www.spooky2-mall.com-Do you have a clear understanding of rife machine for cancers? In this document, you will learn more: remote vs contact and their settings.
2. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
The Problem With Cancer
Using Rife technology to deal with cancer isn’t simply a matter of killing
cancer cells. There’s much more to it than that. Cancer cells produce
many poisonous byproducts as they furiously reproduce.
When you kill a cancer cell, it’s likely to rupture and release its toxic
contents. At best, it may retain cell wall integrity until nature and time take
over. At which point it spills its poisons.
So, depending on the extent of the cancer, and the rate at which you kill
it, you’re going to have countless dead cancer cells in your body, all of
them carrying – or leaking – poison. While our healthy cells are constantly
dying and being replaced, these are not filled with toxins, and they’re not
all dying at the same time, so our body systems can deal with this natural
process without problems.
3. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Dr. Royal Raymond Rife treated his cancer patients for five minutes a day
every third day. He limited his treatments in this way so as not to
overwhelm patients with toxins from killed cells, and to allow their body
systems and organs enough time to deal with the cleanup of the
destruction his treatment had achieved.
There’s a very good reason for what he did: toxic overload can shut down
the liver and kidneys very quickly, and it can even kill. At that time, only
killing frequencies existed – detox and support frequencies came later.
So you have to get all this dangerous rubble out of the body as quickly as
possible. And you do that by using detox frequencies. Doing this prevents
the pollutants from settling, and keeps them moving so that they enter the
bloodstream, the lymphatic system, and the intestines. And this is where
the next problem arises.
4. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
The eliminatory system consists of the liver, the kidneys, the intestines,
the lungs, and the skin, but only the first two need concern us here.
Even a healthy body would find it difficult and damaging to try to cope
with an internal tidal wave of toxins like this, so a body weakened by
cancer and the ravages of certain other treatments would be brought
under great strain – unless the liver, kidneys, and intestines were
actively supported.
And then there’s the problem of managing the pain of cancer without
further poisoning the body.
5. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
So dealing effectively with cancer isn’t just one single job of killing
cancer cells. It’s actually four tasks, all of them vital – killing, detox,
support, and pain control.
Prior to the introduction of the Spooky2 Rife System, you’d have had
to tackle these jobs one after another. So you would have been
sitting next to a machine holding electrodes, not just for a couple of
hours as you perhaps believed, but for anything up to eight hours
every day, depending on your condition.
But, uniquely, Spooky2 offers the extraordinary ability to perform
parallel processing. This allows all four jobs to be performed at the
same time by using four generators operating in Remote Mode. Plus
you can use one of them daily in Contact Mode for some heavy-duty
killing, detox, support, or pain control.
6. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
So for certain conditions like late-stage cancers, Lyme Disease,
Morgellons Disease, and other synergistic multi-system multi-pathogen
illnesses, we recommend using four generators. However, we know
that times are tough, and that money doesn’t grow on trees, especially
when you’re unwell.
Not everyone can afford the $750 needed for four generators and their
peripherals – I get many emails from brokepeople in big trouble, and
this document is an attempt to point them in the right direction.
7. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
While one single generator is certainly a better proposition than any
old-fashioned Rife machine – because you can use it in Remote Mode
when you’re not doing Contact Mode work or while you sleep – it’s still
a very long and steep climb. However, with two generators, suddenly
the task is not so Herculean.
If you’re willing to spend the time doing a few reasonably short Contact
Mode sessions a day, then switching that generator to Remote Mode,
you can make good progress with all four aspects of the task.
This PDF aims to outline how I would personally approach it.
8. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Contact vs Remote
The first thing you need to know is that Contact Mode isn’t
intrinsically any more powerful than Remote Mode, but it produces
beneficial effects a good deal quicker. It’s been authoritatively
estimated that to produce the same effectiveness as one Contact
Mode session, you would need to the apply the same frequencies
between 10 and 20 times in a row in Remote Mode. So a contact
session that takes 30 minutes would take between five and 10
hours to produce the same effect in Remote Mode.
9. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Since the only real difference between each mode is time, this
means that the only settings that need to be changed to switch
a killing Program from Contact Mode to Remote Mode are the
Repeat values, and possibly the Dwell Multiplier and Reduce
Amplitude (for detox, support, and pain only – hereinafter
called “healing”).
10. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
11. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Contact Mode Settings
The settings illustrated above for killing and healing differ in only one
respect – Reduce Amplitude.
Repeats: the values of 1 for killing and healing tell Spooky2 to run the
Program once, then stop.
Dwell Multiplier: the value of 1 tells Spooky2 to run each frequency for
its default dwell (which is known to work).
Reduce Amplitude: for killing, this box is unticked because the “JW–
Killing” Preset automatically transposes all frequencies up to a level where
they don’t “bite.” For healing, the “JW–Healing” Preset doesn’t do this
because Rife healing uses frequencies in a different way to killing, so this
box is ticked because low frequencies can “bite.”
12. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Remote Mode Settings
The settings illustrated above for killing and healing are identical.
Repeats: the Repeat Each Set value of 4 is to allow each set in
any multi-set Program to be repeated four times before the next
set, preventing dilution of effectiveness. The Repeat Program
value of 0 tells Spooky2 to continue looping the Program until you
manually stop it.
Dwell Multiplier: the choice of 1 or .33 is offered here because
many users have found success by using dwells shorter than the
default. The result is that the user is exposed to each frequency
for one-third of the normal time, but is consequently exposed to it
three times more often in the same time period.
13. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Important
Users have reported excellent results from using an alternative
setting to those above – “DH–Killing/Healing.” It’s used for both
killing and healing, and you can find it in the “OK, Let’s Rife”
section of the Spooky2 User’s Guide.
Don’t make the mistake of packing your Program with sets. This
makes it difficult to identify which set may be responsible for
producing the most beneficial effects, and it also makes it slower to
find such sets. It’s less effective, too. For example, if you have six
30-minute sets in your Program and one of them is working, this
means it’s only going to be transmitted once every three hours.
Allow three days to test a set, then try another.
14. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Making Your Own Changes
JW–Killing: these are very carefully thought-out settings and I can’t
see any way to improve on them.
JW-Healing: the only changes I occasionally make is to switch the
square wave for a sawtooth, and use a value of 20 for the Amplitude.
Try both, and stick with what works best for you.
DH-Killing/Healing: when killing, you may wish to enter 64000 into
the < field of the Frequency Limits pane. This raises all low sub-
harmonics into the KHz range, which is more effective.
15. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Points to Remember
‣Before embarking on the main task, it’s strongly advised that you first
complete the regimen outlined in Appendix A of the Spooky2 User’s
Guide. Subsequent sessions will be more effective as a result.
‣For killing in Contact Mode, the higher a frequency is, the deeper it
penetrates the body, and the easier it enters the cells.
‣You must actively assist in the detox process by drinking at least three
litres of pure water daily, half of it before noon. This will help flush out the
kidneys, and increase electrical conductivity in the body, especially if you
add a tiny pinch of sea salt or Himalayan Pink Salt to your daily water
ration.
16. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
‣In any battle, the more weapons that are brought to bear on
the enemy, the more likely it is that victory will be achieved.
Don’t neglect other modalities, especially diet, naturopathic,
homeopathic, and herbal.
‣The work of Dr. Bradley Nelson and others has clearly
demonstrated that emotional trauma lies at the root of almost
every cancer. His ground-breaking book “The Emotion Code”
demonstrates a way to resolve this, and a PDF of this is free to
download.
17. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
18. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
19. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
20. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Thank you!