SOLAREYE range of solar powered LED lighting systems eliminates the need for earthworks excavation and installation of costly underground or suspended armored electrical cables.
SOLAREYE range of solar powered LED lighting systems include :-
- outdoor building wall lights
- suspended glass roof lights
- outdoor underground decorative lights
- stud lights
- speed bump lights
- guardrail lights
- traffic symbol lights
- car park entrance/exit guide lights
- traffic signal lights
- flash lights
- street lights
- courtyard lights
CEILING QUEEN is a range of award-winning ceiling boards made from minerals instead of gypsum or plaster. It looks similar to plaster ceiling boards and is paintable. It is non-toxic and will permanently generate negative ions to clean and purify the surrounding indoor air environment.
Translucent LED illuminated furniture that is powered by a rechargeable battery. Controlled via remote, it features wireless operation, water and impact resistant body, easy maintenance and versatile applications.
A patented outdoor energy efficient LED lighting system from Turkey that will enhance any outdoor architectural decoration. It is easily installed on the ground or on walls, even underwater. High brightness LED lighting and ultra-durable casing makes it highly visible yet able to withstand heavy duty usage. It can be installed on roads, curbs, walls and water features.
MEDILAMP is an air purifying PLC lighting system that uses 2 air purifying technology, ionizer and photo catalytic oxidation, to purify and disinfect the surrounding indoor air environment. It will also reduce odor thus making the air fresher-smelling and healthier.
http://inarocket.com
Learn BEM fundamentals as fast as possible. What is BEM (Block, element, modifier), BEM syntax, how it works with a real example, etc.
Content personalisation is becoming more prevalent. A site, it's content and/or it's products, change dynamically according to the specific needs of the user. SEO needs to ensure we do not fall behind of this trend.
Lightning Talk #9: How UX and Data Storytelling Can Shape Policy by Mika Aldabaux singapore
How can we take UX and Data Storytelling out of the tech context and use them to change the way government behaves?
Showcasing the truth is the highest goal of data storytelling. Because the design of a chart can affect the interpretation of data in a major way, one must wield visual tools with care and deliberation. Using quantitative facts to evoke an emotional response is best achieved with the combination of UX and data storytelling.
CEILING QUEEN is a range of award-winning ceiling boards made from minerals instead of gypsum or plaster. It looks similar to plaster ceiling boards and is paintable. It is non-toxic and will permanently generate negative ions to clean and purify the surrounding indoor air environment.
Translucent LED illuminated furniture that is powered by a rechargeable battery. Controlled via remote, it features wireless operation, water and impact resistant body, easy maintenance and versatile applications.
A patented outdoor energy efficient LED lighting system from Turkey that will enhance any outdoor architectural decoration. It is easily installed on the ground or on walls, even underwater. High brightness LED lighting and ultra-durable casing makes it highly visible yet able to withstand heavy duty usage. It can be installed on roads, curbs, walls and water features.
MEDILAMP is an air purifying PLC lighting system that uses 2 air purifying technology, ionizer and photo catalytic oxidation, to purify and disinfect the surrounding indoor air environment. It will also reduce odor thus making the air fresher-smelling and healthier.
http://inarocket.com
Learn BEM fundamentals as fast as possible. What is BEM (Block, element, modifier), BEM syntax, how it works with a real example, etc.
Content personalisation is becoming more prevalent. A site, it's content and/or it's products, change dynamically according to the specific needs of the user. SEO needs to ensure we do not fall behind of this trend.
Lightning Talk #9: How UX and Data Storytelling Can Shape Policy by Mika Aldabaux singapore
How can we take UX and Data Storytelling out of the tech context and use them to change the way government behaves?
Showcasing the truth is the highest goal of data storytelling. Because the design of a chart can affect the interpretation of data in a major way, one must wield visual tools with care and deliberation. Using quantitative facts to evoke an emotional response is best achieved with the combination of UX and data storytelling.
Heliport LED Three Color Locating Beacon / Single Identification Beacon/Single Identification Beacon(Morse code "H")
Airfield Lighting Systems LED Heliport beacon light is for the identification of heliports in difficult surroundings or to provide long-range guidance to the heliport and assist landing.
Compliant to ICAO Annex 14 Volume II for Heliports. The IP66 heliport beacon emit repeated series of equal spaced short duration white flashes (letter H in Morse code).
