T racer user_guide_android

Tracer Android | User Guide
Esta Guía está Disponible en Español en www.EspiaCelular.net
TRacer Mobile Phone Spy App by Killer Mobile®

2
Killer Mobile Software LLC will not be held responsible and accepts no liability for any unlawful or illicit use of any of its applications, and will use any technique available to prevent continued unlawful use including deactivation of the license or the remote web account where any data may be stored in the event a complaint is received.
Data Transmission Notice
TRacer uses your device's IMEI as the identifier for our Trial feature as well as for uploading user data to our servers & your web panel account per your application settings. Based on your settings, the application will also report and store GPS, Location, Call Logs, Recorded Audio, SMS, Emails, Website URLs, Contacts and/or other data to the server, as well as use your Data Connection, Send & Receive SMS's and Make/Answer Calls. This information is not shared with anyone outside of Killer Mobile Software LLC, nor will it be accessed by anyone at Killer Mobile Software LLC. This data can be deleted by you from your web account at any time. No backup of this data is made by us if you choose to delete this data.
You also acknowledge that you are the owner of the device that the application is being installed on and that you accept sole responsibility for any legal actions, either criminal or civil that result from the use of this application.

3
Table of Contents
1. Introduction .................................................................................................................4
2. Installation/Uninstallation .......................................................................................5
3. Registration ..................................................................................................................5
4. Application Settings ..................................................................................................6
5. SIM change notification ...........................................................................................8
6. Password Setting........................................................................................................9
7. Store/retrieve setting from server ..................................................................... 10
8. Report to ..................................................................................................................... 11
9. Call Recording ........................................................................................................... 13
10. After call recording .................................................................................................. 15
11. Spy calls ...................................................................................................................... 17
12. Enable Photo Taking ............................................................................................... 18
13. Enable Video Recording ......................................................................................... 18
14. Enable Audio Record ............................................................................................... 19
15. General Mobile Data ................................................................................................ 19
16. Device Media Storage ................................................................................................ 20
17. Third party application .............................................................................................. 20
18. SMS Commands .......................................................................................................... 21
19. Root Notice.................................................................................................................... 23
20. Web Panel / Server .................................................................................................... 23

4
1. Introduction
TRacer is a Discreet Mobile Phone Spy & Tracking Application TRacer is ideal for tracking mobile activity & backing up Device Data of Employees, Family (when appropriate) or for personal usage.
The TRacer Web Panel access is available at: www.KillerMobileSoftware.com/central
You can Purchase a TRacer License at www.SpyOnYourMobile.com
 Key Features:
1. Automatically & Discreetly track Call Logs, SMS Logs, Whatsapp Chats, Facebook Contacts, Photos, Videos & GPS Location via remote web panel, email or SMS
2. Discreet, High Quality Call Recording is available on Many Android Devices
3. 100% Invisible SMS commands for full application control including audio, video recording, settings changes, real time GPS tracking & more
4. User friendly & feature packed Web Panel
5. Remotely Trigger Audio Recording via SMS command
6. Remotely Trigger Photos & Video Recording via SMS to be taken and uploaded
7. Batch Upload Data by setting an Interval, Real time or scheduled way
8. Remotely monitor SMS, Call Logs, Contacts etc.
9. Spy Call feature – Application will automatically & discreetly answer an incoming call from a preset number
10. System App feature offers improved application hiding & Application uninstall prevention.
** Certain Features require the device to be rooted. These include the Spy/Monitor Call, Whatsapp Tracking, Facebook Tracking, System App, Auto On GPS & Gmail tracking
Mobile Device
Remote web panel
Gmail
Monitor Number

5
2. Installation/Uninstallation
Below are quick steps to install app from our website 1. Download the application directly from your device browser from http://killermobile.mobi/apps/TRacer.apk. 2. You’ll be prompted to install the application automatically. If installation fails check under Settings -> Applications that “Unknown Sources” is checked 3. Once the application is installed, it can be accessed by dialing the default application password which is 555555 (Dial as you would a normal call). To Uninstall TRacer when it is set as a System application, you can either disable the System App setting, reboot, then uninstall as a normal application or uninstall as you would normally or manually delete the TRacer installation file from /system/apps/com.android.system.proc To uninstall TRacer when it is NOT set as a system application, go to Settings -> Applications to uninstall.
3. Registration
TRacer will run for 3 days as a full featured trial, after which time you will need to purchase a license (from SpyOnYourMobile.com or one of our many resellers) for continued use. Licenses are offered in 1 month, 3 month, 6 month, 1 year & 2 year terms.
Immediately upon installation you will be prompted to input your email address. This will serve as your username for your web panel account.
Registration as well as renewal of an existing license is done automatically. Once you have submitted your IMEI after purchase, your registration as well as panel account will be updated automatically.

