U-QASAR Project Presentation at IoS Plenary Brussels 2012U-QASAR
U-QASAR is an EU-funded Project. The main objective of U-QASAR is to create a flexible Quality Assurance, Control and Measurement Methodology to measure the quality of Internet-related software development projects and their resulting products.
Aquesta presentació forma part de l'Application Jukebox User Day, celebrat el 18-11-15 al CSUC.
La jornada ha tractat les novetats i plans de futur per Jukebox i ha mostrat en detall el producte Software2 Hub, que dóna solució a la construcció de mercats d'aplicacions.
MEASURE
Measuring Software Engineering
https://itea3.org/project/measure.html
The goal of the project is to increase the quality and efficiency as well as reduce the costs and time-to-market of software engineering in Europe. By implementing a comprehensive set of tools for automated and continuous measurement, this project provides a toolset for future projects to properly measure their impact. More importantly, it opens a new field for innovation. The real innovation will be in the advanced analytics of the measurement data enabled by the project.
The goal of the project is to increase the quality and efficiency, and lower the costs and time-to-market of software engineering in Europe. To reach this ambitious goal, the project will iteratively and incrementally:
1) Define better metrics and develop methods and tools for automated, precise, and unbiased measurement of software engineering activities and artefacts.
2) Develop methods and tools for analysing the big data produced by the continuous measurement to enable continuous improvement of performance.
3) Validate the developed metrics and measurement tools by integrating them into software development environments and processes of the industrial partners, and iteratively improve them based on the feedback gathered from the industry.
4) Validate the developed analysis tools by analysing the data gathered from the industrial partners and measuring the impact of the improvements suggested by the analysis tools. A practical example of a measurement-based suggestion could be pointing out an area of source code not covered by automated test suite and generating new targeted test automation scripts based on manual test cases recorded during continuous measurement.
5) Support management decision-making by visualizing the results of continuous measurement at targeted level of abstraction, i.e., providing different visualization or even completely different metrics for developers and managers.
In addition to the competitive advantage gained with the better quality and lower costs of software development in general, the project consortium includes commercial tool vendors and open source tool developers aiming to the new market segment of advanced analytics. Advanced analytics is the fastest-growing segment of the business intelligence (BI) and analytics software market was over $1 billion already in 2013 .
MEASURE’s Structured Metrics Meta-Model Module at TAROT 2016Alessandra Bagnato
The demand for cost-effectiveness and higher quality is increasing due to the competition in software industry and complexity of the developed systems.
Due to the modern iterative development practices and new tools & methods the traditional metrics and evaluation methods are not sufficient anymore.
To allow continuous monitoring and improvement, the measurement has to be automated and integrated into the process & tooling landscape.
The MEASURE project will define new metrics, methods and tools for measuring the effectiveness and efficiency of industrial software engineering processes and will provide cross metrics feedback.
Simpda 2014 - A living story: measuring quality of developments in a large in...SpagoWorld
The presentation supported the speech by Gabriele Ruffatti (founder of the SpagoWorld initiative) at SIMPDA 2014 (Milan, Italy - November 19-21, 2015). The presentation focuses on the innovative approach named Productivity Intelligence supported by Spago4Q - the open source analytic of SpagoBI suite for Quality and Performance Improvement- that allows companies and organizations to effectively monitor performances, improve quality practices and achieve higher capability levels. www.spagoworld.org
U-QASAR Project Presentation at IoS Plenary Brussels 2012U-QASAR
U-QASAR is an EU-funded Project. The main objective of U-QASAR is to create a flexible Quality Assurance, Control and Measurement Methodology to measure the quality of Internet-related software development projects and their resulting products.
Aquesta presentació forma part de l'Application Jukebox User Day, celebrat el 18-11-15 al CSUC.
La jornada ha tractat les novetats i plans de futur per Jukebox i ha mostrat en detall el producte Software2 Hub, que dóna solució a la construcció de mercats d'aplicacions.
