v-plane DOA Services
•Download as PPTX, PDF•
0 likes•4,154 views
V-plane engineering GmbH is an aviation engineering firm with EASA approval to make changes to all types of aircraft under EASA.21J.323, including STCs and minor changes for large and small aircraft. They have 45 experts experienced on projects from 1 to 400 seats who can provide services like STC and repair approvals, certification plans, and Design Organization Approval support. They encourage contacting Henryk Bork, Bengt Sjödahl, or James J. Murray for assistance.
Report
Share
Report
Share
Recommended
v-plane approves your LOPA change
v-plane is an independent German design organization that approves modifications to aircraft, including full cabin reconfigurations, under EASA regulations. They provide services for modification approval planning and implementation, including analyzing layout concepts, establishing certifiable solutions, and issuing the final approval. Their services cover modifications to aircraft from manufacturers like Airbus, Boeing, Bombardier and others. They are located in Hamburg, Germany and approved under EASA 21J.323 to perform supplemental type certificate approvals and repairs.
work examples
This document lists various architectural projects and competitions that Inga Klingauf has worked on from 2003 to 2007. Some of the projects include a revolution museum in Budapest, Hungary from 2006, a school in Berlin, Germany from 2005, a serigraph project on the history of numbers from 2005, and receiving second award for a school competition in Traun, Austria from 2006 while working for KLP-architects.
B&B Attachments exhibits at CeMat Hannover, Germany
B&B Attachments, a UK-based supplier of forklift truck attachments, will exhibit its BlockMaster attachments and Powermount Quick Release system at the CeMAT 2016 trade fair in Hannover, Germany from May 31st to June 3rd. CeMAT is the leading global trade fair for materials handling and logistics technology, hosting over 1,000 exhibitors from 66 countries. Specifically, B&B will showcase its K320 and J250R Overhead Block Clamp Attachments for moving bricks and blocks, along with the PowerMount quick release system that allows changing attachments in 90 seconds without an engineer. These products will be exhibited at the construction area of the KAUP open-air site.
Engineering and Manufacturing
This document provides information about Mane Engineering and Manufacturing, a recruitment company that specializes in engineering and technical roles. It lists their office locations in the UK, Netherlands, and Germany and contact details. It describes Mane's experience recruiting for industries like automotive, aerospace, defence, medical, and manufacturing. It also lists some of the engineering and manufacturing roles they recruit for.
New Pathways to a Hydrogen Society“
- The document discusses ARENA-INNOVATION's goal of positioning itself as the coordinating company for hydrogen activities in China similar to NOW GmbH in Germany. It aims to deploy best practice fuel cell projects in China through EU funding programs and introduce fuel cell micro-CHP technologies and hydrogen fuel cell buses. ARENA-INNOVATION seeks investors, consultants, energy companies, public transport operators, municipalities and industry to partner with to support the development of a "hydrogen society" in China.
Liebherr
The Liebherr Group is a family-owned business founded in 1949 in Switzerland that employs over 38,000 people across 130 companies worldwide. They operate in 17 countries on four continents and generate around 9.8 billion euros in annual turnover. Their product range includes tower cranes, mobile construction cranes, mining equipment, domestic appliances, and more. Key values include independence, trustworthiness, innovation, employee focus, quality, and responsibility.
Company profile Nigmann Messeservice & Hody Fair Services & Design
Hody Fair services & Design Co., Ltd. – with – Nigmann Messeservice (Germany)
We offer full services fair and exhibition stand contractor, committed to quality and worthy price.
Our market covers all over European.
Construction by German with more than 20 years experience
We can build both Customize and System booth
Booth space from 9 – 1,000 sq.m.
We have 2 headquarters in Thailand and Germany to support your project.
TEBA Mission to Europe - IZB Germany
Internationalization support for Thai SME's.
To achieve the goal of Thailand becoming a global supplier for the Automotive industry, Thai European Business Association (TEBA) proposes a participation at the IZB (Internationale Zuliefererbörse 2014).
The International Suppliers Fair (IZB), the leading European trade fair for the automotive supplier industry, will take place in Wolfsburg from 14th to 16th October 2014.
Recommended
v-plane approves your LOPA change
v-plane is an independent German design organization that approves modifications to aircraft, including full cabin reconfigurations, under EASA regulations. They provide services for modification approval planning and implementation, including analyzing layout concepts, establishing certifiable solutions, and issuing the final approval. Their services cover modifications to aircraft from manufacturers like Airbus, Boeing, Bombardier and others. They are located in Hamburg, Germany and approved under EASA 21J.323 to perform supplemental type certificate approvals and repairs.
work examples
This document lists various architectural projects and competitions that Inga Klingauf has worked on from 2003 to 2007. Some of the projects include a revolution museum in Budapest, Hungary from 2006, a school in Berlin, Germany from 2005, a serigraph project on the history of numbers from 2005, and receiving second award for a school competition in Traun, Austria from 2006 while working for KLP-architects.
