46. TCI does not replace the existing system, it complements it.
47. The PLC still provides basic control, the TCI provide the optimization.
48. Why can’t the PLC design be upgraded to perform the TCI tasks?
49. The TCI provides control algorithms and speed that is not possible within the PLC environment.
50.
51. TechColdInternationalIndustrial Refrigeration Control TCI Analysis and Proposal 1) Data Input to Simulation Model 2) System/ Cost Modeling With and without TCI TCI Energy Savings TCI capital cost Payback Period Other Considerations Desuperheater attractiveness Heat pump attractiveness 3) Proposal Submission
54. To allow each controls component to operate where it fits bestThe PLC to do the basic house work and alarming. The TCI to determine the higher end control and to indicate the results to the PLC for final I/O (Input/Output) control.
58. For this reason, when a variable speed device is available, it is prudent to operate it as the trimming machine as much as is possible.
59. TCI will accommodate this by determining which compressors (based on capacity) should be turned on and off in order to attempt to keep the variable speed compressor within its 50% to 100% range.
60.
61. TCI’s Energy Consumption Advantages Dynamic Discharge Pressure Control Courtesy: UofW Compressor + Condenser Power (hp)
72. Contact Information For more information regarding TCI products or service, please contact TechCold International at: Head Office: TechCold International 127 Rocky Road Keswick Ridge, NB, Canada E6L 1V1 Toll Free: 1-800-807-DATA(3282) http://www.techcold.com