Toyota 7FBH25 Forklift Service Repair Manualfuudjfjkkskkfm
This is the Highly Detailed factory service repair manual for theTOYOTA 7FBH25 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 7FBH25 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Charger
Controller
Muti-Display Functions
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
SAS Functions (OPT)
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 7FBH25 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Mitsubishi electronic multi measuring instruments super-s series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
cnc, mesin cnc, fanuc, haas, makino, yaskawa, doosan, mesin bubut, mesin milling, mesin tapping, wirecut, mesin press, mesin pabrik, mesin otomotif, sparepart mesin cnc
Toyota 7FBH25 Forklift Service Repair Manualfuudjfjkkskkfm
This is the Highly Detailed factory service repair manual for theTOYOTA 7FBH25 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 7FBH25 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Charger
Controller
Muti-Display Functions
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
SAS Functions (OPT)
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 7FBH25 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Mitsubishi electronic multi measuring instruments super-s series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
cnc, mesin cnc, fanuc, haas, makino, yaskawa, doosan, mesin bubut, mesin milling, mesin tapping, wirecut, mesin press, mesin pabrik, mesin otomotif, sparepart mesin cnc
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
2. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
INDEX
page 2
036-0424-01
INDEX
GENERAL INFORMATION ....................................................................... CHAPTER A
CHASSIS................................................................................................... CHAPTER 0000
MOTORS / ENGINES ............................................................................... CHAPTER 1000
TRANSMISSION / DRIVE GEAR.............................................................. CHAPTER 2000
BRAKE ...................................................................................................... CHAPTER 3000
STEERING SYSTEM ................................................................................ CHAPTER 4000
ELECTRICAL SYSTEM ............................................................................ CHAPTER 5000
FYDRAULIC/PNEUMATIC SYSTEM ........................................................ CHAPTER 6000
MAST GROUP .......................................................................................... CHAPTER 7000
ATTACHEMENT........................................................................................ CHAPTER 8000
OPTIONS .................................................................................................. CHAPTER 9000
MAINTENANCE TABLES.......................................................................... CHAPTER B
SAFETY INFORMATION .......................................................................... CHAPTER C
3. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 2
036-0424-001
CHASSIS
VEHICLE EXTERIOR VIEW..................................................................................... page 3
VEHICLE MODELS.................................................................................................. page 4
FRAME NUMBER .................................................................................................... page 4
HOW TO USE THIS MANUAL ................................................................................. page 5
DISASSEMBLY · INSPECTION · REASSEMBLY .................................................... page 5
TERMINOLOGY....................................................................................................... page 6
ABBREVIATIONS..................................................................................................... page 6
SI UNITS .................................................................................................................. page 7
OPERATING TIPS.................................................................................................... page 8
GENERAL INSTRUCTIONS .................................................................................... page 8
JACK-UP POINT ...................................................................................................... page 9
LIFTING THE VEHICLE ........................................................................................... page 10
MEMBER WEIGHTS................................................................................................ page 11
TOWING THE VEHICLE .......................................................................................... page 11
ELECTRICAL PARTS INSPECTION........................................................................ page 12
TIGHTENING TORQUE TABLE............................................................................... page 13
COMPONENTS (Body & Frame) ............................................................................. page 14
BATTERY COVER.................................................................................................... page 18
REMOVAL · INSTALLATION .................................................................................... page 18
COUNTERWEIGHT ................................................................................................. page 19
REMOVAL · INSTALLATION .................................................................................... page 19
OPERATOR’S SEAT ................................................................................................ page 20
REMOVAL · INSTALLATION .................................................................................... page 20
FUSES...................................................................................................................... page 21
5. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 4
036-0424-01
VEHICLE MODELS
FRAME NUMBER
Vehicle model
code
Load Capac-
ity
Control method Voltage (V)
100 1.0 ton AC microcomputer controller 24
130 1.25 ton ↑ ↑
150 1.5 ton ↑ ↑
Vehicle model code S/N Format Serial number position
100 CE000000
130 CE000000
150 CE000000
6. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 5
HOW TO USE THIS MANUAL
EXPLANATION METHOD
1. Operating procedure
2. Operating procedures are described using either pattern A or pattern B.
3. Pattern A: Each step of the operation is explained with its own illustration.
4. Pattern B: The entire operation is indicated by step numbers in one illustration, followed by
cautions, notes, and point operations.
