This document contains a device modeling report for a shunt regulator component. It includes:
1) The SPICE model for the AN1431T shunt regulator from Panasonic, including component values and descriptions.
2) Simulation results showing the reference voltage is accurately modeled as 2.5V under different load currents.
3) The dynamic impedance is also closely matched between simulation and measurement.
4) Graphs of the output characteristic and internal diode references are included for comparison against measurements.
This document is a floor plan showing the layout and electrical details of the first floor of a building. It includes labels for various rooms of the floor plan like units, lobbies, restrooms, mechanical and electrical rooms. It also provides enlarged detail views of the electrical, telecom and theater rooms. The document includes the project number, architect information, copyright notice and scale of the drawings.
This document contains a wiring diagram for a vehicle diagnostic system. It lists various components and sensors, and shows their connections via labeled wires. These include things like glow plugs, injectors, temperature and pressure sensors, and diesel exhaust fluid components. The diagram connects these components to control modules like the ECM via various gauges of wire.
The document is an inventory update from Spice Park in April 2018. It summarizes that the total number of parts in Spice Park inventory is 4,818, which is an increase of 26 parts from the previous month. The bulk of the inventory consists of semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It also provides a breakdown of manufacturers for insulated-gate bipolar transistors (IGBTs) in the inventory.
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
The document describes a Spice Park, which is a collection of electronic components organized by category. It provides a breakdown of the Spice Park by component type, showing that semiconductors make up 75% of the total 4,941 pieces. It then lists numerous semiconductor part numbers, descriptions and manufacturers. Updates to the Spice Park total are provided monthly.
Used SMT & PTH &ATE assembly equipment inventoryEmily Tan
Used SMT & PTH &ATE assembly equipment inventory:Pls eamil us for the availability of the Used SMT & PTH &ATE assembly equipment. Appreciate your time!
This document contains information on piping and instrumentation diagrams (P&IDs), process area instrument plans, and instrument loop diagrams for a product distribution system. It lists 16 diagrams and plans, including P&IDs for specific tanks, heaters, and pumps. It also provides details on the type, ordered date, received date, and approval dates for each diagram/plan. The diagrams and plans are related to instrumentation for a product distribution system and its associated equipment.
This document contains a device modeling report for a shunt regulator component. It includes:
1) The SPICE model for the AN1431T shunt regulator from Panasonic, including component values and descriptions.
2) Simulation results showing the reference voltage is accurately modeled as 2.5V under different load currents.
3) The dynamic impedance is also closely matched between simulation and measurement.
4) Graphs of the output characteristic and internal diode references are included for comparison against measurements.
This document is a floor plan showing the layout and electrical details of the first floor of a building. It includes labels for various rooms of the floor plan like units, lobbies, restrooms, mechanical and electrical rooms. It also provides enlarged detail views of the electrical, telecom and theater rooms. The document includes the project number, architect information, copyright notice and scale of the drawings.
This document contains a wiring diagram for a vehicle diagnostic system. It lists various components and sensors, and shows their connections via labeled wires. These include things like glow plugs, injectors, temperature and pressure sensors, and diesel exhaust fluid components. The diagram connects these components to control modules like the ECM via various gauges of wire.
The document is an inventory update from Spice Park in April 2018. It summarizes that the total number of parts in Spice Park inventory is 4,818, which is an increase of 26 parts from the previous month. The bulk of the inventory consists of semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It also provides a breakdown of manufacturers for insulated-gate bipolar transistors (IGBTs) in the inventory.
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
The document describes a Spice Park, which is a collection of electronic components organized by category. It provides a breakdown of the Spice Park by component type, showing that semiconductors make up 75% of the total 4,941 pieces. It then lists numerous semiconductor part numbers, descriptions and manufacturers. Updates to the Spice Park total are provided monthly.
Used SMT & PTH &ATE assembly equipment inventoryEmily Tan
Used SMT & PTH &ATE assembly equipment inventory:Pls eamil us for the availability of the Used SMT & PTH &ATE assembly equipment. Appreciate your time!
