This document summarizes an analysis of seismicity and aeromagnetic data along a 100 km section of the San Andreas fault on the San Francisco Peninsula. The analysis reveals two distinct zones of deformation: 1) A southern zone characterized by thrust and reverse faulting indicating fault-normal compression. 2) A northern zone showing normal and strike-slip faulting, including a 1957 M5.3 earthquake. Between the zones is a 15 km wide zone of seismic quiescence. Aeromagnetic data help define the offshore geometry of the fault, showing an abrupt 3 km right step less than 5 km offshore in the northern zone. This change in fault geometry from compressional to extensional along strike may help explain variations in seismic
Inverse Theory in Geophysics, Lecture 1Amin khalil
Inverse theory deals with using surface measurements to determine subsurface structures. It defines a model that relates independent and dependent variables through parameters that are unknowns to be estimated from the data. For example, a model could define the relationship between gravity measurements on a beach and the depth and density of a buried treasure, with the goal of using the gravity data to estimate the treasure's location and composition. However, determining subsurface structures from surface measurements is an ill-posed problem that has non-unique solutions.
DEPREME HAZIRLAN TÜRKİYEM
DEPREME HAZIRLANAN ŞEHİRLERİMİZ VE İLÇELERİMİZLE TEMEL DEPREM BİLİNCİ EĞİTİMLERİ YAPMAK İSTİYORUZ. YEREL RİSKLERİN AZALTILMASI İÇİN EĞİTİM VE PROJELENDİRME HUSUSUNDA KATKI SAĞLAMAYA HAZIR AKADEMİSYENLER OLARAK YEREL YÖNETİMLERLE ORTAK EĞİTİM PROJELERİ GELİŞTİRME ARZUSUNDAYIZ
This document summarizes an analysis of seismicity and aeromagnetic data along a 100 km section of the San Andreas fault on the San Francisco Peninsula. The analysis reveals two distinct zones of deformation: 1) A southern zone characterized by thrust and reverse faulting indicating fault-normal compression. 2) A northern zone showing normal and strike-slip faulting, including a 1957 M5.3 earthquake. Between the zones is a 15 km wide zone of seismic quiescence. Aeromagnetic data help define the offshore geometry of the fault, showing an abrupt 3 km right step less than 5 km offshore in the northern zone. This change in fault geometry from compressional to extensional along strike may help explain variations in seismic
Inverse Theory in Geophysics, Lecture 1Amin khalil
Inverse theory deals with using surface measurements to determine subsurface structures. It defines a model that relates independent and dependent variables through parameters that are unknowns to be estimated from the data. For example, a model could define the relationship between gravity measurements on a beach and the depth and density of a buried treasure, with the goal of using the gravity data to estimate the treasure's location and composition. However, determining subsurface structures from surface measurements is an ill-posed problem that has non-unique solutions.
DEPREME HAZIRLAN TÜRKİYEM
DEPREME HAZIRLANAN ŞEHİRLERİMİZ VE İLÇELERİMİZLE TEMEL DEPREM BİLİNCİ EĞİTİMLERİ YAPMAK İSTİYORUZ. YEREL RİSKLERİN AZALTILMASI İÇİN EĞİTİM VE PROJELENDİRME HUSUSUNDA KATKI SAĞLAMAYA HAZIR AKADEMİSYENLER OLARAK YEREL YÖNETİMLERLE ORTAK EĞİTİM PROJELERİ GELİŞTİRME ARZUSUNDAYIZ
Gravimetri Dersi için aşağıda ki videoları izleyebilirsiniz.
Link 01: https://www.youtube.com/watch?v=HTyjVaVGx0k
Link 02: https://www.youtube.com/watch?v=fUkfgI8XaOE
The document discusses gravity anomalies and density variations in different regions based on gravity data. It shows how gravity maps reveal details about crustal thickness, tectonic features like faults and volcanic zones, and plate boundaries. Specific examples discussed include the Tibetan Plateau, Central America subduction zone, an area in Chugoku, Japan, and the state of Florida in the US. Regional gravity data can be used to model density changes associated with plate tectonics, crustal evolution, and volcanic and tectonic activity.
