1. The document contains test case scenarios for the TEMS application to test the target search functionality.
2. It includes scenarios to test single and multiple search criteria including vendor name, BAN, circuit number, charge type, and created by.
3. Each scenario consists of test steps including login, navigation to search page, entering search criteria, and verifying search results. Expected and actual results are recorded.
The document discusses drive testing using TEMS Investigation software. It provides an overview of the tools needed for drive testing including a laptop, dongle, mobile set, modem, GPS, and more. It outlines the steps to setup the software and ensure all tools are connected and functioning properly. These include attaching the required devices, loading cell files, and selecting the log collection location. The document also describes some key parameters that can be analyzed during drive testing like signal strength, interference, and throughput.
This document discusses optimization of networks using drive testing and TEMS software. It provides information on:
1) How drive testing and TEMS can analyze network performance from a subscriber perspective by recording measurement data.
2) The types of information displayed in TEMS windows including cell identity, signal strength, quality, and timing advance measurements.
3) How to use the TEMS software including default tabs, maps, recording properties, and report generation.
On completion of the module one should be clear about the parameters required during drive test what does it mean and how much it is important.
Parameters regarding in windows like :
a) Current Channel
b) Radio parameters
c) Serving + Neighbors
Time: It is system time of computer.
Cell name: It displays the name of the sector which is serving according to the cellfile that is loaded in TEMS.
CGI : It stands for the Cell Global Identity which is unique for every sector of the site. It consists of MCC,MNC,LAC,CI.
Cell GPRS Support: Tells sector is having GPRS or not. Values are Yes or No .
Band : It tells in which Freq. Band mobile is operating e.g. GSM 900/ 1800.
BCCH ARFCN: It tells by which BCCH is the mobile station getting served.
TCH ARFCN: On which Traffic Freq. call is going on.
BSIC (Base Station Identity Code) : It is combination of Network Color Code (NCC) (0 – 7) & Base Station Color Code (BCC) (0 – 7). e.g. 62. It is decoded by mobile on every Sync. Channel Message.
Mode: It is shows in which state is mobile operating, Idle, Dedicated & Packet.
Time slot: On which time slot of current TCH call is going on. Viz. time slot no. of TRX.
WCDMA optimization & Drive test analysisTABREZ KHAN
This document discusses various tools and methods used for optimizing 3G/4G network performance through drive testing. It covers collecting data from drive test equipment like UE's and scanners, analyzing metrics like coverage, interference, missing neighbors, and throughput. The purpose is to identify problems, analyze root causes like improper configurations, interference issues, and develop optimization solutions like adjusting antenna tilting, heights, powers to improve coverage, dominance and call performance.
Performance testing for web applications – techniques, metrics and profilingTestCampRO
The document discusses techniques for performance testing web applications, including staging the testing environment, building test assets, running tests, and analyzing metrics. It describes deploying a testbed, eliminating deployment issues, analyzing client data to develop test scenarios, executing manual and automated tests, and gathering metrics on system performance, databases, and applications. The goal is to identify potential performance issues before load testing at higher user volumes expected by clients.
Performance testing for web applications – techniques, metrics and profilingTestCampRO
The document discusses performance testing techniques for web applications. It covers three main areas: techniques, metrics analysis, and profiling. For techniques, it describes how to stage the testing environment, build test assets by analyzing client data and building scenarios, and running manual and automated tests. For metrics analysis, it discusses automating data collection and processing and analyzing system, database, and network issues. Finally, for profiling it explains analyzing load distribution, database profiling through workload summaries and SQL queries, and application profiling through method-level timing. The goal is to publish results from multiple test iterations to identify performance bottlenecks.
About Basics of IBM Rational Performance Tester Tool.
It describes what is RPT? how to do a simple script in RPT.
And how to execute it?.
Its a brief idea about RPT
The document discusses drive testing using TEMS Investigation software. It provides an overview of the tools needed for drive testing including a laptop, dongle, mobile set, modem, GPS, and more. It outlines the steps to setup the software and ensure all tools are connected and functioning properly. These include attaching the required devices, loading cell files, and selecting the log collection location. The document also describes some key parameters that can be analyzed during drive testing like signal strength, interference, and throughput.
This document discusses optimization of networks using drive testing and TEMS software. It provides information on:
1) How drive testing and TEMS can analyze network performance from a subscriber perspective by recording measurement data.
2) The types of information displayed in TEMS windows including cell identity, signal strength, quality, and timing advance measurements.
3) How to use the TEMS software including default tabs, maps, recording properties, and report generation.
On completion of the module one should be clear about the parameters required during drive test what does it mean and how much it is important.
Parameters regarding in windows like :
a) Current Channel
b) Radio parameters
c) Serving + Neighbors
Time: It is system time of computer.
Cell name: It displays the name of the sector which is serving according to the cellfile that is loaded in TEMS.
CGI : It stands for the Cell Global Identity which is unique for every sector of the site. It consists of MCC,MNC,LAC,CI.
Cell GPRS Support: Tells sector is having GPRS or not. Values are Yes or No .
Band : It tells in which Freq. Band mobile is operating e.g. GSM 900/ 1800.
BCCH ARFCN: It tells by which BCCH is the mobile station getting served.
TCH ARFCN: On which Traffic Freq. call is going on.
BSIC (Base Station Identity Code) : It is combination of Network Color Code (NCC) (0 – 7) & Base Station Color Code (BCC) (0 – 7). e.g. 62. It is decoded by mobile on every Sync. Channel Message.
Mode: It is shows in which state is mobile operating, Idle, Dedicated & Packet.
Time slot: On which time slot of current TCH call is going on. Viz. time slot no. of TRX.
WCDMA optimization & Drive test analysisTABREZ KHAN
This document discusses various tools and methods used for optimizing 3G/4G network performance through drive testing. It covers collecting data from drive test equipment like UE's and scanners, analyzing metrics like coverage, interference, missing neighbors, and throughput. The purpose is to identify problems, analyze root causes like improper configurations, interference issues, and develop optimization solutions like adjusting antenna tilting, heights, powers to improve coverage, dominance and call performance.
Performance testing for web applications – techniques, metrics and profilingTestCampRO
The document discusses techniques for performance testing web applications, including staging the testing environment, building test assets, running tests, and analyzing metrics. It describes deploying a testbed, eliminating deployment issues, analyzing client data to develop test scenarios, executing manual and automated tests, and gathering metrics on system performance, databases, and applications. The goal is to identify potential performance issues before load testing at higher user volumes expected by clients.
Performance testing for web applications – techniques, metrics and profilingTestCampRO
The document discusses performance testing techniques for web applications. It covers three main areas: techniques, metrics analysis, and profiling. For techniques, it describes how to stage the testing environment, build test assets by analyzing client data and building scenarios, and running manual and automated tests. For metrics analysis, it discusses automating data collection and processing and analyzing system, database, and network issues. Finally, for profiling it explains analyzing load distribution, database profiling through workload summaries and SQL queries, and application profiling through method-level timing. The goal is to publish results from multiple test iterations to identify performance bottlenecks.
About Basics of IBM Rational Performance Tester Tool.
It describes what is RPT? how to do a simple script in RPT.
And how to execute it?.
Its a brief idea about RPT
Here is one way to drill down from the business requirements to test scripts for an ATM example:
Business Requirement:
- "ATM must do withdrawals"
Test Requirement:
- The ATM should allow a user to withdraw cash within the allowed limits.
Test Scenarios:
1. Valid withdrawal within limits
2. Withdrawal exceeds daily limit
3. Withdrawal is not a multiple of $20
4. Withdrawal amount is less than minimum ($20)
5. Withdrawal amount is greater than maximum ($300)
Test Procedure/Script:
1. Valid withdrawal
a. Insert card
b. Enter pin
c. Select
This document provides instructions for creating a form validation project using C# controls in Visual Studio. It includes:
1) An outline of the project steps which involves creating an ASPX file, adding HTML form code, and various validation controls like RequiredFieldValidator, RangeValidator, etc.
2) Code snippets and explanations for adding the validation controls to validate fields like name, age, email. It also includes code for custom validation functions.
3) Server-side code for form submission and reset buttons that displays validated values in a panel or resets the form.
The goal is to create a sample feedback form project that demonstrates validating form fields using different validation techniques in C#. Detailed instructions and code are
ETL Validator Usecase - checking for valid field and data formatDatagaps Inc
This document describes how to use ETL Validator to check field formats through the creation of test cases and SQL queries. It provides step-by-step instructions to create a test plan, select tables and fields, add SQL queries to find records that violate field format rules, run the test, and view results. The key benefits of ETL Validator are listed as 100% test coverage, repeatability, cost reduction, faster time to market, and end to end testing.
PT1420 Decision Structures in Pseudocode and Visual Basic .docxamrit47
PT1420: Decision Structures in Pseudocode and Visual Basic
Page 1
This lab requires you to think about the steps that take place in a program by writing
pseudocode. Read the following program prior to completing the lab.
Career Tech Placement is hiring employees for placement at technology firms across the
city. Prior to granting an interview, the company has a 100-point test that is used to
determine if the candidate should be interviewed. Depending on the candidate’s score,
he or she will be placed in 1 of 4 categories for possible employment and flagging for an
interview:
Score Employment Category Interview Possibility
85 or above Definite Yes
70 – 84 Likely Yes
60 – 69 Maybe Yes
59 or below No No
Career Tech Placement has asked you to write a program that will allow the company to
enter a test score and then set the employment category and the interview possibility
variables based on the chart above.