This document contains information on piping and instrumentation diagrams (P&IDs), process area instrument plans, and instrument loop diagrams for a product distribution system. It lists 16 diagrams and plans, including P&IDs for specific tanks, heaters, and pumps. It also provides details on the type, ordered date, received date, and approval dates for each diagram/plan. The diagrams and plans are related to instrumentation for a product distribution system and its associated equipment.
The document describes Arif Al-Nahdi Company, which manufactures fire pump systems in Saudi Arabia. It provides details on their pump package models including the EDJ, EJ, and DJ models. It describes the components that make up the pump packages including end suction pumps, electric motors, diesel engines, vertical jockey pumps, and fire pump controllers. Specifications are provided for dimensions, flow rates, pressures, motor sizes, and other technical details of the standard pump package configurations.
The document is a price list from Flomatic Corporation that highlights several new products, including:
1) Model 80E-VFD check valves designed for use with variable frequency drive pumps to minimize flow losses and hydraulic shocks.
2) Model 888S6/888S6R stainless steel wafer style check valves available in 2"-8" sizes.
3) Model 82DI-VFD check valves with male x male threads for connecting pumps to pipes in 2 1/2", 4", and 5" sizes.
This document provides information on general purpose rectifier diodes in Spice Park's inventory in January 2019. It contains a table listing 14 manufacturers that provide 441 total diodes. The majority are from Toshiba (135 diodes) and INTERSIL (118 diodes). For each diode part number, details are given on the manufacturer, model type, thermal characteristics, and last update date.
The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
Bobcat service code-list-2111111111111111111111111111111101026.pdfZsoltRacz
Diagnostic Service Codes are used by machine controllers to indicate potential fault conditions on machines. Codes occur when values fall outside an acceptable range. This document provides a list of codes for different Bobcat products, what component they relate to, and a brief description. It instructs users to search the code within the document to find the specific product and details.
Diagnostic Service Codes are used by machine controllers to indicate fault conditions on various machines. Codes occur when sensor values fall outside acceptable ranges. This document provides a list of codes for different Bobcat machines along with brief descriptions of what each code indicates. It includes codes for loaders, excavators, telehandlers, compact wheel loaders, and attachments. The document provides instructions for using control-F to search for specific codes.
LeanValueStreamOrg-wKanban-FeketeIstvanPicIstvan Fekete
This document describes the transformation of a production process from a traditional job shop layout with isolated production lines to a lean value stream organization with Kanban-driven operations. The original process involved separated and isolated production steps with extensive work-in-process movement between them. The new process implemented continuous flow production, organized production lines into value streams, reduced work-in-process inventory, and implemented Kanban signals to pull production through the process.
The document describes a Spice Park product database that is regularly updated. It contains details of 4,930 parts across various categories as of the November 2018 update. The bulk of the parts are semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It then provides a more detailed breakdown of the 430 general purpose rectifier diodes in the semiconductor category.
The document is a parts catalog for a 21-B crawler tractor. It provides information on identifying the model and serial numbers of the tractor and its components. It also includes an alphabetical index of parts listed in the catalog, with the part name and number. The document emphasizes the importance of providing the correct model and serial number when ordering parts to ensure the right parts are supplied.
Best Quality kitz valves distributors In Mumbaiconcordevalves
This document is a catalog from Kitz Valves listing their various valve products. Kitz Valves is a leading manufacturer of valves and other fluid control devices, producing products for applications ranging from homes to industrial processes. The catalog provides an overview of Kitz's extensive product lineup and materials including ball valves, actuated valves, butterfly valves, and more made from carbon steel, stainless steel, ductile iron, cast iron, bronze, and brass. It also lists their major production locations around the world.
This document is a catalog from Sterling Plumbing that showcases their bathroom and kitchen products. It includes sections on toilets, bathroom sinks, bathing and showering products, bath and shower doors, kitchen sinks, ADA compliant products, and warranty information. Sterling products are designed to be durable, easy to clean, and handle the realities of daily use in bathrooms and kitchens. They encourage connecting on social media or downloading their app for more inspiration.