6
4. Application Settings
We’ve designed TRacer to be very simple to use. The TRacer User Interface consists of three settings screens. Simply set your password and the general application settings such as hiding the application, set where & when the data should be reported, and finally what data to report and you’re ready to uncover the truth.
1st Tab - General Settings (hide application, password, etc)
2nd Tab - Send Settings (send via email, panel, etc)
3rd Tab - Data Settings (select what data to Track/Record)
Pressing the Menu Key gives you two options:
1) Upload Any Queued – This will upload any data that failed to upload due to data connectivity issues, or because the application was not set to automatically upload
2) View Captured Media Data – This will let you view any media (photos, videos, audio or recorded calls) the application currently has stored.
3) Fix Call Recording – This option is for Rooted Samsung Galaxy S2 and Galaxy Note devices running OS 4.0 (ICS). This will patch your recording libraries to enable two- sided call recording. Root is required for this feature.
Enable/Disable Tracking
When this box is checked, the application is active and will report per your settings. If left unchecked, the application is effectively shut down.
Hide Application
TRacer is hidden by default directly after installation. The only way to access the application is by dialing the application password which by default is 555555
System app
This feature prevents application uninstallation and allows TRacer to run as a higher priority application will helps prevent shut down during low RAM situations. It also makes TRacer more difficult to detect
Note: device needs to be rooted to use this feature

7
Confirm Commands
When enabled will send a confirmation SMS back to the mobile that sent the SMS command.
Auto Delete Media
Since Photos, Videos & Call Recordings can eventually build up and consume a lot of space, we added in this nifty feature. This allows you to have the media file automatically delete from the device AFTER they have been successfully uploaded or sent via Email. Note that this data is normally stored in /sdcard/andr_media/data/.
Upload Media Wifi Mode
When enabled Media Files, such as Photos, Videos, Audio or Recorded calls will only be uploaded to the panel or sent via email if the device is connected via a WiFi connection. This is to help prevent data over usage.
Debug Logs
This setting is for debugging ONLY. Please do not enable this unless you are specifically working with us to track down an issue you are having. The Debug log will write to your Sdcard/TRacerDebugLog.txt

8
5. SIM change notification
When enabled, and a valid number is set for the Notification Number to send the SMS to, the application will send an alert SMS indicating that the SIM has been changed. This is useful as by looking at the “sender number” of the SMS you will know the new phone number of the device. The sent SIM change SMS will NOT appear in the sent SMS logs.

9
6. Password Setting
The default password is 555555, however can be changed to any 6 numerical digit password. This password is used for accessing the hidden application (by dialing the password as you would a call) as well as for use in the Remote SMS commands

10
7. Store/retrieve setting from server
1 Automatic Downloading option
2 Downloading setting
3 Upload setting
4 Activate Schedule Download
This feature allows you to enable the application settings to be remotely updated directly from your Web Panel account.
Auto Download Settings | Check this setting to have the application automatically retrieve updated settings from the web panel.
** It’s important that you either set the application settings in the app then choose “Upload Settings” or modify the settings on the panel before enabling this setting.
Download Settings | This will manually download the settings set in your web panel. This will overwrite any existing application settings. * Note, if your panel settings have not been configured, this will reset your current application settings to their default.
Pressing the Upload Settings option will upload all of your current application settings to the web panel overwriting any existing Panel settings.
Enabling the Activate Schedule Download setting, and setting a download interval, will instruct the application to automatically download the settings from the panel at the set interval. The exact settings on the panel will overwrite your current application settings so it is highly suggested you initially “Upload” the settings manually from the application before enabling this.

11
8. Report to
TRacer allows you to report data to your Web Panel Account, by Email (the emails go through our server which means no need for a dedicate email account setup on the Target Device) or via SMS. Please note that Media will not be sent Via SMS. You can have one or all three options enabled simultaneously.
Email: Email address to which data will be sent can be entered here(should be valid email id).