Given the major task involved in this program, you decide your program should have three
variables and three modules:
Variable Name Purpose
Declare Integer testScore = 0 Stores the test score of the candidate.
Declare String category = “ “ Stores Definite, Likely, Maybe, or No
Declare String interview = “ “ Stores Yes or No
PT1420: Decision Structures in Pseudocode and Visual Basic
Page 2
Module Name Purpose
Module getScore() Allows the user to enter the test score
Module employCat() Determines the employment category
Module interviewPoss() This module will determine if a day off should
be awarded.
Module displayInfo() Displays the testScore, category, and interview
variables.
Step 1: Complete the pseudocode by writing the missing lines. When writing your modules and
making calls, be sure to pass necessary variables as arguments and accept them as reference
parameters if they need to be modified in the module (Reference: Testing a Series of
Conditions, page 138 from your textbook, Starting Out with Programming Logic & Design.).
Main Module()
//Declare variables on the next 3 lines
//Make Module calls and pass necessary variables on the next 4 lines
End Main
Module getScore(Integer Ref testScore)
//Ask the user to enter a test score
End Module
Module employCat(Integer testScore, String Ref category)
//Determine what employment category they are in based on their test score
//Similar to if the score is less than 60, then category is “No”
PT1420: Decision Structures in Pseudocode and Visual Basic
...
This document provides steps to redirect serial port data to a field in another software using Bill Redirect 5.0J. The 8 steps are:
1. Download and install Bill Redirect
2. Disable all sections except Serial Port and set the switch to OFF
3. Use the Field Finder to identify the window title and field number
4. Configure the serial port number, baud rate, parity and data bits
5. Add tags to redirect serial receive data to the target field
6. Save the configuration
7. Received serial data will now appear in the target field.
Sheet1Test #Test DescriptionExpected System ResultsPassFailCommen.docxmaoanderton
Sheet1Test #Test DescriptionExpected System ResultsPass/FailCommentsTest DateTester NameT.1Confirm the login process.
1. Click the login page in the web browser.
2. Enter the valid username and password.
3.Click login button.The system will validate if the user name and password is correct.If the user name and password is correct the system will display application main page.PassWorked properly4/22/17RCBT.2Confirm that the system display alert for unsuccessful logIn "User id or password is incorrect. Please try again"
1.Click the login page in the web browser.
2. Enter the invalid username or invalid password.
3.Click the login button.The system will validate user name and password and will display"Username or password is incorrect. Please try againt".PassWorked properly4/22/17RCBT.3Confirm that new users can create their account.
1.Click the login page in the web browser.
2.Click on the create new account button.
3.Enter all the required information and security quetions.
4.Click on the submit button.The system will validate all the required fields and will display message "Account created successfully".PassWorked properly4/22/17RCBT.4Confirm that the system recommends for strong password.
1.Click the login page in the web browser.
2. Click on create account.
3. Choose a username and password.
4. Retype the password and click submit.The system will validate the username and check the password strength. If the password is weak it will recommend the user to choose a stronger password.PassWorked properly4/22/17RCBT.5Confirm user can logIn by answering security questions when forgot password.
1.Click the login page in the web browser.
2. Click on forgot password button.
3. Enter username and answer security questions.
4. Click submit button.The system will validate information and
display option to change passowrd.PassWorked properly4/22/17RCBT.6Confirm that the system log out the user after 15 minutes of inactivity.
1.Click the login page in the web browser.
2.Enter the correct user id/password and click login.
3.Do not use the system for 15 minutes.
The system will logout the user itself after 15 minutes of inactivity.PassWorked properly4/22/17RCBT.7Confirm that the user change their password.
1. Click the login page in the web browser.
2. Click on reset password tab.
3. Change the new password and click confirm.The system will change the new password and give message password sucessfully changed.PassWorked properly4/22/17RCBT.8Confirm that different pages (department order entry, results entry, order result viewer, report, label reprint and pending inquiry) are accessible from application main pages by double clicking on respective image icons.
1. Open application main page.
2. Double click on image.The system will displlay respecitve page.PassWorked properly4/22/17RCBT.9Confirm that user can create new order based on information provided on requisition paper.
1. Click the department order entry icon from application main page.
2. En.
This document provides instructions for creating a form validation project in Visual Basic using validation controls. It includes:
1) An outline of the project steps which involves creating an ASPX file, adding HTML form code, and placing various validation controls like RequiredFieldValidator, RangeValidator, etc.
2) Code snippets for the validation controls with explanations of properties to set.
3) Instructions for adding buttons and panels to submit and reset the form and display output.
4) Server-side code examples for validating fields on submit and resetting the form.
The goal is to walk through creating a sample feedback form project with validation controls to demonstrate form validation techniques in Visual Basic.
This document contains 8 test cases for an online banking system. Each test case has steps to test a specific function like creating a new customer, creating a new account, depositing money, withdrawing money, funds transfer, paying utility bills, viewing transaction history, and checking account status. Each step lists the expected system response and there is a pass/fail comment column to record the result.
For Youtube Videos: bit.do/sevents
What is a testing technique?
Black and White box testing
Black box test techniques
White box test techniques
Error Guessing
This document provides an overview of a class on system analysis and design, including topics on enterprise resource planning (ERP) systems, the role of users in implementation projects, user roles, system security, application access setup, and test scripts. It discusses ERP systems and their focus on internal business processes. It also includes examples of project life cycles, security setup, and a test script for three-way matching in accounts payable.
4.2 Service TestThis test is for the Services module. It designe.docxgilbertkpeters11344
4.2 Service Test
This test is for the Services module. It designed to test the software routines that perform the service functions of the BBMS. {{Add some more here about the white-box testing, etc}}
4.2.1 CalendarLookup Service
(See SDD sections 5.1.2 and 6.1.1)
This tests the algorithm that displays a calendar with reservation days highlighted in calendar days.
{{ Refer to the section number with the screen in the SDD and the section with the module in the module detailed design section of the SDD }}
{{ Also there is a description of what the module is supposed to do in the module detailed design of the SDD detail design section }}
Input Specifications
Output Specifications
Click Reservations button from the main menu.
Calendar screen will come up.
Click Room 1 button
setRoomId has value of 1
getPrice retutns a value of 80.00
getReservedFlag returns false value
all calendar display day have white value
Click Room 2 button
setRoomId has value of 2
getPrice returns a value of 90.00
getReservedFlag returns true value
all calendar display day have white value except days 15 and 16 which a have blue value
Click Room 3 button
setRoomId has value of 3
getPrice returns a value of 100.00
getReservedFlag returns false value
all calendar display day have white value
Click Exit Button
Calendar screen closes and main menu screen is displayed
4.2.2 MakeReservation Service
(See SDD sections 5.1.3 and 6.1.2)
Input Specifications
Output Specifications
Click Room 3 button
setRoomId to Rooms has value 3
getPrice from Rooms has value 100.00
Click the calendar pop-up button the Reservation Start Date box
GUI function to pop-up small calendar is executed
Click 14 on the pop-up calendar
GUI calendar puts value 14 in putStartDate
Click the calendar pop-up button in the Reservation End Date box
GUI function to pop-up small calendar is executed
Click 16 on the pop-up calendar
GUI calendar puts value 16 in putEndDate
Click the Guaranteed box
setGuaranteed is set to true
Click the calendar pop-up button in the Guaranteed Date box
GUI function to pop-up small calendar is executed
Click 10 on the pop-up calendar
GUI calendar puts value 20141110 putGuaranteedDate
Click Create Reservation button
addReservation executes to create a new reservation record in the Reservation domain object.
It returns a new reservation index value which is put into reservationId of Rooms domain object to link the reservation to the room.
It puts the values inputted from user interface into new reservation record.
4.2.3 AddGuest Service
(See SDD sections 5.1.4 and 6.1.3)
Input Specifications
Output Specifications
Enter James in the First Name box and press the enter key.
Value nameFirst associated with the reservationId is set to “James”
Enter Markman in the Last Name box and press the enter key.
Value nameLast associated with nameFirst and reservationId is set to “Markman”
Enter 101 Fairview Street and press the enter key.
Value cusAddress associated with active reservationId.
The document discusses various software testing and evaluation techniques used to ensure software solutions meet design specifications and are free from errors. It covers topics like unit testing, integration testing, system testing, black box and white box testing, test data generation, benchmarking, and quality assurance.
This document provides details about an online quarry logistics data management system project. It includes objectives of developing a computerized system, need for a new system compared to current manual processes, software and hardware requirements, modules for both admin and customer, database tables, and process algorithms. The key objectives are to maintain data online for easier access and management, provide a better user interface, and allow customers to generate reports and track orders directly. It aims to address issues with current slow, manual systems like data loss and limited access.
TEST CASE GENERATION GENERATION BLOCK BOX APPROACHSneha Padhiar
The document describes black box, white box, and gray box testing strategies. It provides examples of test cases for a tax tracking software project that test the login, pending work, invoices, and outward modules. The test cases include test scenarios, preconditions, test steps, expected and actual results, and status.