The Intensity level can be set at 100%, 30% or 5% from the ALS controller.
Contact Info:
HUNAN CHENDONG TECH CO., LTD
Tel: +0086-0731-85563265
Fax: +0086-0731-85563365
Skype: sophia.guo88
Phone/WhatsApp: +0086-13929493960
Email: sophia@chendongtech.com
Website: http://www.cdt-en.com/
CM-HT12-CU Helipad lighting system 110-240 Vac steady omnidirectional green light TLOF FATO helipad elevated perimeter lighting
A signalization TLOF system (Touchdown and Lift-Off area) must be present in every heliport with nigh operation. The system is composed by lights with green omnidirectional emission, located on the perimeter of heliport.
TLOF area can be circular (with a minimum of 14 lights) or square (with minimum of 4 lights for side and installed with a maximum distance of 3 meters one from the other).
HUNAN CHENDONG TECH CO., LTD
Tel: +0086-0731-85563265 Fax: +0086-0731-85563365
Phone/WhatsApp: +0086-13929493960 Skype: sophia.guo88
Email: sophia@chendongtech.com Website: http://www.cdt-en.com/
The smallest light in the 10W series, the 110C uses 1 x 10W LED chip capable of achieving super high lumen output using USA made CREE LEDs that last over 50,000 hours.
CM-HT12-D LED 8'' Flush Heliport FATO (Final Approach and Take Off Area) & Aiming Point Light, Heliport Lighting Systems | Helipad Lighting Suppliers Website:http://www.cdt-en.com/ Email:sophia@chendongtech.com Phone/WhatsApp:+86-13929493960
According to ICAO Annex 14 and FAA Advisory Circular 150/5390-2C, heliports no matter located on the top of building or on the ground, shall be equipped with helipad (helideck) lightings and marks. CDT can offer you with all kinds of helipad (helideck) lightings range from beacon light, approaching light, perimeter light, landing aimpoint light, floodlight to windsock.
CM-HT12-CQY Inset Yellow TLOF Heliport Light Yellow LED Steady Touchdown and lift-off area Perimeter Light for Surface-Level Heliport
This is an omnidirectional Fully Flush LED inset light fixture that is used to guide aircraft on to the parking stand. The light is available in two versions: yellow or red. The yellow version indicates the route of the aircraft to the pilot onto the stand area, while the single red version is placed at the end of the route. And it's used on heliports with constant voltage sources as boundary marking of final approach and takeoff (FATO) areas, touchdown and lift-off (TLOF) areas, and aprons. It can also be used for taxiway edges and aiming points. Yellow heliport lights are usually used for military and existing civilian applications, while green is for new civilian applications.
Heliport LED Three Color Locating Beacon / Single Identification Beacon/Single Identification Beacon(Morse code "H")
Airfield Lighting Systems LED Heliport beacon light is for the identification of heliports in difficult surroundings or to provide long-range guidance to the heliport and assist landing.
Compliant to ICAO Annex 14 Volume II for Heliports. The IP66 heliport beacon emit repeated series of equal spaced short duration white flashes (letter H in Morse code).
The Intensity level can be set at 100%, 30% or 5% from the ALS controller.
Contact Info:
HUNAN CHENDONG TECH CO., LTD
Tel: +0086-0731-85563265
Fax: +0086-0731-85563365
Skype: sophia.guo88
Phone/WhatsApp: +0086-13929493960
Email: sophia@chendongtech.com
Website: http://www.cdt-en.com/
CM-HT12-CU Helipad lighting system 110-240 Vac steady omnidirectional green light TLOF FATO helipad elevated perimeter lighting
A signalization TLOF system (Touchdown and Lift-Off area) must be present in every heliport with nigh operation. The system is composed by lights with green omnidirectional emission, located on the perimeter of heliport.
TLOF area can be circular (with a minimum of 14 lights) or square (with minimum of 4 lights for side and installed with a maximum distance of 3 meters one from the other).
HUNAN CHENDONG TECH CO., LTD
Tel: +0086-0731-85563265 Fax: +0086-0731-85563365
Phone/WhatsApp: +0086-13929493960 Skype: sophia.guo88
Email: sophia@chendongtech.com Website: http://www.cdt-en.com/
The smallest light in the 10W series, the 110C uses 1 x 10W LED chip capable of achieving super high lumen output using USA made CREE LEDs that last over 50,000 hours.