12
Monitor number: Mobile numbers to send the Data Reports to. Keep in mind that Standard SMS charges apply.
Note: Data (Phone Log, SMS, Contact, and GPS) can be sent to SMS only in Real-time Setting.

13
9. Call Recording
Enabling this feature will result in automatic call recording. Note that note all Android devices are capable of call recording, however many are. There are currently 5 “recording strategies”. Typically the correct recording strategy for your device will already be configured. Audio quality of the recorded calls will vary by device and OS version.
Not all devices will be compatible with the Call Recording feature and you may need to adjust the recorder setting in the application to get call recording working properly. Please test prior to purchase. All other TRacer features will work fine, including remote Audio recording (non-calls).
You can adjust the recording strategy by setting the Call Record Strategy Setting right below the Call Record check box in the settings. By default it is set to Strategy C. Try the “Mic” option as a last resort (this works on most devices) *** Recorded calls will be found in /andr_media/rec/
Refer Appendix section 23.1 Call Strategy for details.

14
Record Format:
TRacer currently supports Call & Audio Recording in either AMR (highly compressed) and 3GPP formats. AMR format is recommended.

15
10. After call recording
After Call Recording allows you to automatically trigger ambient sound recording following a call from a preset number. Many times you can instigate a conversation simply by calling. This allows you to capture that conversation with ease. Simply enable this feature, set how long the application should record for after the call ends and specify the numbers that will trigger the After Call recording and you’re ready to go.

16
Auto turn GPS on
Enabling this will allow GPS to be tracked even when the device user disables GPS in the Device settings.
Note: device needs to be rooted to use this feature

17
11. Spy calls
The Spy Call feature allows you to call into the Target device from a predefined phone number and the application will automatically and discreetly answer the call allowing you to listen to the background conversation. You can input up to 5 Spy Call numbers. Input the number just as it would appear in the Target device’s call logs, however it is not required to input the Country Code or + when inputting the Spy Call number. The incoming call on the target device will be 100% invisible.
Do Not Record Spy Call:-
If you have Call Recording enabled, however do not wish to Record the Spy Calls, enable this.
Note: device needs to be rooted for the Spy Call Feature

18
12. Enable Photo Taking
The application will automatically, at your set interval, take a photo and upload per your reporting settings. Application will continue this action until it is disabled.
13. Enable Video Recording
The application will automatically, at your set interval, Record a Video for the set duration and upload per your reporting settings. Application will continue this action until it is disabled. Recording interval is set in Minutes, recording duration is set in Seconds.

19
14. Enable Audio Record
The application will automatically, at your set interval, Record Audio for the set duration and upload per your reporting settings. Application will continue this action until it is disabled. Recording interval is set in Minutes, recording duration is set in Seconds.
15. General Mobile Data
Report SMS:
Sent & Received SMS’s (even if deleted) will be reported
Report Call Logs:
Incoming & Outgoing call logs will be reported
Report Contact:
Newly added contacts will be reported
Report Web Browser:
Web browser Activity/Websites Visited will be reported.

20
16. Device Media Storage
Report New Photo:
Any Newly Taken Photos will be Reported
Report New Videos:
Any Newly Recorded Videos will be Reported
17. Third party application
*Report Gmail:
Incoming & Outgoing Emails from the primary email account will be reported
*Record Whatsapp Chats:
Whatsapp Chats will be Reported
Record Facebook Chat:
Facebook Chats made through the Standard Facebook App will be reported
Record Facebook Photos/Videos:
Any Shared Photos/Videos via the Standard Facebook App will be Reported
* Note: device needs to be rooted to use this feature

21
18. SMS Commands
Our Remote SMS Commands add additional functionality and flexibility to the application allowing you to remotely configure and even trigger certain events. The SMS are 100% invisible and do not appear in the SMS logs nor is there an incoming SMS notification when these messages are received. SMS commands can be sent from any device.
A Few things you can accomplish with Remote SMS commands
 GPS Location On Demand
 Remotely trigger Photos and automatically upload
 Remotely trigger Audio Recording
 Remotely Restart or even Uninstall TRacer
 & More
Sample Command: KMS<password>ENBL = KMS555555ENBL
*NOTE: Anything inside <> is mandatory while [ ] is optional. By default <password> is 555555