The document discusses different types of software testing including white box testing, black box testing, integration testing, system and acceptance testing, and regression testing. It describes various techniques for each type such as statement coverage for white box testing and requirements-based testing for black box testing. The goal of testing is to find errors, check requirements, and evaluate properties like reliability, performance, and security.
DataScrapingServices.com #1 Web Scraping Company across the World Wid.
We specialize in online directory scraping, email searching, data cleaning, data harvesting, and web scraping services.
The basic principle of this company is to deliver what the customer required in the best way. We believe in a transparent and long-term business relationship. Over a decade we worked with over 500+ customers from across the globe. For any Data Scraping requirements feel free to email us at info@datascrapingservices.com
DataScrapingServices.com #1 Web Scraping Company across the WorldWide.
We specialize in online directory scraping, email searching, data cleaning, data harvesting
and web scraping services. Basic principal of this company is to deliver what the our
customer required in best way. We believe in transparent and long term business
relationship. Over a decade we worked for over 500 customers from across the globe. For
any Data Scraping requirements feel free to email us on info@datascrapingservices.com.
1. The document provides step-by-step instructions for using SAP transactions to display inspection methods, characteristics, and batches.
2. It describes how to use transaction QS36 to display an inspection method's assignments to master characteristics and tasks, and transaction QS24 to view a characteristic's details, methods, and settings.
3. The guide also outlines the process for creating a new batch using transaction MSC1N, including entering material, plant, location, and date information.
- Oracle Business Rules is a lightweight business rules product that is part of Oracle Fusion Middleware and can be used in SOA and BPM suites. It allows business processes to be more agile and align with changing business demands by acting as a central rules repository.
- The document demonstrates how to create a rule in Oracle Business Rules using JDeveloper to calculate student grades based on average marks and test it using various methods like a debugging function, the Enterprise Manager console, and SOAP UI web services calls.
- A decision table rule is created to return a grade based on comparing average marks to ranges in a bucketset. The rule can then be tested by passing sample data and evaluating the output.
Here is one way to drill down from the business requirements to test scripts for an ATM example:
Business Requirement:
- "ATM must do withdrawals"
Test Requirement:
- The ATM should allow a user to withdraw cash within the allowed limits.
Test Scenarios:
1. Valid withdrawal within limits
2. Withdrawal exceeds daily limit
3. Withdrawal is not a multiple of $20
4. Withdrawal amount is less than minimum ($20)
5. Withdrawal amount is greater than maximum ($300)
Test Procedure/Script:
1. Valid withdrawal
a. Insert card
b. Enter pin
c. Select
This document provides instructions for creating a form validation project using C# controls in Visual Studio. It includes:
1) An outline of the project steps which involves creating an ASPX file, adding HTML form code, and various validation controls like RequiredFieldValidator, RangeValidator, etc.
2) Code snippets and explanations for adding the validation controls to validate fields like name, age, email. It also includes code for custom validation functions.
3) Server-side code for form submission and reset buttons that displays validated values in a panel or resets the form.
The goal is to create a sample feedback form project that demonstrates validating form fields using different validation techniques in C#. Detailed instructions and code are
ETL Validator Usecase - checking for valid field and data formatDatagaps Inc
This document describes how to use ETL Validator to check field formats through the creation of test cases and SQL queries. It provides step-by-step instructions to create a test plan, select tables and fields, add SQL queries to find records that violate field format rules, run the test, and view results. The key benefits of ETL Validator are listed as 100% test coverage, repeatability, cost reduction, faster time to market, and end to end testing.
PT1420 Decision Structures in Pseudocode and Visual Basic .docxamrit47
PT1420: Decision Structures in Pseudocode and Visual Basic
Page 1
This lab requires you to think about the steps that take place in a program by writing
pseudocode. Read the following program prior to completing the lab.
Career Tech Placement is hiring employees for placement at technology firms across the
city. Prior to granting an interview, the company has a 100-point test that is used to
determine if the candidate should be interviewed. Depending on the candidate’s score,
he or she will be placed in 1 of 4 categories for possible employment and flagging for an
interview:
Score Employment Category Interview Possibility
85 or above Definite Yes
70 – 84 Likely Yes
60 – 69 Maybe Yes
59 or below No No
Career Tech Placement has asked you to write a program that will allow the company to
enter a test score and then set the employment category and the interview possibility
variables based on the chart above.
Given the major task involved in this program, you decide your program should have three
variables and three modules:
Variable Name Purpose
Declare Integer testScore = 0 Stores the test score of the candidate.
Declare String category = “ “ Stores Definite, Likely, Maybe, or No
Declare String interview = “ “ Stores Yes or No
PT1420: Decision Structures in Pseudocode and Visual Basic
Page 2
Module Name Purpose
Module getScore() Allows the user to enter the test score
Module employCat() Determines the employment category
Module interviewPoss() This module will determine if a day off should
be awarded.
Module displayInfo() Displays the testScore, category, and interview
variables.
Step 1: Complete the pseudocode by writing the missing lines. When writing your modules and
making calls, be sure to pass necessary variables as arguments and accept them as reference
parameters if they need to be modified in the module (Reference: Testing a Series of
Conditions, page 138 from your textbook, Starting Out with Programming Logic & Design.).
Main Module()
//Declare variables on the next 3 lines
//Make Module calls and pass necessary variables on the next 4 lines
End Main
Module getScore(Integer Ref testScore)
//Ask the user to enter a test score
End Module
Module employCat(Integer testScore, String Ref category)
//Determine what employment category they are in based on their test score
//Similar to if the score is less than 60, then category is “No”
PT1420: Decision Structures in Pseudocode and Visual Basic
...
This document provides steps to redirect serial port data to a field in another software using Bill Redirect 5.0J. The 8 steps are:
1. Download and install Bill Redirect
2. Disable all sections except Serial Port and set the switch to OFF
3. Use the Field Finder to identify the window title and field number
4. Configure the serial port number, baud rate, parity and data bits
5. Add tags to redirect serial receive data to the target field
6. Save the configuration
7. Received serial data will now appear in the target field.
Sheet1Test #Test DescriptionExpected System ResultsPassFailCommen.docxmaoanderton
Sheet1Test #Test DescriptionExpected System ResultsPass/FailCommentsTest DateTester NameT.1Confirm the login process.
1. Click the login page in the web browser.
2. Enter the valid username and password.
3.Click login button.The system will validate if the user name and password is correct.If the user name and password is correct the system will display application main page.PassWorked properly4/22/17RCBT.2Confirm that the system display alert for unsuccessful logIn "User id or password is incorrect. Please try again"
1.Click the login page in the web browser.
2. Enter the invalid username or invalid password.
3.Click the login button.The system will validate user name and password and will display"Username or password is incorrect. Please try againt".PassWorked properly4/22/17RCBT.3Confirm that new users can create their account.
1.Click the login page in the web browser.
2.Click on the create new account button.
3.Enter all the required information and security quetions.
4.Click on the submit button.The system will validate all the required fields and will display message "Account created successfully".PassWorked properly4/22/17RCBT.4Confirm that the system recommends for strong password.
1.Click the login page in the web browser.
2. Click on create account.
3. Choose a username and password.
4. Retype the password and click submit.The system will validate the username and check the password strength. If the password is weak it will recommend the user to choose a stronger password.PassWorked properly4/22/17RCBT.5Confirm user can logIn by answering security questions when forgot password.
1.Click the login page in the web browser.
2. Click on forgot password button.
3. Enter username and answer security questions.
4. Click submit button.The system will validate information and
display option to change passowrd.PassWorked properly4/22/17RCBT.6Confirm that the system log out the user after 15 minutes of inactivity.
1.Click the login page in the web browser.
2.Enter the correct user id/password and click login.
3.Do not use the system for 15 minutes.
The system will logout the user itself after 15 minutes of inactivity.PassWorked properly4/22/17RCBT.7Confirm that the user change their password.
1. Click the login page in the web browser.
2. Click on reset password tab.
3. Change the new password and click confirm.The system will change the new password and give message password sucessfully changed.PassWorked properly4/22/17RCBT.8Confirm that different pages (department order entry, results entry, order result viewer, report, label reprint and pending inquiry) are accessible from application main pages by double clicking on respective image icons.
1. Open application main page.
2. Double click on image.The system will displlay respecitve page.PassWorked properly4/22/17RCBT.9Confirm that user can create new order based on information provided on requisition paper.
1. Click the department order entry icon from application main page.
2. En.
This document provides instructions for creating a form validation project in Visual Basic using validation controls. It includes:
1) An outline of the project steps which involves creating an ASPX file, adding HTML form code, and placing various validation controls like RequiredFieldValidator, RangeValidator, etc.
2) Code snippets for the validation controls with explanations of properties to set.
3) Instructions for adding buttons and panels to submit and reset the form and display output.
4) Server-side code examples for validating fields on submit and resetting the form.
The goal is to walk through creating a sample feedback form project with validation controls to demonstrate form validation techniques in Visual Basic.
This document contains 8 test cases for an online banking system. Each test case has steps to test a specific function like creating a new customer, creating a new account, depositing money, withdrawing money, funds transfer, paying utility bills, viewing transaction history, and checking account status. Each step lists the expected system response and there is a pass/fail comment column to record the result.
