The document contains information about an engine model D6E, including:
- It is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- It uses a common rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions.
- The document provides details on engine components like the cylinder head, pistons, valves, fuel system and their functions.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and IEGR unit is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfrou774513po
The document contains information about an engine model D6E, including:
- It is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- It uses a common rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions.
- The document provides details on engine components like the cylinder head, cylinder block, pistons, valves and includes diagrams.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) Instructions are provided on adjusting the valve clearance and IEGR unit, which requires using special tools and rotating the crankshaft to specific positions.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document contains information about an engine model D6E, including:
- It is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- It uses a common rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions.
- The document provides details on engine components like the cylinder head, cylinder block, pistons, valves and includes diagrams.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) Instructions are provided on adjusting the valve clearance and IEGR unit, which requires using special tools and rotating the crankshaft to specific positions.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and IEGR unit is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfrou774513po
The document contains information about an engine model D6E, including:
- It is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- It uses a common rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions.
- The document provides details on engine components like the cylinder head, cylinder block, pistons, valves and includes diagrams.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) Instructions are provided on adjusting the valve clearance and IEGR unit, which requires using special tools and rotating the crankshaft to specific positions.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document contains information about an engine model D6E, including:
- It is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- It uses a common rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions.
- The document provides details on engine components like the cylinder head, cylinder block, pistons, valves and includes diagrams.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) The procedure for adjusting the valves and internal exhaust gas recirculation system is outlined in multiple steps involving the use of special tools.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) Instructions are provided on adjusting the valve clearance and IEGR unit, which requires using special tools and rotating the crankshaft to specific positions.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides technical specifications and descriptions for various engine components of the Volvo D7E engine. It describes the engine as a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It then provides details on the common rail fuel system, engine identification plate, tightening torques for engine components, location of engine components, and descriptions of the cylinder head, cylinder head gasket, cylinder block, cylinder liners, pistons, piston rings, and valves. Diagrams and figures accompany many of the sections.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on a Deutz D6D EOE2 engine, including:
- It is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head.
- Gears in the engine are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- Figures and descriptions are included to identify components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
1. The engine is a 6-cylinder 4-stroke diesel with a cast iron block and head, turbocharged and aftercooled.
2. It describes the cylinder head as made of grey cast iron with vertical air intake and horizontal exhaust on the same side.
3. The thickness of the cylinder head gasket determines the piston crown clearance which influences combustion, power, fuel consumption, and emissions.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
1. The engine is a 6-cylinder 4-stroke diesel with a cast iron block and head, turbocharged and aftercooled.
2. It describes the cylinder head as made of grey cast iron with vertical air intake and horizontal exhaust on the same side.
3. The thickness of the cylinder head gasket determines the piston crown clearance which influences combustion, power, fuel consumption, and emissions.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo L120G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for performing a compression test on an engine. It lists the required tools and outlines the steps to prepare the engine, which include removing components like the inlet pipe, exhaust pipe, diesel particulate filter, air cleaner, crankcase ventilation, and valve cover. The procedure notes to maintain cleanliness when working on the fuel system and plug all pipes and hoses when removing them.
Volvo L120F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for removing the engine on a Volvo machine. It outlines the steps to drain fluids, disconnect cables, and remove parts to access the engine. These include draining the engine oil, transmission oil, and hydraulic oil, disconnecting power and suppression cables, and removing fender panels and mudguards. Lifting tools such as slings and eyes are listed to lift the engine out once preparatory steps are complete.
Volvo L120E Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides information about removing a six-cylinder turbocharged diesel engine from a vehicle. It lists 24 steps for removal, including draining fluids, disconnecting electrical connections and hoses, removing covers and panels, and detaching mounting brackets. Lifting eyes and slings are used to lift the engine, which weighs approximately 760 kg. Photos illustrate some of the removal points, such as drain plugs, hoses, sensors, and mounting hardware.
Volvo L120C Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
- The document provides service information for engines and components, including specifications, maintenance procedures, and part numbers.
- It details that the L90C and L120C models are equipped with six-cylinder turbocharged diesel engines, the TD63KBE and TD73KDE respectively.
- The document includes specifications for engine type, output, torque, dimensions, oil capacities, tightening torques, weights and valve clearance settings.
Volvo L110G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides information on an engine and its components:
1) It describes the D8H engine, which is a 6-cylinder 4-stroke turbocharged diesel engine that meets Tier 4 interim emissions standards. It has a common rail fuel system and exhaust aftertreatment system.
