizational issues and stakeholder needs and expectations. The scope of Dolphin Marine's management system is defined as lifeboat inspection and repair, accommodation ladder and gangway, immersion suit inspection, and life jacket inspection.
Aklaque Waris Khan is seeking a challenging role in a growing Qatari organization where he can utilize his skills in operations supervision, maintenance management, and customer relationship building. He has over 10 years of experience in roles like Operations Supervisor, Maintenance and Store Executive, and Relationship Executive in industries including engineering, marine equipment, real estate, and banking. He holds an MBA and has strong skills in Microsoft Office, safety management, inventory management, and team leadership.
IFRS ACCA Training by Grant Thornton in IndiaPradeep Pandey
Diploma in International Financial Reporting (DipIFR) is for finance professionals who need to acquire more a detailed understanding of IFRS. DipIFR is a fast and efficient solution that will develop your current knowledge in this field. As well as how to apply the standards, you will learn the concepts and principles which underpin them. International Financial Reporting Standards (IFRS) are mandated in more than 100 countries worldwide.
ACCA's Diploma In IFRS is a well-recognised qualification for participants who wish to learn about IFRS standards and its practical implication on financial statements of the companies globally.
Our training program is based on syllabus of ACCA Diploma in IFRS. We not only prepare you for exam , Along with IFRS, we will also cover its differences with corresponding Ind AS and IGAAP to help participants learn the local reporting requirements and smoothly manage Ind AS implementation in India. We will also leverage our firm’s rich experience in different domains across various industries and its knowledge base to share practical insights, helping participants understand and learn complex concepts.
Grant Thornton IFRS training program is based on syllabus of ACCA Diploma in IFRS. We not only prepare you for exam , Along with IFRS, we will also cover its differences with corresponding Ind AS and IGAAP to help participants learn the local reporting requirements and smoothly manage Ind AS implementation in India. We will also leverage our firm’s rich experience in different domains across various industries and its knowledge base to share practical insights, helping participants understand and learn complex concepts.
About Grant Thornton ;
More than 47000 people
Base in over 130 countries and over 700 offices
Grant Thornton in India is one of the largest fully integrated Assurance, Tax & Advisory firms in India with 14 offices across India and a member firm within Grant Thornton International
Mamdouh A. Moriah is seeking a challenging lead position offering 19 years of experience in marketing, public relations, events, communications and advertising. He has a Bachelor's degree in Economics and Business Administration from King Abdulaziz University. His professional experience includes administrative roles at SABIC from 1997-2008 and as Office Manager for Mobily's Chief Operations Officer from 2008-2013. Currently he is a Professional in Compliance, Revenue Assurance and Fraud at Mobily.
The document provides an overview of the full structure of Walton, a Bangladeshi conglomerate. It describes the various departments within the organization, including finance, credit, marketing, audit, production, logistics, service, and human resources. It outlines the roles and responsibilities of each department as well as details about Walton's products, vision, history, and competitive strategies.
This document is a certificate awarded to Andrew Withers by Excellence, Achievement & Learning Limited for successful completion of the EAL Level 3 NVO Extended Diploma in Engineering Teqhnical Support (Engineering Drawing). The certificate details the specific units completed, including Complying with statutory regulations and organisational safety requirements. It also lists the total credit earned of 200. The certificate is signed by the Managing Director of Excellence, Achievement & Learning Limited and issued on January 2, 2014.
Rajesh Kumar has over 10 years of experience as a consultant delivering customized solutions to clients. He has expertise in analytics and data management using Business Objects to generate reports, build queries, and analyze data. He has completed several automation projects that reduced turnaround times and improved report accuracy for insurance clients.
The document outlines the rules and regulations for IDM qualifications, including assessments, examinations, and final grades. It covers general policies such as special considerations for students with disabilities or learning difficulties, deferrals and transfers, appeals, and complaints. It also provides details on assignment preparation and submission, examination procedures, and what constitutes malpractice. The IDM aims to ensure fairness, transparency and equal opportunities for all students.
The document provides a summary of key results and developments for Cálidda in the third quarter of 2013. Some highlights include:
- The construction of a main grid expansion project was completed, increasing Cálidda's natural gas distribution capacity.
- Cálidda submitted its five-year investment plan and new tariff scheme proposal to the regulator for approval.
- A new thermoelectric power plant was connected, becoming a major new client.