Toyota 62 5fd23 forklift service repair manualfjsekdemmd
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series. It covers the models produced between August 1986 and August 1989, as well as models after September 1989 that underwent minor changes. The manual is intended to provide technicians with information to correctly service the corresponding forklift models. It also lists reference manuals for the mounted engines.
Worldwide Power Products sells new and used industrial diesel engines from Caterpillar. The document lists specifications for eight Caterpillar engines including models 3512C HD, 3512B, 3412 DIT, 3406C, C9, and 3304 that vary in horsepower from 135HP to 2500HP. The engines can be used for land-based, petroleum, and marine applications. Contact information is provided to obtain more details on the engines for sale.
Semiconductor equipment parts in stock march 2020 part 2Emily Tan
The document contains a list of over 12,000 part numbers. The parts are from a variety of manufacturers including Cisco Systems, CKD, Clippard, Cole Parmer, Comdel, Compaq, Compumotor, Computer Products, Condor, Connector, Control Panel, Controller, and more. The parts listed are available for sale through the company at the provided email address.
The document is an inventory report from Spice Park, a component stockpile, dated January 2018. It contains details of 4,792 electronic parts across various categories such as semiconductors, passive parts, batteries, and mechanical parts. Semiconductors make up 75% of the total parts. The report includes an breakdown of the semiconductor parts with over 400 general purpose diodes from manufacturers like Fairchild, ROHM, and Toshiba. It also notes that 10 additional Schottky rectifier diodes were added in the January 2018 update.
MARSHAL EXCELSIOR (USA) Safety Valves for LPG Tanks (For Seminar in Pakistan)ExcelIndustrialServi1
Excel Industrial Services (Pakistan) in Association with Marshal Excelsior (USA) Present this Technical Presentation on LPG Tanks Safeties and MEC products in "LPG Tank Manufacturers Joint Session" In Lahore 02 September, 2021
Brief about products of Marshal Excelsior and their quality, performance, efficiency, reliability and most important safety features!
For any query please feel free to contact us
Flojet water pump systems for Caravan RVRimsky Cheng
This document provides an overview of various recreational vehicle pumps and accessories from Flojet, Jabsco, and Rule. It describes water system pumps, toilets, macerator pumps, accessories like strainers and regulators, remote control lights, oil drain pumps, sealants, and care products. The document emphasizes Flojet's broad product line and worldwide sales and manufacturing presence to serve the recreational vehicle market.
The document provides an inventory update of Spice Park in April 2018. It details that the total number of parts in Spice Park as of April 2018 is 4,818 parts, up from 4,792 parts in January 2018. The majority of parts (75%) are semiconductors. The document then lists semiconductor part numbers and manufacturers in the inventory.
Dearborn Protocol Adapter 5 for Trucks,Trailers,Buses and Light Commercial Ve...Jack Chen
Dearborn Protocol Adapter 5 is designed to help manufacturers diagnostic the fault of trucks, trailers, buses and light commercial vehicles.It covers multiple systems and widely used, it's user friendly.Dearborn Protocol Adapter 5 is an proferssinal tool for the maintenance of the commercial vehicle manufacturers.
Toyota 5 fbc20 battery forklift service repair manualfhsjejkdmem
This document provides an overview of service procedures for the Toyota Battery Forklift 5FBC13-30 Series. It contains information on vehicle models, frame numbers, how to read the manual, terminology, abbreviations, operational tips, and the circuit tester. The manual covers exterior views, recommended lubricants and capacities, lubrication charts, periodic maintenance schedules, and the periodic replacement of parts and lubricants. Technicians should use this manual for providing quick and correct servicing of the corresponding forklift models.
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
The document describes Arif Al-Nahdi Company, which manufactures fire pump systems in Saudi Arabia. It provides details on their pump package models including the EDJ, EJ, and DJ models. It describes the components that make up the pump packages including end suction pumps, electric motors, diesel engines, vertical jockey pumps, and fire pump controllers. Specifications are provided for dimensions, flow rates, pressures, motor sizes, and other technical details of the standard pump package configurations.
The document is a price list from Flomatic Corporation that highlights several new products, including:
1) Model 80E-VFD check valves designed for use with variable frequency drive pumps to minimize flow losses and hydraulic shocks.