B&B Attachments exhibits at CeMat Hannover, Germany
B&B Attachments, a UK-based supplier of forklift truck attachments, will exhibit its BlockMaster attachments and Powermount Quick Release system at the CeMAT 2016 trade fair in Hannover, Germany from May 31st to June 3rd. CeMAT is the leading global trade fair for materials handling and logistics technology, hosting over 1,000 exhibitors from 66 countries. Specifically, B&B will showcase its K320 and J250R Overhead Block Clamp Attachments for moving bricks and blocks, along with the PowerMount quick release system that allows changing attachments in 90 seconds without an engineer. These products will be exhibited at the construction area of the KAUP open-air site.
Engineering and Manufacturing
This document provides information about Mane Engineering and Manufacturing, a recruitment company that specializes in engineering and technical roles. It lists their office locations in the UK, Netherlands, and Germany and contact details. It describes Mane's experience recruiting for industries like automotive, aerospace, defence, medical, and manufacturing. It also lists some of the engineering and manufacturing roles they recruit for.
New Pathways to a Hydrogen Society“
- The document discusses ARENA-INNOVATION's goal of positioning itself as the coordinating company for hydrogen activities in China similar to NOW GmbH in Germany. It aims to deploy best practice fuel cell projects in China through EU funding programs and introduce fuel cell micro-CHP technologies and hydrogen fuel cell buses. ARENA-INNOVATION seeks investors, consultants, energy companies, public transport operators, municipalities and industry to partner with to support the development of a "hydrogen society" in China.
Liebherr
The Liebherr Group is a family-owned business founded in 1949 in Switzerland that employs over 38,000 people across 130 companies worldwide. They operate in 17 countries on four continents and generate around 9.8 billion euros in annual turnover. Their product range includes tower cranes, mobile construction cranes, mining equipment, domestic appliances, and more. Key values include independence, trustworthiness, innovation, employee focus, quality, and responsibility.
Company profile Nigmann Messeservice & Hody Fair Services & Design
Hody Fair services & Design Co., Ltd. – with – Nigmann Messeservice (Germany)
We offer full services fair and exhibition stand contractor, committed to quality and worthy price.
Our market covers all over European.
Construction by German with more than 20 years experience
We can build both Customize and System booth
Booth space from 9 – 1,000 sq.m.
We have 2 headquarters in Thailand and Germany to support your project.
TEBA Mission to Europe - IZB Germany
Internationalization support for Thai SME's.
To achieve the goal of Thailand becoming a global supplier for the Automotive industry, Thai European Business Association (TEBA) proposes a participation at the IZB (Internationale Zuliefererbörse 2014).
The International Suppliers Fair (IZB), the leading European trade fair for the automotive supplier industry, will take place in Wolfsburg from 14th to 16th October 2014.
IZB 2016 - Info Package
The document provides information about the AutoBook International Pavilion exhibiting at the IZB 2016 trade fair in Wolfsburg, Germany from October 18-20. The pavilion will allow automotive suppliers to showcase their products and services to key customers from Volkswagen and other automakers. The document outlines various booth package options for exhibitors ranging in price from €2,000 to €15,000, which include display space, networking opportunities, and business matchmaking services to connect with automotive buyers. Interested suppliers are encouraged to book an exhibition space by September 7th to secure their participation in this event endorsed by Volkswagen.
IZB 2016 - Thailand Automotive Pavilion Info Package
The document provides information about the AutoBook International Pavilion exhibiting at the IZB 2016 trade fair in Wolfsburg, Germany from October 18-20. The pavilion will allow automotive suppliers to showcase their products and services to key customers from Volkswagen and other automakers. The document outlines various booth package options for exhibitors ranging in price from €2,000 to €15,000, which include display space, networking opportunities, and business matchmaking services to connect with customers. Interested suppliers are encouraged to book an exhibition space by September 7th to secure their participation in this event focused on the automotive supplier industry.
Presentation Liebherr Group And Component Technologies (En)
The Liebherr Group is a family-owned business founded in 1949 with over 100 companies worldwide and more than 32,000 employees. It produces a wide range of machinery across several divisions including earthmoving, cranes, machine tools, aerospace, appliances, and components. Liebherr-Component Technologies has several component manufacturing plants across Europe that produce items like engines, gearboxes, bearings, cylinders, and electronics.
