We configured IP addresses for PCs in two subnets and then configured two routers with IP addresses on their fast ethernet, serial, and fast ethernet interfaces. We then set up static routing between the routers to allow communication between the subnets.

1. SUB-RED EN PACKE TRACER
INICIAMOS PONIENDOLE IP A CADA UNO DE LAS PC
PC 0 PC1
PC2 PC 3
ESTOS SON LAS IP DE LAS SUBREDES

2. DE HAY CONFIGURAMOS LOS ROUTERS
PONIENDO ROUTER 1
ENABLE
CONFIGURE TERMINAL
INT F0/0
IP ADDRESS 204.15.5.1
NO SHUT
EXIT
INT F0/1
IP ADDRESS 204.15.5.65
NO SHUT
EXIT
INT S0/0/0
IP ADDRESS 204.15.5.97
NO SHUT
EXIT
ROUTER 2
ENABLE
CONFIGURE TERMINAL
INT F0/0
IP ADDRESS 204.15.5.32
NO SHUT
EXIT
INT F0/1
IP ADDRESS 204.15.5.80
NO SHUT
EXIT
Y LUEGO DE ESO ACEMOS EL ENRUTAMIENTO ESTATICO
PARA EL PRIMER ROUTER
IP ROUTE 204.15.5.0 255.255.255.252 204.15.5.98
PARA EL SEGUNDO ROUTER
IP ROUTE 204.15.5.0 255.255.255.252 204.15.5.97
Y FINALIZAMOS
GRACIAS