For Youtube Videos: bit.do/sevents
What is a testing technique?
Black and White box testing
Black box test techniques
White box test techniques
Error Guessing
This document provides an overview of a class on system analysis and design, including topics on enterprise resource planning (ERP) systems, the role of users in implementation projects, user roles, system security, application access setup, and test scripts. It discusses ERP systems and their focus on internal business processes. It also includes examples of project life cycles, security setup, and a test script for three-way matching in accounts payable.
4.2 Service TestThis test is for the Services module. It designe.docxgilbertkpeters11344
4.2 Service Test
This test is for the Services module. It designed to test the software routines that perform the service functions of the BBMS. {{Add some more here about the white-box testing, etc}}
4.2.1 CalendarLookup Service
(See SDD sections 5.1.2 and 6.1.1)
This tests the algorithm that displays a calendar with reservation days highlighted in calendar days.
{{ Refer to the section number with the screen in the SDD and the section with the module in the module detailed design section of the SDD }}
{{ Also there is a description of what the module is supposed to do in the module detailed design of the SDD detail design section }}
Input Specifications
Output Specifications
Click Reservations button from the main menu.
Calendar screen will come up.
Click Room 1 button
setRoomId has value of 1
getPrice retutns a value of 80.00
getReservedFlag returns false value
all calendar display day have white value
Click Room 2 button
setRoomId has value of 2
getPrice returns a value of 90.00
getReservedFlag returns true value
all calendar display day have white value except days 15 and 16 which a have blue value
Click Room 3 button
setRoomId has value of 3
getPrice returns a value of 100.00
getReservedFlag returns false value
all calendar display day have white value
Click Exit Button
Calendar screen closes and main menu screen is displayed
4.2.2 MakeReservation Service
(See SDD sections 5.1.3 and 6.1.2)
Input Specifications
Output Specifications
Click Room 3 button
setRoomId to Rooms has value 3
getPrice from Rooms has value 100.00
Click the calendar pop-up button the Reservation Start Date box
GUI function to pop-up small calendar is executed
Click 14 on the pop-up calendar
GUI calendar puts value 14 in putStartDate
Click the calendar pop-up button in the Reservation End Date box
GUI function to pop-up small calendar is executed
Click 16 on the pop-up calendar
GUI calendar puts value 16 in putEndDate
Click the Guaranteed box
setGuaranteed is set to true
Click the calendar pop-up button in the Guaranteed Date box
GUI function to pop-up small calendar is executed
Click 10 on the pop-up calendar
GUI calendar puts value 20141110 putGuaranteedDate
Click Create Reservation button
addReservation executes to create a new reservation record in the Reservation domain object.
It returns a new reservation index value which is put into reservationId of Rooms domain object to link the reservation to the room.
It puts the values inputted from user interface into new reservation record.
4.2.3 AddGuest Service
(See SDD sections 5.1.4 and 6.1.3)
Input Specifications
Output Specifications
Enter James in the First Name box and press the enter key.
Value nameFirst associated with the reservationId is set to “James”
Enter Markman in the Last Name box and press the enter key.
Value nameLast associated with nameFirst and reservationId is set to “Markman”
Enter 101 Fairview Street and press the enter key.
Value cusAddress associated with active reservationId.
The document discusses various software testing and evaluation techniques used to ensure software solutions meet design specifications and are free from errors. It covers topics like unit testing, integration testing, system testing, black box and white box testing, test data generation, benchmarking, and quality assurance.
This document provides details about an online quarry logistics data management system project. It includes objectives of developing a computerized system, need for a new system compared to current manual processes, software and hardware requirements, modules for both admin and customer, database tables, and process algorithms. The key objectives are to maintain data online for easier access and management, provide a better user interface, and allow customers to generate reports and track orders directly. It aims to address issues with current slow, manual systems like data loss and limited access.
TEST CASE GENERATION GENERATION BLOCK BOX APPROACHSneha Padhiar
The document describes black box, white box, and gray box testing strategies. It provides examples of test cases for a tax tracking software project that test the login, pending work, invoices, and outward modules. The test cases include test scenarios, preconditions, test steps, expected and actual results, and status.
The document discusses different types of software testing including white box testing, black box testing, integration testing, system and acceptance testing, and regression testing. It describes various techniques for each type such as statement coverage for white box testing and requirements-based testing for black box testing. The goal of testing is to find errors, check requirements, and evaluate properties like reliability, performance, and security.
DataScrapingServices.com #1 Web Scraping Company across the World Wid.
We specialize in online directory scraping, email searching, data cleaning, data harvesting, and web scraping services.
The basic principle of this company is to deliver what the customer required in the best way. We believe in a transparent and long-term business relationship. Over a decade we worked with over 500+ customers from across the globe. For any Data Scraping requirements feel free to email us at info@datascrapingservices.com
DataScrapingServices.com #1 Web Scraping Company across the WorldWide.
We specialize in online directory scraping, email searching, data cleaning, data harvesting
and web scraping services. Basic principal of this company is to deliver what the our
customer required in best way. We believe in transparent and long term business
relationship. Over a decade we worked for over 500 customers from across the globe. For
any Data Scraping requirements feel free to email us on info@datascrapingservices.com.
1. The document provides step-by-step instructions for using SAP transactions to display inspection methods, characteristics, and batches.
2. It describes how to use transaction QS36 to display an inspection method's assignments to master characteristics and tasks, and transaction QS24 to view a characteristic's details, methods, and settings.
3. The guide also outlines the process for creating a new batch using transaction MSC1N, including entering material, plant, location, and date information.
- Oracle Business Rules is a lightweight business rules product that is part of Oracle Fusion Middleware and can be used in SOA and BPM suites. It allows business processes to be more agile and align with changing business demands by acting as a central rules repository.
- The document demonstrates how to create a rule in Oracle Business Rules using JDeveloper to calculate student grades based on average marks and test it using various methods like a debugging function, the Enterprise Manager console, and SOAP UI web services calls.
- A decision table rule is created to return a grade based on comparing average marks to ranges in a bucketset. The rule can then be tested by passing sample data and evaluating the output.
1. QA Tester Jacky Liu
Hardware:
Windows XP ,IE
7,Toad
MySQL,TEMS
V_3.6
Requirement
Version:
Test Name Scen. # Scenario Description Case Description Test Description Test Step Description Test Data Expected Results Actual Results
Pass
(Y/N)
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search By
Inputting Vendor
Name_Positive
Test
Sc1 Data Preparation Prepare Test Data
Prepare Test Data at
Backend
Step 1
Click Toad for MySQL 6.0
Freeware
Enter Host :192.168.1.78
User:root
Password: ccmqa!
Port:3306
Database:ccmqa_db
Execute the following query
to find data that can be
searched in Target Search
page:
select i.* from target i ;
Records exist from
Target table for use in
Search function
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting Vendor
Name_Positive
Test
Sc2 Enter Single Search Criteria
Enter Single Search Condition-
Use of Vendor Criteria-
Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1 TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Single Search by
Selecting Vendor
Criteria-Positive Test
Step3
Click the Dropdown list on
Vendor input textbox and
select 'ALLSTREAM' from
list
Vendor :'ALLSTREAM'
ALLSTREAM' will be
displayed on Vendor input
textbox.
Step 4
Enter default value'All' on
BAN, Circuit Number
,Charge Type and Created
By.
Tick mark Target Amount
BAN: All
Circuit Number:All
Charge Type:All Created
By:All and Target
Amount tick mark
Default Values will be
displayed on other input
textbox.
Step 5 Click the' Search' button
Headers above listing
must be 'Change
Percentage(%)' and
'Variation
Percentage(%)'. All
records with Vendor
ALLSTREAM will display
and several buttons at the
bottom of the search
result grid: <Download to
Excel>button,
<Copy>button, <Actual
Result>button and
Headers above
listing shows
only 'Change
Percentage'
and 'Variation
Percentage' no
(%) symbol
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting Vendor
Name_Negative
Sc3 Enter Single Search Criteria
Enter Single Search Condition
-Use of Invalid Vendor
Criteria_Negative test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar The 'Target Search'
Functionality Screen will
display
2. Single Search Criteria
by Invalid Vendor
Criteria
Step 3
Enter blank character value
on Vendor name
Vendor :' '
Blank will be displayed on
Vendor input textbox.
Step 4
Enter default value'All' on
BAN, Circuit Number
,Charge Type and Created
By and click 'Search' button.
BAN:All Circuit
Number:All
Charge Type:All
Created By:All and
Target Amount tick.
Windows IE Pop up error
message will show 'You
must enter search
criteria!'
Step 5 Click OK button
Screen will display with
no error and ready to
accept Vendor name.
Single Search Criteria
by Invalid Vendor
Criteria
Step 6
Enter special character value
on Vendor name
Vendor :'@@'
@@' will be displayed on
Vendor input textbox.
Step 7
Enter default value'All' on
BAN, Circuit Number
,Charge Type and Created
By.
BAN:All Circuit
Number:All
Charge Type:All
Created By:All and
Target Amount tick
Default values will be
displayed on other input
textbox.
Step 8 Click the' Search' button
Windows IE Pop up error
message will show 'You
must enter search
criteria!'