The USF team reviewed a geophysical investigation of the Kar Kar region conducted by WesternGeco in 2011. They found that WesternGeco's magnetotelluric (MT) data and models were of high quality. Both the WesternGeco and USF MT models identified a low resistivity zone at 300m depth that correlates with a water-bearing zone found in Borehole 4. USF performed gravity modeling which identified a north-south trending basin reaching 1500m depth, consistent with mapped faults. A preliminary hydrothermal model suggested observed temperatures could result from deep circulation of meteoric waters in the basin without needing a localized heat source. Additional geophysical data is recommended around the Jermaghbyur hot springs to
This document summarizes a study that used gravity data to delineate underground structure in the Beppu geothermal field in Japan. Analysis of Bouguer anomaly maps revealed high anomalies in the southern and northern parts of the study area that correspond to known geological formations. Edge detection filtering of the gravity data helped identify subsurface faults, including the northern edge of the high southern anomaly corresponding to the Asamigawa Fault. Depth modeling of the gravity basement showed differences between the southern and northern hot spring areas, with steep basement slopes along faults in the south and uplifted basement in the north.
This document summarizes the development of a new ultra-high resolution model of Earth's gravity field called GGMplus. Key points:
- GGMplus combines satellite gravity data from GOCE and GRACE with terrestrial gravity data and topography to achieve unprecedented 200m spatial resolution globally.
- It provides gridded estimates of gravity, horizontal and radial field components, and quasi-geoid heights at over 3 billion points covering 80% of the Earth's land.
- GGMplus reveals new details of small-scale gravity variations and identifies locations of minimum and maximum gravity, suggesting peak-to-peak variations are 40% larger than previous estimates. The model will benefit scientific and engineering applications.
Gravity measurements were taken in a region of China covering the south-north earthquake belt in 1998, 2000, 2002, and 2005. Researchers noticed significant gravity changes in the region surrounding Wenchuan and suggested in 2006 that a major earthquake could occur there in 2007 or 2008. While gravity changes were significant at some locations, more research is needed to determine if they could be considered a precursor. Uncertainties exist from measurement errors, hydrologic effects, and crustal movements. Improved data collection and analysis could enhance using gravity monitoring for earthquake research.
The document provides guidelines for implementing the H/V spectral ratio technique using ambient vibration measurements to evaluate site effects. It recommends procedures for experimental design, data processing, and interpretation. The key recommendations include measuring for sufficient duration depending on expected frequency, using multiple measurement points, avoiding disturbances, and interpreting H/V peaks in context with geological and geophysical data. Reliable H/V peaks are defined as having a clear maximum within expected frequency ranges and uncertainties. The guidelines aim to help apply the technique while accounting for its limitations.
Geopsy yaygın olarak kullanılan profesyonel bir program. Özellikle, profesyonel program deneyimi yeni mezunlarda çok aranan bir özellik. Bir öğrencim çalışmasında kullanmayı planlıyor.
Gravimetri Dersi için aşağıda ki videoları izleyebilirsiniz.
Link 01: https://www.youtube.com/watch?v=HTyjVaVGx0k
Link 02: https://www.youtube.com/watch?v=fUkfgI8XaOE
The document discusses gravity anomalies and density variations in different regions based on gravity data. It shows how gravity maps reveal details about crustal thickness, tectonic features like faults and volcanic zones, and plate boundaries. Specific examples discussed include the Tibetan Plateau, Central America subduction zone, an area in Chugoku, Japan, and the state of Florida in the US. Regional gravity data can be used to model density changes associated with plate tectonics, crustal evolution, and volcanic and tectonic activity.
