Accumulation of residual yarn on ring frame spindles at the end of every doff has been a perennial problem for the spinning industry. TeraSpin has developed a Smart Yarn Catcher that is self-cleaning. The residual yarn left behind after every doff is expelled by centrifugal forces. This results in reduced man-hours in cleaning, ensures positive gripping of yarn, reduced start-up breaks, and improves overall ring frame productivity. For more information visit www.ategroup.com/teraspin

1. QUALITY • RELIABILITY • INNOVATION
V3,
Jun
2022
The ultimate solution to eliminate residual yarn
accumulation on ring frame spindles
§ Clamping faces close
at 6000 rpm (+/- 500 rpm)
Benefits:
§ No cleaning of residual yarn –
less labour hours
§ Improved ring frame productivity
Automatic opening and closing of
clamping faces with change in
spindle speed
§ Clamping faces open
at 12500 rpm (+/- 1000 rpm)
§ Positive gripping of yarn
§ No accumulation of residual yarn
§ Reduced start-up breaks
Precise alignment of upper and
lower clamping faces with
each other
§ Minimum yarn used for
clamping
Benefit:
§ Easy yarn cutting during
removal of full bobbin (tube)
Special cutter for yarn cutting
Benefit:
Copyright © 2022 A.T.E. Enterprises Private Limited (Business Unit TeraSpin) | CIN: U51503MH2001PTC132921
+91-22-6676 6100 | sales@teraspin.com | www.ategroup.com/teraspin
Follow us on: ®