2) It lists the engine's components and their locations, and provides diagrams of the component layout.
3) It describes the engine identification process and protection systems, which can limit engine speed/torque or shut it down if critical parameters are exceeded.
Volvo L110F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides information on removing the engine from a machine. It lists the necessary tools and parts, and outlines the steps to drain fluids, disconnect cables, and remove panels and guards. The engine is then ready to be lifted out after these preparatory tasks are completed.
More Related Content
Similar to Volvo FC2421C Excavator Service Repair Manual Instant Download.pdf
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides technical specifications and descriptions for various engine components of the Volvo D7E engine. It describes the engine as a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It then provides details on the common rail fuel system, engine identification plate, tightening torques for engine components, location of engine components, and descriptions of the cylinder head, cylinder head gasket, cylinder block, cylinder liners, pistons, piston rings, and valves. Diagrams and figures accompany many of the sections.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on a Deutz D6D EOE2 engine, including:
- It is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head.
- Gears in the engine are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- Figures and descriptions are included to identify components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
1. The engine is a 6-cylinder 4-stroke diesel with a cast iron block and head, turbocharged and aftercooled.
2. It describes the cylinder head as made of grey cast iron with vertical air intake and horizontal exhaust on the same side.
3. The thickness of the cylinder head gasket determines the piston crown clearance which influences combustion, power, fuel consumption, and emissions.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
1. The engine is a 6-cylinder 4-stroke diesel with a cast iron block and head, turbocharged and aftercooled.
2. It describes the cylinder head as made of grey cast iron with vertical air intake and horizontal exhaust on the same side.
3. The thickness of the cylinder head gasket determines the piston crown clearance which influences combustion, power, fuel consumption, and emissions.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Similar to Volvo FC2421C Excavator Service Repair Manual Instant Download.pdf (16)
Volvo L120G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for performing a compression test on an engine. It lists the required tools and outlines the steps to prepare the engine, which include removing components like the inlet pipe, exhaust pipe, diesel particulate filter, air cleaner, crankcase ventilation, and valve cover. The procedure notes to maintain cleanliness when working on the fuel system and plug all pipes and hoses when removing them.
Volvo L120F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for removing the engine on a Volvo machine. It outlines the steps to drain fluids, disconnect cables, and remove parts to access the engine. These include draining the engine oil, transmission oil, and hydraulic oil, disconnecting power and suppression cables, and removing fender panels and mudguards. Lifting tools such as slings and eyes are listed to lift the engine out once preparatory steps are complete.
Volvo L120E Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides information about removing a six-cylinder turbocharged diesel engine from a vehicle. It lists 24 steps for removal, including draining fluids, disconnecting electrical connections and hoses, removing covers and panels, and detaching mounting brackets. Lifting eyes and slings are used to lift the engine, which weighs approximately 760 kg. Photos illustrate some of the removal points, such as drain plugs, hoses, sensors, and mounting hardware.
Volvo L120C Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
- The document provides service information for engines and components, including specifications, maintenance procedures, and part numbers.
- It details that the L90C and L120C models are equipped with six-cylinder turbocharged diesel engines, the TD63KBE and TD73KDE respectively.
- The document includes specifications for engine type, output, torque, dimensions, oil capacities, tightening torques, weights and valve clearance settings.
Volvo L110G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides information on an engine and its components:
1) It describes the D8H engine, which is a 6-cylinder 4-stroke turbocharged diesel engine that meets Tier 4 interim emissions standards. It has a common rail fuel system and exhaust aftertreatment system.
2) It lists the engine's components and their locations, and provides diagrams of the component layout.
3) It describes the engine identification process and protection systems, which can limit engine speed/torque or shut it down if critical parameters are exceeded.
Volvo L110F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides information on removing the engine from a machine. It lists the necessary tools and parts, and outlines the steps to drain fluids, disconnect cables, and remove panels and guards. The engine is then ready to be lifted out after these preparatory tasks are completed.
Volvo L90G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides instructions for replacing the engine rotation speed sensor for the crankshaft and camshaft on a WLO L90G engine. The procedures include placing the machine in service position, removing components to access the sensors, unplugging connectors, loosening mounting screws, replacing the O-rings, installing new sensors and reinstalling components. Torque specifications are provided for reinstalling the oil pipe.
Volvo L90F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides information about the D6E engine, including:
- It is a straight six-cylinder turbocharged diesel engine with direct injection and intercooler.
- It uses Common Rail fuel injection controlled by an electronic control unit and features split injection and optimized air handling.