MEASURE
Measuring Software Engineering
https://itea3.org/project/measure.html
The goal of the project is to increase the quality and efficiency as well as reduce the costs and time-to-market of software engineering in Europe. By implementing a comprehensive set of tools for automated and continuous measurement, this project provides a toolset for future projects to properly measure their impact. More importantly, it opens a new field for innovation. The real innovation will be in the advanced analytics of the measurement data enabled by the project.
The goal of the project is to increase the quality and efficiency, and lower the costs and time-to-market of software engineering in Europe. To reach this ambitious goal, the project will iteratively and incrementally:
1) Define better metrics and develop methods and tools for automated, precise, and unbiased measurement of software engineering activities and artefacts.
2) Develop methods and tools for analysing the big data produced by the continuous measurement to enable continuous improvement of performance.
3) Validate the developed metrics and measurement tools by integrating them into software development environments and processes of the industrial partners, and iteratively improve them based on the feedback gathered from the industry.
4) Validate the developed analysis tools by analysing the data gathered from the industrial partners and measuring the impact of the improvements suggested by the analysis tools. A practical example of a measurement-based suggestion could be pointing out an area of source code not covered by automated test suite and generating new targeted test automation scripts based on manual test cases recorded during continuous measurement.
5) Support management decision-making by visualizing the results of continuous measurement at targeted level of abstraction, i.e., providing different visualization or even completely different metrics for developers and managers.
In addition to the competitive advantage gained with the better quality and lower costs of software development in general, the project consortium includes commercial tool vendors and open source tool developers aiming to the new market segment of advanced analytics. Advanced analytics is the fastest-growing segment of the business intelligence (BI) and analytics software market was over $1 billion already in 2013 .
MEASURE’s Structured Metrics Meta-Model Module at TAROT 2016Alessandra Bagnato
The demand for cost-effectiveness and higher quality is increasing due to the competition in software industry and complexity of the developed systems.
Due to the modern iterative development practices and new tools & methods the traditional metrics and evaluation methods are not sufficient anymore.
To allow continuous monitoring and improvement, the measurement has to be automated and integrated into the process & tooling landscape.
The MEASURE project will define new metrics, methods and tools for measuring the effectiveness and efficiency of industrial software engineering processes and will provide cross metrics feedback.
Simpda 2014 - A living story: measuring quality of developments in a large in...SpagoWorld
The presentation supported the speech by Gabriele Ruffatti (founder of the SpagoWorld initiative) at SIMPDA 2014 (Milan, Italy - November 19-21, 2015). The presentation focuses on the innovative approach named Productivity Intelligence supported by Spago4Q - the open source analytic of SpagoBI suite for Quality and Performance Improvement- that allows companies and organizations to effectively monitor performances, improve quality practices and achieve higher capability levels. www.spagoworld.org
This is the Dissertation Part-I in support of my intended research work. It has presentation in support of my research methodology, timelines and expected results
A CASE Lab Report - Project File on "ATM - Banking System"joyousbharat
A CASE Lab Report - Project File on "ATM - Banking System"
The software to be designed will control a simulated automated teller machine
(ATM) having a magnetic stripe reader for reading an ATM card, a keyboard and
display for interaction with the customer, a slot for depositing envelopes, a
dispenser for cash (in multiples of $20), a printer for printing customer receipts, and
a key-operated switch to allow an operator to start or stop the machine. The ATM
will communicate with the bank's computer over an appropriate communication
link. (The software on the latter is not part of the requirements for this problem.)
Metrics Monitoring Is So Critical - What's Your Best Approach? Wavefront
Metrics monitoring is so critical for modern cloud applications. But can you do it with APM, with a log monitor, or with a specialized metrics platform? Open source or commercial? How are SaaS leaders monitoring their environments with metrics today?
Learn about unified metrics monitoring with real-time analytics, and why it’s the preferred methodology for assuring cloud application environments.
There are several approaches to implementing a metrics-monitoring platform. Depending on where you are on the metrics maturity curve, some platforms are better than others. Learn how to pick the approach that's best for you.