The USF team reviewed a geophysical investigation of the Kar Kar region conducted by WesternGeco in 2011. They found that WesternGeco's magnetotelluric (MT) data and models were of high quality. Both the WesternGeco and USF MT models identified a low resistivity zone at 300m depth that correlates with a water-bearing zone found in Borehole 4. USF performed gravity modeling which identified a north-south trending basin reaching 1500m depth, consistent with mapped faults. A preliminary hydrothermal model suggested observed temperatures could result from deep circulation of meteoric waters in the basin without needing a localized heat source. Additional geophysical data is recommended around the Jermaghbyur hot springs to
This document summarizes a study that used gravity data to delineate underground structure in the Beppu geothermal field in Japan. Analysis of Bouguer anomaly maps revealed high anomalies in the southern and northern parts of the study area that correspond to known geological formations. Edge detection filtering of the gravity data helped identify subsurface faults, including the northern edge of the high southern anomaly corresponding to the Asamigawa Fault. Depth modeling of the gravity basement showed differences between the southern and northern hot spring areas, with steep basement slopes along faults in the south and uplifted basement in the north.
This document summarizes the development of a new ultra-high resolution model of Earth's gravity field called GGMplus. Key points:
- GGMplus combines satellite gravity data from GOCE and GRACE with terrestrial gravity data and topography to achieve unprecedented 200m spatial resolution globally.
- It provides gridded estimates of gravity, horizontal and radial field components, and quasi-geoid heights at over 3 billion points covering 80% of the Earth's land.
- GGMplus reveals new details of small-scale gravity variations and identifies locations of minimum and maximum gravity, suggesting peak-to-peak variations are 40% larger than previous estimates. The model will benefit scientific and engineering applications.
Gravity measurements were taken in a region of China covering the south-north earthquake belt in 1998, 2000, 2002, and 2005. Researchers noticed significant gravity changes in the region surrounding Wenchuan and suggested in 2006 that a major earthquake could occur there in 2007 or 2008. While gravity changes were significant at some locations, more research is needed to determine if they could be considered a precursor. Uncertainties exist from measurement errors, hydrologic effects, and crustal movements. Improved data collection and analysis could enhance using gravity monitoring for earthquake research.
The document provides guidelines for implementing the H/V spectral ratio technique using ambient vibration measurements to evaluate site effects. It recommends procedures for experimental design, data processing, and interpretation. The key recommendations include measuring for sufficient duration depending on expected frequency, using multiple measurement points, avoiding disturbances, and interpreting H/V peaks in context with geological and geophysical data. Reliable H/V peaks are defined as having a clear maximum within expected frequency ranges and uncertainties. The guidelines aim to help apply the technique while accounting for its limitations.
Geopsy yaygın olarak kullanılan profesyonel bir program. Özellikle, profesyonel program deneyimi yeni mezunlarda çok aranan bir özellik. Bir öğrencim çalışmasında kullanmayı planlıyor.
1. SON DEPREMLER ÜZERİNE DEĞERLENDİRMESON DEPREMLER ÜZERİNE DEĞERLENDİRME
TÜRKİYE VE YUNANİSTAN’DA DEPREMLERTÜRKİYE VE YUNANİSTAN’DA DEPREMLER
SON DEPREMLER ÜZERİNE DEĞERLENDİRMESON DEPREMLER ÜZERİNE DEĞERLENDİRME
TÜRKİYE VE YUNANİSTAN’DA DEPREMLERTÜRKİYE VE YUNANİSTAN’DA DEPREMLER
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Prof. Dr. Ali Osman ÖNCEL
18 Kasım 2015 9.30-10.00
İÜ Mühendislik Fakültesi D312
2. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
3. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
4. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
5. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
6. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
7. M6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
8. M4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİM4.4 KASIM İSTANBUL DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
9. M6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
10. M6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
11. M6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİM6.5 17 KASIM YUNANİSTAN DEPREMİ
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Yapılan analizlerde enjeksiyon oranı kuyu işlem parametreleri arasında tetiklenen sismik aktivite olasılığını arttıran en önemli parametredir. Yüksek enjeksiyon oranı olan SWD kuyularının yakınlarında iki kat daha fazla deprem oluşmaktadır. Enjeksiyon oranının yüksek olması çevresel rezervuar basıncını büyük oranda etkiler, bu da olasılığın artmasına faydaki gerilmenin değişmesine neden olur. Yüksek miktarda enjeksiyon yapılan kuyularda rezervuarın büyüklüğü ve uzanımı, fayın basınç dağılımı değişmektedir. Bu yapılan çalışmada diğer parametrelerin deprem ile ilişkisinin gücü saptanmamıştır. Enjeksiyon oranı ve toplam
enjeksiyon hacmi gibi işlem parametreleri arasındaki farkın yeni üretim teknikleri geliştirdiği görülmüştür. Petrol ve gaz endüstrisi bu işlem parametrelerini kullanarak enjeksiyon kuyuları nedeni ile oluşan deprem sayılarını azaltabilirler.
