This document provides product details and specifications for a solar-powered LED light made by Shenzhen Century sunshine Lighting Limited. The light has multiple working modes, is easy to install with a horizontal sleeve, and has a modular LED light source and motion sensor. It uses high-efficiency solar panels and LEDs for energy savings, and has an intelligent turn-on mode. Installation involves fixing the horizontal sleeve and lamp body to a light pole and adjusting the solar panel angle.

1. Shenzhen Century sunshine Lighting Limited
ｗｗｗ．ｃｅｎｔｕｒｙｓｕｎｓｈｉｎｅ．ｃｏｍ
Semi-separated
series specification

2. Shenzhen Century sunshine Lighting Limited
Solar panel
Horizontal sleeve
Light pole
Motion
sensor
Switch
LED light
Product Details

3. Product Feature
There are multi-working
modes in one lamp, you
can change its working
mode as you need..
easy to install with
horizontal sleeves,
suitable for all kinds
of light poles
Surface is treated
with special paint.
One-time molded
aluminum has better
heat dissipation
performance and
better endurance
effect
Modular 3030 light
source, super high
brightness
Intelligent sensor
Larger size solar
panels
Shenzhen Century sunshine Lighting Limited

4. Shenzhen Century sunshine Lighting Limited

5. Sensing range
Sensing effect
Shenzhen Century sunshine Lighting Limited

6. imported USA Bridgelux LED,
super high light efficiency,
long-lasting lighting
LED energy-saving light
source:
high-efficiency solar panel, high
conversion rate, special surface
treatment
Solar panel:
It adopts a circular venting hole,
and the appearance looks full of
industrial sense, and the unique
radioactive distribution makes the
product more excellent;
Circular venting hole:
Materials Introduction:
Product Advantages
Easy to install and
maintain
Multiple control
modes for easy
operation
Long life span of
LED chip
Customized battery
box, waterproof and
high temperature
resistant;
Solar panel, high
conversion rate
Intelligent turn-on
lighting mode
Shenzhen Century sunshine Lighting Limited

7. Product Size:
Shenzhen Century sunshine Lighting Limited

8. Installation Procedure:
1.Choose the best position for lighting.
2.Open the package and check if the accessories are
complete.
3.Use the ejector pin to open the switch before installation
Switch
4.Firstly, fix the horizontal sleeve to the lamp body with a nut, and then
install the lamp body on the pick arm. At this time, one person needs
to support the lamp post, the other person supports the lamp body,
and one person needs to use the hoop to fix the lamp body on the
lamp post. Finally adjust the solar panel to a good angle, and fix it on
the lamp post with a nut.(As figure 1)
When the LED light source is working, the red indicator light is fully illuminated.
When the LED light source is not working, the red indicator light is off.
Matters needing attention:
As figure 1
Shenzhen Century sunshine Lighting Limited

9. Warm prompt:
During installation, one or two people shall hold the lamp body, and another person
shall tighten the nut, so as to avoid misplacement of the nut due to force during the
tightening process, or would result in nut sticking and subsequent undisassembly;
It is recommended to install on a sunny day, because it can't be charged quickly
after installation in rainy days, and it will be discharged at night, which will affect the
using effect.
If the lamp does not work after the package is opened, it is usually because the
battery power is insufficient. Charge it for 2 days before installation.
Shenzhen Century sunshine Lighting Limited

10. Spectra:
Road lighting simulation
Shenzhen Century sunshine Lighting Limited

11. Shenzhen Century sunshine Lighting Limited
Shenzhen Century sunshine Lighting Limited

12. Road Mountains Rural Street Square Park School
Case shows:
Shenzhen Century sunshine Lighting Limited

13. Certificate:
CE IP66 RoHS
6-7F, 1#, B Area, Xifa Industrial Park, Yintian Industrial
Zone, Xixiang, Bao’an, Shenzhen, Guangdong Province
+86-0755-29360050
andy@centurysunshine.com
Coatact us:
Shenzhen Century sunshine Lighting Limited