Equi Expo Group Presentation Slide Share
The document lists various exhibition and interior projects including the names of the projects, the exhibitions or locations they were featured at, and the cities and years. It includes projects like HUNTSMAN - UTECH 2009 - MAASTRICHT, VASCO - ISH 2009 - FRANKFURT, and SPHINX - INTERIOR 2009 - MAASTRICHT. It then notes that it is shutting down and saving the project information.
Press Release - ARTS at AIRTEC 2016
From 25 to 27 October, the 11th supplier fair for the aerospace industry is taking place at the Munich exhibition centre. ARTS is also represented this year at the bavAIRia joint stand (Stand D 37).
Vienna Main Station - more than a station
The document discusses the development of Vienna's main train station from 1850 to the present. It describes how the city previously had separate south and east train stations, but is now consolidating train operations into a single main station. The main station project involves not just the construction of the new train station, but also significant urban development around it, including new residential and commercial areas. The project aims to transform the area around the main station into a vibrant new urban district well-connected to the rest of the city by public transit.
Peugeot508 mixx awards
The document outlines a launch campaign for the Peugeot 508 that includes pre-launch newsletter ads, a PR article, a microsite, floating display units, billboard ads, video ads, mobile app ads, and print ads. The print campaign involves airport and office building ads, including 165 posters in business towers and elevator ads. The document tracks metrics from the digital display launch campaign.
100430 Cve Md
Marcus Oliver Dietzsch is the Office Director of AUKETT + HEESE Frankfurt. He has over 20 years of experience in architecture and project management. Some of his recent projects include a 30,000 square meter office building in Eschborn and renovations for an 8,000 square meter office and industrial space in Eningen.
ONI Michael-CV 1 cem + foto
Michael Oni has over 30 years of experience in industrial project consulting, renewable energy, environmental services, sustainable cement and concrete production, and commodity trading. He holds an MSc in Soil Science from the State University of Ghent and a Bachelor's degree in civil engineering from the European University of Antwerp. Oni is fluent in English, French, and has a good knowledge of German.
Press Release - ARTS southern site has moved
The ARTS southern site has moved from Munich Pasing to the business park near the “Sonderflughafen Oberpfaffenhofen” in Gilching.
Vienna: Project Management Vienna Central Station
Vienna: Project Management Vienna Central Station, presentation held within the Capital Summit 2015 organized by NALED and City of Belgrade, with the support of Elnos group, Star Refrigeration&Emerson Techologies and Siemens.
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent Informationen
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent InformationenMoving Targets Consulting GmbH
Jedes Jahr zur Jahrestagung der Patentinformationszentren Deutschlands dürfen wir ein Update zum Status: Crowd Sourcing in der Patentszene geben. Hier unsere diesjährigen Slides. Continental presents: Intelligent Tire Technology in the context of big data
Thomas Scheid, Project Manager at Continental Engineering Services gave a presentation on least years Intelligent Tire Technology conference about intelligent tire technology in the context of big data.
Have a look at the presentation and gain a deeper understanding of:
- Generation of relevant information in the vehicle including road friction estimation, road type classification and traffic sign recognition
- Data transfer
- Data mining
The presentation also includes an introduction and outlook: http://bit.ly/2vAEjLv
#TCI2019 Break - out sessions: Upper Austria Case
The document discusses using Lego Serious Play techniques to develop strategies for an automotive cluster in Upper Austria. It provides an agenda for a workshop that uses Lego models to help participants build individual and shared visions for the cluster. Participants first construct models representing their own visions and then work together to build a joint vision. They also use the Lego pieces to represent ideal future products, services, and team structures to support the shared vision. The goal is to generate creative ideas and commitments through an interactive process of building, storytelling, and reflection.
Unify OpenScape 4000 Course Certificate Antoni
This document is a certificate of participation from Unify Academy certifying that AntoniPadua Kamugisha received training on the Marketintroduction Update course OpenScape 4000 V8R0 for Service on October 4, 2016. The course covered topics such as upgrading OpenScape 4000 from version 7 to 8R0, new hardware branches, licensing concepts, SIP features, system features, and changes to Assistant/Manager and ACWIN/OSPEL in version 8R0.
ARTS Company Presentation
The following presentation introduces the solution provider for the aerospace industry named ARTS. It also presents the products and services ARTS is offering: Experts (Personal Leasing, Personal Recruitment), Processes (BPO Consulting, Consulting, HR Consulting), Solutions (Work Packages & Project Management - Supply Chain Management, M & E, Production Services ...)