Editor's Notes
Time
1900 – 2015 M6 VE M 4.5
2015-11-16 15:45:44 (UTC)
2015-11-16 17:45:44 (UTC+02:00) in your timezone
Times in other timezones
Nearby Cities
15km (9mi) SSE of Yakuplu, Turkey
16km (10mi) SE of Beylikduezue, Turkey
17km (11mi) SSW of Bahcelievler, Turkey
18km (11mi) SE of Gurpinar, Turkey
363km (226mi) WNW of Ankara, Turkey
16 Kasım 2015 tarihinde Marmara Denizi’nde yerel saat ile 17:45’de aletsel buyukluğu
Ml=4.2 olan hafif şiddette bir deprem meydana gelmiştir. Depremin odak derinliği
yaklaşık 8 km civarında olup sığ odaklı bir depremdir. Deprem İstanbul ili ve
ilcelerinde hissedilmiştir.
Deprem sonrasında otomatik olarak hazırlanan tahmini şiddet haritası depremin
merkezinde şiddet değerinin Io= IV, İstanbul’da Io= III olduğunu gostermektedir.
Depremin meydana geldiği yer Kuzey Anadolu Fay Zonu’nun Marmara Denizinden
gecen kuzey kolu icerisinde yer almaktadır. Bilindiği gibi Kuzey Anadolu Fay Zonu’ nun
kuzey kolu İzmit Korfezi-Adalar acıklarından Marmara Denizinden gecerek MurefteŞarkoy’e
bağlanmakta ve oradan Saroz Korfezine uzanmaktadır. Aletsel donemde
bolgede meydana gelmiş en etkili deprem 1999 yılı Kocaeli (M=7.4) depremidir.
Bolgede birkac yılda bir bu tur hafif ve orta şiddette depremler meydana gelmektedir.
Kuzey Anadolu Fay Zonunun Batı Marmara’dan gecen uzantısı Marmara Denizi
icerisinde en yoğun deprem aktivitesinin gozlendiği yerdir. Marmara Denizi ve cevresi
I. Derece Deprem Bolgesi icerisinde yer almaktadır. Dolayısı ile bolgede yaşayan
vatandaşlarımızın depreme karşı herzaman hazırlıklı ve bilincli olması, depreme
dayanıklı binalarda oturmaları veya satın alacakları konutların depreme dayanıklı
olarak inşa edilmiş olması olası afetlere karşı alınacak en guvenli tedbir olacaktır.
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
The November 17, 2015 M 6.5 earthquake northwest of Nidri, Greece, occurred as the result of strike slip faulting on or near the regional plate boundary between the Nubia (Africa) and Eurasia plates. At the location of this earthquake, Nubia converges with Eurasia at a rate of 9mm/yr towards the north-northwest. Nubian lithosphere subducts beneath the Aegean Sea along the Hellenic Arc, to the south of Crete and southeast of the November 17 earthquake. Farther west, plate motion becomes more oblique as the plate boundary rotates clockwise, until the boundary is dominantly transform in the region of this earthquake. Preliminary focal mechanisms for the earthquake indicate it occurred as the result of either northwest striking, left-lateral faulting or northeast striking, right-lateral slip; left-lateral faulting would be consistent with the orientation of the local plate boundary. Right-lateral faulting would also be consistent with other regional, non-plate boundary faults in the region; further studies of this event will be required to determine the causative faulting structure. The region surrounding Greece is frequently impacted by moderate-to-large earthquakes like the November 17, 2015 event, and 14 other earthquakes of M6.5 or larger have occurred within 250 km of the November 17 event over the last century. The largest was a M 7.0 in January 1983, 85 km to the south, which did not cause any known fatalities. A M 6.3 event in August 2003, just 20 km to the north-northwest, also did not result in any known fatalities, though a M 6.5 earthquake in June 1995, 160 km to the east of the November 17, 2015 event, resulted in over 20 fatalities and 60 injuries.