2) Model 888S6/888S6R stainless steel wafer style check valves available in 2"-8" sizes.
3) Model 82DI-VFD check valves with male x male threads for connecting pumps to pipes in 2 1/2", 4", and 5" sizes.
This document provides information on general purpose rectifier diodes in Spice Park's inventory in January 2019. It contains a table listing 14 manufacturers that provide 441 total diodes. The majority are from Toshiba (135 diodes) and INTERSIL (118 diodes). For each diode part number, details are given on the manufacturer, model type, thermal characteristics, and last update date.
The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
Bobcat service code-list-2111111111111111111111111111111101026.pdfZsoltRacz
Diagnostic Service Codes are used by machine controllers to indicate potential fault conditions on machines. Codes occur when values fall outside an acceptable range. This document provides a list of codes for different Bobcat products, what component they relate to, and a brief description. It instructs users to search the code within the document to find the specific product and details.
Diagnostic Service Codes are used by machine controllers to indicate fault conditions on various machines. Codes occur when sensor values fall outside acceptable ranges. This document provides a list of codes for different Bobcat machines along with brief descriptions of what each code indicates. It includes codes for loaders, excavators, telehandlers, compact wheel loaders, and attachments. The document provides instructions for using control-F to search for specific codes.
LeanValueStreamOrg-wKanban-FeketeIstvanPicIstvan Fekete
This document describes the transformation of a production process from a traditional job shop layout with isolated production lines to a lean value stream organization with Kanban-driven operations. The original process involved separated and isolated production steps with extensive work-in-process movement between them. The new process implemented continuous flow production, organized production lines into value streams, reduced work-in-process inventory, and implemented Kanban signals to pull production through the process.
The document describes a Spice Park product database that is regularly updated. It contains details of 4,930 parts across various categories as of the November 2018 update. The bulk of the parts are semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It then provides a more detailed breakdown of the 430 general purpose rectifier diodes in the semiconductor category.
The document is a parts catalog for a 21-B crawler tractor. It provides information on identifying the model and serial numbers of the tractor and its components. It also includes an alphabetical index of parts listed in the catalog, with the part name and number. The document emphasizes the importance of providing the correct model and serial number when ordering parts to ensure the right parts are supplied.
Best Quality kitz valves distributors In Mumbaiconcordevalves
This document is a catalog from Kitz Valves listing their various valve products. Kitz Valves is a leading manufacturer of valves and other fluid control devices, producing products for applications ranging from homes to industrial processes. The catalog provides an overview of Kitz's extensive product lineup and materials including ball valves, actuated valves, butterfly valves, and more made from carbon steel, stainless steel, ductile iron, cast iron, bronze, and brass. It also lists their major production locations around the world.
This document is a catalog from Sterling Plumbing that showcases their bathroom and kitchen products. It includes sections on toilets, bathroom sinks, bathing and showering products, bath and shower doors, kitchen sinks, ADA compliant products, and warranty information. Sterling products are designed to be durable, easy to clean, and handle the realities of daily use in bathrooms and kitchens. They encourage connecting on social media or downloading their app for more inspiration.
Toyota 62 5fd23 forklift service repair manualfjsekdemmd
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series. It covers the models produced between August 1986 and August 1989, as well as models after September 1989 that underwent minor changes. The manual is intended to provide technicians with information to correctly service the corresponding forklift models. It also lists reference manuals for the mounted engines.
Worldwide Power Products sells new and used industrial diesel engines from Caterpillar. The document lists specifications for eight Caterpillar engines including models 3512C HD, 3512B, 3412 DIT, 3406C, C9, and 3304 that vary in horsepower from 135HP to 2500HP. The engines can be used for land-based, petroleum, and marine applications. Contact information is provided to obtain more details on the engines for sale.
Semiconductor equipment parts in stock march 2020 part 2Emily Tan
The document contains a list of over 12,000 part numbers. The parts are from a variety of manufacturers including Cisco Systems, CKD, Clippard, Cole Parmer, Comdel, Compaq, Compumotor, Computer Products, Condor, Connector, Control Panel, Controller, and more. The parts listed are available for sale through the company at the provided email address.