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...Booosting platform voor koplopers in bouwinnovatie
28 november 2019 vond de Booosting activiteit "Innovaties in glasvezelversterkt beton" plaats bij mbX @Concrete Valley te Bergen op Zoom.
Centraal stond de Winkelcentrum Leidschenhage in Leidschendam dat nu wordt gemoderniseerd tot The Mall of the Netherlands met haar zeer bijzondere gevel van witte prefab betonelementen.
Hier de presentatie van Bjorn van Overveld, bedrijfsleider mbX.AXYS Technologies presenting at Ocean Business 2017 in Southampton, UK
This press release announces that AXYS Technologies will be exhibiting at Ocean Business 2017 in Southampton, UK from April 4-6. AXYS will showcase their remote environmental monitoring systems including WindSentinel FLiDAR and TRIAXYS buoys. On April 4th, Graham Howe from AXYS will give a presentation on how their AXYS-APS system has improved weather forecasting for offshore wind projects. Ocean Business is an international event for ocean technology that saw a 29% increase in visitors at the last event in 2015. AXYS Technologies is a Canadian company with over 40 years of experience designing and installing remote monitoring systems around the world.
Sofia Motor Show 2013
The document provides information about the Sofia Motor Show 2013 which was held from June 14th to 23rd at the Inter Expo Center in Sofia. Several automakers participated including Jeep, Mercedes-Benz, Mitsubishi, and Renault-Nissan. Jeep displayed the Grand Cherokee and Wrangler models. Mercedes-Benz had a large 440 square meter space showcasing several models and highlighting their 45 years as AMG. Mitsubishi presented the Space Star, Outlander, ASX, Pajero and Lancer. The event also included a press conference hosted by Balkan Star on June 14th from 17:00-18:00 at the Mercedes-Ben
Exhibition2
The document discusses several Egyptian trade exhibitions that Comfort, a hotel supplier, has exhibited at over multiple years. These exhibitions include Hace for hotel suppliers, Hotex for Red Sea hotel suppliers, Le Marche for home furnishings, Indoors for furniture and interiors, and Edge. For each exhibition, Comfort created 3D designs and actual booth designs to showcase and promote their products and interact with consumers.
Spectrum Aeromed Air Ambulance Solutions
Spectrum Aeromed is a leading global designer and manufacturer of custom air medical and air ambulance equipment for fixed and rotor wing aircraft. The company is qualified to produce specialized life support solutions for air, ground and marine support applications. Spectrum Aeromed holds more than 60 Supplemental Type Certificates (STCs) covering more than 400 models of aircraft. Spectrum Aeromed is headquartered in Fargo, ND with a 17,000-square-foot manufacturing facility. For more information, visit www.spectrum-aeromed.com.
Renews live windenergy-hamburg-2018-day-
What are the most vital issues shaping the wind sector nowadays?
Discover Markus Tacke's vision of the new challenges and short and long term prospects in this interview, held during the GlobalWind Summit by reNEWSS
#BeyondTheWind
More Related Content
What's hot
IZB 2016 - Info Package
The document provides information about the AutoBook International Pavilion exhibiting at the IZB 2016 trade fair in Wolfsburg, Germany from October 18-20. The pavilion will allow automotive suppliers to showcase their products and services to key customers from Volkswagen and other automakers. The document outlines various booth package options for exhibitors ranging in price from €2,000 to €15,000, which include display space, networking opportunities, and business matchmaking services to connect with automotive buyers. Interested suppliers are encouraged to book an exhibition space by September 7th to secure their participation in this event endorsed by Volkswagen.
IZB 2016 - Thailand Automotive Pavilion Info Package
The document provides information about the AutoBook International Pavilion exhibiting at the IZB 2016 trade fair in Wolfsburg, Germany from October 18-20. The pavilion will allow automotive suppliers to showcase their products and services to key customers from Volkswagen and other automakers. The document outlines various booth package options for exhibitors ranging in price from €2,000 to €15,000, which include display space, networking opportunities, and business matchmaking services to connect with customers. Interested suppliers are encouraged to book an exhibition space by September 7th to secure their participation in this event focused on the automotive supplier industry.
Presentation Liebherr Group And Component Technologies (En)
The Liebherr Group is a family-owned business founded in 1949 with over 100 companies worldwide and more than 32,000 employees. It produces a wide range of machinery across several divisions including earthmoving, cranes, machine tools, aerospace, appliances, and components. Liebherr-Component Technologies has several component manufacturing plants across Europe that produce items like engines, gearboxes, bearings, cylinders, and electronics.
