TLC is used to separate the compounds.the benzoic.pdf
•
0 likes•2 views
TLC is used to separate the compounds.the benzoic acid and methanol are more polar so these have small rf value.so we can easyly separate the ester Solution TLC is used to separate the compounds.the benzoic acid and methanol are more polar so these have small rf value.so we can easyly separate the ester.
Report
Share
Report
Share
Download to read offline
Recommended
10. The push button is pushed to the second stop when we pipette out.pdf
10. The push button is pushed to the second stop when we pipette out or transfer the sample, and
to completely void the sample without leaving any sample in the pipette tips
11. The button is to be released after it is withdrawn from the solution/liquid. If it is released
prior to withdrawal, the solution reenters the pipette tip.
12. If the push button is pressed to the second stop and is released even before the pipette tip is
withdrawn from the solution, the solution enters the pipette.
13. When concentrations or dilutions of the sample that are to be transferred changes, when
different solutions or chemicals are transferred, when containment is required, tips need to be
changed with each transfer.
14. The fragments obtained will have blunt ends if the restriction enzyme cuts at the center. Yes.
They are still useful because linkers or adapters can be attached to the blunt end to make them
useful. Moreover, new restriction sites can be created by attaching linkers or adapters.
15. Yes it can be done. The restriction enzyme creates the same overhanging ends since it
recognizes the same restriction site in both the DNA. Therefore, the two different DNA can
basepair at the sticky ends.
Solution
10. The push button is pushed to the second stop when we pipette out or transfer the sample, and
to completely void the sample without leaving any sample in the pipette tips
11. The button is to be released after it is withdrawn from the solution/liquid. If it is released
prior to withdrawal, the solution reenters the pipette tip.
12. If the push button is pressed to the second stop and is released even before the pipette tip is
withdrawn from the solution, the solution enters the pipette.
13. When concentrations or dilutions of the sample that are to be transferred changes, when
different solutions or chemicals are transferred, when containment is required, tips need to be
changed with each transfer.
14. The fragments obtained will have blunt ends if the restriction enzyme cuts at the center. Yes.
They are still useful because linkers or adapters can be attached to the blunt end to make them
useful. Moreover, new restriction sites can be created by attaching linkers or adapters.
15. Yes it can be done. The restriction enzyme creates the same overhanging ends since it
recognizes the same restriction site in both the DNA. Therefore, the two different DNA can
basepair at the sticky ends..
1. Working capital is the capital that a company uses for its day to.pdf
1. Working capital is the capital that a company uses for its day to day operations. Working
capital is computed using the formula: Working capital = current assets – current liabilities.
2. Determinants of working capital requirements are – nature of business, seasonality of
operations, production policy, market conditions and conditions of supply. A service company
will have a lower working capital requirement than a manufacturing company. Firms with
seasonality in operations will have higher fluctuations with regards to their working capital
requirements. Market conditions in the form of degree of competition will affect working capital
requirements. Higher competitive pressure will increase working capital requirements.
3. Three major decisions that managers have to take while performing the finance function are:
(i) Investment decision – Managers have to select those assets that the business will invest in. It
is also known as capital budgeting decisions.
(ii) Financing decision – These decisions pertain to determining how the total funds that are
required for the business will be obtained – will it be through debt or equity or a mix of debt or
equity.
(iii) Dividend decision – This pertains to determining what quantum of earnings should be
distributed to shareholders as dividends and what quantum should be retained for meeting future
growth requirements of the company.
4. Financial management involves planning, directing, monitoring and controlling the monetary
resources of a company in such a manner that the goals and objectives of the company are
achieved in an efficient manner. It involves management of capital budgeting, capital structure,
working capital management, etc. Financial management is important as it helps an organization
to set clarity towards its financial goals and helps in efficient utilization of resources.
5. Cash flow is not a suitable judge of profitability as it merely shows the changes in cash
position of a firm in a financial year from its operating activities, from its financing activities and
from its investing activities. Cash flow statement does not help us to determine gross profit
margins, operating profit margins and net profit margins. We can just gauge the reason for
changes in cash position in a year.
6. Financial risk refers to all kinds of risk associated with a financial transaction and an
investment transaction. It can be in the form of credit risk, asset backed risk, investment risk etc.
These risks arise due to the fact that there is a probability of loss that is inherent in any financing
and investment method and this probability of loss cannot be avoided.
Solution
1. Working capital is the capital that a company uses for its day to day operations. Working
capital is computed using the formula: Working capital = current assets – current liabilities.
2. Determinants of working capital requirements are – nature of business, seasonality of
operations, production policy, market conditions and condi.
1. no2.The Waterfall model has some disadvantages.Agile software.pdf
1. no
2.The Waterfall model has some disadvantages.
Agile software development evolved to eliminate the issues the Waterfall model has. It has a
completely new framework. While the Waterfall model has a sequential design, the Agile model
followed an incremental approach.When clients who used to follow the Waterfall model
switched to Agile, the transition brought many issues with it. The reason being inadaptability to a
different approach to software development. The end product turned out to be a disaster.
3. yes
4. The initialization step creates a base version of the system. The goal for this initial
implementation is to create a product to which the user can react. It should offer a sampling of
the key aspects of the problem and provide a solution that is simple enough to understand and
implement easily. To guide the iteration process, a project control list is created that contains a
record of all tasks that need to be performed. It includes such items as new features to be
implemented and areas of redesign of the existing solution.
5.yes
6.the mainly reason is to testing should be conducted faulty elements of the software can be
quickly identified because few changes are made within any single iteration.Customer can
respond to features and review the product for any needed or useful changes., a plan is developed
for the next increments, and modifications are made accordingly. This process continues, with
increments being delivered until the complete product is delivered.
7.Agile Software Development
Because a framework that is used to structure, plan, and control the process of developing an
information system.The methods attempt to minimize risk by developing software in short
timeboxes, called iterations, Each iteration is like a miniature software project of its own, and
includes all the tasks necessary to release the mini increment of new functionality: planning,
requirements analysis, design, coding, testing, and documentation. While iteration may not add
enough functionality to warrant releasing the product, an agile software project intends to be
capable of releasing new software at the end of every iteration emphasize working software as
the primary measure of progress. Combined with the preference for face-to-face communication,
agile methods produce very little written documentation relative to other methods.
Solution
1. no
2.The Waterfall model has some disadvantages.
Agile software development evolved to eliminate the issues the Waterfall model has. It has a
completely new framework. While the Waterfall model has a sequential design, the Agile model
followed an incremental approach.When clients who used to follow the Waterfall model
switched to Agile, the transition brought many issues with it. The reason being inadaptability to a
different approach to software development. The end product turned out to be a disaster.
3. yes
4. The initialization step creates a base version of the system. The goal for this initial
implementat.
True ; this is known as Tyndal effect .pdf
True ; this is known as Tyndal effect
Solution
True ; this is known as Tyndal effect.
The answer to this question is (E) If you look at.pdf
The answer to this question is (E) If you look at N2, you can see that as 2 moles of
N2 is formed 4 moles of NH3 is reacting. Thus, since the rate of formation of N2 is 2.0
mol/(L*s), the rate of formation of NH3 is double that (2*2.0mol/(L*s))=4.0 mol/(L*s). I hope
this helped!
Solution
The answer to this question is (E) If you look at N2, you can see that as 2 moles of
N2 is formed 4 moles of NH3 is reacting. Thus, since the rate of formation of N2 is 2.0
mol/(L*s), the rate of formation of NH3 is double that (2*2.0mol/(L*s))=4.0 mol/(L*s). I hope
this helped!.