Example of pattern B
DISASSEMBLY · INSPECTION · REASSEMBLY
T=N·m
Disassembly Procedure
1 Remove the cover. [POINT 1]
2 Remove the bushing. [POINT 2]
3 Remove the gear.
Point Operations
[POINT 1]
Disassembly:
Make match marks before removing the pump cover
[POINT 2]
Inspection:
Measure the bushing inside diameter
Limit 19.12 mm.
• Some step numbers may be
omitted in some illustrations.
• When a part requiring
tightening torque instruction is
not indicated in the illustration,
the part name is described in
the illustration frame.
T = 46.1 to 48.1
(470 to 490)
[34.0 to 35.5]
1
2
3
4
7
65
8
5
9 1
Operation to be explained
Explanation of operation point with illustration
7. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 6
036-0424-01
1. Matters omitted from this manual
(1) This manual omits descriptions of the following jobs, but perform them in actual operation:
(a) Cleaning and washing of removed parts as required
(b) Visual inspection (partially described)
TERMINOLOGY
Caution:
Important matters, negligence of which may cause accidents. Be sure to observe them.
Note:
Important items, negligence of which may cause accidents, or matters in operating procedure
which require special attention.
Standard: Value showing the allowable range in inspection or adjustment
Limit: The maximum or minimum value allowed in inspection or adjustment.
ABBREVIATIONS
Abbreviation Meaning Abbreviation Meaning
ATT Attachment SAE
Society of Automotive Engineers
(USA)
EHPS
Electronically controlled fully
hydraulic power steering
RH Right hand
FHPS Fully hydraulic power steering SST Special service tool
LH Left hand STD Standard
L/ Less T= Tightening torque
OPT Option T Number of teeth ( T)
O/S Oversize U/S Undersize
PS Power steering W/ With
8. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 7
SI UNITS
Meaning of SI
This manual uses SI units. SI represents the International System of Units, which was established to
unify the various systems of units used in the past for smoother international technical communication.
New Units Adopted in SI
<Reference>
* 1: X represents the value in SI units as converted from 1 [in conventional units], which can be
used as the rate for conversion between conventional and SI units.
* 2: In the past, kilogram [kg] representing mass was often used in place of weight kilogram
[kgf], which should be used as the unit of force.
Conversion between Conventional and SI Units
Equation for conversion
When converting, change the unit of the value in conventional or SI units to the one in the
conversion rate column in the table above before calculation. For example, when converting 100
W to the value in conventional unit PS, first change it to 0.1 kW and divide by the conversion
rate 0.735499.
Item New unit Conventional
unit
Conversion rate*1
(1 [conventional unit] = X [SI
unit])
Force*2
N (newton) kgf 1 kgf = 9.80665 N
Torque*2
(Moment)
N·m kgf·cm 1 kgf·cm = 9.80665 N·m
Pressure*2
Bar kgf/cm2
1 Bar = 1 kgf / cm2
Pressure*2
Pa (pascal) kgf/cm2
1 kgf/cm2
= 98.0665 kPa = 0.0980665 MPa
↑ ↑ mmHg 1 mmHg = 0.133322 kPa
Revolving rpm rpm 1 rpm = 1 r/min
Spring con- N/mm kgf/mm 1 kgf/mm = 9.80665 N/mm
Volume l cc 1 cc = 1 ml
Power W PS system 1 PS = 0.735499 kW
Heat quantity W·h cal 1 kcal = 1.16279 W·h
Specific fuel g/W·h g/PS·h 1 g/PS·h = 1.3596 g/kW·h
Value in SI unit = Conversion rate × Value in conventional unit Conversion rate: Figure correspond-
ing to X in the conversion rate col-
umn in the table aboveValue in conventional unit = Value in SI unit ÷ Conversion rate
9. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 8
036-0424-01
OPERATING TIPS
GENERAL INSTRUCTIONS
1. Safe operation
(1) After jacking up, always support with wooden blocks or rigid stands.
(2) When hoisting the vehicle or its heavy component, use wire rope(s) with a sufficient reserve in
load capacity.
(3) Always disconnect the battery plug before the inspection or servicing of electrical parts.
2. Skillful operation
(1) Prepare the tools, necessary measuring instruments (circuit tester, megohmmeter, oil pressure
gauge, etc.) and SSTs before starting operation.
(2) Check the cable color and wiring state before disconnecting any wiring.
(3) When overhauling functional parts, complicated sections or related mechanisms, arrange the
parts neatly to prevent confusion.
(4) When disassembling and inspecting a precision part such as the control valve, use clean tools
and operate in a clean location.