- Over 16,000 new residential and commercial clients were added in the quarter.
- Overall revenues and adjusted EBITDA increased compared to the same period last year.
Joydipto Dey is an electrical engineer with over 3 years of experience as a Marketing Engineer at Amod Stampings Pvt. Ltd. His responsibilities include technical analysis of client requirements, providing quotations, handling export orders, maintaining relationships with clients, and preparing sales analysis reports. He has a Bachelor's degree in Electrical Engineering and is proficient in English, Hindi, Bengali, and Gujarati.
ISO 22222 is an international quality standard for personal financial planners that aims to increase client confidence by providing benchmarks for ethics, competency, and the financial planning process. Financial planners who are ISO 22222 certified benefit from improved performance, marketing opportunities, and a standardized best practice approach, while clients benefit from a more professional and consistent service with assurances of quality. Certification involves adopting the requirements of ISO 22222, undergoing an on-site assessment, and participating in annual quality reviews to demonstrate continued commitment to the high standards.
Muhammad Nasir is seeking an accounting position. He has 8 years of experience in the UAE and holds a Bachelor of Commerce degree from the University of Punjab Lahore. Currently he works as an accountant for Siddco Group Ltd in Dubai using the Epicor ERP system. He has strong skills in accounting software like Tally, QuickBooks, and Excel.
Muhammad Nasir is seeking an accounting position. He has 8 years of experience in the UAE and 7 years in Pakistan. He holds a Bachelor's degree in Commerce and has strong skills in accounting software like Epicor, Tally, and QuickBooks. Currently he works as an accountant for Siddco Group in Dubai utilizing the Epicor ERP system.
Kuldeep Singh Rawat is seeking a position as an automotive technician. He has over 10 years of experience in customer service roles in the automotive industry. Currently, he works as a maintenance technician at dnata, where his responsibilities include performing preventative and corrective maintenance on ground support equipment. Previously, he held senior technician roles at Al bartawi Automobiles and Top Gear Service Center, where he ensured high quality service and repairs. He has expertise in technical problem solving, communication, and building relationships with customers.
1. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
IT Helpdesk Management - MEMOcast
November 02, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1311954
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
2. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Introduction to the Weatherford Competency System
May 22, 2014
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3897228
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
3. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Environmental Induction
August 25, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1189457
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
4. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Malaria Awareness Series: Lesson 3 - How She Finds and Bites You
March 23, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1532348
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
5. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Weatherford Health & Safety Induction
November 02, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1311715
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
6. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Introduction to Effective Hiring - CBT
November 07, 2013
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3566282
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
7. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
MENA IT Induction Program
November 02, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1311909
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
8. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Malaria Awareness Series: Lesson 1 - The World's Deadliest Animal
March 23, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1532181
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
9. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Introduction to Operational Risk Management
August 29, 2013 - August 29, 2013 - ISLAMABAD, PAK
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3450269
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
10. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
300568742 - Trade Compliance Procedure Manual Online Training (Online)
February 20, 2013
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 2827075
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
11. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Essentials for Enterprise Excellence
March 29, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1546407
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
12. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Introduction to OEPS
September 18, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 2139151
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
13. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
8140 - Code of Business Conduct
August 23, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1187339
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
14. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Weatherford Global Defensive Driving Online
December 25, 2013
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3650798
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
15. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Fatigue Management
December 25, 2013
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3650799
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
16. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
What's New in Windows 7 for Consumers
June 03, 2014
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3812203
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
17. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
EEP Competency Assessment
June 01, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1718249
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
18. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
MENA IT Induction Program
November 02, 2011
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1311909
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
19. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Malaria Awareness Series: Lesson 2 - How Malaria Kills
March 23, 2012
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 1532285
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency
20. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Weatherford Qualified Competence Assessor Course
March 20, 2014 - CAIRO, EGY
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3751657
________________________________________________________ ____________________________________________________________
May Bayoumi Bill Adey
Instructor Director - Training, Development &
Competency
21. EC ID# SK107810
Awarded to
Salah Eldin Khedr
For successfully completing the training requirements for Weatherford International
Weatherford Dropped Object Prevention Awareness
June 03, 2014
This certificate is awarded in recognition of achievement and commitment to
delivering the highest degree of customer service in the industry.
Ref # 3914420
____________________________________________________________
Bill Adey
Director - Training, Development &
Competency