Equi Expo Group Presentation Slide Share
The document lists various exhibition and interior projects including the names of the projects, the exhibitions or locations they were featured at, and the cities and years. It includes projects like HUNTSMAN - UTECH 2009 - MAASTRICHT, VASCO - ISH 2009 - FRANKFURT, and SPHINX - INTERIOR 2009 - MAASTRICHT. It then notes that it is shutting down and saving the project information.
Press Release - ARTS at AIRTEC 2016
From 25 to 27 October, the 11th supplier fair for the aerospace industry is taking place at the Munich exhibition centre. ARTS is also represented this year at the bavAIRia joint stand (Stand D 37).
Vienna Main Station - more than a station
The document discusses the development of Vienna's main train station from 1850 to the present. It describes how the city previously had separate south and east train stations, but is now consolidating train operations into a single main station. The main station project involves not just the construction of the new train station, but also significant urban development around it, including new residential and commercial areas. The project aims to transform the area around the main station into a vibrant new urban district well-connected to the rest of the city by public transit.
Peugeot508 mixx awards
The document outlines a launch campaign for the Peugeot 508 that includes pre-launch newsletter ads, a PR article, a microsite, floating display units, billboard ads, video ads, mobile app ads, and print ads. The print campaign involves airport and office building ads, including 165 posters in business towers and elevator ads. The document tracks metrics from the digital display launch campaign.
100430 Cve Md
Marcus Oliver Dietzsch is the Office Director of AUKETT + HEESE Frankfurt. He has over 20 years of experience in architecture and project management. Some of his recent projects include a 30,000 square meter office building in Eschborn and renovations for an 8,000 square meter office and industrial space in Eningen.
ONI Michael-CV 1 cem + foto
Michael Oni has over 30 years of experience in industrial project consulting, renewable energy, environmental services, sustainable cement and concrete production, and commodity trading. He holds an MSc in Soil Science from the State University of Ghent and a Bachelor's degree in civil engineering from the European University of Antwerp. Oni is fluent in English, French, and has a good knowledge of German.
Press Release - ARTS southern site has moved
The ARTS southern site has moved from Munich Pasing to the business park near the “Sonderflughafen Oberpfaffenhofen” in Gilching.
Vienna: Project Management Vienna Central Station
Vienna: Project Management Vienna Central Station, presentation held within the Capital Summit 2015 organized by NALED and City of Belgrade, with the support of Elnos group, Star Refrigeration&Emerson Techologies and Siemens.
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent Informationen
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent InformationenMoving Targets Consulting GmbH
Jedes Jahr zur Jahrestagung der Patentinformationszentren Deutschlands dürfen wir ein Update zum Status: Crowd Sourcing in der Patentszene geben. Hier unsere diesjährigen Slides. Continental presents: Intelligent Tire Technology in the context of big data
Thomas Scheid, Project Manager at Continental Engineering Services gave a presentation on least years Intelligent Tire Technology conference about intelligent tire technology in the context of big data.
Have a look at the presentation and gain a deeper understanding of:
- Generation of relevant information in the vehicle including road friction estimation, road type classification and traffic sign recognition
- Data transfer
- Data mining
The presentation also includes an introduction and outlook: http://bit.ly/2vAEjLv
#TCI2019 Break - out sessions: Upper Austria Case
The document discusses using Lego Serious Play techniques to develop strategies for an automotive cluster in Upper Austria. It provides an agenda for a workshop that uses Lego models to help participants build individual and shared visions for the cluster. Participants first construct models representing their own visions and then work together to build a joint vision. They also use the Lego pieces to represent ideal future products, services, and team structures to support the shared vision. The goal is to generate creative ideas and commitments through an interactive process of building, storytelling, and reflection.
Unify OpenScape 4000 Course Certificate Antoni
This document is a certificate of participation from Unify Academy certifying that AntoniPadua Kamugisha received training on the Marketintroduction Update course OpenScape 4000 V8R0 for Service on October 4, 2016. The course covered topics such as upgrading OpenScape 4000 from version 7 to 8R0, new hardware branches, licensing concepts, SIP features, system features, and changes to Assistant/Manager and ACWIN/OSPEL in version 8R0.
ARTS Company Presentation
The following presentation introduces the solution provider for the aerospace industry named ARTS. It also presents the products and services ARTS is offering: Experts (Personal Leasing, Personal Recruitment), Processes (BPO Consulting, Consulting, HR Consulting), Solutions (Work Packages & Project Management - Supply Chain Management, M & E, Production Services ...)
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...Booosting platform voor koplopers in bouwinnovatie
28 november 2019 vond de Booosting activiteit "Innovaties in glasvezelversterkt beton" plaats bij mbX @Concrete Valley te Bergen op Zoom.