(5) Follow the specified procedures for disassembly, inspection and reassembly.
(6) Always replace gaskets, packing, O-rings, self-locking nuts and cotter pins with new ones each
time they are disassembled.
(7) Use genuine Toyota parts for replacement.
(8) Use specified bolts and nuts and observe the specified tightening torque when reassembling.
(Tighten to the medium value of the specified tightening torque range.) If no tightening torque is
specified, use the value given in the “standard tightening torque table”.
3. Protection of functional parts (battery operated vehicles)
(1) Before connecting the battery plug after vehicle inspection or maintenance, thoroughly check
each connector for any connection failure or imperfect connection.
Failure or imperfect connection of connectors related to controllers, especially, may damage
elements inside the controllers.
4. Defect status check
Do not start disassembly and/or replacement immediately, but first check that disassembly and/or
replacement is necessary for the defect.
5. Waste fluid disposal
Always use a proper container when draining waste fluid from the vehicle.
Careless discharge of oil, fuel, coolant, oil filter, battery or other harmful substance may adversely
affect human health and the environment. Always collect and sort well, and ask specialized
companies for appropriate disposal.
10. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 9
JACK-UP POINT
Always observe the following instructions when jacking up the vehicle:
• When the fork is loaded, unload it and park the vehicle on a flat surface. Be sure to avoid an
inclined or rough surface.
• Use a jack with ample capacity and jack up the vehicle at the specified jack-up point. Jacking
up at any other point is dangerous.
• Always support the load of jacked-up vehicle with wooden blocks at specified points.
Supporting the vehicle with the jack only is very dangerous.
• Never, under any circumstances, put any part of the body (including hands and feet) under
the jacked-up vehicle.
11. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 10
036-0424-01
LIFTING THE VEHICLE
When hoisting the vehicle, always observe the specified hoist attachment section and method. Never
hoist by any other attachment section as it is very dangerous.
12. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 11
MEMBER WEIGHTS
Unit: kg
TOWING THE VEHICLE
Note the cautions below when towing the vehicle.
1. Lift the rear wheels for towing
2. The traveling speed when towing must not exceed the maximum traveling speed of the forklift.
3. Before starting towing, always set the key switch to OFF and the direction switch to the neutral
position.
4. Before towing, either remove the fork or take action to prevent the fork from coming into contact
with the ground due to bouncing.
Member Vehicle model code Weight
BATTERY
100 min. 381 - max. 420
130 min. 524 - max. 590
150 min. 600 - max. 690
Drive motor All Models Approx.34
Pump motor (Hydraulic pump + electric motor) All Models Approx.40
Rear axle L/Drive motor and wheel All Models Approx.53
Counterweight All models 900
Mast W/ lift bracket (W/ lift cylinder, L/ fork, Lifting
height 4000 mm, V mast
All
Models
Approx
450
Vehicle weight (w/battery)
100 Approx.2550
130 Approx.2820
150 Approx.2930
13. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 12
036-0424-01
ELECTRICAL PARTS INSPECTION
1. Always disconnect the battery plug before inspecting or servicing electrical parts.
2. Pay sufficient attention when handling electronic parts.
(1) Never subject electronic parts, such as computers and relays, to impact.
(2) Never expose electronic parts to high temperature or moisture.
(3) Do not touch connector terminals, as they may be deformed or damaged due to static electricity.
3. Use a circuit tester that matches the object and purpose of measurement.
Analog type: This type is convenient for observing movement during operation and the operating
condition. Measured value is only a reference
Digital type: A fairly accurate reading is possible. However, it is difficult to observe operation or
movement.
(1) Difference between results of measurement with analog and digital types
∗ The results of measurements using the analog type and the digital type may be different.
Differences between the polarities of the analog type and the digital type are described below.
1) Analog circuit tester
Example of measurement result
Tester range: kΩ range
2) Digital circuit tester
Example of measurement result
Tester range: 2 MΩ range
Analog type
Forward
Continuity
11 kΩ
Reverse
No continuity
∞
Digital type
Forward
No continuity
1
Reverse
Continuity
2 MΩ
Forward Reverse
Forward Reverse
14. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 13
TIGHTENING TORQUE TABLE
The tables here below are valid for screws and bolts without superficial covering, preventively
lubricated with oil.