Redox reactions are analogous in that they are el.pdf
Redox reactions are analogous in that they are electron transfer reactions. Certain
chemicals are oxidizers, like O2, which take electrons. While others are reducers, which are
oxidizing agents, and give electrons. The better the reducing agent a chemical it is, the worse
oxidizing agent it is.
Solution
Redox reactions are analogous in that they are electron transfer reactions. Certain
chemicals are oxidizers, like O2, which take electrons. While others are reducers, which are
oxidizing agents, and give electrons. The better the reducing agent a chemical it is, the worse
oxidizing agent it is..
Recommended
10. The push button is pushed to the second stop when we pipette out.pdf
10. The push button is pushed to the second stop when we pipette out or transfer the sample, and
to completely void the sample without leaving any sample in the pipette tips
11. The button is to be released after it is withdrawn from the solution/liquid. If it is released
prior to withdrawal, the solution reenters the pipette tip.
12. If the push button is pressed to the second stop and is released even before the pipette tip is
withdrawn from the solution, the solution enters the pipette.
13. When concentrations or dilutions of the sample that are to be transferred changes, when
different solutions or chemicals are transferred, when containment is required, tips need to be
changed with each transfer.
14. The fragments obtained will have blunt ends if the restriction enzyme cuts at the center. Yes.
They are still useful because linkers or adapters can be attached to the blunt end to make them
useful. Moreover, new restriction sites can be created by attaching linkers or adapters.
15. Yes it can be done. The restriction enzyme creates the same overhanging ends since it
recognizes the same restriction site in both the DNA. Therefore, the two different DNA can
basepair at the sticky ends.
Solution
10. The push button is pushed to the second stop when we pipette out or transfer the sample, and
to completely void the sample without leaving any sample in the pipette tips
11. The button is to be released after it is withdrawn from the solution/liquid. If it is released
prior to withdrawal, the solution reenters the pipette tip.
12. If the push button is pressed to the second stop and is released even before the pipette tip is
withdrawn from the solution, the solution enters the pipette.
13. When concentrations or dilutions of the sample that are to be transferred changes, when
different solutions or chemicals are transferred, when containment is required, tips need to be
changed with each transfer.
14. The fragments obtained will have blunt ends if the restriction enzyme cuts at the center. Yes.
They are still useful because linkers or adapters can be attached to the blunt end to make them
useful. Moreover, new restriction sites can be created by attaching linkers or adapters.
15. Yes it can be done. The restriction enzyme creates the same overhanging ends since it
recognizes the same restriction site in both the DNA. Therefore, the two different DNA can
basepair at the sticky ends..
1. Working capital is the capital that a company uses for its day to.pdf
1. Working capital is the capital that a company uses for its day to day operations. Working
capital is computed using the formula: Working capital = current assets – current liabilities.
2. Determinants of working capital requirements are – nature of business, seasonality of
operations, production policy, market conditions and conditions of supply. A service company
will have a lower working capital requirement than a manufacturing company. Firms with
seasonality in operations will have higher fluctuations with regards to their working capital
requirements. Market conditions in the form of degree of competition will affect working capital
requirements. Higher competitive pressure will increase working capital requirements.
3. Three major decisions that managers have to take while performing the finance function are:
(i) Investment decision – Managers have to select those assets that the business will invest in. It
is also known as capital budgeting decisions.
(ii) Financing decision – These decisions pertain to determining how the total funds that are
required for the business will be obtained – will it be through debt or equity or a mix of debt or
equity.
(iii) Dividend decision – This pertains to determining what quantum of earnings should be
distributed to shareholders as dividends and what quantum should be retained for meeting future
growth requirements of the company.
4. Financial management involves planning, directing, monitoring and controlling the monetary
resources of a company in such a manner that the goals and objectives of the company are
achieved in an efficient manner. It involves management of capital budgeting, capital structure,
working capital management, etc. Financial management is important as it helps an organization
to set clarity towards its financial goals and helps in efficient utilization of resources.
5. Cash flow is not a suitable judge of profitability as it merely shows the changes in cash
position of a firm in a financial year from its operating activities, from its financing activities and
from its investing activities. Cash flow statement does not help us to determine gross profit
margins, operating profit margins and net profit margins. We can just gauge the reason for
changes in cash position in a year.
6. Financial risk refers to all kinds of risk associated with a financial transaction and an
investment transaction. It can be in the form of credit risk, asset backed risk, investment risk etc.
These risks arise due to the fact that there is a probability of loss that is inherent in any financing
and investment method and this probability of loss cannot be avoided.
Solution
1. Working capital is the capital that a company uses for its day to day operations. Working
capital is computed using the formula: Working capital = current assets – current liabilities.
2. Determinants of working capital requirements are – nature of business, seasonality of
operations, production policy, market conditions and condi.
1. no2.The Waterfall model has some disadvantages.Agile software.pdf
1. no
2.The Waterfall model has some disadvantages.
Agile software development evolved to eliminate the issues the Waterfall model has. It has a
completely new framework. While the Waterfall model has a sequential design, the Agile model
followed an incremental approach.When clients who used to follow the Waterfall model
switched to Agile, the transition brought many issues with it. The reason being inadaptability to a
different approach to software development. The end product turned out to be a disaster.
3. yes
4. The initialization step creates a base version of the system. The goal for this initial
implementation is to create a product to which the user can react. It should offer a sampling of
the key aspects of the problem and provide a solution that is simple enough to understand and
implement easily. To guide the iteration process, a project control list is created that contains a
record of all tasks that need to be performed. It includes such items as new features to be
implemented and areas of redesign of the existing solution.
5.yes
6.the mainly reason is to testing should be conducted faulty elements of the software can be
quickly identified because few changes are made within any single iteration.Customer can
respond to features and review the product for any needed or useful changes., a plan is developed
for the next increments, and modifications are made accordingly. This process continues, with
increments being delivered until the complete product is delivered.
7.Agile Software Development
Because a framework that is used to structure, plan, and control the process of developing an
information system.The methods attempt to minimize risk by developing software in short
timeboxes, called iterations, Each iteration is like a miniature software project of its own, and
includes all the tasks necessary to release the mini increment of new functionality: planning,
requirements analysis, design, coding, testing, and documentation. While iteration may not add
enough functionality to warrant releasing the product, an agile software project intends to be
capable of releasing new software at the end of every iteration emphasize working software as
the primary measure of progress. Combined with the preference for face-to-face communication,
agile methods produce very little written documentation relative to other methods.
Solution
1. no
2.The Waterfall model has some disadvantages.
Agile software development evolved to eliminate the issues the Waterfall model has. It has a
completely new framework. While the Waterfall model has a sequential design, the Agile model
followed an incremental approach.When clients who used to follow the Waterfall model
switched to Agile, the transition brought many issues with it. The reason being inadaptability to a
different approach to software development. The end product turned out to be a disaster.
3. yes
4. The initialization step creates a base version of the system. The goal for this initial
implementat.
True ; this is known as Tyndal effect .pdf
True ; this is known as Tyndal effect
Solution
True ; this is known as Tyndal effect.
The answer to this question is (E) If you look at.pdf
The answer to this question is (E) If you look at N2, you can see that as 2 moles of
N2 is formed 4 moles of NH3 is reacting. Thus, since the rate of formation of N2 is 2.0
mol/(L*s), the rate of formation of NH3 is double that (2*2.0mol/(L*s))=4.0 mol/(L*s). I hope
this helped!
Solution
The answer to this question is (E) If you look at N2, you can see that as 2 moles of
N2 is formed 4 moles of NH3 is reacting. Thus, since the rate of formation of N2 is 2.0
mol/(L*s), the rate of formation of NH3 is double that (2*2.0mol/(L*s))=4.0 mol/(L*s). I hope
this helped!.