Presentation of Spago4Q, the free/open source platform to measure, analyse and monitor the Quality of products, processes and services, managed and supported by Engineering Group, an IT global player and italy's largest operator in the IT services market.
http://www.spago4q.org/
What is platform as a product? Clues from Team Topologies - Puppetize 2020 - ...Matthew Skelton
Savvy organisations are discovering the value of treating their internal platforms as products. But what does it mean to treat a “platform as a product”? What benefits does this give, and why would an organisation adopt this approach?
In this talk, [Matthew Skelton] [Manuel Pais], co-author of the book Team Topologies, explains why the platform-as-product approach can be a game-changer for organisations building and running software-enabled products and services. Using ideas & patterns from Team Topologies - including Thinnest Viable Platform, team cognitive load, and the evolutionary team interaction modes - [Matthew] [Manuel] explains how organisations like adidas and Uswitch have successfully used the platform-as-product model to accelerate and simplify the delivery of software at scale.
Rcose challenges and benefits from using software analytics in softeamAlessandra Bagnato
Challenges and Benefits from Using Software Analytics in Softeam
RCoSE 2020
6th International Workshop on Rapid Continuous Software Engineering
July 1, 2020
In conjunction with ICSE 2020, Seoul, South Korea
This webinar is going to cover what is a digital twin and how all stakeholders can benefit from their functionality. You will learn how model-based systems engineering enables digital engineering. Your host will discuss use cases, a realistic look at digital engineering and digital twins, and how you can use Innoslate to get started.
The Agenda
Here's what we're covering.
What is a Digital Twin
Benefits of Digital Twin
The Digital Engineering Path Enabled by MBSE
AR + MBSE Software
A More Realistic Digital Twin
Getting You Started with Digital Twins
Question Answer Session
Louise Anderson's presentation at the October 2014 INCOSE Colorado Front Range Chapter Meeting, held at the Laboratory for Atmospheric and Space Physics (LASP), University of Colorado Boulder.
Louise is the Systems Engineering Product Owner (Inventory & Production) at DigitalGlobe; Lead for the INCOSE Space Systems Working Group (SSWG) CubeSat Challenge Team
Modelling a CPS Swarm System: A Simple Case Study
The CPSwarm workbench is a toolchain that facilitates the entire design process of swarms of CPS including
modelling, design, optimization, simulation and deployment. This paper highlights part of the work of the
CPSwarm workbench in the context of the CPSwarm H2020 project. In particular, the CPSwarm workbench
allows to create a generic swarm library that can be customized by developers to design new swarm environments,
new swarm members and new swarm goals. This paper shows an application of the initial CPSwarm
workbench by the example of a reference problem called EmergencyExit. In this example a swarm of robots
needs to find an exit in an unmapped environment and leave this room through the exit as soon as possible.
The example problem is further used to show the integration of Modelio, a UML/SysML modelling tool, and
FREVO, an optimization tool in the CPSwarm workbench
This is the Dissertation Part-I in support of my intended research work. It has presentation in support of my research methodology, timelines and expected results
A CASE Lab Report - Project File on "ATM - Banking System"joyousbharat
A CASE Lab Report - Project File on "ATM - Banking System"
The software to be designed will control a simulated automated teller machine
(ATM) having a magnetic stripe reader for reading an ATM card, a keyboard and
display for interaction with the customer, a slot for depositing envelopes, a
dispenser for cash (in multiples of $20), a printer for printing customer receipts, and
a key-operated switch to allow an operator to start or stop the machine. The ATM
will communicate with the bank's computer over an appropriate communication
link. (The software on the latter is not part of the requirements for this problem.)
Metrics Monitoring Is So Critical - What's Your Best Approach? Wavefront
Metrics monitoring is so critical for modern cloud applications. But can you do it with APM, with a log monitor, or with a specialized metrics platform? Open source or commercial? How are SaaS leaders monitoring their environments with metrics today?