Centraal stond de Winkelcentrum Leidschenhage in Leidschendam dat nu wordt gemoderniseerd tot The Mall of the Netherlands met haar zeer bijzondere gevel van witte prefab betonelementen.
Hier de presentatie van Bjorn van Overveld, bedrijfsleider mbX.AXYS Technologies presenting at Ocean Business 2017 in Southampton, UK
This press release announces that AXYS Technologies will be exhibiting at Ocean Business 2017 in Southampton, UK from April 4-6. AXYS will showcase their remote environmental monitoring systems including WindSentinel FLiDAR and TRIAXYS buoys. On April 4th, Graham Howe from AXYS will give a presentation on how their AXYS-APS system has improved weather forecasting for offshore wind projects. Ocean Business is an international event for ocean technology that saw a 29% increase in visitors at the last event in 2015. AXYS Technologies is a Canadian company with over 40 years of experience designing and installing remote monitoring systems around the world.
Sofia Motor Show 2013
The document provides information about the Sofia Motor Show 2013 which was held from June 14th to 23rd at the Inter Expo Center in Sofia. Several automakers participated including Jeep, Mercedes-Benz, Mitsubishi, and Renault-Nissan. Jeep displayed the Grand Cherokee and Wrangler models. Mercedes-Benz had a large 440 square meter space showcasing several models and highlighting their 45 years as AMG. Mitsubishi presented the Space Star, Outlander, ASX, Pajero and Lancer. The event also included a press conference hosted by Balkan Star on June 14th from 17:00-18:00 at the Mercedes-Ben
Exhibition2
The document discusses several Egyptian trade exhibitions that Comfort, a hotel supplier, has exhibited at over multiple years. These exhibitions include Hace for hotel suppliers, Hotex for Red Sea hotel suppliers, Le Marche for home furnishings, Indoors for furniture and interiors, and Edge. For each exhibition, Comfort created 3D designs and actual booth designs to showcase and promote their products and interact with consumers.
What's hot (20)
IZB 2016 - Thailand Automotive Pavilion Info Package
IZB 2016 - Thailand Automotive Pavilion Info Package
Presentation Liebherr Group And Component Technologies (En)
Presentation Liebherr Group And Component Technologies (En)
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent Informationen
PiZnet Jahrestagung 2014: Update zu Crowd Sourcing und Patent Informationen
Continental presents: Intelligent Tire Technology in the context of big data
Continental presents: Intelligent Tire Technology in the context of big data
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...
20191128 Booosting - Presentatie The Mall of the Netherlands - Bjorn van Ove...
AXYS Technologies presenting at Ocean Business 2017 in Southampton, UK
AXYS Technologies presenting at Ocean Business 2017 in Southampton, UK
Similar to v-plane DOA Services
Spectrum Aeromed Air Ambulance Solutions
Spectrum Aeromed is a leading global designer and manufacturer of custom air medical and air ambulance equipment for fixed and rotor wing aircraft. The company is qualified to produce specialized life support solutions for air, ground and marine support applications. Spectrum Aeromed holds more than 60 Supplemental Type Certificates (STCs) covering more than 400 models of aircraft. Spectrum Aeromed is headquartered in Fargo, ND with a 17,000-square-foot manufacturing facility. For more information, visit www.spectrum-aeromed.com.
Renews live windenergy-hamburg-2018-day-
What are the most vital issues shaping the wind sector nowadays?
Discover Markus Tacke's vision of the new challenges and short and long term prospects in this interview, held during the GlobalWind Summit by reNEWSS
#BeyondTheWind
4th International Conference Drivetrain Concepts for Wind Turbines
• Examine medium speed drives and how they perform in the field
• Review innovative test facilities and tools for reliable results
• Gain the wind park operators’ view on O&M experience and lifecycle cost
• Hear about ways to identify and reduce structure-borne noise
• Find efficient strategies to improve gearbox reliability throughout the lifecycle
Find more Infos here: http://bit.ly/Drivetrain_brochure
Tordeurs benoit 0920_cv_pro_rev02_aa
This CV and many licences, are not enough for a job because of a problem with SHARIA law and on top I was found unguilty
MTU Aerospace uses EOS DMLS for 3D Printing of Jet Engines
MTU Aero Engines relies on additive manufacturing to produce borescope bosses for the Geared Turbo Fan engine that will power the Airbus A320neo. The bosses were previously cast or milled, but additive manufacturing allows for greater design freedom, reduced production costs, and delivery time savings. MTU worked with EOS to develop the process, gaining certification for its use in serial production. Additive manufacturing is used to produce 16 bosses per build for up to 2,000 parts per year, resulting in double-digit percentage cost savings over previous methods.