Redox reactions are analogous in that they are el.pdf
Redox reactions are analogous in that they are electron transfer reactions. Certain
chemicals are oxidizers, like O2, which take electrons. While others are reducers, which are
oxidizing agents, and give electrons. The better the reducing agent a chemical it is, the worse
oxidizing agent it is.
Solution
Redox reactions are analogous in that they are electron transfer reactions. Certain
chemicals are oxidizers, like O2, which take electrons. While others are reducers, which are
oxidizing agents, and give electrons. The better the reducing agent a chemical it is, the worse
oxidizing agent it is..
moles NH4NO3 = 2.57 g 80.04 gmol=0.0321 moles H.pdf
moles NH4NO3 = 2.57 g /80.04 g/mol=0.0321 moles H2O = 4 x 0.0321 /2= 0.0642
moles O2 = 0.0321/2 =0.0161 moles N2 = 0.0321 total moles = 0.112 so p = 0.112 x 0.08206 x
520 K/ 4.50=1.06 atm
Solution
moles NH4NO3 = 2.57 g /80.04 g/mol=0.0321 moles H2O = 4 x 0.0321 /2= 0.0642
moles O2 = 0.0321/2 =0.0161 moles N2 = 0.0321 total moles = 0.112 so p = 0.112 x 0.08206 x
520 K/ 4.50=1.06 atm.
mole fraction of He = mole of He total mole now.pdf
mole fraction of He = mole of He/ total mole now mole of He = weight/M.wt = 2/4
= 0.5 mole of O2 = 5.99/32 = 0.187 total mole = 0.687 mole fraction of He = 0.5/0.687 = 0.727
Solution
mole fraction of He = mole of He/ total mole now mole of He = weight/M.wt = 2/4
= 0.5 mole of O2 = 5.99/32 = 0.187 total mole = 0.687 mole fraction of He = 0.5/0.687 = 0.727.
It is a molecular process involving the exchange .pdf
It is a molecular process involving the exchange of bonds between the two reacting
chemical species, which results in the creation of products with similar or identical bonding
affiliations. This is represented by the general reaction scheme: AX + BY ? BX + AY These
chemical species can either be ionic or covalent. When referring to precipitation reactions
between solutions of ions in inorganic chemistry, these were formerly referred to as double
displacement or double replacement reactions, and these terms are still encouraged. It seems that
the term double decomposition is more specifically used when at least one of the substances does
not dissolve in the liquor, as the ligand or ion exchange takes place in the solid state of the
reactant, i.e. AX(aq) + BY(s) ? AY(aq) + BX(s). Types: Neutralization A neutralization reaction
is a specific type of double displacement reaction. Neutralization occurs when an acid reacts with
an equal amount of a base. A neutralization reaction creates a solution of a salt and water. For
example, hydrochloric acid reacts with sodium hydroxide to produce salt and water: HCl (aq) +
NaOH (aq) ? NaCl (aq) + H2O (l) Aqueous metathesis (precipitation) Metathesis reactions can
occur between two inorganic salts when one product is insoluble in water, driving the reaction
forward. For example, the precipitation of silver chloride from a mixture of silver nitrate and
sodium chloride causes sodium nitrate to be left in solution: AgNO3 (aq) + NaCl (aq) ? AgCl (s)
+ NaNO3 (aq) The formation of an insoluble gas that bubbles out of the solution, or a molecular
compound such as water, also drives the reaction to completion. Therefore, a solubility chart (or
general knowledge of solubility rules) can be used to predict whether two aqueous solutions will
react. HSAB theory can also be used to predict the products of a metathesis reaction. Aqueous
metathesis (double decomposition) The reactants need not to be dissolved for metathesis
reactions to take place. An example of this is the formation of barium thiocyanate when boiling a
mixture of copper(I)thiocyanate and barium hydroxide in water: Ba(OH)2 (s) + 2 CuCNS (s) ?
Ba(CNS)2 (aq) + 2CuOH (s) Acid and carbonates A subcategory of aqueous metathesis
reactions is the reaction of an acid with a carbonate or bicarbonate. Such a reaction always yields
carbonic acid as a product, which spontaneously decomposes into carbon dioxide and water. The
release of carbon dioxide gas from the reaction mixture drives the reaction to completion. For
example, a common, science-fair \"volcano\" reaction involves the reaction of acetic acid with
sodium bicarbonate: HCH3COO (aq) + NaHCO3 (s) ? NaCH3COO (aq) + CO2 (g) + H2O (l)
Solution
It is a molecular process involving the exchange of bonds between the two reacting
chemical species, which results in the creation of products with similar or identical bonding
affiliations. This is represented by the general reaction scheme: AX + BY ? BX + AY These
che.
Helium contains a 1s^2 orbital. .pdf
Helium contains a 1s^2 orbital.
Solution
Helium contains a 1s^2 orbital..
From the LCAO method The overlap of the 1s AO on.pdf
From the LCAO method: The overlap of the 1s AO on one H atom with the is AO
on a second gives one bonding MO (s) at lower energy to the constituent AOs and one
antibonding MO (s*) at higher energy. Each MO can hold 2 e-. H2^- has 3e- and so the MO
\"scheme\" is s(2e-) s*(1e-) Bond Order = ½[S (bonding e-) - S (antibonding e-)] = ½[2-1] = 0.5
so H2^2- is predicted to be bonding. When irradiated with UV light an e- in the s MO is
promoted to the s*: s(2e-) s*(1e-) ? h? ? s(1e-) s*(2e-) ? dissociation The bond order of the
excited state is formally ½[1-2] = -0.5 which is repulsive: the species flies apart into H^- and H.
(H atom not a period). You have to look at an MO diagram for O2; if you do that, focusing on
the p-based orbitals, you\'ll see that there are 6 bonding electrons (2 in the p-sigma orbital, and 4
in the p-pi orbitals), and two electrons in the p-pi* (one in each). Thus there are six bonding
electrons and two antibonding electrons, so the net is four bonding electrons. Since it takes two
bonding electrons to make a bond, the bond order is 2 for O2. If you take away one of the
antibonding electrons, now you have a net of five bonding electrons, which - when divided by 2 -
gives you a bond order of 2.5. Because you\'ve taken away one electron from neutral O2, the
charge will be +1.
Solution
From the LCAO method: The overlap of the 1s AO on one H atom with the is AO
on a second gives one bonding MO (s) at lower energy to the constituent AOs and one
antibonding MO (s*) at higher energy. Each MO can hold 2 e-. H2^- has 3e- and so the MO
\"scheme\" is s(2e-) s*(1e-) Bond Order = ½[S (bonding e-) - S (antibonding e-)] = ½[2-1] = 0.5
so H2^2- is predicted to be bonding. When irradiated with UV light an e- in the s MO is
promoted to the s*: s(2e-) s*(1e-) ? h? ? s(1e-) s*(2e-) ? dissociation The bond order of the
excited state is formally ½[1-2] = -0.5 which is repulsive: the species flies apart into H^- and H.
(H atom not a period). You have to look at an MO diagram for O2; if you do that, focusing on
the p-based orbitals, you\'ll see that there are 6 bonding electrons (2 in the p-sigma orbital, and 4
in the p-pi orbitals), and two electrons in the p-pi* (one in each). Thus there are six bonding
electrons and two antibonding electrons, so the net is four bonding electrons. Since it takes two
bonding electrons to make a bond, the bond order is 2 for O2. If you take away one of the
antibonding electrons, now you have a net of five bonding electrons, which - when divided by 2 -
gives you a bond order of 2.5. Because you\'ve taken away one electron from neutral O2, the
charge will be +1..