Learn about unified metrics monitoring with real-time analytics, and why it’s the preferred methodology for assuring cloud application environments.
There are several approaches to implementing a metrics-monitoring platform. Depending on where you are on the metrics maturity curve, some platforms are better than others. Learn how to pick the approach that's best for you.
Presentation of Spago4Q, the free/open source platform to measure, analyse and monitor the Quality of products, processes and services, managed and supported by Engineering Group, an IT global player and italy's largest operator in the IT services market.
http://www.spago4q.org/
What is platform as a product? Clues from Team Topologies - Puppetize 2020 - ...Matthew Skelton
Savvy organisations are discovering the value of treating their internal platforms as products. But what does it mean to treat a “platform as a product”? What benefits does this give, and why would an organisation adopt this approach?
In this talk, [Matthew Skelton] [Manuel Pais], co-author of the book Team Topologies, explains why the platform-as-product approach can be a game-changer for organisations building and running software-enabled products and services. Using ideas & patterns from Team Topologies - including Thinnest Viable Platform, team cognitive load, and the evolutionary team interaction modes - [Matthew] [Manuel] explains how organisations like adidas and Uswitch have successfully used the platform-as-product model to accelerate and simplify the delivery of software at scale.
Rcose challenges and benefits from using software analytics in softeamAlessandra Bagnato
Challenges and Benefits from Using Software Analytics in Softeam
RCoSE 2020
6th International Workshop on Rapid Continuous Software Engineering
July 1, 2020
In conjunction with ICSE 2020, Seoul, South Korea
This webinar is going to cover what is a digital twin and how all stakeholders can benefit from their functionality. You will learn how model-based systems engineering enables digital engineering. Your host will discuss use cases, a realistic look at digital engineering and digital twins, and how you can use Innoslate to get started.
The Agenda
Here's what we're covering.
What is a Digital Twin
Benefits of Digital Twin
The Digital Engineering Path Enabled by MBSE
AR + MBSE Software
A More Realistic Digital Twin
Getting You Started with Digital Twins
Question Answer Session
Louise Anderson's presentation at the October 2014 INCOSE Colorado Front Range Chapter Meeting, held at the Laboratory for Atmospheric and Space Physics (LASP), University of Colorado Boulder.
Louise is the Systems Engineering Product Owner (Inventory & Production) at DigitalGlobe; Lead for the INCOSE Space Systems Working Group (SSWG) CubeSat Challenge Team
Similar to The MEASURE Project : Measuring Software Engineering (20)
Modelling a CPS Swarm System: A Simple Case Study
The CPSwarm workbench is a toolchain that facilitates the entire design process of swarms of CPS including
modelling, design, optimization, simulation and deployment. This paper highlights part of the work of the
CPSwarm workbench in the context of the CPSwarm H2020 project. In particular, the CPSwarm workbench
allows to create a generic swarm library that can be customized by developers to design new swarm environments,
new swarm members and new swarm goals. This paper shows an application of the initial CPSwarm
workbench by the example of a reference problem called EmergencyExit. In this example a swarm of robots
needs to find an exit in an unmapped environment and leave this room through the exit as soon as possible.
The example problem is further used to show the integration of Modelio, a UML/SysML modelling tool, and
FREVO, an optimization tool in the CPSwarm workbench
Cyber-physical systems Industrial applications in the CPSwarm ProjectAlessandra Bagnato
CPS and Cyber-Physical Systems of Systems (CPSoS) are increasingly playing the role of foundational building blocks for bringing adaptive intelligence to processes and environments, in several application domains ranging from Smart Mobility, to Smart Health, Smart Cities and Smart Production. Due to the
increasing pervasiveness of CPS, issues related to effective design of solutions, able to reach predefined goals flexibly, reliably and adapting to changing surrounding conditions, become challenging and worth of further investigation. While increasing the CPS adoption results in increasingly mature solutions for their development, a single, consistent, science of system integration for CPS has not yet been consolidated.