Portfolio english
This document lists the major projects the customer has worked on as a technical translator and proofreader/copy editor between 1997-2008. These include projects for Sevmash shipbuilding, Kamov helicopter factory, and various translation companies. The list includes over 100 companies and organizations across various industries such as energy, manufacturing, transportation, telecommunications, and more.
Mst326 9 Pl Rcd
The document discusses product liability and safety factors that manufacturers must consider. It notes that manufacturers are responsible for any damages or injuries caused by their products. Documentation of product safety testing is important for insurance. Standards organizations like the British Standards Institution and European Committee for Standardization provide safety standards for manufacturers. The CE marking is required for products sold in the European Union and signifies the product meets EU health, safety, and environmental standards. The Recreational Craft Directive establishes design and construction standards for boats and watercraft sold in the EU.
Germany_shipbuilding activities 2016
This document summarizes information about the German shipbuilding industry. It provides statistics on global new orders for ships from 2011-2016. It outlines the major ship types ordered in the first half of 2016 and lists the major German shipyards. It also discusses recent contracts between Genting Hong Kong and MV-Werften to build 10 cruise ships, and provides details on MV-Werften's order book and investment plans. The document emphasizes that German shipbuilding is embracing Industry 4.0 technologies and aims to promote "Shipbuilding 4.0".
Functional Safety for Noroad Vehicles
Many accidents and even fatalities are caused by earth-moving machinery, crawler cranes,tractors, Special Foundation Equipment, and farm machinery,. Especially if users/drivers do not behave as intended, or if safety is not properly guaranteed.
At the same time electronic control systems are responsible of the core functionality in the vehicles, e.g., engine control, braking, and steering; and the functions performed by the vehicles, e.g., buckets, telescopic handlers, or drills. Authorities currently increase the pressure on vehicle manufacturers to comply with safety standards for their electronic systems. The market will increase expectations on products to be certified according to e.g. ISO 13849, 25119, 15998, 12100, IEC 61508, 62061 and Machinery Directive 2006/42/EC and it will be a competitive advantage to do so.
Smm hamburg 2014 olaf
The document provides information about the SMM Hamburg 2014 exhibition including:
- Over 2,100 exhibitors from 62 countries and 50,000 visitors from around the world attended the 2012 exhibition.
- The 2014 exhibition will be held from September 9-12 and showcase ship engineering, shipbuilding, and maritime technology products and services.
- The document also includes details about Eaton Corporation's booth at the exhibition such as the location, graphics, and products they will feature related to electrical systems, automation and drives, filtration, and power distribution for ships.
Offshore cabling the hidden arteries of the wind industry
Underwater cables are crucial to offshore wind farms as they transport power from the wind turbines back to land, accounting for 10% of project costs. Faults in cables cause 70% of insurance claims, and repairing cables can be difficult work affected by weather. Experts say successful cable installation relies on thorough planning, engineering, and coordination between installers and developers from an early stage. A future European supergrid may help countries share renewable energy resources through interconnected offshore cabling networks.
Km06 pneumatic punching machine abstract (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
Volume ii feasability study tf
Feasibility Study Volume II of Low Cost Launch Vehicles Techn ology under Contract of the German Ministry of Research and Technology
Volume i feasability study tf
Feasibility Study I of Low Cost Satellite Launch Technology under Contract of the German Ministry of Research and Technology
Catalog kim thu sét Stormaster
This document provides technical specifications for LPI's Stormaster ESE air terminals and associated lightning protection products. It describes the Stormaster ESE terminals, which come in 15, 30, 50, and 60 microsecond versions. It also outlines components like mounting masts, guy wires, downconductors, and earthing/grounding systems. Installation diagrams are provided for different mounting configurations on buildings and towers. Product codes, materials, and dimensions are listed for ordering the various lightning protection parts.
Hướng dẫn lắp đặt kim thu sét Stormaster ESE
This document provides a technical data sheet for LPI's Stormaster ESE air terminals and lightning protection products. It describes the key features of the Stormaster ESE terminals, including that they are fully tested to compliance standards and have over 15 years of field experience. It also outlines the product range, which includes various terminals, masts, couplings, downconductors, and other installation components. Formulas are provided for calculating the protection radius based on the installed terminal model and height.
Präsentation 2017_E
IEM FörderTechnik GmbH is a company located in Kastl, Germany that specializes in material handling equipment. It provides consulting, engineering, manufacturing, and service for conveyor systems. The company serves various industries including environment, energy, raw materials, and nuclear technology. It has international customers and references in waste recycling plants, power stations, steel plants, and nuclear waste treatment facilities.