- The engine has various electronic functions to monitor components and reduce power or shut off the engine if critical issues arise to prevent damage.
Volvo L90D Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides specifications and service information for engines, including:
- The L90D is equipped with a TD63KBE engine and the L120D with a TD73KDE engine.
- Both engines are 6-cylinder 4-stroke turbocharged diesel engines with intercoolers.
- The engines have wet cylinder liners and separate cylinder heads covering 3 cylinders each.
- Lubrication is provided by a force-feed system and the turbocharger supplies pressurized air.
Volvo L90COR L90C OR Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides service information for engines used in L90C and L120C machines, including:
- The L90C is equipped with a TD63KBE engine and the L120C with a TD73KDE engine, both are six-cylinder turbocharged diesel engines.
- Instructions are provided for installing and removing the engine, including lifting points, disconnecting hoses and electrical connections, and draining fluids.
- Specifications include engine details, tightening torques, weights, capacities, and valve clearance specifications.
- A procedure is outlined for adjusting the valves, which involves removing the valve covers and rotating the crankshaft to bring each valve to the adjustment position.
Volvo L90C Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides specifications and service information for engines used in Volvo machines. It details that the L90C and L120C models are equipped with six-cylinder TD63KBE and TD73KDE diesel engines respectively. Both engines are turbocharged and low-emission. The document also provides engine specifications such as displacement, power output, torque values, valve adjustment procedures and more.
Volvo L70G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides instructions for replacing the engine rotation speed sensor for the crankshaft and camshaft on a WLO L70G machine. The procedures include placing the machine in service position, removing components to access the sensors, unplugging connectors, loosening mounting screws, replacing the O-rings, installing new sensors and reinstalling any removed components. Tests are recommended after replacement to check proper functioning of the new sensors.
Volvo L70F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides information about the D6E engine, including:
- It is a straight six-cylinder turbocharged diesel engine with direct injection and intercooler.
- It uses Common Rail fuel injection controlled by an electronic control unit and features split injection and optimized air handling to reduce emissions.
- The engine has software protections that monitor components, warn the operator, and limit engine speed/torque if issues arise to prevent damage.
- It also describes functions like increased engine speed mode and automatic engine shutdown that are controlled by the software.
Volvo L70D Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for removing and installing an engine. Key steps for removal include draining fluids, disconnecting electrical and hydraulic connections, removing accessories attached to the engine like the air cleaner and hood, and lifting the engine out once detached from the frame using a jack and lifting device. Installation involves reversing these steps, making all relevant connections to reattach the engine, and refilling fluids before testing operation. Precautions are outlined to avoid damage to components like the air conditioning system during removal and installation work.
Volvo L60G Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides instructions for replacing the engine rotation speed sensor for the crankshaft and camshaft on a WLO L60G machine. The procedures include placing the machine in service position, removing components to access the sensors, unplugging connectors, loosening mounting screws, replacing the O-rings, installing new sensors and reconnecting connectors, and restoring the machine.
Volvo L60F Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides service information for removing an engine from a machine. It outlines the steps to drain fluids, disconnect hoses and electrical connections, and remove covers and panels to access the engine. Lifting tools are listed to lift the engine out once it is prepared and disconnected from the machine. The summary removes non-essential details and focuses on the key steps and purpose of the document.
Volvo L40B Compact Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides information on engine descriptions and service procedures for various components of DEUTZ and VOLVO diesel engines, including:
- The engines are four cylinder, four stroke engines with direct injection and turbocharging.
- Compression tests should yield results between 3-3.8 MPa across cylinders.
- The cylinder head is made of cast iron with vertical inlet and horizontal exhaust on the same side.
- Valves are adjusted using a rotation tool to specified clearances, checking with a feeler gauge.
- The timing gears are located at the flywheel end for the camshaft and power take-off, with stamped markings to set timing.
Volvo L35B Compact Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information about engines that are equipped on various machine models, including the Deutz-BF4L 1011 FT engine and Volvo D3D and D3.6D engines. It describes the engine components and systems, as well as procedures for removing and installing the engine.
Volvo L30B Compact Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
The document provides service information for removing and installing an engine. It describes the steps to remove components like the counterweight, hydraulic pump, fuel lines and exhaust pipe. It then outlines the reverse process to install the engine, connecting all components back in place like the electrical connections, fuel lines, exhaust and mounting the engine brackets. Special attention is required when handling heavy components.
