1. VAUTID
Wear Plate
VAUTID 100
Base material all weldable steels, mostly structural steels
Hardfacing: High-chromium/high-carbon alloy on Fe basis
typical filler material analysis following
DIN EN ISO 6847 (%):
C: 4,5 – Cr: 28 – Fe: rest
hardness (DIN 32525-4): approx. 700 HV 10
approx. 60 HRC
layer thickness 3 to 20 mm
Recommended
applications
in cases of high abrasive wear at medium corro-
sion and low impact up to 350°C
Main Industries steel industry, cement industry, power stations,
mining, sand and gravel industry, concrete in-
dustry, glass industry, recycling industry, timber
wood industry, chemical industry, petrochemical
industry, etc.
Typical Applications chutes, screens, transfer stations, bunkers,
tubes, concrete mixers, mill linings, cyclons,
separators, bucket-wheel linings, excavator
bucket linings, tractor shovel front edges, dust
and ash ducts, fans, fan housings, etc.
VAUTID-VERSCHLEISS-TECHNIK Dr. Ing. Hans Wahl GmbH
73744 Ostfildern-Ruit P.O. Box 4110 phone: +49 711 4404-0 fax: +49 711 442039
www.vautid.de e-mail: vautid@vautid.de