I used card and bamboo to construct a flag for a noticeboard so that it would not move around. All other items were made on a computer and printed, except for a paw print and logo. A4 paper was used for all notices to link them with the overall color scheme. The bamboo stick was used for the flag because flags are normally made of wood and other materials would be too heavy. The noticeboard was attached to lockers by drilling a plank of wood to the back, threading rope through holes in the plank and adding another rope tied to a stage weight to allow the board to hang at the proper height while keeping it sturdy.

1. I used card to make
the flag so that it
doesn’t move
around or flop
everywhere.
I just used paper to make all of these. Apart from
the “WHAT TEAM?!” paw print and wildcats logo I
just made them all on the computer and printed
them off. For explanation see pervious justification
on ‘GC3: Idea Justification’.
For the noticeboard I used A4 paper for every notice but used the same colours to link with the
colour scheme for the rest of the set
I used a bamboo stick
to make the stick of
the flag and painted
it black. The reason
why I used a bamboo
stick is because flags
are normally made
with wood for the
stick and if I was to
use another material
like metal it would be
too heavy to stick on
the noticeboard.
I used
bold
writing
to attract
the
audience
and so
they can
read it
from a
far.

2. How we attached it to the lockers.
• First I drilled a plank of wood to the back of it.
• I drilled two holes in the plank of wood.
• Then I thread rope through the holes and noted it
in the middle.
• After that I added another piece of rope to trail
down the back of the lockers and attached it to a
stage weight so the noticeboard would fall down.
I keep adjusting the rope to the right size to get
the noticeboard at the right height and to keep it
sturdy.