Ecell=E(nought) -RT(2F)ln[Mg2+][Zn2+] .pdf
Ecell=E(nought) -RT/(2F)*ln[Mg2+]/[Zn2+]
Solution
Ecell=E(nought) -RT/(2F)*ln[Mg2+]/[Zn2+].
Cis-trans isomers occur because it is impossible .pdf
Cis-trans isomers occur because it is impossible to rotate the double bond without
breaking it. Thus, isomers that are related by \"rotation\" about the double bond are actually
separate compounds - cis/trans isomers. In the example you have drawn, keep the -CH2CH3
group and the right-hand H in place and reverse the position of the -CH2CH2CH3 group and the
other H (so that the H\'s are on \"opposite\" sides of the double bond). This is the trans isomer of
the compound you drew (you have the cis isomer). Now, imagine that instead of the
CH2CH2CH3 group you had another H. In that case, switching the position of the two H\'s
would result in the same compound, and cis-trans isomers would not be possible. In general,
cis/trans isomers are possible only if each carbon that is part of the double bond is bonded to two
DIFFERENT groups. This is only true for I and III. In II, the right-hand carbon of the double
bond is bonded to two H\'s. And in IV, the left hand carbon of the double bond is bonded to two -
CH3 groups. Thus neither of these has cis-trans isomers. So the correct answer is (b), I and III.
Solution
Cis-trans isomers occur because it is impossible to rotate the double bond without
breaking it. Thus, isomers that are related by \"rotation\" about the double bond are actually
separate compounds - cis/trans isomers. In the example you have drawn, keep the -CH2CH3
group and the right-hand H in place and reverse the position of the -CH2CH2CH3 group and the
other H (so that the H\'s are on \"opposite\" sides of the double bond). This is the trans isomer of
the compound you drew (you have the cis isomer). Now, imagine that instead of the
CH2CH2CH3 group you had another H. In that case, switching the position of the two H\'s
would result in the same compound, and cis-trans isomers would not be possible. In general,
cis/trans isomers are possible only if each carbon that is part of the double bond is bonded to two
DIFFERENT groups. This is only true for I and III. In II, the right-hand carbon of the double
bond is bonded to two H\'s. And in IV, the left hand carbon of the double bond is bonded to two -
CH3 groups. Thus neither of these has cis-trans isomers. So the correct answer is (b), I and III..
When a heterozygote (Aa) is not an exact intermediate between the tw.pdf
When a heterozygote (Aa) is not an exact intermediate between the two homozygotes (AA and
aa), then not all of the genetic variance in the population can be accounted for by differences in
the average effect of the A and a alleles.
In this case, the total genetic variance of the population can be subdivided into two components:
Additive Genetic Variance (sa2): Genetic variation attributed to average differences between
different allelic characters.
Dominance Genetic Variance (sd2): Variance due to heterozygotes not being exact midpoints of
homozygote parents.
So that,
Sg2 = Sa2 + Sd2
And now, total phenotypic variance can be rewritten as:
Sp2 = Se2 + Sg2 = Se2 + Sa2 + Sd2
From this, we can define a new kind of heritability:
Heritability in the narrow sense (h2):Proportion of phenotypic variance due to additive genetic
variance alone
h2 = Sa2 / Sp2 = Sa2 / Se2 + Sg2 = Sa2 / Se2 + Sd2 + Sa2
The greater h2 is for a population, the greater the fraction of the difference between selected
parents and the population as a whole that will be preserved in the offspring of those parents.
______________________________________________________________
To see why it is h2 that matters for response to selection, consider an extreme case:
2 homozygotes are equal in phenotype, say with a value of 20. (AA=aa=20)
But the heterozygote is overdominant, maybe with a value of 24. (Aa=24)
So for this population, there is only dominance variance, and no additive genetic variance
because there is no average difference between the carriers of a alleles and the carriers of A
alleles.
Now suppose that the population mates randomly and the genotype proportions are:
If only individuals with the highest values were selected to breed, all parents would be
heterozygotes.
Offspring of heterozygotes would exactly reproduce the 1:2:1 distribution of genotypes seen in
the parental generation.
Thus, there would be no change in genetic composition of the F1 generation, despite the fact
that there is genetic variation in the population.
So, selection proves to be ineffective when all variance is due to dominance and there is no
additive variance.
It is important to consider that dominance variance arises from more than just the deviation of
heterozygotes from the exact midpoint of homozygotes.
Dominance variance (sd2) is considered to be any genetic variation that cannot be explained by
average allelic differences, or additive genetic variance (sa2)
For example, if a trait is affected by multiple loci then any epistatic interactions between the loci
will appear as variance not associated with additive variance.
In theory, this interaction variance (si2) could be separated from dominance variance (sd2).
In practice, however, it is not possible to achieve accurate measures of separating these two
parameters so all nonadditive variance is attributed to dominance variance (sd2).
_____________________________________________________________________________
________________
Important Mess.
Volume of water = masssolubility of calcium phosphate= 13.41 x 1.pdf
Volume of water = mass/solubility of calcium phosphate
= 1/3.41 x 10-5
= 2.93 x 104 L
Solution
Volume of water = mass/solubility of calcium phosphate
= 1/3.41 x 10-5
= 2.93 x 104 L.
Astatine is a halogen. Column VII(7) on the perio.pdf
Astatine is a halogen. Column VII(7) on the periodic table. Therefore, the elements
that would have similar properties to it are the other halogens: Iodine(I), Bromine(Br),
Chlorine(Cl), Fluorine(F)
Solution
Astatine is a halogen. Column VII(7) on the periodic table. Therefore, the elements
that would have similar properties to it are the other halogens: Iodine(I), Bromine(Br),
Chlorine(Cl), Fluorine(F).
The use of a generic data type is preferred over using Object as a g.pdf
The use of a generic data type is preferred over using Object as a general class in a collection
because it ensures that all the members of the collection are objects related by inheritance. Using
generic data type, the immediate benefit can be obtained without derivation from a base
collection and implementation of type specific members
Solution
The use of a generic data type is preferred over using Object as a general class in a collection
because it ensures that all the members of the collection are objects related by inheritance. Using
generic data type, the immediate benefit can be obtained without derivation from a base
collection and implementation of type specific members.
The Hofmann rearrangement is the organic reaction of a primary amide.pdf
The Hofmann rearrangement is the organic reaction of a primary amide to a primary amine with
one fewer carbon atom.
The reaction is named after its dicoverer.
Solution
The Hofmann rearrangement is the organic reaction of a primary amide to a primary amine with
one fewer carbon atom.
The reaction is named after its dicoverer..
RainFall.java public class RainFall { private double months.pdf
RainFall.java
public class RainFall {
private double months[];
String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public RainFall(double d[]){
months = d;
}
public void displayTotalRainFall(){
double total = 0;
for(int i=0; i months[i]){
min = months[i];
minIndex = i;
}
}
System.out.println(\"The minimum rainfall is :\"+min);
System.out.println(\"The minimum rainfall month is :\"+monthStr[minIndex]);
}
}
RainFallTest.java
import java.util.Scanner;
public class RainFallTest {
static String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public static void main(String[] args) {
double month[] = new double[12];
Scanner scan = new Scanner(System.in);
for(int i=0; i
Solution
RainFall.java
public class RainFall {
private double months[];
String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public RainFall(double d[]){
months = d;
}
public void displayTotalRainFall(){
double total = 0;
for(int i=0; i months[i]){
min = months[i];
minIndex = i;
}
}
System.out.println(\"The minimum rainfall is :\"+min);
System.out.println(\"The minimum rainfall month is :\"+monthStr[minIndex]);
}
}
RainFallTest.java
import java.util.Scanner;
public class RainFallTest {
static String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public static void main(String[] args) {
double month[] = new double[12];
Scanner scan = new Scanner(System.in);
for(int i=0; i.