Volvo L25F Compact Wheel Loader Service Repair Manual Instant Download.pdfrou774513po
This document provides instructions for removing and installing an engine. It describes disconnecting fuel lines, electrical connections, removing mounting brackets, and lifting the engine out of the machine using hoisting equipment. The installation instructions describe lowering the engine back into place and reconnecting all lines, brackets and electrical connections in the reverse order of removal. Safety precautions are noted including the risk of crushing injuries when handling heavy components.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Volvo FC2421C Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Engine, description
D6E - tier 3 compliant
The D6E configuration is a four stroke, straight six cylinder, turbocharged, direct injected diesel engine with charge air
cooling and wet, replaceable cylinder liners.
The D6E engine uses a Common Rail Fuel System controlled by the engine electronic control (E-ECU) software.
Electronically controlled IEGR (Internal Exhaust Gas Recirculation) reduces NO formation and lowers emissions without the
need for exhaust after treatment. Volvo's latest engine management system, E-ECU is used to control all engine electronic
functions.
The cylinders are numbered consecutively beginning at the flywheel end. Engine rotational direction is counterclockwise as
seen from the flywheel end.
Figure 1
Engine, D6E
2. Service Information
Document Title: Function Group: Information Type: Date:
Engine, identification 200 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Engine, identification
Identification plate
The engine model, serial number and performance data are stamped on an identification plate which is attached on the
cylinder head cover. The engine model designation and serial number must be indicated when ordering spare parts.
Figure 1
Engine identification, D6E
3. Service Information
Document Title: Function Group: Information Type: Date:
Engine, tightening torques 200 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Engine, tightening torques
NOTICE
Regarding bolted joints which are not listed here, see “Volvo standard tightening torques”
Engine, tightening torque
Rocker arm bracket on cylinder head 30 Nm (22.2 lbf ft)
Cylinder head cover (M6) on cylinder head 13 Nm (9.6 lbf ft)
Exhaust return module on cylinder head Step 1: 10 Nm (7.4 lbf ft)
Step 2: 30 Nm (22.2 lbf ft)
Lock nut, valve adjusting screw 20 ±2 Nm (14.8 ±1.5 lbf ft)
Locking screw on cylinder head 34 Nm (25.2 lbf ft)
Solenoid valve on cylinder head 24 Nm (17.8 lbf ft)
Front cover on crankcase Step 1: 3 Nm (2.2 lbf ft)
Step 2: 21 Nm (15.5 lbf ft)
Drain plug on oil pan, M18 55 Nm (40.7 lbf ft)
Crankcase ventilation on cylinder head 21 Nm (15.5 lbf ft)
Return line to return stop valve 30 Nm (22.2 lbf ft)
Return stop valve to crankcase 80 Nm (59.2 lbf ft)
Impulse transmitter (crankshaft) on holder on front cover 9 Nm (6.7 lbf ft)
Impulse transmitter (camshaft) on gearcase 9 Nm (6.7 lbf ft)
Turbocharger on exhaust manifold 42 Nm (31.1 lbf ft)
Clamping shoe injector on cylinder head 16 Nm (11.8 lbf ft)
Injection lines on rail and injector, high pressure line on high-pressure
pump
25 Nm (18.5 lbf ft)
Fuel supply pump on holder 22 Nm (16.3 lbf ft)
Holder fuel supply pump on holder 30 Nm (22.2 lbf ft)
V-belt pulley on fuel supply pump 27 Nm (20.0 lbf ft)
High pressure pump on crankcase, M10 Step 1: 10 Nm (7.4 lbf ft)
Step 2: 50 Nm (37.0 lbf ft)
Fuel control valve 30 Nm (22.2 lbf ft)
Fuel pipe on high pressure pump 29 Nm (21.5 lbf ft)
Fuel pipe on control block 39 Nm (28.9 lbf ft)
Rail on cylinder head 30 Nm (22.2 lbf ft)
Pressure relief valve on rail 100 Nm (74.0 lbf ft)
Rail pressure sensor on rail 70 Nm (51.8 lbf ft)
Pipe clips, fuel line fastening 30 Nm (22.2 lbf ft)
Fuel line on control block, fuel filter console and rail 39 Nm (28.9 lbf ft)
Fuel pipe (return) on control block 49 Nm (36.3 lbf ft)
Fuel pipe (return) on cylinder head 29 Nm (21.5 lbf ft)
Fuel line on fuel filter8 39 Nm (28.9 lbf ft)
Fuel filter console/radiator tank on crankcase 30 Nm (22.2 lbf ft)
5. Service Information
Document Title: Function Group: Information Type: Date:
Component locations 200 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Component locations
Component position, engine D6E. The following figures show the position of a number of components on engine D6E.
