1. PRODUCT :
‘STC’ Brand Brake Lining is a flexible, solid woven asbestos based friction material reinforced
with Brass wire for better strength and impregnated with resine. Due to its flexible nature, it can
be cut into segments, cones and special shapes to enable the material in fitting to various forms.
It may be heated uniformly at a moderate temperature to soften the impregnates to make the
forming more easier. It should be used strictly under dry condition.
APPLICATION:
‘STC’ Brand Brake Lining is suitable for various break and clutch components and are used in
cranes, lifts, winches,mining, winding machines, haulages, road rollers, sugar mill centrifuges,
concrete mixers, excavators etc.
TECHNICAL DATA
Cross Breaking Strength - 2.52 X
10^5
Hardness: STC BRAKE LINER
Rockwell - 44-45
Shore - 75-78
Heat Swell - 0.34,
Water Swell - 0.26
Acetone Extract - 6.99
Specific Gravity - 1.4930
Loss of weight on ignition - 44.27
Co-efficient of Friction depends on
the severity of
application and maximum
operating temperature.
Operating Temperature:
Max. Temp. 260C Max. Continuous
temp. 125C
Ranges:
Length 15 m,
Thickness 4.8mm (3/16”) to 19.1
mm (3/4”)
Width 25.4mm (1”) to 635mm
(25”).