Proximal convoluted tubule performs absorption of majority of water .pdf
Proximal convoluted tubule performs absorption of majority of water and solutes in the kidney.
It is lined by cuboidal epithelium.
Urethral orifice is the region which is the external opening of the urethra.
Solution
Proximal convoluted tubule performs absorption of majority of water and solutes in the kidney.
It is lined by cuboidal epithelium.
Urethral orifice is the region which is the external opening of the urethra..
Please find my implementationpublic KeyedItem remove() { DO.pdf
Please find my implementation:
public KeyedItem remove()
{
//DO THIS
//remove the smallest item
// since Linked List is in sorted order, so head is the samllest element
if(head == null)
return null;
// return head element and move head one step forward
KeyedItem item = head.getItem();
head = head.getNext();
return item;
}
private Node locateNodeAdd(KeyedItem item)
{
//DO THIS
//find the insertion location (remember FIFO for duplicates)
Node curr = head;
Node prev = null;
while(curr != null){
if((current.getItem().getKey()).compareTo(item.getKey) >= 0){
return prev;
}
prev = curr;
curr = curr.getNext();
}
return prev;
}
Solution
Please find my implementation:
public KeyedItem remove()
{
//DO THIS
//remove the smallest item
// since Linked List is in sorted order, so head is the samllest element
if(head == null)
return null;
// return head element and move head one step forward
KeyedItem item = head.getItem();
head = head.getNext();
return item;
}
private Node locateNodeAdd(KeyedItem item)
{
//DO THIS
//find the insertion location (remember FIFO for duplicates)
Node curr = head;
Node prev = null;
while(curr != null){
if((current.getItem().getKey()).compareTo(item.getKey) >= 0){
return prev;
}
prev = curr;
curr = curr.getNext();
}
return prev;
}.
Oxidation means loss of electrons.Metals are electropositive and l.pdf
Oxidation means loss of electrons.
Metals are electropositive and lose electrons easily to form positively charged ions with stable
octet structures, thus they tend to be oxidized.
Reduction means gain of electrons.
Non-metals are electronegative and gain electrons easily to form negatively charged ions with
stable octet structures, thus they tend to be reduced.
Solution
Oxidation means loss of electrons.
Metals are electropositive and lose electrons easily to form positively charged ions with stable
octet structures, thus they tend to be oxidized.
Reduction means gain of electrons.
Non-metals are electronegative and gain electrons easily to form negatively charged ions with
stable octet structures, thus they tend to be reduced..
Mutualism 1. Two organisms live together and both gain from that.pdf
Mutualism : 1. Two organisms live together and both gain from that association
Chemotrophs : 2. Use chemicals to produce their own food
Commensalism : 3. One organism benefits from the association and the other one is unaffected
Autotrophs : 4. Produce their own food
Photoautotrophs : 5. Use light to produce their own food
Heterotrophs : 6. Feed on others
Parasitism : 7. Affects others negatively
Solution
Mutualism : 1. Two organisms live together and both gain from that association
Chemotrophs : 2. Use chemicals to produce their own food
Commensalism : 3. One organism benefits from the association and the other one is unaffected
Autotrophs : 4. Produce their own food
Photoautotrophs : 5. Use light to produce their own food
Heterotrophs : 6. Feed on others
Parasitism : 7. Affects others negatively.
a) The area of a disk of radius 1 is Pi.We need the integral over .pdf
a) The area of a disk of radius 1 is Pi.
We need the integral over the unit disk of f(x,y) to be 1 so
int_(x^2+y^2<=1) f(x,y) dy dx = c*Pi = 1
So c=1/Pi
b)
Fr(r)=P(R <= r)
= P(X^2+Y^2 <= r^2)
= int_(x^2+y^2<=r^2) 1/Pi dydx
= Pir^2/pi ( since the disk of radius r^2 has area pir^2 )
= r^2
c) since x^2+y^2<=1 then -sqrt(1-x^2) <= y <= sqrt(1-x^2)
fX(x) = int(-sqrt(1-x^2)<=y<=sqrt(1+x^2)) f(x,y) dy = 2/Pi*sqrt(1-x^2) for -1<=x<=1
Since we have a clear symmetry of variables here then fY(y) =2/pi*sqrt(1-y^2)
Solution
a) The area of a disk of radius 1 is Pi.
We need the integral over the unit disk of f(x,y) to be 1 so
int_(x^2+y^2<=1) f(x,y) dy dx = c*Pi = 1
So c=1/Pi
b)
Fr(r)=P(R <= r)
= P(X^2+Y^2 <= r^2)
= int_(x^2+y^2<=r^2) 1/Pi dydx
= Pir^2/pi ( since the disk of radius r^2 has area pir^2 )
= r^2
c) since x^2+y^2<=1 then -sqrt(1-x^2) <= y <= sqrt(1-x^2)
fX(x) = int(-sqrt(1-x^2)<=y<=sqrt(1+x^2)) f(x,y) dy = 2/Pi*sqrt(1-x^2) for -1<=x<=1
Since we have a clear symmetry of variables here then fY(y) =2/pi*sqrt(1-y^2).
molality of ions in solution = vant Hoff factor x molality of NaCl.pdf
molality of ions in solution = van\'t Hoff factor x molality of NaCl
= 1.9 x 1.55 = 2.945 m
Freezing point of water - freezing point of NaCl solution
= Kf x molality of ions
freezing point of NaCl solution = 0 - 1.86 x 2.945 = -5.48 degrees C.
Solution
molality of ions in solution = van\'t Hoff factor x molality of NaCl
= 1.9 x 1.55 = 2.945 m
Freezing point of water - freezing point of NaCl solution
= Kf x molality of ions
freezing point of NaCl solution = 0 - 1.86 x 2.945 = -5.48 degrees C..
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Protectable subject matters, Protection in biotechnology, Protection of other biological materials, Ownership and period of protection
The French Revolution Class 9 Study Material pdf free download
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
More Related Content
More from anjaliselectionahd
moles NH4NO3 = 2.57 g 80.04 gmol=0.0321 moles H.pdf
moles NH4NO3 = 2.57 g /80.04 g/mol=0.0321 moles H2O = 4 x 0.0321 /2= 0.0642
moles O2 = 0.0321/2 =0.0161 moles N2 = 0.0321 total moles = 0.112 so p = 0.112 x 0.08206 x
520 K/ 4.50=1.06 atm
Solution
moles NH4NO3 = 2.57 g /80.04 g/mol=0.0321 moles H2O = 4 x 0.0321 /2= 0.0642
moles O2 = 0.0321/2 =0.0161 moles N2 = 0.0321 total moles = 0.112 so p = 0.112 x 0.08206 x
520 K/ 4.50=1.06 atm.
mole fraction of He = mole of He total mole now.pdf
mole fraction of He = mole of He/ total mole now mole of He = weight/M.wt = 2/4
= 0.5 mole of O2 = 5.99/32 = 0.187 total mole = 0.687 mole fraction of He = 0.5/0.687 = 0.727
Solution
mole fraction of He = mole of He/ total mole now mole of He = weight/M.wt = 2/4
= 0.5 mole of O2 = 5.99/32 = 0.187 total mole = 0.687 mole fraction of He = 0.5/0.687 = 0.727.