Airbus Defence Space uses EOS DMLS Additive Process for 3D Printing of Satell...
Airbus Defence Space uses EOS DMLS Additive Process for 3D Printing of Satell...Machine Tool Systems Inc.
Airbus Defence and Space used additive manufacturing to produce retaining brackets for telecommunication satellites. The 3D printed titanium brackets can withstand temperatures up to 330°C in space. This allowed for improved design of the brackets and reduced production costs by over 20% while also lowering the weight by around 300g per satellite. The new manufacturing process takes less than a month compared to over 5 days saved in assembly.PV-Solar System-Carports-2.500kwp
This document provides an offer for a 2,500 kWp photovoltaic system installed on carports. It includes planning, installation, commissioning and documentation of the solar panels, inverters, wiring, monitoring equipment, and carport structures. The scope of work covers delivery, assembly and wiring of all electrical and mounting components, as well as online monitoring access. Pricing for the solar equipment, installation work, and carports is available upon request.
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...Machine Tool Systems Inc.
Please find attached a case study about the production of probes for measuring speed and temperature in turbo engines. These probes have been invented by the Startup Vetoflow. The formation of the company was supported by the 3D Printing Cluster. A network which was founded by EOS, Strascheg Center for Entrepreneurship and UnternehmerTUM. Similar to v-plane DOA Services (20)
4th International Conference Drivetrain Concepts for Wind Turbines
4th International Conference Drivetrain Concepts for Wind Turbines
MTU Aerospace uses EOS DMLS for 3D Printing of Jet Engines
MTU Aerospace uses EOS DMLS for 3D Printing of Jet Engines
Offshore cabling the hidden arteries of the wind industry
Offshore cabling the hidden arteries of the wind industry
Km06 pneumatic punching machine abstract (wecompress)
Km06 pneumatic punching machine abstract (wecompress)
Airbus Defence Space uses EOS DMLS Additive Process for 3D Printing of Satell...
Airbus Defence Space uses EOS DMLS Additive Process for 3D Printing of Satell...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
EOS client, Startup Vetoflow, using DMLS to produce probes for measuring spee...
Recently uploaded
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Recently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
v-plane DOA Services
- 1. ... Because safety matters EASA.21J.323 STC and minor changes for large and small aircraft www.v-plane.com - Folie 1 -
- 2. EASA privileges „all changes to all aircraft“ CS 23, 25, 27, 29p incl. repairs EASA.21J.323 FAA approvals via bilateral agreement v-plane engineering GmbH, Theodorstr. 42-90, Haus 6a, 22761 Hamburg, v-plane.com, Tel.: +49 40 22634320, © 2014
- 3. 45 experts experienced in a/c projects from 1 to 400 seats øschke Stefan Benedikt engine helicopter Calin Gologan structures Albert Mylius aircraft layout Andreas Sattler finance Dr. Volker Kassera aerodynamics Karl Kä structu Icheler ring Klaus H. Fischer market Hans Mallwitz safety Dr. Harald Hoffman avionics Michael Kaste lightning Thoma airwort Claus Cordes conception EASA.21J.323 v-plane engineering GmbH, Theodorstr. 42-90, Haus 6a, 22761 Hamburg, v-plane.com, Tel.: +49 40 22634320, © 2014
- 4. services • STC and minor changes to all a/c • Major and minor repairs to all a/c • ETSO certification plans • DOA services, setup and support • POA services, setup & support v-plane engineering GmbH, Theodorstr. 42-90, Haus 6a, 22761 Hamburg, v-plane.com, Tel.: +49 40 22634320, © 2014
- 5. your first contacts Henryk Bork Language: de, en henryk.bork@ v-plane.com Bengt Sjödahl, language: en, sv bs@v-plane.com James J. Murray language: en, es, fr jjm@v-plane.com phone: +49 40 226 343 -20 v-plane engineering GmbH, Theodorstr. 42-90, Haus 6a, 22761 Hamburg, v-plane.com, Tel.: +49 40 22634320, © 2014
- 6. Aviation is a passion where success requires both knowledge and experience. Contact us and we will connect you. www.v-plane.com v-plane engineering GmbH Theodorstr. 42-90, Haus 6a D22761 Hamburg phone: +49 40 226 343 20 Web: www.v-plane.com ... because innovation matters v-plane engineering GmbH, Theodorstr. 42-90, Haus 6a, 22761 Hamburg, v-plane.com, Tel.: +49 40 22634320, © 2014