Figure 1
Component locations, front side
1 Engine oil filler 11 Oil dipstick
2 Air inlet 12 Power take off
3 Transport eye 13 Engine oil filter
4 Alternator 14 Connection to E-ECU
5 Fuel feed pump 15 Fuel filter
6 V-rib belt drive on crankshaft 16 Crankcase bleeding valve
7 V-rib belt 17 High pressure fuel pump
8 Automatic belt tensioner 18 Common rail
9 Coolant pump 19 Injector
10 Engine oil cooler
6. Figure 2
Component locations, flywheel side
21 Crankcase bleeding valve 28 Turbocharger
22 Charge air manifold 29 Coolant inlet
23 Flywheel housing 30 Air outlet (to charge air cooler)
24 Drain plug 31 Coolant outlet
25 Oil pan 32 Air inlet (from charge air cooler)
26 Starter motor 33 Exhaust manifold
27 Oil return line from turbocharger 34 Cylinder rocker arm cover
7. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Cylinder head, description
The cylinder head is made of grey cast iron and is common for all cylinders. The induction air enters vertically (A) and the
exhausts leave horizontally (B). Inlets and exhaust outlets are located on the same side of the cylinder block. Inlet and
exhaust valve size is increased to optimize the gas exchange and combustion process. Valve guides are replaceable. Coolant
flow in the cylinder head is modified to accommodate an outlet controlled cooling system.
On order for the engine to fulfill governing emission standards, there are 3 cylinder head gaskets of different thicknesses
between the cylinder head and the piston.
Figure 1
8. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head gasket,
description
211 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Cylinder head gasket, description
The cylinder head gasket is a multi layered gasket with 1, 2 or 3 identification holes to indicate three different thicknesses
available. Selection of the proper thickness of gasket is determined by the measurement of piston projection above the
cylinder block sealing surface. Recalibration for the correct gasket thickness would be required if new pistons or a new
cylinder block were installed.
Figure 1
1. Cylinder head gasket, marking
9. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder block, description 212 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Cylinder block, description
The cylinder block is cast in one piece and has wet, replaceable cylinder linings. Combustion pressure tensile breaking
strength in cylinder head screws is led through stiffened sections of the cylinder block wall directly to the main bearings.
The cylinder block surface should not be ground as the distance between the pistons and the valve heads may become too
small. There is also a risk that injector tips will be incorrectly placed in relation to the pistons and that exhaust values will
worsen.
10. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder, description 213 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Cylinder, description
Figure 1
Cylinder liner
1 Cylinder liner
2 Crankcase
3 Liner projection: 0.07 - 0.12 mm
D6E engine with a bore about 98 mm (3.86 in) is provided with dry, plateau-honed slip-fit cylinder liners. In case of damage,
the cylinders of the D6E series are repaired by replacing the slip-fit liners.
11. Service Information
Document Title: Function Group: Information Type: Date:
Pistons, description 213 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Pistons, description
D6E Engine
The pistons are made of special alloy aluminium. The piston's combustion compartment has a somewhat off-center
(eccentric) position in relation to the piston pin.
The pistons are provided with 3 piston rings. The first ring has a ring carrier made of cast iron.
The piston is cooled with oil sprayed up on the inside of the piston top.
The piston cooling nozzles are made of plastic and are mounted in the cylinder head by the main bearing positions.
The first piston ring has an asymmetric cross-section area (A). The cross-section area for piston ring number two
(compression ring) is tapered. When installing the piston rings, the marking TOP by the opening in the rings must face up.
The third ring is an oil ring with bevelled edge.
Figure 1
12. Service Information
Document Title: Function Group: Information Type: Date:
Piston rings, description 213 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Piston rings, description
Each piston is equipped with two compression rings and one oil ring. The uppermost compression ring is of the "Keystone"
type (dual trapezoid-formed cross section). Compressions rings should be placed with the text facing upwards.
The oil ring is equipped with two scraping edges, which are pressed against the cylinder wall using the spring tension in the
ring and an expander spring placed on the inside of the ring. The oil ring can be placed on either side but should be placed
with expander spring and oil ring openings 180° from one another.
Figure 1
13. Service Information
Document Title: Function Group: Information Type: Date:
Valves, description 214 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Valves, description
The engines are equipped with one inlet and one exhaust valve per cylinder.