It is a molecular process involving the exchange .pdf
It is a molecular process involving the exchange of bonds between the two reacting
chemical species, which results in the creation of products with similar or identical bonding
affiliations. This is represented by the general reaction scheme: AX + BY ? BX + AY These
chemical species can either be ionic or covalent. When referring to precipitation reactions
between solutions of ions in inorganic chemistry, these were formerly referred to as double
displacement or double replacement reactions, and these terms are still encouraged. It seems that
the term double decomposition is more specifically used when at least one of the substances does
not dissolve in the liquor, as the ligand or ion exchange takes place in the solid state of the
reactant, i.e. AX(aq) + BY(s) ? AY(aq) + BX(s). Types: Neutralization A neutralization reaction
is a specific type of double displacement reaction. Neutralization occurs when an acid reacts with
an equal amount of a base. A neutralization reaction creates a solution of a salt and water. For
example, hydrochloric acid reacts with sodium hydroxide to produce salt and water: HCl (aq) +
NaOH (aq) ? NaCl (aq) + H2O (l) Aqueous metathesis (precipitation) Metathesis reactions can
occur between two inorganic salts when one product is insoluble in water, driving the reaction
forward. For example, the precipitation of silver chloride from a mixture of silver nitrate and
sodium chloride causes sodium nitrate to be left in solution: AgNO3 (aq) + NaCl (aq) ? AgCl (s)
+ NaNO3 (aq) The formation of an insoluble gas that bubbles out of the solution, or a molecular
compound such as water, also drives the reaction to completion. Therefore, a solubility chart (or
general knowledge of solubility rules) can be used to predict whether two aqueous solutions will
react. HSAB theory can also be used to predict the products of a metathesis reaction. Aqueous
metathesis (double decomposition) The reactants need not to be dissolved for metathesis
reactions to take place. An example of this is the formation of barium thiocyanate when boiling a
mixture of copper(I)thiocyanate and barium hydroxide in water: Ba(OH)2 (s) + 2 CuCNS (s) ?
Ba(CNS)2 (aq) + 2CuOH (s) Acid and carbonates A subcategory of aqueous metathesis
reactions is the reaction of an acid with a carbonate or bicarbonate. Such a reaction always yields
carbonic acid as a product, which spontaneously decomposes into carbon dioxide and water. The
release of carbon dioxide gas from the reaction mixture drives the reaction to completion. For
example, a common, science-fair \"volcano\" reaction involves the reaction of acetic acid with
sodium bicarbonate: HCH3COO (aq) + NaHCO3 (s) ? NaCH3COO (aq) + CO2 (g) + H2O (l)
Solution
It is a molecular process involving the exchange of bonds between the two reacting
chemical species, which results in the creation of products with similar or identical bonding
affiliations. This is represented by the general reaction scheme: AX + BY ? BX + AY These
che.
Helium contains a 1s^2 orbital. .pdf
Helium contains a 1s^2 orbital.
Solution
Helium contains a 1s^2 orbital..
From the LCAO method The overlap of the 1s AO on.pdf
From the LCAO method: The overlap of the 1s AO on one H atom with the is AO
on a second gives one bonding MO (s) at lower energy to the constituent AOs and one
antibonding MO (s*) at higher energy. Each MO can hold 2 e-. H2^- has 3e- and so the MO
\"scheme\" is s(2e-) s*(1e-) Bond Order = ½[S (bonding e-) - S (antibonding e-)] = ½[2-1] = 0.5
so H2^2- is predicted to be bonding. When irradiated with UV light an e- in the s MO is
promoted to the s*: s(2e-) s*(1e-) ? h? ? s(1e-) s*(2e-) ? dissociation The bond order of the
excited state is formally ½[1-2] = -0.5 which is repulsive: the species flies apart into H^- and H.
(H atom not a period). You have to look at an MO diagram for O2; if you do that, focusing on
the p-based orbitals, you\'ll see that there are 6 bonding electrons (2 in the p-sigma orbital, and 4
in the p-pi orbitals), and two electrons in the p-pi* (one in each). Thus there are six bonding
electrons and two antibonding electrons, so the net is four bonding electrons. Since it takes two
bonding electrons to make a bond, the bond order is 2 for O2. If you take away one of the
antibonding electrons, now you have a net of five bonding electrons, which - when divided by 2 -
gives you a bond order of 2.5. Because you\'ve taken away one electron from neutral O2, the
charge will be +1.
Solution
From the LCAO method: The overlap of the 1s AO on one H atom with the is AO
on a second gives one bonding MO (s) at lower energy to the constituent AOs and one
antibonding MO (s*) at higher energy. Each MO can hold 2 e-. H2^- has 3e- and so the MO
\"scheme\" is s(2e-) s*(1e-) Bond Order = ½[S (bonding e-) - S (antibonding e-)] = ½[2-1] = 0.5
so H2^2- is predicted to be bonding. When irradiated with UV light an e- in the s MO is
promoted to the s*: s(2e-) s*(1e-) ? h? ? s(1e-) s*(2e-) ? dissociation The bond order of the
excited state is formally ½[1-2] = -0.5 which is repulsive: the species flies apart into H^- and H.
(H atom not a period). You have to look at an MO diagram for O2; if you do that, focusing on
the p-based orbitals, you\'ll see that there are 6 bonding electrons (2 in the p-sigma orbital, and 4
in the p-pi orbitals), and two electrons in the p-pi* (one in each). Thus there are six bonding
electrons and two antibonding electrons, so the net is four bonding electrons. Since it takes two
bonding electrons to make a bond, the bond order is 2 for O2. If you take away one of the
antibonding electrons, now you have a net of five bonding electrons, which - when divided by 2 -
gives you a bond order of 2.5. Because you\'ve taken away one electron from neutral O2, the
charge will be +1..
Ecell=E(nought) -RT(2F)ln[Mg2+][Zn2+] .pdf
Ecell=E(nought) -RT/(2F)*ln[Mg2+]/[Zn2+]
Solution
Ecell=E(nought) -RT/(2F)*ln[Mg2+]/[Zn2+].
Cis-trans isomers occur because it is impossible .pdf
Cis-trans isomers occur because it is impossible to rotate the double bond without
breaking it. Thus, isomers that are related by \"rotation\" about the double bond are actually
separate compounds - cis/trans isomers. In the example you have drawn, keep the -CH2CH3
group and the right-hand H in place and reverse the position of the -CH2CH2CH3 group and the
other H (so that the H\'s are on \"opposite\" sides of the double bond). This is the trans isomer of
the compound you drew (you have the cis isomer). Now, imagine that instead of the
CH2CH2CH3 group you had another H. In that case, switching the position of the two H\'s
would result in the same compound, and cis-trans isomers would not be possible. In general,
cis/trans isomers are possible only if each carbon that is part of the double bond is bonded to two
DIFFERENT groups. This is only true for I and III. In II, the right-hand carbon of the double
bond is bonded to two H\'s. And in IV, the left hand carbon of the double bond is bonded to two -
CH3 groups. Thus neither of these has cis-trans isomers. So the correct answer is (b), I and III.
Solution
Cis-trans isomers occur because it is impossible to rotate the double bond without
breaking it. Thus, isomers that are related by \"rotation\" about the double bond are actually
separate compounds - cis/trans isomers. In the example you have drawn, keep the -CH2CH3
group and the right-hand H in place and reverse the position of the -CH2CH2CH3 group and the
other H (so that the H\'s are on \"opposite\" sides of the double bond). This is the trans isomer of
the compound you drew (you have the cis isomer). Now, imagine that instead of the
CH2CH2CH3 group you had another H. In that case, switching the position of the two H\'s
would result in the same compound, and cis-trans isomers would not be possible. In general,
cis/trans isomers are possible only if each carbon that is part of the double bond is bonded to two
DIFFERENT groups. This is only true for I and III. In II, the right-hand carbon of the double
bond is bonded to two H\'s. And in IV, the left hand carbon of the double bond is bonded to two -
CH3 groups. Thus neither of these has cis-trans isomers. So the correct answer is (b), I and III..