CM-HT12-D LED 8'' Flush Heliport FATO (Final Approach and Take Off Area) & Aiming Point Light, Heliport Lighting Systems | Helipad Lighting Suppliers Website:http://www.cdt-en.com/ Email:sophia@chendongtech.com Phone/WhatsApp:+86-13929493960
According to ICAO Annex 14 and FAA Advisory Circular 150/5390-2C, heliports no matter located on the top of building or on the ground, shall be equipped with helipad (helideck) lightings and marks. CDT can offer you with all kinds of helipad (helideck) lightings range from beacon light, approaching light, perimeter light, landing aimpoint light, floodlight to windsock.
CM-HT12-CQY Inset Yellow TLOF Heliport Light Yellow LED Steady Touchdown and lift-off area Perimeter Light for Surface-Level Heliport
This is an omnidirectional Fully Flush LED inset light fixture that is used to guide aircraft on to the parking stand. The light is available in two versions: yellow or red. The yellow version indicates the route of the aircraft to the pilot onto the stand area, while the single red version is placed at the end of the route. And it's used on heliports with constant voltage sources as boundary marking of final approach and takeoff (FATO) areas, touchdown and lift-off (TLOF) areas, and aprons. It can also be used for taxiway edges and aiming points. Yellow heliport lights are usually used for military and existing civilian applications, while green is for new civilian applications.
1. PRESENTS
LUMENS LAB SDN BHD
(971551-H)
P-03-05, Impian Meridian, Commerz Office,
Jalan Subang 1, USJ 1,
47600 Subang Jaya, Selangor, Malaysia.
Email : enquiries@lumenslab.com
October 2012 R2 Edition www.lumenslab.com 1/13
2. LUMENS LAB SDN BHD LUMENS LAB SDN BHD
SOLAREYE series of solar powered outdoor decorative and warning
lights bring together safety, design and durability in an energy efficient
package.
SOLAREYE decorative and warning lights are powered by an array of built-
in solar panels connected to a rechargeable battery pack. The energy of
the sun is stored in the rechargeable battery pack which is then used to
light up an array of energy efficient LED bulbs.
LUMENS LAB
SDN BHD
LUMENS LAB
LUMENS LAB SDN BHD
SDN BHD
SOLAREYE decorative and warning lights are powered by an array of built-
in solar panels connected to a rechargeable battery pack. The energy of
the sun is stored in the rechargeable battery pack which is then used to
light up an array of energy efficient LED bulbs.
October 2012 R2 Edition www.lumenslab.com 2/13
3. LUMENS LAB SDN BHD
Traffic safety lighting refers to lighting systems to reduce the risk of
traffic related accidents by road users that include pedestrians as well
as motorists.
Traditional traffic safety lighting systems requires a lot of resources for
installation, be it labour or materials. For e.g., excavation and relaying of
earthworks, laying of costly underground or installation of suspended
armored electrical cables, installation of the required lighting systems
etc.
Operations and maintenance is equally costly due to energy wasteful
lighting systems, bulb replacements, damaged cables etc.
October 2012 R2 Edition www.lumenslab.com 3/13
4. SOLAREYE eliminates the need for earthworks excavation and installation
of costly underground or suspended armored electrical cables.
SOLAREYE vastly reduces installation, operational and maintenance costs.
SOLAREYE range of solar powered LED lighting systems not only covers
traffic safety but also outdoor decoration as well.
LUMENS LAB SDN BHD LUMENS LAB SDN BHD
SOLAREYE range of solar powered LED lighting systems not only covers
traffic safety but also outdoor decoration as well.
SOLAREYE range of solar powered LED lighting systems include
- stud lights
- speed bump lights
- guardrail lights
- traffic symbol lights
- car park entrance/exit guide lights
- traffic signal lights
- outdoor building wall lights
- suspended glass roof lights
- outdoor underground decorative lights
- flash lights
- street lights
- courtyard lights
October 2012 R2 Edition www.lumenslab.com 4/13
5. Due to our specialized knowledge and constant research into solar power
generation systems, SOLAREYE is also involved in the development of
Solar Powered Energy Generation Modules that will help you reduce the
consumption of on-grid electricity (solar power as a supplementary energy
resource) or in some cases, totally eliminate the need for on-grid power.