As a matter of fact, the increasing interactions amongst different
CPS are starting to generate unpredicted behaviours and emerging properties, often leading to unforeseen and/or undesired results. These interactions could become an advantage if they were explicitly managed, and accounted, since the early design stages. The CPSwarm project,
presented in this lecture, aims at tackling these kinds of challenges by easing development and integration of complex herds of heterogeneous CPS. Thanks to CPSwarm, systems designed through a combination of existing and emerging tools, will collaborate on the
basis of local policies and exhibit a collective behaviour capable of solving complex, real-world, problems. Three real-world use cases will demonstrate the validity of foundational assumptions of the presented approach as well as the viability of the developed tools and methodologies.
CPSwarm will demonstrate the viability of the proposed approach on 3 complimentary, yet di_erent, use cases targeted at: (a) swarms of (mixed) robotic vehicles (e.g. Unmanned Aerial Vehicles (UAV) and rovers), (b) automotive CPS systems for freight vehicles and (c) swarm logistics.
All scenarios are characterized by the presence of heterogeneous CPS interacting together and showing emerging behaviors difficult to predict with traditional approaches and will be presented in the lecture.
DE-CPS 2017 The INTO-CPS Cyber-Physical System Profile Alessandra BagnatoAlessandra Bagnato
The Modelio SysML/INTO-CPS module include an INTO-CPS/SysML profile which is organized around the following logical groups: block, type, instance, library and diagram. Only the block group is presented in this paper. The next two diagrams depict the block group. INTO-CPS profile specializes SysML Block concept into one sub-concept named “Component”, with is also specializes into four sub-concepts respectively named “System”, “Subsystem”, “Cyber”, and “Physical”.
Designing Swarms of Cyber-Physical Systems: The H2020 CPSwarm ProjectAlessandra Bagnato
CF 2017 - ACM International Conference on Computing Frontiers 2017
Alessandra Bagnato, Regina Krisztina Bíró, Dario Bonino, Claudio Pastrone, Wilfried Elmenreich, René Reiners, Melanie Schranz, Edin Arnautovic
Invite Paper
Cyber-Physical Systems (CPS) nd applications in a number of
large-scale, safety-critical domains e.g. transportation, smart cities,etc. As a matter of fact, the increasing interactions amongst dierent CPS are starting to generate unpredictable behaviors and emerging properties, often leading to unforeseen and/or undesired results.
Rather than being an unwanted byproduct, these interactions could, however, become an advantage if they were explicitly managed, and accounted, since the early design stages. The CPSwarm project, presented in this paper, aims at tackling these kinds of challenges by easing development and integration of complex herds of heterogeneous CPS. Thanks to CPSwarm, systems designed through a combination of existing and emerging tools, will collaborate on the basis of local policies and exhibit a collective behavior capable of solving complex, real-world, problems. Three real-world use cases
will demonstrate the validity of foundational assumptions of the
presented approach as well as the viability of the developed tools and methodologies.
H2020 CPSwarm Project at Dif2017 Exibition https://www.dif2017.org/exhibition...Alessandra Bagnato
CPSwarm proposes a new science of system integration and tools to support engineering of CPS swarms i.e., complex herds of heterogeneous CPS that collaborate based on local policies and that exhibit a collective behavior
http://www.cpswarm.eu/
The project aims at defining a complete tool chain that enables the designer to: Set-up collaborative, autonomous CPSs; Test the swarm performance with respect to the design goal; and Massively deploy solutions towards “reconfigurable” CPS devices.
Eurostars MODELS Project, System modeling and design exploration of applicati...Alessandra Bagnato
The project will develop an unified environment for the design of system applications on parallel platforms based
on CPU, multicore, manycore, FPGA and heterogeneous SoCs. The design tools composing this environment will
provide an unified SW/HW specification interface and systematic procedures for composing models at different
abstraction levels allowing for the automatic validation, drastically reducing the verification and debugging efforts.