Earthquake Report
Seismotectonics of the Mediterranean Region and Vicinity
The Mediterranean region is seismically active due to the northward convergence (4-10 mm/yr) of the African plate with respect to the Eurasian plate along a complex plate boundary. This convergence began approximately 50 Ma and was associated with the closure of the Tethys Sea. The modern day remnant of the Tethys Sea is the Mediterranean Sea. The highest rates of seismicity in the Mediterranean region are found along the Hellenic subduction zone of southern Greece, along the North Anatolian Fault Zone of western Turkey and the Calabrian subduction zone of southern Italy. Local high rates of convergence at the Hellenic subduction zone (35mm/yr) are associated with back-arc spreading throughout Greece and western Turkey above the subducting Mediterranean oceanic crust. Crustal normal faulting throughout this region is a manifestation of extensional tectonics associated with the back-arc spreading. The region of the Marmara Sea is a transition zone between this extensional regime, to the west, and the strike-slip regime of the North Anatolian Fault Zone, to the east. The North Anatolian Fault accommodates much of the right-lateral horizontal motion (23-24 mm/yr) between the Anatolian micro-plate and Eurasian plate as the Anatolian micro-plate is being pushed westward to further accommodate closure of the Mediterranean basin caused by the collision of the African and Arabian plates in southeastern Turkey. Subduction of the Mediterranean Sea floor beneath the Tyrrhenian Sea at the Calabrian subduction zone causes a significant zone of seismicity around Sicily and southern Italy. Active volcanoes are located above intermediate depth earthquakes in the Cyclades of the Aegean Sea and in southern Italy.
In the Mediterranean region there is a written record, several centuries long, documenting pre-instrumental seismicity (pre-20th century). Earthquakes have historically caused widespread damage across central and southern Greece, Cyprus, Sicily, Crete, the Nile Delta, Northern Libya, the Atlas Mountains of North Africa and the Iberian Peninsula. The 1903 M8.2 Kythera earthquake and the 1926 M7.8 Rhodes earthquakes are the largest instrumentally recorded Mediterranean earthquakes, both of which are associated with subduction zone tectonics. Between 1939 and 1999 a series of devastating M7+ strike-slip earthquakes propagated westward along the North Anatolian Fault Zone, beginning with the 1939 M7.8 Erzincan earthquake on the eastern end of the North Anatolian Fault system. The 1999 M7.6 Izmit earthquake, located on the westward end of the fault, struck one of Turkey's most densely populated and industrialized urban areas killing, more than 17,000 people. Although seismicity rates are comparatively low along the northern margin of the African continent, large destructive earthquakes have been recorded and reported from Morocco in the western Mediterranean, to the Dead Sea in the eastern Mediterranean. The 1980 M7.3 El Asnam earthquake was one of Africa's largest and most destructive earthquakes within the 20th century.
Large earthquakes throughout the Mediterranean region have also been known to produce significant and damaging tsunamis. One of the more prominent historical earthquakes within the region is the Lisbon earthquake of November 1, 1755, whose magnitude has been estimated from non-instrumental data to be about 8.0. The 1755 Lisbon earthquake is thought to have occurred within or near the Azores-Gibraltar transform fault, which defines the boundary between the African and Eurasian plates off the west coast of Morocco and Portugal. The earthquake is notable for both a large death toll of approximately 60,000 people and for generating a tsunami that swept up the Portuguese coast inundating coastal villages and Lisbon. An earthquake of approximately M8.0 near Sicily in 1693 generated a large tsunami wave that destroyed numerous towns along Sicily's east coast. The M7.2 December 28, 1908 Messina earthquake is the deadliest documented European earthquake. The combination of severe ground shaking and a local tsunami caused an estimated 60,000 to 120,000 fatalities.