At the upper end of the valve guide, there is an O-ring seal (A) against the valve spindle to prevent major oil consumption
and to reduce the amount of hydrocarbons in the exhausts.
The valves are rotated by the eccentric action of the rocker arms.
The new compressed tapered shape enables the valves to turn easily despite loading.
Rocker arm lubrication is part of the engine force-feed lubrication system. The oil is supplied via the tappets and push rods.
If the valve guides are replaced, they are obtained in another version (B) to facilitate installation.
Figure 1 shows a valve guide installed in production and figure 2 shows a replacement guide.
Figure 1
14. Service Information
Document Title: Function Group: Information Type: Date:
Valves, adjusting 214 Service Information 2014/9/11
Profile:
EXC, FC2421C [GB]
Valves, adjusting
Op nbr 214-012
9998681 Rotation tool
885812 Timing tool
WARNING
Risk of burns - stop the diesel engine and allow it to cool down before starting any work.
1. Place the machine in service position B. See 091 Service positions
2. Open the engine hood and right side cover.
3. Remove turbocharger inlet hose clamping screws (1), coolant air ventilation hose clamping screw (2) and bracket
mounting screws (3).
Figure 1
4. Remove cover plate (1).
15. Figure 2
5. Remove screws (arrows) and remove crankcase ventilation duct (1).
Figure 3
6. Remove rocker arm valve cover (1) with the gasket.
Figure 4
7. Remove the camshaft gear cover and install turning gear (1).
NOTE!
The teeth of the turning gear must mesh fully with the teeth of the camshaft gear.
Figure 5
16. 8. Remove the IEGR unit.
Install M 8 x 75 mm – 10.9 screws in the holes for the IEGR unit on the rocker arm holders.
Figure 6
9. Setting engine to valve overlap
Turn crankshaft using the turning gear until the valve overlap of cylinder 1 is reached.
Figure 7
Overlapping means that the exhaust valve is about to open and the inlet valve is about to close. It should not be
possible to rotate any push rods by hand for the cylinder in question in this position.
Figure 8
Overlapping
17. Figure 9
1, 3, 5, 7, 9 and 11 are exhaust valves
2, 4, 6, 8, 10 and 12 are inlet valves
10. Adjust the valve clearance for each cylinder according to the black markings in the figure. Procedure for adjusting:
Figure 10
Figure 11
1.
2.
885812 Timing tool
Adjusting screw
1.
2.
3.
4.
5.
Loosen the adjusting screw's lock bolt on the rocker arm.
Install the protractor on the adjusting screw.
Turn the adjusting screw until zero clearance is obtained between rocker arm and valve. Reset the
protractor to zero.
Turn the adjusting screw counterclockwise 75° for inlet valve and 120° for exhaust valve.
Hold the adjusting screw and tighten the lock nut at the same time. Tightening torque: see
200 Engine, tightening torques
11. Rotate the crankshaft another full turn until the valves for cylinder 6 overlap. Adjust the valve clearance for each
cylinder according to the black markings in the figure.
NOTE!
When all valves are adjusted, do not rotate the engine. Continue directly with installing and adjusting the IEGR unit.
18. Figure 12
Installing and adjusting IEGR unit
12. Change the O-rings on the pipe between the two IEGR sections. Lubricate the O-rings.
13. Remove the replacement bolts from the IEGR unit's installation holes.
14. Install the IEGR unit.
15. With overlapping valves for cylinder 6, adjust IEGR-opening piston for cylinder 1, 3 and 5. Procedure for adjusting
IEGR-opening piston:
Figure 13
1.
2.
885812 Timing tool
Adjusting screw
1.
2.
3.
4.
5.
Loosen the adjusting screw's lock bolt on the IEGR unit.
Install the protractor on the adjusting screw.
Turn the adjusting screw until zero clearance is obtained between the IEGR-opening piston and exhaust
rocker arm. Reset the protractor to zero.
Turn the adjusting screw counterclockwise 144°.
Hold the adjusting screw and tighten the lock nut at the same time. Tightening torque: see
200 Engine, tightening torques
16. Rotate the crankshaft another full turn until the valves for cylinder 1 overlap. Adjust IEGR-opening piston for
19. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
20. cylinder 2, 4 and 6.
17. Install the new gasket on the valve cover.
NOTE!
Make sure that the tab (1) on the gasket is positioned correctly.
Figure 14
Assembly
18. For assembly, reverse disassembly procedure.
NOTE!
Do not reuse the O-rings and gasket.
19. After the completion of the work, start the engine and check for leaks and operating condition.