Step 9 Click OK button
Screen will display with
no error and ready to
accept Vendor name.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting All
BAN_Positive Test
Sc4 Enter Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
All BAN)_Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Selecting All BAN
Step 3
Enter 'blank' on Vendor.
Click the Dropdown list on
All BAN input textbox and
select '4902017' from list
Vendor :' '
BAN: All;
All BAN:4902017
4902017' will be
displayed on All BAN
input textbox.
Step 4
.Enter default value'All' on
Circuit Number ,Charge
Type and Created By.
Tick mark Target Amount
Circuit Number:All
Charge Type:All Created
Default Values will be
displayed on other input
textbox.
Step 5 Click 'Search' button. Search result grid will
show all targets with BAN
= 4902107
Step 6
Enter Vendor:ALLSTREAM
BAN:4902017 and default on
others and click 'Search'
button.
Search result grid will
show all targets with
ALLSTREAM and BAN =
4902107
Step 7
Re select the BAN value
.Click the 'Backspace' 2
times.
Screen should remain in
Target maintenance
Screen
navigated on
Wiki screen
instead of
staying on
Target
Bug
3. TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Selecting
BAN_Positive Test
Sc5
Enter Search
Conditions(Multiple Search
Criteria)
Enter Search
Conditions(Multiple Search) -
Use of Vendor+Valid BAN
Criteria_Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Selecting Vendor, BAN
Criteria-Positive Test
Step 3
Enter 'ALLSTREAM' on
Vendor. Click the Dropdown
list on BAN input textbox
and select '4460' from list
Vendor :'ALLSTREAM'
BAN: 4460
4460' will be displayed on
BAN input textbox.
Step 4
.Enter default value'All' on
Circuit Number ,Charge
Type and Created By.
Tick mark Target Amount
Circuit Number:All
Charge Type:All Created
By:All and Target
Amount tick mark
Default Values will be
displayed on other input
textbox.
Step 5 Click the' Search' button
Search result grid will
display 'No records found'
since no records for
ALLSTREAM with BAN
4460.
Step 6
Click the Dropdown list on
BAN input textbox and select
'4902017' from list
4902017' will be
displayed on BAN input
textbox.
Step 7
Click the Search button All ALLSTREAM records
with BAN '4902017' will
display on search result
grid.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Selecting Circuit
Number_Positive
Test
Sc6
Enter Search
Conditions(Multiple Search)
Enter Search
Conditions(Multiple Search) -
Use of
Vendor+BAN+Selected
Circuit Number Criteria-
Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Selecting
Vendor,BAN,Circuit
Number Criteria-
Positive Test
Step3
Vendor :'ALLSTREAM'
BAN:4902017
Click the Dropdown list on
Circuit Number input textbox
and select '9024778848'
from list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number :
9024778848
9024778848' will be
displayed on Circuit
Number input textbox.
Step 4
.Enter default valueCharge
Type and Created By.
Tick mark Target Amount
Charge Type:All Created
By:All and Target
Amount tick mark
Default Values will be
displayed on other input
textbox.
Step 5 Click the' Search' button
Search result grid will
display 'No records found'
since no records for
ALLSTREAM with Circuit
Number 9024778848.
Step 6
Click the Dropdown list on
Circuit Number input textbox
and select '770100019' from
list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number :
770100019
770100019' will be
displayed on Circuit
Number input textbox.
4. Step 7 Click the Search button
All ALLSTREAM vendor
records with Circuit
Number '770100019' will
display on search result
grid.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search
(Multiple Search)
By Selecting
Charge
Type_Positive Test
Sc7
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Pre-selected
Circuit Number + select
Charge Type-Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search With
Vendor+BAN+Pre-
selected Circuit Number
and select Charge Type
Criteria
Step3
Vendor :'ALLSTREAM'
BAN:4902017
Enter Circuit
Number:770100019
Click the Dropdown list on
Charge Type input textbox
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Dropdownlist will show
the ids from charge type
table 2 to 8 i.e
LPC,MRC,Usage,OCC,A
djustment,Credit ,Tax
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search
(Multiple Search)
By Selecting
Charge
Type_Positive Test
Sc8
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Default Circuit
Number + select Charge
Type-Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar The 'Target Search'
Functionality Screen will
display
Do Multiple Search With
Vendor+BAN+Default
Circuit Number and
select Charge Type
Criteria
Step 3
Vendor :'ALLSTREAM'
BAN:4902017
Enter Circuit Number:All
Click the Dropdown list on
Charge Type input textbox
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number :All
Dropdownlist will show
the ids from all charge
type table i.e
LPC,MRC,up to
calculated_current_due
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search
(Multiple Search)
By Selecting
Charge
Type_Positive Test
Sc9
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+ Circuit
Number + select Charge
Type-Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Vendor+BAN+Circuit
Number +Selecting
Charge Type Criteria
with no records resulted
Step 3
Click the Dropdown list on
Charge Type input textbox
and select 'Credit' from list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:Credit
Credit' will be displayed
on Charge Type input
textbox.
Step4
Click the Search button Search result grid will
display 'No records found'
since no records for
ALLSTREAM ,BAN
4902017 , Circuit No
770100019 with Charge
Do Multiple Search by
Vendor+BAN+Circuit
Number +Selecting
Charge Type Criteria
with records resulted
Step 5
Click the Dropdown list on
Charge Type input textbox
and select 'LPC' from list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:LPC
LPC' will be displayed on
Charge Type input
textbox.
5. Step 6
Click the Search button. Sort
by the Target Amount
column.
All ALLSTREAM vendor
records with BAN
'4902017' , Circuit
Number
'770100019',Charge Type
'LPC' will display on
search result grid.
Use Toad MySQL to
verify the selected
search criteria
Step 7
Use Toad MySQL(see Toad) All ALLSTREAM vendor
records with BAN
'4902017' , Circuit
Number
'770100019',Charge Type
'LPC' will display on
SQL.
Use Toad MySQL to
verify the number of
selected search criteria
Step 8
Use Toad MySQL(see Toad) SQL gives the correct no
of records based on
Multiple Search criteria.
Step 9 Click Next Page arrow
Search result grid will
show Page 2
Step 10
Click Last Page arrow Search result grid will
show last page no
Use Toad MySQL to
verify the selected
search criteria
Step 11
Use Toad MySQL to display
the last page records (see
Toad)
SQL gives the same
records as displayed on
Target Search screen's
last page.
Step 12 Click Previous page arrow
Search result grid will
show previous
Use Toad MySQL to
verify the selected
search criteria
Step 13
Use Toad MySQL to display
the previous to last page
records (see Toad)
SQL gives the same
records as displayed on
Target Search screen's
previous to last page.
Step 14
Filter the Target Amount to
contain only values > 5000.
Listing will display only
Target Amount > 5000
Use Toad MySQL to
verify the selected
search criteria
Step 15
Use Toad MySQL to display
the filter records i.e Target
Amount > 5000 (see Toad)
SQL gives the same
records as displayed on
Target Search screen's
using filter(target Amount
> 5000).
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Selecting Created
By-Positive Test
Sc10
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit Number
+ Charge Type +Selected
Created By Criteria -Positive
Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number + Charge Type
+Selected Created By
Criteria with no records
resulted
Step 3
Click the Dropdown list on
Created By input textbox and
select 'Gloria Smith ' from
list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:LPC
Created By: Gloria
Smith
Gloria Smith ' will be
displayed on Created By
input textbox.
Step 4
Click the Search button Search result grid will
display 'No records found'
since no records for
ALLSTREAM with
Created By Gloria Smith .
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number + Charge Type
+Selected Created By
Criteria with records
resulted
Step 5
Click the Dropdown list on
Created By input textbox and
select 'Faye Ding ' from list
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:LPC
Created By: Faye Ding
Faye Ding' will be
displayed on Created By
textbox.
6. Step 6
Click the Search button All records with Created
By 'Faye Ding' under the
search criteria will display
on search result grid.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Variation
Percentage_Positiv
e Test
Sc11
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation
Percentage(%)_Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation Percentage(%)(3
digits positive whole
numbers)
Step 3
Leave blank on Variation
Percentage and click
'Search' button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage
:blank
All ALLSTREAM records
based on search criteria
will all show. It includes
with or without Variation
Percentage values.
Do Multiple Search by
selecting
Vendor+BAN+Circuit
Number+Charge
Type+Created
By+Target Amount +
Variation Percentage
Criteria- Validate
according to rule (3
digits positive whole
numbers)
Step 4
Enter 003 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:003
Search result grid will
display records for
ALLSTREAM ,BAN
4902017 , Circuit No
770100019 with Var
Percentage of 003
The search
result grid
displayed
records with
0.03 Var
Percentage
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search
(Multiple Search)
By Variation
Percentage_Negati
ve Test
Sc12
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Invalid Variation
Percentage(%)-Negative Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Unable Search by
Variation Percentage
Criteria(3 digits whole
number with a
maximum length of 3)-
Use of invalid
characters
Step 3
Enter VariationPercentage
with character value and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage
:we$%
Variation Percentage
input textbox is
highlighted.
Unable Search by
Variation Percentage
Criteria(3 digits whole
numbers with a
maximum length of 3)-
Use of negative value
Step 4
Enter VariationPercentage
with a negative value and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage :-
025
Pop up error msg should
be displayed 'Variation
Percentage(%) Field
cannot be negative.'.
Pop up error
msg displays
'No records
found.'