The document is an inventory report from Spice Park, a component stockpile, dated January 2018. It contains details of 4,792 electronic parts across various categories such as semiconductors, passive parts, batteries, and mechanical parts. Semiconductors make up 75% of the total parts. The report includes an breakdown of the semiconductor parts with over 400 general purpose diodes from manufacturers like Fairchild, ROHM, and Toshiba. It also notes that 10 additional Schottky rectifier diodes were added in the January 2018 update.
MARSHAL EXCELSIOR (USA) Safety Valves for LPG Tanks (For Seminar in Pakistan)ExcelIndustrialServi1
Excel Industrial Services (Pakistan) in Association with Marshal Excelsior (USA) Present this Technical Presentation on LPG Tanks Safeties and MEC products in "LPG Tank Manufacturers Joint Session" In Lahore 02 September, 2021
Brief about products of Marshal Excelsior and their quality, performance, efficiency, reliability and most important safety features!
For any query please feel free to contact us
Flojet water pump systems for Caravan RVRimsky Cheng
This document provides an overview of various recreational vehicle pumps and accessories from Flojet, Jabsco, and Rule. It describes water system pumps, toilets, macerator pumps, accessories like strainers and regulators, remote control lights, oil drain pumps, sealants, and care products. The document emphasizes Flojet's broad product line and worldwide sales and manufacturing presence to serve the recreational vehicle market.
The document provides an inventory update of Spice Park in April 2018. It details that the total number of parts in Spice Park as of April 2018 is 4,818 parts, up from 4,792 parts in January 2018. The majority of parts (75%) are semiconductors. The document then lists semiconductor part numbers and manufacturers in the inventory.
Dearborn Protocol Adapter 5 for Trucks,Trailers,Buses and Light Commercial Ve...Jack Chen
Dearborn Protocol Adapter 5 is designed to help manufacturers diagnostic the fault of trucks, trailers, buses and light commercial vehicles.It covers multiple systems and widely used, it's user friendly.Dearborn Protocol Adapter 5 is an proferssinal tool for the maintenance of the commercial vehicle manufacturers.
Toyota 5 fbc20 battery forklift service repair manualfhsjejkdmem
This document provides an overview of service procedures for the Toyota Battery Forklift 5FBC13-30 Series. It contains information on vehicle models, frame numbers, how to read the manual, terminology, abbreviations, operational tips, and the circuit tester. The manual covers exterior views, recommended lubricants and capacities, lubrication charts, periodic maintenance schedules, and the periodic replacement of parts and lubricants. Technicians should use this manual for providing quick and correct servicing of the corresponding forklift models.
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
The document lists various types of semiconductor fabrication equipment including:
- Plasma etchers such as the Applied Materials Plasma II and Lam AutoEtch 590.
- Thin film deposition equipment such as the AMAT AMP-3300 PECVD and Emscope SC-650 Series.
- Mask aligners including the Canon PLA-501 F and Neutronix PLA 500/501.
- Wet benches, plasma ashers, chillers, ovens, rapid thermal processing equipment, coat/develop/bake tools, metrology systems, and miscellaneous parts.
The document lists various used plasma etch, stripper, and asher equipment for sale from Semistar Corp., ranging in price from $9,500 to $175,000. The most expensive items are a Matrix 209S plasma asher for $175,000 and a Matrix 105 plasma asher for $98,000, while several Branson and Matrix plasma ashers and etchers are listed at $12,500, $22,500, and $29,500. Semistar Corp. sells used semiconductor equipment and provides parts and service in the U.S.
Plasma etcher rie icp drie bosch process equipmentEmily Tan
This document lists various used semiconductor fabrication equipment for sale, including plasma etchers, reactive ion etchers (RIE), and asher systems from manufacturers like STS, Lam Research, Oxford Instruments, ICP Bosch, and Tegal. The prices range from $275,000 for a Lam Research 4420 plasma etch tool down to $9,500 for a Yield Engineering Systems dry asher. Models include STS Multiplex ICP systems, Lam AutoEtch and Rainbow tools, Oxford Plasmalab RIEs, and various plasma etchers and asher systems from Tegal, Matrix, Plasma Therm, and others.