This presentation highlights the Green Computing metrics measurement context from the MEASURE ITEA 3 project (Measuring Software Engineering) Project French cluster. It presents the Structured Metrics Meta-model (SMM) used as a standardized language and its implementation within the Softeam’s Modelio modelling and ICAM’s EMIT, a set of tools able to provide software power and energy measurements, its result mapping into SMM and the proof of its interoperability with Modelio and with all MEASURE partner tools in the future.
SysML for Modeling Co-Simulation Orchestration over FMI, INTO-CPS ApproachAlessandra Bagnato
This presentation describes a work in progress related to Model-Based Design of Cyber-Physical Systems (CPSs) in the context of the Horizon2020 INTO-CPS project. The presentation highlights usage of the INTO-CPS UML profile, that extends SysML to enable defining co-simulations over Functional Mock-up Interface (FMI) in the INTO-CPS platform. The presentation focuses on the results of the first year of the project.
MONDO Project @ H2020 Info Day- Cloud computing et Technologies logicielles –...Alessandra Bagnato
Session d’information Cloud computing, Software
Vendredi 11 décembre 2015
Dans les locaux de la DGE, à Ivry-sur-Seine
(67, rue Barbès - Métro 7 / Tramway 3a « Porte de Choisy »)
Session d’information sur les appels à projets (salle 273/263 de 10h à 12h30)
Programme prévisionnel 09:30 - 10:00 Enregistrement 10:00 - 10:20 Ouverture
Frédéric LAURENT et Rémi ARQUEVAUX, représentants au comité de programme TIC 10:20 - 10:50 Témoignage projet en cours Alessandra BAGNATO SOFTEAM R&D Department 10:50 - 11:40 Présentation des appels à projets 2016
Francisco MEDEIROS, Deputy Head of Unit DG CONNECT Unit E2 Software & Services, Cloud Computing
Cloud Computing - ICT 6
Software technologies - ICT 10
Questions/Réponses 11:40 - 12:10 Retour d’expérience d’évaluation de projet H2020 A confirmer 12:10 - 12:30 Comment être aidé à monter son projet
Christian Dubarry, Bpifrance
Présentation des dispositifs APT et APE à destination des PME
Frédéric Laurent, MENESR
Le nouveau mécanisme (MERSEI) de l'ANR
Inscription gratuite mais obligatoire avant le :
Mardi 08 décembre 2015
Inscription en ligne dans la limite des places dis
MONDO Project, a scalable modeling and model management on the Cloud - Paris...Alessandra Bagnato
MONDO Project, a scalable modeling and model management on the Cloud
Demo at https://twitter.com/alebagnato/status/667008408814379008
#Hawk Indexer on @modelio_org @mondo_project at @OSS_Paris #BigData track tomorrow 13h30 https://www.youtube.com/watch?v=EjJG281b_MA&feature=youtu.be! #OSSPARIS15 #opensource
INTO-CPS: An integrated “tool chain” for comprehensive Model-Based Design of ...Alessandra Bagnato
INTO-CPS Project: An integrated “tool chain” for comprehensive Model-Based Design of Cyber-Physical Systems
Paris Open Source Summit, POSS 2015
Paris, 19th November 2015
Flexible and Scalable Modelling in the MONDO Project: 3 Industrial Case Studi...Alessandra Bagnato
Today, system designs and their management are crucial parts of most systems development processes. To stay competitive engineers from several expertise domains use Model-Based engineering (MBE) to design the systems they intend to implement in order to specify, test, simulate, validate and iterate their design as soon as possible. System designs are living and evolving artefacts this imply to be able to manage them in an efficient and agile way. The MONDO FP7 EU project aims to comprehensively tackle the challenge of scalability in system design and management by developing the theoretical foundations and an open-source implementation of a platform and will offer to Model-Driven Engineering (MDE) users advanced flexibility in their different modeling approaches. This paper describes three different industrial demonstrators and three different modelling approaches that will be utilised to evaluate the capabilities of the MONDO technologies. For each demonstrator the interests of the industrial user partners are described along with their current and desired improvements in technologies to support MBE in a much more flexible way. Specific evaluation scenarios are specified for each of the targeted industrial domains as well.