BUG
7. Step 5
Enter 0.222 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:0.222
Pop up Error message
should say Variation
Percentage(%) Field Only
allowed to input up to 3
positive digits.
The search
result grid
displayed 'No
records found'
BUG
Step 6
Enter 8.123 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:8.123
Pop up Error message
should say Variation
Percentage(%) Field Only
allowed to input up to 3
positive digits.
The search
result grid
displayed
records with
Variation
Percentage of
0.08
BUG
Step 7
Enter 0.123 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:0.123
Pop up Error message
should say Variation
Percentage(%) Field Only
allowed to input up to 3
positive digits.
The search
result grid
displayed 'No
records found'
BUG
Step 8
Enter 101 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:101
Error message should
say Variation
Percentage(%) Field Only
allowed between 0 to
100 %
The search
result grid
displayed 'No
records found'
BUG
Step 9
Enter 50.1234 on Variation
Percentage % input textbox
and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount selected
Variation Percentage(%)
:50.1234
Pop up Error message
should say Variation
Percentage(%) Field Only
allowed to input up to 3
positive digits.
The search
result grid
displayed 'No
records found'
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search By
Target Amount
_Positive Test
Sc13
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+ Variation
Percentage(%)+Target
Amount _Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
8. Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation
Percentage(%)+Target
Amount _Positive Test
Step 3
Leave blank value on Target
Amount
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount: blank
value and Variation
Percentage (%):blank
Blank value on Target
Amount input box
Step 4
Click the Search button Search result grid will
show records for any
value of Target Amount
from Target table
Allow Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation
Percentage(%)+Valid
positive Target Amount
Step 5
Enter Target amount of
5555.55 on input box and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Target Amount
:5555.55
Search result grid will
show records for Target
Amount equal to
5555.55.
Allow Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation
Percentage(%)+Valid
negative Target Amount
Step 6
Enter Target Amount with
negative value and click
Search button
Vendor :ALLSTREAM
BAN: 4902017 Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount :-70.00
Variation Percentage
(%):blank
Search result grid will
show records for negative
value of Target Amount
from Target table
Pop up error
msg displays
'Target Amount
Field Only
allowed to input
2 decimal
places'.
BUG
Step 7
Enter Target Amount with 18
zeros and 2 zeros decimal
places and click Search
button
Vendor :ALLSTREAM
BAN: All Circuit
Number:All Charge
Type:All Created By:All
Target Amount tick mark
:000000000000000000.0
0
Search result grid will
show records with Target
amount of 0.00
Step 8
Enter Target Amount with 19
zeros and 2 zeros decimal
places and click Search
button
Vendor :ALLSTREAM
BAN: All Circuit
Number:All Charge
Type:All Created By:All
Target Amount tick mark
:0000000000000000000.
00
Search result grid will
show records with Target
amount of 0.00
TEMS_v3.6
Application Rogers
TEMS -Use of
Target Search By
Invalid Target
Amount_Negative
Test
Sc14
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation
Percentage(%)+Invalid Target
Amount-Negative Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Invalid character Target
Amount
Criteria_Negative Test
Step 3
Enter Target Amount with
character value and click
Search button
Vendor :ALLSTREAM
BAN: 4902017 Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount :xyz.@&
Variation Percentage
(%):blank
Target Amount input
textbox is highlighted.
9. Do Multiple Search by
Target Amount Criteria-
Validate according to
rule( 2 decimal points
only with maximum
length of 20)
Step 4
Enter Target Amount with
more than 2 decimal places
and click Search button
Vendor :ALLSTREAM
BAN: 4902017 Circuit
Number:770100019
Charge Type:LPC
Created By:All
Target Amount
:5555.123
Variation Percentage
(%):blank
Pop up window will show
Target Amount Field Only
allowed to input 2 decimal
places
Do Multiple Search by
Target Amount Criteria-
Validate according to
rule( 2 decimal points
only with maximum
length of 20)
Step5
Enter Target Amount with
more than 20 digits like 23
digits and click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Target Amount
:1000000000000000055
55.55
Pop up window should
show error msg Target
Amount Field must be
only up to 20 digits .
Pop up window
shows Target
Amount Field
Only allowed to
input 2 decimal
places
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Change
Amount_Positive
Test
Sc15
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+ Variation
Percentage(%)+ Change
Amount _Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
by use of
Vendor+BAN+Circuit
Number+Var
Percentage+Charge
Type+Change Amount
Criteria- Validate
according to rule( 2
decimal points only with
maximum length of 20)
Step 3
Enter Change Amount with
only 2 decimal places and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Amount :100.10
Search result grid will
show records for Change
Amount equals 100.10
Enter Multiple Search by
use of
Vendor+BAN+Circuit
Number+Var
Percentage+Charge
Type+Change Amount
Criteria- Validate
according to rule( 2
decimal points only with
maximum length of 20)
Step 4
Enter Change Amount with
negative value i.e -10.00 and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Amount :-10.10
Search result grid should
display target records
with inputted change
amount(negative values
are allowed)
Pop up error
msg displays
'Change
Amount Field
Only allowed to
input 2 decimal
places'.
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Change
Amount_Negative
Test
Sc16
Enter Search
Conditions(Multiple Search)
Do Multiple Search Conditions-
Use of Vendor+BAN+Circuit
Number+Charge Type
+Created By+ Variation
Percentage(%)+ Change
Amount _Negative Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
Conditions-Use of
Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation Percentage(%)+
invalid Change Amount
_Negative Test
Step 3
Enter Change Amount with
characters and click Search
button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Amount :rrr@#$
Change Amount input
textbox is highlighted.
10. Do Multiple Search by
use of
Vendor+BAN+Circuit
Number+Var
Percentage+Charge
Type+Change Amount
Criteria()- Validate
according to rule ( 2
decimal points only with
maximum length of 20)
Step 4
Enter Change Amount with
decimal places and click
Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Amount
:100.123
Pop up window will show
Change Amount Field
Only allowed to input 2
decimal places
Do Multiple Search by
use of
Vendor+BAN+Circuit
Number+Var
Percentage+Charge
Type+Change Amount
Criteria()- Validate
according to rule ( 2
decimal points only with
maximum length of 20)
Step 5
Enter Change Amount with
decimal places and click
Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Amount :-
100.123
Pop up window will show
Change Amount Field
Only allowed to input 2
decimal places
Do Multiple Search by
use of
Vendor+BAN+Circuit
Number+Var
Percentage+Charge
Type+Change Amount
Criteria(use >20 digits)-
Validate according to
rule( 2 decimal points
only with maximum
length of 20)
Step 6
Enter Change Amount with
more than 20 digits like 23
digits and click Search button
Change Amount
:1000000000000000001
00.10
Pop up window should
show error msg Change
Amount Field must be
only up to 20 digits .
Pop up window
shows error
msg Change
Amount Field
Only allowed to
input 2 decimal
places
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Change
Percentage(%)_Po
sitive Test
Sc17
Enter Search
Conditions(Multiple Search)
Do Multiple Search Conditions-
Use of Vendor+BAN+Circuit
Number+Charge Type
+Created By+Default
Variation Percentage(%)+
Change Percentage(%)
_Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Use of
Vendor+BAN+Circuit
Number+Charge
Type+Var
Percntage(%)+Created
By+Change Percentage
Criteria(use of max 3
positive whole digits) -
Positive Test
Step 3
Leave blank value on
Change Percentage
Vendor :ALLSTREAM
BAN: All
Circuit Number:All
Charge Type:All
Variation Percentage(%)
=blank Created By:All
Change Percentage :
blank value
Blank value on Change
Percentage input box
Step 4
Click the Search button Search result grid will
show records for any
value of Change
Percentage and other
selected criteria
11. Do Multiple Search by
Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
Change Percentage
Criteria-Validate
according to rule (can
be up to max 3 digits
positive whole numbers)
Step 5
Enter Change
Percentage(%) with 100
and click 'Search' button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage
:100
Search result grid will
show records for Change
Percentage(%) equals
100
Do Multiple Search by
Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created
By+Change Percentage
Criteria-Validate
according to rule (can
be up to max 3 digits
positive whole numbers)
Step 6
Enter Change
Percentage(%) with 5 and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage :5
Search result grid will
show records for Change
Percentage(%) equals 5
Do Multiple Search by
Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
Change Percentage
Criteria-Validate
according to rule (can
be up to max 3 digits
positive whole numbers)
Step 7
Enter Change
Percentage(%) with 0 and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage :0
Search result grid will
show records for Change
Percentage(%) equals 0
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Change
Percentage(%)_Ne
gative Test
Sc18
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ Invalid Change
Percentage(%)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
by Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
Invalid character
ChangePercentage
Criteria
Step 3
Enter Change Percentage
(%)with characters and click
Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage
:xx&&
Change Percentage (%)
input textbox is
highlighted.