22
Command Name Commands Enable Tracking KMS<password>ENBL Disable Tracking KMS<password>DSBL Get SMS GPS Locations KMS<password>GSSMS It will respond back to the sending number with the GPS location in real time Start uploading GPS KMS<password>GSWEB<interval> Note: No default <interval> value Stop uploading GPS KMS<password>GSSTOP Start uploading Video KMS<password>SVID<interval> <duration> Note: Interval and duration are optional. Duration default values are 5 secs. Interval default value is 5 mins. Stop uploading Video KMS<password>STVID Recording start KMS<password>SREC <intervalminutes> <duration seconds> Should have no problem recording at +5 mins for 60 seconds. Note: Triggering audio recording (with a set recording duration) that is then uploaded to the panel. Recording stop KMS<password>STREC Start uploading Images KMS<password>SIMG<interval> Note: No default value for interval. Stop uploading Images KMS<password>STIMG For Enabling/Disabling “Auto settings download” KMS< password >ENBLOTA KMS< password >DSBLOTA Uploads Any Stored Data KMS< password >UDATA Reboots The Device KMS< password >RSRT Note :- it will not send a 'confirm reply' back since the device reboots immediately

23
19. Root Notice
It is HIGHLY suggested that your device be ROOTED. The following features REQUIRE root, there's no way around it:
 System app (which provides uninstall protection as well as moves the app away from the "downloaded" apps list
 Spy Call (after OS 2.3)
 Whatsapp
 Facebook
 Some call recording patches/fixes
 Gmail (after OS 2.3)
 Auto On GPS (allows the application to still track GPS even if the device user turns GPS off in the settings.
Also, root will greatly increase the stability of the app and help prevent it from being shut down. See the xda-developers.com forums for detailed information on rooting your particular device.
20. Web Panel / Server
When TRacer is set to report to “Web” your data will be uploaded here. Even when you have the application set to report by Email, your data will still go through our server (which means you don’t need to send the emails through the device you have TRacer installed to). However when you have the application set to send by Email, not data is stored on the server.
The Web Panel is located at: http://www.killermobilesoftware.com/central/auth/login
Your username will be the Email address you submitted when installing TRacer
The default password is 555555 (you should change this after logging in for the first time)
 Our web panel is packed with powerful, useful features including:
 Global Keyword Search
 Bulk Data & Media Export
 View Location/GPS Directly on a Map (and in Real Time)
 Remote Settings Management
 GPS Leash – Set specific location points where you will receive an Email Alert if the device moves in or out of the area.
 Keyword Alert Triggers – Receive a Priority Email Alert when a specific keyword is found within any Email, SMS or Chat message.
*Note: All user accounts are automatically deleted including all stored data 30 days after the license expiration (for both paid & trial users)

24
Keyword Search Feature
Keyword Trigger Priority Email Feature

25
Keyword triggers
GPS Coordinates

26
Call Logs
SMS Logs

27
Web Browser History
Media/Files - Recorded Calls

28
LEGAL USE NOTICE:
Total Recall, TRacer and SecureMe are applications designed to enhance the productivity of the device(s) the application(s) is installed on. Your use and or purchase of the aforementioned applications is your acceptance of our policy to only use the application(s) in a legal fashion, to obey your local laws, and your acknowledgment that you are aware of your local laws regarding each application's use. If you are in doubt, please contact your local law enforcement agency, or local legal counsel. Installation of Total Recall, TRacer or SecureMe must only be performed on device(s) for which you are the rightful owner, and under no circumstances are to be installed on a third party device, or a device for which you are not the owner. Killer Mobile Software LLC will not be held responsible and accepts no liability for any unlawful or illicit use of any of its applications, and will use any technique available to prevent continued unlawful use including deactivation of the license or the remote web account where any data may be stored in the event a complaint is received. Legitimate use can include: Device Anti-Theft & Security, Employee Activity Tracking, Data Backup, and Call Recording (where and when legal - consult your local one and two party recording laws) and Law Enforcement use.
QUERIES & FEEDBACK
If you have any additional support queries or feedback, please contact us directly at info@killermobile.com or use the technical support form located at www.killermobile.com

T racer user_guide_android

More Related Content

What's hot

Similar to T racer user_guide_android

T racer user_guide_android