This document lists several plasma deposition equipment items for sale including their manufacturer, model, type, and price. The most expensive items are a $79,500 Plasma Therm 790 Series PECVD system and a $77,500 Oxford Instruments Plasmalab 80+ DPCVD system. Also listed are lower cost plasma etchers and deposition systems starting at $5,000 from Oxford Plasma Technology.
This document lists various oven and furnace models from different manufacturers along with their prices, ranging from $1,200 to $3,980. It provides contact information for Semistar Corp, a company that sells semiconductor equipment parts and services in the US.
Metrology probe tester equipment instrumentEmily Tan
This document lists various semiconductor manufacturing equipment for sale, including their prices. The most expensive items are an electron beam lithography system for $1,000,000 and an X-ray diffraction system for $78,000. Other listed equipment include wafer probers, thin film measurement systems, surface profilers, and microscopy tools, with prices ranging from $35,000 to under $5,000. The document appears to be from a company called Semistar Corp that sells used semiconductor equipment.
The document lists several used mask aligners for sale from Semistar Corp, including various Canon Neutronix and PLA models priced between $18,500 to $35,000. Contact and company information is provided at the bottom for Semistar Corp, which sells semiconductor equipment parts and used mask aligners in the United States.
This document lists various electron beam evaporators and thermal evaporators for sale from multiple manufacturers including CHA Industries, Temescal, Varian, TES, Airco Temescal, and Kurt J Lesker. The prices range from $145,000 for some combined e-beam and thermal evaporators from Varian and CHA Industries down to $18,500 for older model Varian e-beam evaporators. Contact information is provided for Semistar Corp. regarding sales of semiconductor equipment parts and services.
This document lists equipment for sale from various manufacturers for semiconductor wet processing including batch developing stations, plating equipment, wet benches, and spin dryers priced between $1,980 to $35,000. Key items include a BOLD batch developing station for $35,000, an EEJA manual plater for $35,000, a Gold Techni plating bath system for $15,000, and various wet process equipment from APT and Wet Process Equipment between $7,500 to $9,500.
This document lists various sputtering systems and their prices from different manufacturers including Perkin-Elmer, Materials Research Corporation, Temescal, CPA, and CVC Products. The most expensive systems are three Perkin-Elmer models ranging from $125,000 to $155,000, while the cheapest option is a CVC Products system at $12,500. Contact information is provided for Semistar Corp for additional semiconductor equipment parts and services.
This document contains an inventory list of 215 items located in either Nanjing, China or Morgan Hill, CA USA. The majority of the items are various types of process equipment used in semiconductor manufacturing, including bonders, chillers, coaters, CVD tools, developers, etchers, evaporators, furnaces, metrology equipment, ovens, PECVD tools, plasma ashers, pumps, RTP tools, sputtering systems and more. The items are from various manufacturers such as K&S, SMC, SVG, SOLITEC, PlasmaLab, BOLD, Temescal, Varian, Ditector, CANON, Nanometrics, Gaertner Scientific, Rudolph Research
Electronic test equipment, Oscilloscope, Spectrum, Analyzer ,DMMEmily Tan
Electronic test equipment Oscilloscope Spectrum Analyzer DMM:The following items (ID-SS8267-1-1) are subject to prior sale without notice. These items are only for end users.
Lam Research ,Novellus, Gasonics, Tel ,Tokyo Electron Ltd, Matrix etc. Spare ...Emily Tan
Lam Research Novellus Gasonics Tel Tokyo Electron Ltd Matrix etc. Spare Parts:The items are subject to prior sale without notice. These items are only for end users.
Semiconductor Equipment:Please us for more info and availability. They are subject to prior sale without notice.These items are only for end users. Appreciate your time! sales@semistarcorp.com . ID-8032-1-1
Semiconductor Equipment Inventory.Please email us for more info/ the availability of these equipment. These are subject to prior sale.Appreciate your time! sales@semistarcorp.com
Digital Banking in the Cloud: How Citizens Bank Unlocked Their MainframePrecisely
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.