Enter Multiple Search
by Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
ChangePercentage
Criteria(Validate accdg
to up to max 3 positive
whole nos)
Step 4
Enter Change
Percentage(%) with 3
decimal places and click
Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage
:100.123
Error message should
say Change
Percentage(%) Field Only
allowed between 0 to
100 %
Pop up window
will show
Change
Percentage (%)
Field Only
allowed to input
2 decimal
places
BUG
12. Enter Multiple Search
by Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
ChangePercentage
Criteria(Validate accdg
to up to max 3 positive
whole nos)
Step 5
Enter Change
Percentage(%) with more
than 3digits like 4 digits and
click Search button
Vendor :ALLSTREAM
BAN: 4902017
Circuit
Number:770100019
Charge Type:LPC
Variation Percentage
(%):blank
Created By:All
Change Percentage
:1234
Error message should
say Change
Percentage(%) Field Only
allowed between 0 to
100 %
Pop up window
shows listing
with 'No
records found'
instead of error
msg .
BUG
Enter Multiple Search
by Use of
Vendor+BAN+Circuit
Number+ChargeType+
Var %+Created By+
ChangePercentage
Criteria(Validate accdg
to up to max 3 positive
whole nos)
Step 6
Enter Change Percentage
(%) value more than 100 %
and click Search button
Vendor :ALLSTREAM
BAN: All Circuit
Number:All Charge
Type: All Variation
Percentage(%) =blank
Created By:All
Change Percentage(%)
:102.00
Error message should
say Change
Percentage(%) Field Only
allowed between 0 to
100 %
Search result
grid shows 'No
records found' .
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By Target
Period
From/To_Positive
Test
Sc19
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ Target Amount+
Target Period From/To -
Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search by
Use
Vendor+BAN+Circuit
No+Charge Type +Var
%+Created By+Target
Amount+ - Use of
Default Target Period
From and To
Step 3
Leave blank value on Target
Period From and To and
Click the 'Search' button.
Vendor :ALLSTREAM
BAN: 4902017 Circuit
Number: 770100019
Charge Type:LPC
Variation Percentage(%)
=blank Created By:Faye
Ding Target Amount:
blank value
Target Period From
=blank Target Period To
=blank
Search result grid will
show records for all
records of Vendor
ALLSTREAM satisfying
search criteria(includes
any values on Target
Period from and to)
Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Target period from
date is less or equal
than the Target period
To)
Step 4
Enter Search Target Period
From with valid value and
click Search button
Target Period
From:201210 and
Target Period To:blank
Search result grid will
show records whose
search Period from is
less than or equal to data
Period From
Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Target period from
date is less or equal
than the Target period
To)
Step 5
Enter Search Target Period
From with valid value and
click Search button
Target Period
From:201211 and
Target Period To:blank
Search result grid will
show records whose
search Period from is
less than or equal to data
Period From
13. Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Search Target
Period from date is
greater than the data
Target Period From)
Step 6
Enter Search Target Period
From with valid value and
click Search button
Target Period
From:201215 and
Target Period To:blank
Search result grid will
show 'No records found'
since search Period from
is greater than data
Period From
Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Search Target
Period To date is
greater than the data
Target Period To)
Step 7
Enter Target Period To with
valid value (greater than
Data from period ) and click
Search button
Target Period From :
blank and Target Period
To:201512
Search result grid will
show records whose
search Period To is
greater or equal than
data Period To
Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Search Target
Period Fr >= Data
Target Period Fr and
Search Target Period To
<= Data Target Period
To)
Step 8
Enter Target Period To and
From with valid value (equal
to values on data) and click
Search button
Target Period From :
201211 and Target
Period To:201311
Search result grid will
show records satisfying
search criteria since data
exist with same values
Enter Multiple Search
By Target Period
Criteria-Validate
according to
Rule(Search Target
Period Fr >= Data
Target Period Fr and
Search Target Period To
<= Data Target Period
To)
Step 9
Enter Target Period To and
From with valid value (equal
to values on data) and click
Search button
Target Period From :
201210 and Target
Period To:201401
Search result grid will
show records satisfying
search criteria since data
exist within the Search
Period From and To
values
Step 10
Enter Target Period From is
above Data Period but less
than Target PeriodTo and
click Search button
Target Period From :
201212 and Target
Period To:201311
Search result grid will
show 'No records found'.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By Target
Period
From/To_Negative
Test
Sc20
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount+ Target Period
From/To-Negative Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
by Use of
Vendor+BAN+Circuit
No+Charge Type
+Var%+Created By+
Target Amt + Invalid
character Target Period
From Criteria
Step 3
Enter Target Period From
with characters and click
Search button
Target Period
From:aaaa%& and
Target Period To:blank
Target Period From input
textbox is highlighted-
means not allowed
14. Enter Multiple Search
by Use of
Vendor+BAN+Circuit
No+Charge Type
+Var%+Created By+
Target Amt + Invalid
character Target Period
To Criteria
Step 4
Enter Target Period To with
characters and click Search
button
Target Period From :
blank and Target Period
To:qwe#$%
Target Period To input
textbox is highlighted -
means not allowed.
Step 5
Enter Target Period From
greater than value of Target
PeriodTo and click Search
button
Target Period From :
201301 and Target
Period To:201211
Search result grid will
show 'No records found'.
Popup error
msg should
give Target
Period From
must be less
than or equal to
Target Period
To.
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Created Date
From/To_Positive
Test
Sc21
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ Target Amount+
Created Date From/To-
Positive Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do Multiple Search Conditions-
Use Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount+ Default Created
Date From/To
Do Multiple Search by
Use
Vendor+BAN+Circuit
No+Charge Type +Var
%+Created By+Target
Amount+ - Use of
Created Date From and
To
Step 3
Tick Created Date and leave
blank and click 'Search'
button
Vendor :ALLSTREAM
BAN: 4902017 Circuit
Number: 770100019
Charge Type:LPC
Variation Percentage(%)
=blank Created By:Faye
Ding Target Amount
blank value Tick
Created Date but No
value on From and To
Search result grid will
show records for all
records of Vendor
ALLSTREAM satisfying
search criteria any value
of Created Date
Enable Search By
Created Date Criteria-
Validate according to
Rule(Created From date
is less or equal to
Created Date To)
Step 4
Enter Created Date From
with valid value and click
'Search' button
Created Date
From:2014/04/04 and
Created Date To:blank
Search result grid will
show records whose
search Created Date
from is less than or equal
to data Created Date
Step 5
Enter Created Date From
with valid value and click
Search button
Created Date
From:2008/01/01 and
Created Date To:blank
Search result grid will
show records whose
search Created Date
from is less than or equal
to data Created Date
Step 6
Enter valid Created Date To
greater or equal than Data
Created Date
Created Date From :
blank and Created Date
To:2015/12/31
Search result grid will
show records whose
search Created Date To
is greater or equal than
data Created Date
Step 7
Enter valid Created Date
From and To equal to Data
Created Date
Created Date From
:2014/02/14 and
Created Date
To:2014/02/25
Search result grid will
show records whose data
Created Date is in range
of search Created Date
From and To.
Step 8
Enter valid Created Date
From is less or equal to
Created DateTo
Created Date From
:2014/04/08 is less
than Created Date
To:2014/04/09
Search result grid will
show records whose data
Created Date is inside
range of search Created
Date From and To.
15. TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) By
Created Date
From/To_Negative
Test
Sc22
Enter Search
Conditions(Multiple Search)
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ Target Amount+
Created Date From/To-
Negative Test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Cre
ated By+ Target Amount+
Invalid Created Date From
Step3
Enter Created Date From
with characters and click
Search button
Created Date
From:abcd&& and
Created Date To:blank
Created Date From input
textbox is highlighted.
Step 4
Enter Created Date To with
characters
Created Date From :
blank and Created Date
To:q@@rty
Created Date To input
textbox is highlighted.
Step 5
Enter Created Date From
with invalid day value (32>31
) and click Search button
Created Date
From:2008/01/32 and
Created Date To:blank
Created Date From input
textbox is highlighted
means not allowed.
Step 6
Enter invalid Created Date
From Greater than Created
DateTo
Created Date From
:2014/04/09 greater
than Created Date
To:2014/04/08
Popup error msg should
give Created Date From
must be less than or
equal to Creatred Date
To.
Result grid
shows "No
records found.'
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) -Use of
Clear button
Sc23
Enter Multiple Search
Conditions-Use of Clear
button
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount+ Target Period
From/To and Clear Function
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter Multiple Search
Criteria Entries
Step 3
Enter valid Search Criteria in
VENDOR,BAN,Circuit
Number ,Charge Type and
default on others and click
'Search' button
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:LPC
Search result grid will
display all records
according to
searchcriteria
Removable of Search
Criteria Entries via Clear
button
Step 4
Click the Clear button Search criteria will return
to default values
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) -Use of
Search Bottom
Functions
Sc24
Enter Multiple Search
Conditions-Use of Download
to Excel or Copy button
after Search
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount and Download to
Excel
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
16. Step 3
Enter valid Search Criteria in
VENDOR,BAN,Circuit
Number ,Charge Type,tick
mark Target Amount and
default on others
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:All
Target Amount -5555.55
Search criteria entries are
in input textboxes
Step 4 Click 'Search' button
Search result grid will
display all records
according to search
criteria .Bottom buttons
show for 'Download to
Excel', 'Copy', 'Actual
Download to Excel
records from the
Search Records
Step 5
Click 'Download to Excel'
button
Pop up should show
'Select target please!'
Pop up shows
with msg 'Do
you want to
open or save
this file?'
BUG
Step6
Select via tick mark on one
record with Allowed period
shift of 1
Selected record is with
tick mark
Step 7
Click 'Download to Excel'
button
Pop up shows with msg
'Do you want to open or
save this file?'