When a heterozygote (Aa) is not an exact intermediate between the tw.pdf
When a heterozygote (Aa) is not an exact intermediate between the two homozygotes (AA and
aa), then not all of the genetic variance in the population can be accounted for by differences in
the average effect of the A and a alleles.
In this case, the total genetic variance of the population can be subdivided into two components:
Additive Genetic Variance (sa2): Genetic variation attributed to average differences between
different allelic characters.
Dominance Genetic Variance (sd2): Variance due to heterozygotes not being exact midpoints of
homozygote parents.
So that,
Sg2 = Sa2 + Sd2
And now, total phenotypic variance can be rewritten as:
Sp2 = Se2 + Sg2 = Se2 + Sa2 + Sd2
From this, we can define a new kind of heritability:
Heritability in the narrow sense (h2):Proportion of phenotypic variance due to additive genetic
variance alone
h2 = Sa2 / Sp2 = Sa2 / Se2 + Sg2 = Sa2 / Se2 + Sd2 + Sa2
The greater h2 is for a population, the greater the fraction of the difference between selected
parents and the population as a whole that will be preserved in the offspring of those parents.
______________________________________________________________
To see why it is h2 that matters for response to selection, consider an extreme case:
2 homozygotes are equal in phenotype, say with a value of 20. (AA=aa=20)
But the heterozygote is overdominant, maybe with a value of 24. (Aa=24)
So for this population, there is only dominance variance, and no additive genetic variance
because there is no average difference between the carriers of a alleles and the carriers of A
alleles.
Now suppose that the population mates randomly and the genotype proportions are:
If only individuals with the highest values were selected to breed, all parents would be
heterozygotes.
Offspring of heterozygotes would exactly reproduce the 1:2:1 distribution of genotypes seen in
the parental generation.
Thus, there would be no change in genetic composition of the F1 generation, despite the fact
that there is genetic variation in the population.
So, selection proves to be ineffective when all variance is due to dominance and there is no
additive variance.
It is important to consider that dominance variance arises from more than just the deviation of
heterozygotes from the exact midpoint of homozygotes.
Dominance variance (sd2) is considered to be any genetic variation that cannot be explained by
average allelic differences, or additive genetic variance (sa2)
For example, if a trait is affected by multiple loci then any epistatic interactions between the loci
will appear as variance not associated with additive variance.
In theory, this interaction variance (si2) could be separated from dominance variance (sd2).
In practice, however, it is not possible to achieve accurate measures of separating these two
parameters so all nonadditive variance is attributed to dominance variance (sd2).
_____________________________________________________________________________
________________
Important Mess.
Volume of water = masssolubility of calcium phosphate= 13.41 x 1.pdf
Volume of water = mass/solubility of calcium phosphate
= 1/3.41 x 10-5
= 2.93 x 104 L
Solution
Volume of water = mass/solubility of calcium phosphate
= 1/3.41 x 10-5
= 2.93 x 104 L.
Astatine is a halogen. Column VII(7) on the perio.pdf
Astatine is a halogen. Column VII(7) on the periodic table. Therefore, the elements
that would have similar properties to it are the other halogens: Iodine(I), Bromine(Br),
Chlorine(Cl), Fluorine(F)
Solution
Astatine is a halogen. Column VII(7) on the periodic table. Therefore, the elements
that would have similar properties to it are the other halogens: Iodine(I), Bromine(Br),
Chlorine(Cl), Fluorine(F).
The use of a generic data type is preferred over using Object as a g.pdf
The use of a generic data type is preferred over using Object as a general class in a collection
because it ensures that all the members of the collection are objects related by inheritance. Using
generic data type, the immediate benefit can be obtained without derivation from a base
collection and implementation of type specific members
Solution
The use of a generic data type is preferred over using Object as a general class in a collection
because it ensures that all the members of the collection are objects related by inheritance. Using
generic data type, the immediate benefit can be obtained without derivation from a base
collection and implementation of type specific members.
The Hofmann rearrangement is the organic reaction of a primary amide.pdf
The Hofmann rearrangement is the organic reaction of a primary amide to a primary amine with
one fewer carbon atom.
The reaction is named after its dicoverer.
Solution
The Hofmann rearrangement is the organic reaction of a primary amide to a primary amine with
one fewer carbon atom.
The reaction is named after its dicoverer..
RainFall.java public class RainFall { private double months.pdf
RainFall.java
public class RainFall {
private double months[];
String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public RainFall(double d[]){
months = d;
}
public void displayTotalRainFall(){
double total = 0;
for(int i=0; i months[i]){
min = months[i];
minIndex = i;
}
}
System.out.println(\"The minimum rainfall is :\"+min);
System.out.println(\"The minimum rainfall month is :\"+monthStr[minIndex]);
}
}
RainFallTest.java
import java.util.Scanner;
public class RainFallTest {
static String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public static void main(String[] args) {
double month[] = new double[12];
Scanner scan = new Scanner(System.in);
for(int i=0; i
Solution
RainFall.java
public class RainFall {
private double months[];
String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public RainFall(double d[]){
months = d;
}
public void displayTotalRainFall(){
double total = 0;
for(int i=0; i months[i]){
min = months[i];
minIndex = i;
}
}
System.out.println(\"The minimum rainfall is :\"+min);
System.out.println(\"The minimum rainfall month is :\"+monthStr[minIndex]);
}
}
RainFallTest.java
import java.util.Scanner;
public class RainFallTest {
static String monthStr[] = {\"January\", \"Fabruary\", \"March\", \"April\", \"May\", \"June\",
\"July\", \"August\", \"September\",\"October\",\"November\",\"December\"};
public static void main(String[] args) {
double month[] = new double[12];
Scanner scan = new Scanner(System.in);
for(int i=0; i.
Proximal convoluted tubule performs absorption of majority of water .pdf
Proximal convoluted tubule performs absorption of majority of water and solutes in the kidney.
It is lined by cuboidal epithelium.
Urethral orifice is the region which is the external opening of the urethra.
Solution
Proximal convoluted tubule performs absorption of majority of water and solutes in the kidney.
It is lined by cuboidal epithelium.
Urethral orifice is the region which is the external opening of the urethra..
Please find my implementationpublic KeyedItem remove() { DO.pdf
Please find my implementation:
public KeyedItem remove()
{
//DO THIS
//remove the smallest item
// since Linked List is in sorted order, so head is the samllest element
if(head == null)
return null;
// return head element and move head one step forward
KeyedItem item = head.getItem();
head = head.getNext();
return item;
}
private Node locateNodeAdd(KeyedItem item)
{
//DO THIS
//find the insertion location (remember FIFO for duplicates)
Node curr = head;
Node prev = null;
while(curr != null){
if((current.getItem().getKey()).compareTo(item.getKey) >= 0){
return prev;
}
prev = curr;
curr = curr.getNext();
}
return prev;
}
Solution
Please find my implementation:
public KeyedItem remove()
{
//DO THIS
//remove the smallest item
// since Linked List is in sorted order, so head is the samllest element
if(head == null)
return null;
// return head element and move head one step forward
KeyedItem item = head.getItem();
head = head.getNext();
return item;
}
private Node locateNodeAdd(KeyedItem item)
{
//DO THIS
//find the insertion location (remember FIFO for duplicates)
Node curr = head;
Node prev = null;
while(curr != null){
if((current.getItem().getKey()).compareTo(item.getKey) >= 0){
return prev;
}
prev = curr;
curr = curr.getNext();
}
return prev;
}.
Oxidation means loss of electrons.Metals are electropositive and l.pdf
Oxidation means loss of electrons.
Metals are electropositive and lose electrons easily to form positively charged ions with stable
octet structures, thus they tend to be oxidized.