Towards UML Testing Profile 2 OMG UTP Working Group 2nd UCAAT, 18th Septembe...Alessandra Bagnato
UTP (2) in a nutshell, First standardized language to support model-based testing released in 2005 (UTP 1)
Provides means for test design, execution and evaluation activities – and management thereof
Address needs for advanced testing approaches required/suitable for achieving a high degree of test automation
Methodology- and technology agnostic
Towards the revised and final submission
Initial submission was accepted in June 2014 by OMG Analysis & Design Task Force
Current work is the revision of the initial submission
Development of a conformance test specification for UTP 2 tools with UTP 2
Formal specification for mapping between UTP 1 to UTP 2 (QVT)
The entire submission was specified and documents have been generated with the modeling environment KnowEnterprise®
HiPEAC2014 modelio - softeam systems software engineering - a.bagnatoAlessandra Bagnato
The continuous rapid evolution of modern embedded systems has given rise to new challenges: such as increasingly complex design processes that cause delays in time to market and escalation of overall design costs. Additionally, these systems are more prone to containing errors, and it becomes more relevant to provide designers with effective tools to aid them in overcoming the difficulties related to the overall system design, verification and validation as soon as possible. During research carried out in several European projects related to real-time embedded systems, relevant industrial and academic end users feedback were gathered and summarized. This resulted in creation of novel design methodologies that were integrated in a high level modelling environment to increase the overall system design productivity. The requests and feedback deriving from the carried out research projects and aiming to guide embedded system designers taking full advantage of high level methodologies by utilizing the UML standard and its SysML and MARTE profiles are summarized in the presentation.
The OMG UML Testing Profile in Use--An Industrial Case Study for the Future I...Alessandra Bagnato
The EU funded FITTEST FP7 project aims to address the Future Internet (FI) testing challenges. FITTEST will be integrated in three pilot applications provided by three industrial partners, IBM, Sulake and Soft am. This paper presents the Modelio SaaS product and case study context selected by Soft am as FITTEST Project industrial application and the usage of the Object Management Group (OMG) UML Testing Profile module. In the paper, researchers present the advanced software engineering methods proposed by FITTEST and the usage of the OMG UML Testing Profile (UTP) in a real industrial environment within Softeam and Modelio SaaS.
MADES Seminar @ Laboratory of Model-Driven Engineering Applied to Embedded Sy...Alessandra Bagnato
-------
Lieu: salle 1073 (Nano-innov – Bat. 862)
Date: 24 Septembre 2012
Heure: 14:00 – 15:00
Orateur: Alessandra Bagnato
Titre: UML, SysML and MARTE in Use, a High Level Methodology for Real-time and Embedded Systems
-------
Résumé/Abstract
Rapid evolution of real-time and embedded systems (RTES) is continuing at an increasing rate, and new methodologies and design tools are needed to reduce design complexity while decreasing development costs and integrating aspects such as verification and validation. Model-Driven Engineering offers an interesting solution to the above mentioned challenges and is being widely used in various industrial and academic research projects.
The proposed seminar aims at presenting the development context and needs that have fostered the creation of a methodology and a set of UML, SysML and MARTE model-based diagrams within the research and development work carried out EU funded MADES project [http://www.mades-project.org/] which aims to develop novel model-driven techniques to improve existing practices in development of RTES for avionics and surveillance embedded systems industries.
The seminar aims at highlighting the current practice and needs in real Avionics development case studies and in particular takes advantage of the vision of an avionics system integrator, highlighting the perspective of the different needs of its different customers within the Avionics industry that have been taken as a basis to build the methodology and the set of diagrams.
The MADES Project is expected to deliver important improvements in each phase of embedded systems development lifecycle by providing new tools and technologies that support design, validation, simulation, and code generation, while providing better support for component reuse.