Step 8
Click 'Open' button or click
'Save' button or 'Cancel '
button.
If open , records of file
targetSearchExcel will
show selected records. If
cancel, upload will not
happen.
If save, give file name
and save to a specific
location.
If open,the
Uploaded excel
file contains all
records instead
of just the
selected
record.
BUG
Step 9
Select via tick mark on
records with Allowed period
shift of 1
The selected record is
with tick mark
Step 10
Click 'Download to Excel'
button after making selection
Pop up shows with msg
'Do you want to open or
save this file?'
Step 11
Click 'Open' button or click
'Save' button or 'Cancel '
button.
If open , records of file
targetSearchExcel will
show selected records. If
cancel, upload will not
happen.
If save, give file name
and save to a specific
location.
If open,the
Uploaded excel
file contains all
records instead
of just the
selected
record.
BUG
Copy records from
the Searched Records
Step 12 Click the Copy button
The copied record is the
only left on screen and
the screen shows
different bottom buttons
namely
'Add','Copy','Save','Delet
e','Upload Excel',
'Verification'.
Step 13
Select via tick mark on
records with Allowed period
shift of 1
The selected record is
with tick mark
Sc25
Enter multiple Search -
Continue from Search
function to Create New
Target
Copy records from the
Searched Records
Step 14
Click the 'Copy' button as if
in Create New Target
The screen shows the
added record.
Step 15
Select via tick mark on the
copied record
The screen shows the
added record with tick
mark (this record is
exactly same as the
original record). Two
records now exist with
tick marks
17. Step 16 Click the 'Save' button
The screen should show
an error msg "Record
already exists . It must be
unique'
Popup error
msg shows a
non- friendly
message.
BUG
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) -Use of
Search Bottom
Functions
Sc26
Enter Multiple Search
Conditions-Use of Actual
Result and Verification
Buttons after Searching
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount and Use Actual result
button
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter multiple Search
conditions
Step 3
Enter valid Search Criteria in
VENDOR,BAN,Circuit
Number ,Charge Type,tick
mark Target Amount and
default on others
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:All
Target Amount -5555.55
Search criteria entries are
in input textboxes
Step 4 Click Search button
Search result grid will
display all records
according to search
criteria .Bottom buttons
show for 'Download to
Use of 'Actual Result '
from the Search
Records
Step 5 Click 'Actual Result ' button
Pop up should show
'Please select one or
more records'
Step 6
Select via tick mark on one
record with Allowed period
shift of 1
Selected record will be
with tick mark
Step 7 Click 'Actual Result ' button
Target Result list pop-up
will show for the chosen
target with buttons
below'Download to CSV'
or 'Close'button.
Step 8
Click 'Download to CSV'
button . If not , click 'Close'
from Target Result list
Pop up will show with
msg 'Do you want to
open or save this file?
Bottom buttons will show
Open,Save or Cancel
Step 9
Click 'Open' button or click
'Save' button or 'Cancel '
button.
If open , records of file
targetSearchExcel will
show selected records. If
cancel, download will not
happen and stay on
Search screen.
If save, give file name
and save to a specific
location.
Step 10
or from Step 8, choose Click
'Close' button on target
Result list Pop up .
Search listing will still
show.
Step 11 Click the Copy button
The copied record is the
only left on screen and
the screen shows
different bottom buttons
namely
'Add','Copy','Save','Delet
e','Upload Excel',
'Verification'.(Use in
Create New Target
18. Step 12
Select via tick mark on
records with Allowed period
shift of 1
The selected record is
with tick mark
Step 13 Click the Copy button
The copied record will
show on the display with
the original record.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Multiple
Search) -Use of
Search Bottom
Functions
Sc27
Enter Multiple Search
Conditions-Use of
Verification Button after
Searching
Enter Multiple Search
Conditions-Use
Vendor+BAN+Circuit
Number+Charge
Type+VarPercentage+Create
d By+ tick mark Target
Amount and Use Actual result
button
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Enter multiple Search
conditions
Step 3
Enter valid Search Criteria in
VENDOR,BAN,Circuit
Number ,Charge Type,tick
mark Target Amount and
default on others
Vendor :'ALLSTREAM'
BAN:4902017
Circuit Number
:770100019
Charge Type:All
Target Amount -5555.55
Search criteria entries are
in input textboxes
Step 4 Click Search button
Search result grid will
display all records
according to search
criteria .Bottom buttons
show for 'Download to
Excel', 'Copy', 'Actual
Result' and 'Verification'
Use of Verification
button from the Search
Records without
preselected rcd
Step 5 Click 'Verification' button
Pop up should show
'Please select one or
more records'
Nothing
happens
BUG
Step 6
Select one record for
verification
The grid will show tick
mark for selected target.
Use of Verification
button from the Search
Records with tick mark
Step 7 Click 'Verification ' button
Target Result list pop-up
will show for the chosen
target with buttons
below'Download to CSV'
or 'Close'button.
Step 8
Click 'Download to CSV'
button from target Result
List. If Close , go to Step 13.
Pop up will show with
msg 'Do you want to
open or save this file?
Bottom buttons will show
Open,Save or Cancel
Step 9
Click 'Open' or 'Save' or
'Cancel' button.
If open , records of file
targetResultExcel will
show. If cancel, download
will not happen and stay
on Search screen.If Save
is click , saving into file
will happen.
If save, give file name
and save to a specific
Step 10
From Step 9,Click 'Cancel'
button
Back to Search
screen.No Download will
happen.
Step 11
From step 9,Click 'Open'
button
Record listing will display
on file targetResultExcel.
19. Step 12
From Step 9,Click 'Save'
button
An excel
file(targetResultExcel.xls)
is outputted and saved on
a location.
Step 13 Click 'Close' button
Back to Search
screen.No Download will
happen.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting Charge
Sc28 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Charge Type)-Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Selecting Charge Type
Step 3
Default values on others and
Click the Dropdown list on
Charge Type and select
'LPC' from list.Click 'Search '
button.
Vendor :' '
BAN: All;
All BAN:' '
Charge Type : LPC
Search result grid will
show all targets with
Charge Type of 'LPC'
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting Var
Percentage (%)
Sc29 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Var %)-Positive test
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1 TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar The 'Target Search'
Functionality Screen will
display
Do single Search by
entering Var %
Step 3
Default values on others and
Enter '300' on Var %.Click
'Search' button.
Variation Percentage
(%):300
Search result grid will
show all targets with Var
Percentage (%) of 300
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Selecting Created
By
Sc30 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Created By
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1 TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Created By
Step 3
Default values on others and
Slect 'Faye Ding' on Created
By.Click 'Search' button.
Created By:Faye
DingVariation
Search result grid will
show all targets with
Created By Faye Ding
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
SelectingTarget
Amount
Sc31 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Target Amount)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Target Amount
Step 3
Default values on others and
enter 5555.55 on Target
Amount . Click 'Search'
button.
Target Amount :
5555.55
Search result grid will
show all targets with
Target Amount of
5555.55
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Sc32 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Change Amount)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
20. Do single Search by
Change Amount
Step 3
Default values on others and
enter 100.00 on Change
Amount . Click 'Search'
button.
Change Amount :
100.00
Search result grid will
show all targets with
Change Amount of
100.00
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Sc33 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Change Percentage)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Change Percentage
Step 3
Default values on others and
enter 10.00 on Change
Percentage . Click 'Search'
button.
Change Percentage :
10.00
Search result grid will
show all targets with
Change Percentage of
10.00
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Sc34 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Target Period From)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Target Period From
Step 3
Tick mark target Period
From. Default values on
others and enter 201210 on
Target Period From . Click
'Search' button.
Target period From :
201210.
Search result grid will
show all targets with
Search Target Period
From of 2012/11 less
than or equal than the
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Sc35 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Target Period To)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Target Period To
Step 3
Tick mark target Period
From. Default values on
others and enter 201412 on
Target Period To . Click
Target period To :
201412.
Search result grid will
show all targets with
Search Target Period To
of 201412 greater than
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Entering Created
Date From
Sc36 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Created Date From)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Created Date From
Step 3
Tick mark target Created
Date. Default values on
others and enter 2012/01/01
on Created Date From .
Click 'Search' button.
Created Date from:
2012/01/01.
Search result grid will
show all targets with
Search Created Date
From of 2012/01/01 is
less than or equal than
the dataCreated Date
From.
TEMS_v3.6
Application Rogers
TEMS -Use of
Target
Search(Single
Search) By
Entering Created
Date To
Sc37 Other Single Search Criteria
Enter Single Search Criteria
(selecting all targets based on
Created date To)
Login to TEMS system Step 1
login TEMS webpage with
URL:
http://192.168.1.78,
Username:system and
Password:1
TEMS webpage should
be opened successfully
Go to Target Search
Screen
Step 2
Click on 'Target' tab on the
menu bar
The 'Target Search'
Functionality Screen will
display
Do single Search by
Created date To
Step 3
Tick mark Created date .
Default values on others and
enter 2014/04/30 on Created
Date To . Click 'Search'
button.
Created Date To:
2014/04/30
Search result grid will
show all targets with
Search Created Date
To of 2014/04/30
greater than or equal to
the data Created date to.