SCREWS WITH “ISO” METRIC COARSE THREAD
SCREWS WITH “ISO” FINE THREAD
Nominal
diameter
mm
PRELOADING V (IN) TORQUE Max (N.m)
6 D 8 G 10 K 12 K 6 D 8 G 10 K 12 K
6,6 8,8 10,9 12,9 6,6 8,8 10,9 12,9
M 4 x 0,7
M 5 x 0,8
M 6 x 1
M 7 x 1
M 8 x 1,25
M 9 x 1,25
M 10 x 1,5
M 12 x1,75
M 14 x 2
M 16 x 2
M 18 x 2,5
M 20 x 2,5
M 22 x 2,5
M 24 x 3
M 27 x 3
M 30 x 3
21781
3502
4974
7142
9025
11870
14519
20797
28351
38750
47480
60430
74850
87309
112815
138321
3865
6229
8849
12753
16088
21190
25506
37082
50620
68866
84366
107910
133416
155979
202086
247212
5435
8780
12459
17854
22661
29921
35905
52189
71123
97119
118701
151565
187371
218763
283509
347274
6524
10497
14911
21386
27174
35610
42968
62588
85347
116739
142245
181485
224649
261927
340407
415944
1,7
3,2
5,7
9,2
13,6
20,1
27,8
46,5
74
113
157
218
294
383
549
755
3
5,8
10
16,6
24,3
36
49
83
132
200
279
388
520
687
991
1354
4,2
8,2
14,3
23
34
50,8
69
117
186
283
392
545
731
961
1393
1893
5,1
9,9
17,1
27,8
41,1
60,5
82
140
223
339
471
653
883
1148
1668
2276
Nominal
diameter
mm
PRELOADING V (IN) TORQUE Max (N.m)
6 D 8 G 10 K 12 K 6 D 8 G 10 K 12 K
6,6 8,8 10,9 12,9 6,6 8,8 10,9 12,9
M 8 x 1
M 10 x1,25
M 12 x1,25
M 12 x1,5
M 14 x 1.5
M 16 x 1,5
M 18 x 1,5
M 20 x 1,5
M 22 x 1,5
M 24 x 2
M 27 x 2
M 30 x 2
9761
15107
23740
21778
30902
41202
53268
67689
82404
94667
122625
154017
17168
26879
40613
38848
54936
73575
95157
118701
147150
168732
218763
272718
24231
37867
56898
54642
77303
103005
133416
168242
206010
237402
307053
384552
29038
45420
68474
65531
92705
123606
159903
202086
247212
284490
367875
461070
14,5
28,4
52
49
78
118
171
239
314
402
589
814
25,5
51
89
87
140
211
304
422
564
721
1050
1442
36,2
72
126
123
196
294
422
598
790
1010
1472
2040
43
85
151
147
235
353
510
716
952
1216
1766
2453
15. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 14
036-0424-01
COMPONENTS
Body & Frame
19. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 18
036-0424-01
BATTERY COVER
REMOVAL • INSTALLATION
Removal Procedure
1 Disconnect the battery plug.
2 Open the battery cover.
3 Use string to tie the battery cover W/seat to the head guard rear pillar.
4 Disconnect the wiring of the seat switch.
5 Disconnect the battery cover gas spring (on the frame side).
6 Close the battery cover.
7 Remove the battery cover hinge set bolt.
8 Remove the battery cover W/ seat.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. ELECTRIC
SERVICE MANUAL
1,0-1,5 t A.C.
036-0424-01
CHAPTER 0000
page 19
COUNTERWEIGHT
REMOVAL • INSTALLATION
Removal Procedure
1 Disconnect the battery plug.
2 Remove the rear cover and battery cover.
3 Remove the battery.
4 Disconnect the controller cables and the contactor group.
5 Disconnect the hydraulic motor hoses.
6 Set the hoisting attachment and remove the counterweight set bolt.
7 Remove the counterweight.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
Tightening torque of the 4 bolts of the counterweight = 425 Nm.
(Note: Tight the bolts with the sequence V1, V2, V3, V4).
Tightening torque of the 2 bolts of the OHG = 83 Nm.
V4
V3
V1
V2
22. 1,0-1,5 t A.C.
SERVICE MANUAL
ELECTRIC
CHAPTER 0000
page 20
036-0424-01
OPERATOR’S SEAT
REMOVAL • INSTALLATION
Removal Procedure
1 Open the battery cover.
2 Disconnect the wiring of the seat switch.
3 Remove the operator’s seat set nuts. (Be careful not to drop the operator’s seat).
4 Remove the operator’s seat.
Installation Procedure
The installation procedure is the reverse of the removal procedure.