MADES technologies are expected to reduce development costs of complex embedded systems for the Aerospace, Defence and other key European industries, while enabling a next generation of highly complex embedded systems to be developed that are more reliable, yet costing less to maintain and evolve as industry needs change and hardware capabilities increase.
Open-Source Formative Evaluation Process in Remote Software Maintenance Alessandra Bagnato
The EU funded FastFix FP7 project aims to provide a monitoring control platform for remote software maintenance.
This presentation explains the formative evaluation process that evaluates methods, concepts and prototypes as the project is being developed. This process allows for a continuous integration and enhancement of the platform. As a result, the development process is steadily monitored and evaluated, and early feedback is provided to the designers, developers and architects. The feedback came from the two industrial end user partners: Txt e-solutions and Prodevelop and will help to improve the overall FastFix design methodology and the related tool set.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
2. 2
MEASURE
MEASURE ITEA 3 PROJECT
ITEA is the EUREKA Cluster
programme supporting
innovative, industry-driven,
pre-competitive R&D projects
in the area of Software-
intensive Systems & Services
(SiSS).
4. 4
MEASURE
• To develop a platform, methods and tools for
measurement and analysis of the various phases of the
software development lifecycle
• To define new metrics needed in today’s industry context
and markets
• To validate the within the project case studies (
Bitdefender, DCNS and Softeam).
MEASURE Objectives
5. 5
MEASURE
Project Challenges
▪ Formal description of metrics
▪ Specification without ambiguity
▪ Flexible to describe different types of metrics
▪ Modeling of measurement data
▪ Automatic process to check and deploys metrics
▪ Facilitating portability of metrics and measurements
▪ Introduction of tools to facilitate the monitoring and to be
integrated in the platform.
▪ Having a common language and platform facilitating the
creation of a database of metrics for better exploitation
6. 6
MEASURE
Project Innovations
• Definition of new metrics (green metrics, code optimisation
metrics, complexity metrics, error density metrics) that enrich
software development lifecycle
• A common language, OMG Structured Metrics Metamodel
facilitates exchanges between different tools
• Methods for performing measurements in accordance with the
SMM standard
• New Measurement and Analysis tools to perform the needed
metrics calculations and the needed Analysis
• New algorithms to analyse big amout of measurements (big data
challenge)
• Everything integrated in a single platform
13. 14
MEASURE
MEASURE some key results
▪ First design and implementation of the MEASURE platform
- Technologies: Angular JS, Spring MVC, Elasticsearch, Kibana
- Open source project available in Github
- Started implementation and integration of SMM
▪ Identification of measurements tools
- MMTS: Model Measurement Tool of Softeam (Softeam)
- The RIVER tool (Bitdefender/Univ Bucharest)
- FSMHSGen: FSM Homing Sequence Generator (IMT)
- MMT: Montimage Monitoring Tool (Montimage)
- EMIT: Energy Monitoring Toot (ICAM)
- More state of the art open source tools
14. 15
MEASURE
MEASURE some key results
▪ Measures
- Repository of Measures implementations defined in SMM
(Structured Metrics Meta-model) format, an executable OMG
Standard which can be integrated to Measure Platform.
▪ https://github.com/ITEA3-Measure/Measures/wiki
▪ SMMMeasureApi
- API allowing to define SMM measures which can be deployed on
Measure Platform.
▪ https://github.com/ITEA3-Measure/SMMMeasureApi/wiki
▪ MeasurePlatform
- a web application which allow to collect , calculate , store and
visualize measurements by execution of measures defined in SMM
(Structured Metrics Metamodel)
▪ https://github.com/ITEA3-Measure/MeasurePlatform/wiki
17. 18
MEASURE
Contacts
Alessandra Bagnato
SOFTEAM | ModelioSoft
Alessandra.bagnato@softeam.fr
SOFTEAM R&D Web Site:
http://rd.softeam.com
Modelio UML Open Source Modeling Tool Web Site :
http://www.modelio.org
MEASURE Web site
▪ http://measure.softeam-rd.eu/
MEASURE on GitHub
https://github.com/ITEA3-Measure