This means your power supply is totally off-grid, relying solely on solar
power.
October 2012 R2 Edition www.lumenslab.com 5/13
6. Common Specifications Applies To All Models
Solar Cell Polycrystalline / Monocrystalline Silicon
Light Source Super Luminosity LED
Operational Temperature -25°C ~ 75°C
Waterproof Standard IP 67 and Above
Design Life Span >5 Years (Ni-Mh) & >15 Years (Super Capacitor)
Viewable Distance More Than 800 Metres
Model QH - 01D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 30 Tons
Overall Dimension (MM) 140 x 130 x 28
Model QH - 02D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 30 Tons
Overall Dimension (MM) 140 x 130 x 28
October 2012 R2 Edition www.lumenslab.com 6/13
7. Model QH - 03D
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 102 x 102 x 21.3
Model QH - 04D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 111 x 121 x 73
Model QH - 05D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 89 x 116 x 22
October 2012 R2 Edition www.lumenslab.com 7/13
8. Model QH - 06D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 30 Tons
Overall Dimension (MM) 88 x 108 x 23
Model QH - 07D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 30 Tons
Overall Dimension (MM) 110 x 120 x 20
Model QH - 10D
LUMENS LAB SDN BHD
Luminous Mode Varying / Constant Type
Operational Time More Than 108 Hours on Varying Mode ;
More Than 24 Hours on Constant Mode
Surface Casement Material Aluminium Alloy and Polycarbonate
Compression Resistance 30 Tons
Overall Dimension (MM) 122 x 132 x 74
October 2012 R2 Edition www.lumenslab.com 8/13
9. Model QH - 01A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 145 x 145 x 41
Model QH - 03A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Polycarbonate and Stainless Steel
Compression Resistance 20 Tons
Overall Dimension (MM) 202 x 202 x 52
Model QH - 05A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Polycarbonate and Stainless Steel
Compression Resistance 20 Tons
Overall Dimension (MM) 200 x 100 x 50
October 2012 R2 Edition www.lumenslab.com 9/13
10. Model QH - 07A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 91 x 91 x 50
Model QH - 09A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Glass & Stainless Steel
Compression Resistance 30 Tons
Overall Dimension (MM) 250 Ø x 56
Model QH - 10A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Glass & Stainless Steel
Compression Resistance 30 Tons
Overall Dimension (MM) 129 Ø x 68
October 2012 R2 Edition www.lumenslab.com 10/13
11. Model QH - 12A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Glass & Stainless Steel
Compression Resistance 30 Tons
Overall Dimension (MM) 120 Ø x 38
Model QH - 13A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Glass & Stainless Steel
Compression Resistance 30 Tons
Overall Dimension (MM) 180 Ø x 55
Model QH - 14A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Aluminium Alloy, Glass & Stainless Steel
Compression Resistance 30 Tons
Overall Dimension (MM) 250 Ø x 56
October 2012 R2 Edition www.lumenslab.com 11/13
12. Model QH - 15A
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 30 Hours on Constant Mode
Surface Casement Material Polycarbonate
Compression Resistance 20 Tons
Overall Dimension (MM) 200 x 200 x 48
Model QH - 05F
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 24 Hours on Constant Mode
Surface Casement Material Glass
Compression Resistance 20 Tons
Overall Dimension (MM) 50 x 50 x 50
Model QH - 08C
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 24 Hours on Constant Mode
Surface Casement Material Glass
Compression Resistance 20 Tons
Overall Dimension (MM) 100 x 100 x 60
October 2012 R2 Edition www.lumenslab.com 12/13
13. Model QH - 08E
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 24 Hours on Constant Mode
Surface Casement Material Glass
Compression Resistance 20 Tons
Overall Dimension (MM) 100 x 100 x 62
Model QH - 08H
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 24 Hours on Constant Mode
Surface Casement Material Glass
Compression Resistance 20 Tons
Overall Dimension (MM) 101 x 101 x 51
Model QH - 08F
LUMENS LAB SDN BHD
Luminous Mode Constant Type
Operational Time More Than 24 Hours on Constant Mode
Surface Casement Material Glass
Compression Resistance 20 Tons
Overall Dimension (MM) 200 x 60 x 51
October 2012 R2 Edition www.lumenslab.com 13/13