Reduction means gain of electrons.
Non-metals are electronegative and gain electrons easily to form negatively charged ions with
stable octet structures, thus they tend to be reduced.
Solution
Oxidation means loss of electrons.
Metals are electropositive and lose electrons easily to form positively charged ions with stable
octet structures, thus they tend to be oxidized.
Reduction means gain of electrons.
Non-metals are electronegative and gain electrons easily to form negatively charged ions with
stable octet structures, thus they tend to be reduced..
Mutualism 1. Two organisms live together and both gain from that.pdf
Mutualism : 1. Two organisms live together and both gain from that association
Chemotrophs : 2. Use chemicals to produce their own food
Commensalism : 3. One organism benefits from the association and the other one is unaffected
Autotrophs : 4. Produce their own food
Photoautotrophs : 5. Use light to produce their own food
Heterotrophs : 6. Feed on others
Parasitism : 7. Affects others negatively
Solution
Mutualism : 1. Two organisms live together and both gain from that association
Chemotrophs : 2. Use chemicals to produce their own food
Commensalism : 3. One organism benefits from the association and the other one is unaffected
Autotrophs : 4. Produce their own food
Photoautotrophs : 5. Use light to produce their own food
Heterotrophs : 6. Feed on others
Parasitism : 7. Affects others negatively.
a) The area of a disk of radius 1 is Pi.We need the integral over .pdf
a) The area of a disk of radius 1 is Pi.
We need the integral over the unit disk of f(x,y) to be 1 so
int_(x^2+y^2<=1) f(x,y) dy dx = c*Pi = 1
So c=1/Pi
b)
Fr(r)=P(R <= r)
= P(X^2+Y^2 <= r^2)
= int_(x^2+y^2<=r^2) 1/Pi dydx
= Pir^2/pi ( since the disk of radius r^2 has area pir^2 )
= r^2
c) since x^2+y^2<=1 then -sqrt(1-x^2) <= y <= sqrt(1-x^2)
fX(x) = int(-sqrt(1-x^2)<=y<=sqrt(1+x^2)) f(x,y) dy = 2/Pi*sqrt(1-x^2) for -1<=x<=1
Since we have a clear symmetry of variables here then fY(y) =2/pi*sqrt(1-y^2)
Solution
a) The area of a disk of radius 1 is Pi.
We need the integral over the unit disk of f(x,y) to be 1 so
int_(x^2+y^2<=1) f(x,y) dy dx = c*Pi = 1
So c=1/Pi
b)
Fr(r)=P(R <= r)
= P(X^2+Y^2 <= r^2)
= int_(x^2+y^2<=r^2) 1/Pi dydx
= Pir^2/pi ( since the disk of radius r^2 has area pir^2 )
= r^2
c) since x^2+y^2<=1 then -sqrt(1-x^2) <= y <= sqrt(1-x^2)
fX(x) = int(-sqrt(1-x^2)<=y<=sqrt(1+x^2)) f(x,y) dy = 2/Pi*sqrt(1-x^2) for -1<=x<=1
Since we have a clear symmetry of variables here then fY(y) =2/pi*sqrt(1-y^2).
molality of ions in solution = vant Hoff factor x molality of NaCl.pdf
molality of ions in solution = van\'t Hoff factor x molality of NaCl
= 1.9 x 1.55 = 2.945 m
Freezing point of water - freezing point of NaCl solution
= Kf x molality of ions
freezing point of NaCl solution = 0 - 1.86 x 2.945 = -5.48 degrees C.
Solution
molality of ions in solution = van\'t Hoff factor x molality of NaCl
= 1.9 x 1.55 = 2.945 m
Freezing point of water - freezing point of NaCl solution
= Kf x molality of ions
freezing point of NaCl solution = 0 - 1.86 x 2.945 = -5.48 degrees C..
More from anjaliselectionahd (20)
moles NH4NO3 = 2.57 g 80.04 gmol=0.0321 moles H.pdf
moles NH4NO3 = 2.57 g 80.04 gmol=0.0321 moles H.pdf
mole fraction of He = mole of He total mole now.pdf
mole fraction of He = mole of He total mole now.pdf
It is a molecular process involving the exchange .pdf
It is a molecular process involving the exchange .pdf
From the LCAO method The overlap of the 1s AO on.pdf
From the LCAO method The overlap of the 1s AO on.pdf
Cis-trans isomers occur because it is impossible .pdf
Cis-trans isomers occur because it is impossible .pdf
When a heterozygote (Aa) is not an exact intermediate between the tw.pdf
When a heterozygote (Aa) is not an exact intermediate between the tw.pdf
Volume of water = masssolubility of calcium phosphate= 13.41 x 1.pdf
Volume of water = masssolubility of calcium phosphate= 13.41 x 1.pdf
Astatine is a halogen. Column VII(7) on the perio.pdf
Astatine is a halogen. Column VII(7) on the perio.pdf
The use of a generic data type is preferred over using Object as a g.pdf
The use of a generic data type is preferred over using Object as a g.pdf
The Hofmann rearrangement is the organic reaction of a primary amide.pdf
The Hofmann rearrangement is the organic reaction of a primary amide.pdf
RainFall.java public class RainFall { private double months.pdf
RainFall.java public class RainFall { private double months.pdf
Proximal convoluted tubule performs absorption of majority of water .pdf
Proximal convoluted tubule performs absorption of majority of water .pdf
Please find my implementationpublic KeyedItem remove() { DO.pdf
Please find my implementationpublic KeyedItem remove() { DO.pdf
Oxidation means loss of electrons.Metals are electropositive and l.pdf
Oxidation means loss of electrons.Metals are electropositive and l.pdf
Mutualism 1. Two organisms live together and both gain from that.pdf
Mutualism 1. Two organisms live together and both gain from that.pdf
a) The area of a disk of radius 1 is Pi.We need the integral over .pdf
a) The area of a disk of radius 1 is Pi.We need the integral over .pdf
molality of ions in solution = vant Hoff factor x molality of NaCl.pdf
molality of ions in solution = vant Hoff factor x molality of NaCl.pdf
Recently uploaded
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Protectable subject matters, Protection in biotechnology, Protection of other biological materials, Ownership and period of protection
The French Revolution Class 9 Study Material pdf free download
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Advantages and Disadvantages of CMS from an SEO Perspective
Advantages and Disadvantages of CMS from an SEO Perspective
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Embracing GenAI - A Strategic Imperative
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcChapter -12, Antibiotics (One Page Notes).pdf
This is a notes for the D.Pharm students and related to the antibiotic drugs.
MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
mass media studies
CBSE
Full Book
for class 11th
Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Best Digital Marketing Institute In NOIDA
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is prepared for master's students (MIFB & MIBS) UUM. May it be useful to all.Recently uploaded (20)
"Protectable subject matters, Protection in biotechnology, Protection of othe...
"Protectable subject matters, Protection in biotechnology, Protection of othe...
The French Revolution Class 9 Study Material pdf free download
The French Revolution Class 9 Study Material pdf free download
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Advantages and Disadvantages of CMS from an SEO Perspective
Advantages and Disadvantages of CMS from an SEO Perspective
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk - How can education support child empowerment.pptx
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Multithreading_in_C++ - std::thread, race condition
Multithreading_in_C++ - std::thread, race condition
MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
MASS MEDIA STUDIES-835-CLASS XI Resource Material.pdf
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptx
TLC is used to separate the compounds.the benzoic.pdf
- 1. TLC is used to separate the compounds.the benzoic acid and methanol are more polar so these have small rf value.so we can easyly separate the ester Solution TLC is used to separate the compounds.the benzoic acid and methanol are more polar so these have small rf value.so we can easyly separate the ester