This document provides an overview of fuel injection systems for spark ignition and compression ignition engines. It discusses the different types of fuel injection for SI engines, including carburetion, throttle body injection, and multi-point fuel injection. For CI engines, it covers the types of fuel injection such as air injection, airless or solid injection, mechanical injection, and electrical injection. Specific CI fuel injection systems like common rail, individual pump, and distributor systems are also examined.
The document provides information on cable gland kits for sealing and retaining armored and unarmored cables. It describes the E1W SOLO LSF kit for armored cables which provides environmental sealing and mechanical retention via an armor wire termination. It also describes the A2 SOLO LSF kit for unarmored cables which provides sealing of the cable outer sheath. Both kits include shrouds and seals and provide specifications on materials, temperature ratings, and cable types and sizes supported. Dimension drawings and ordering information is also included.
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
Fire Protection & Emergency System Junction Boxes & Electrical EnclosuresThorne & Derrick UK
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
This document provides specifications for a single pole street lighting cut-out for 25A fuse links suitable for separate neutral and earth supply networks. It is constructed of thermoplastic for impact resistance and has terminals that can accommodate wiring up to 16mm squared copper or aluminum conductors. It has an IP43 rating and conforms to relevant standards for electrical safety.
The SLF is a single pole cut out designed for street lighting applications. It has a low body split line to allow easy access for cabling and uses tough thermoplastics and electroplated brass to ensure long, reliable service life. The cam operated fuse handle ensures electrical disconnection occurs before removing the fuse carrier for safety. Two versions are available for separate or combined neutral and earth connections.
This document provides an overview of fuel injection systems for spark ignition and compression ignition engines. It discusses the different types of fuel injection for SI engines, including carburetion, throttle body injection, and multi-point fuel injection. For CI engines, it covers the types of fuel injection such as air injection, airless or solid injection, mechanical injection, and electrical injection. Specific CI fuel injection systems like common rail, individual pump, and distributor systems are also examined.
The document provides information on cable gland kits for sealing and retaining armored and unarmored cables. It describes the E1W SOLO LSF kit for armored cables which provides environmental sealing and mechanical retention via an armor wire termination. It also describes the A2 SOLO LSF kit for unarmored cables which provides sealing of the cable outer sheath. Both kits include shrouds and seals and provide specifications on materials, temperature ratings, and cable types and sizes supported. Dimension drawings and ordering information is also included.
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
Fire Protection & Emergency System Junction Boxes & Electrical EnclosuresThorne & Derrick UK
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
This document provides specifications for a single pole street lighting cut-out for 25A fuse links suitable for separate neutral and earth supply networks. It is constructed of thermoplastic for impact resistance and has terminals that can accommodate wiring up to 16mm squared copper or aluminum conductors. It has an IP43 rating and conforms to relevant standards for electrical safety.
The SLF is a single pole cut out designed for street lighting applications. It has a low body split line to allow easy access for cabling and uses tough thermoplastics and electroplated brass to ensure long, reliable service life. The cam operated fuse handle ensures electrical disconnection occurs before removing the fuse carrier for safety. Two versions are available for separate or combined neutral and earth connections.
This document provides specifications for a double pole street lighting cut-out for 25A fuse links suitable for combined neutral and earth supply networks. It details the construction, performance ratings, dimensions, weight, part number, and conformity to standards. The cut-out is made of thermoplastic with brass terminals and copper/bronze contacts. It has an IP43 rating, accepts 25A fuse links, and conforms to BS 7654:1997 standards.
This document provides product information for a glare-free LED bollard luminaire suitable for illuminating floorspaces from low mounting heights, such as forecourts, gateways, and outdoor areas of public and private facilities. The luminaire has an aluminum alloy and stainless steel construction, safety glass, and a pure anodized aluminum reflector. It can be mounted on a foundation or anchorage unit and aligned around 360 degrees. Technical specifications include IP65 dust and water resistance, a 3000K or 4000K LED module, and a service life of over 50,000 hours at an ambient temperature up to 50°C.
The Trojan Mini street lighting isolator has generous cabling access for its size and can accept various cable types and terminations. It can be pre-wired to reduce installation time. Key features include a 32A double pole switched isolator tested to safety standards, fuse holders tested to standards, an IP33D rating, a lockable hinged lid, DIN rail mounting, and a flame retardant ABS enclosure.
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable diameters and armour wire sizes accommodated by each gland reference, along with the gland dimensions. A range of minimum and maximum measurements are provided for cable diameter, ISO thread entry, overall length, and hexagon size. Accessories including backnuts, shrouds, and cleats are also specified. The glands are suitable for single wire armoured, plastic or rubber sheathed cables for use in dry, indoor situations.
This document provides information on various types of single and double pole cut outs for street lighting, including:
- Details on single and double pole cut outs with options for single or double fuses, with diagrams of configurations like single phase single pole, single phase double pole, and three phase double pole.
- Information on terminal blocks and options for standard or optional terminations like 2TT, 3TT, or brass pillar terminals.
- Descriptions of brass or insulated gland plates for cable termination in single, double or triple entry formats to accommodate cables or grommets of various sizes.
This document provides information on cable glands for flameproof, increased safety, and dust protection applications. It includes technical specifications on certification, operating temperature range, ingress protection ratings, and construction/testing standards. Tables are included that show available sizes, entry thread sizes, hexagon dimensions, and punch tool sizes needed for different cable core sizes.
The ELSR-M-BF/AF heating cable is approved for use in potable water applications. It has a small and flexible design that makes it suitable for short heating circuits and installing inside pipelines. Its outer jacket is food-safe and approved for use in water, making it suitable for applications like frost protection of water lines and temperature maintenance in food processing.
This document provides information on cable glands including:
1) The cable glands are certified flameproof, increased safety, and dust protection devices suitable for use in hazardous zones and environments.
2) They provide a barrier seal to cable cores and prevent explosion products from entering the cable. They are available in brass, nickel plated brass, and stainless steel.
3) The document includes selection tables to choose the correct cable gland size based on cable outer diameter and core sizes.
This document provides information on flame retardant and moisture resistant junction boxes from Spelsberg UK. It lists 6 box sizes available from 70mm to 190mm, that comply with DIN and VEC standards and can be used up to 690V. The boxes have stepped push-through nipples and metric accessory compatibility, and are gray in color. Dimensions and part numbers are provided for each box size.
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.
This document provides specifications for LED floodlights suitable for billboard, parking lot, and garden lighting. It details the features of the DL25 and DL40 series lights such as IP66 water and dust resistance, uniform light distribution, low heat output, and 3-year warranty. Simulation results are given for a sample installation using 6 DL25 25W lights on 6m poles showing lux levels from 1m to 6m. Dimensional drawings and specifications are also provided for the DL25 and DL40 models with output from 1,950 to 3,950 lumens and color temperatures of 3000K, 4000K, and 5000K.
The document introduces the Royex Generation 2 rock breaking system, which features a new propellant mix, modular cartridge design, and MaxClip initiation system. The MaxClip system provides improved timing accuracy compared to other pyrotechnical initiation systems. The Royex Gen 2 propellant mix has a higher density and improved oxygen balance for more powerful breaking. The modular cartridge and igniter design allows for flexibility in cartridge sizing and initiation configurations.
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.
Blue tech oil boiler brochure - Docherty GroupDocherty Group
This document provides information about Docherty's Blue-Tech oil boiler. It summarizes that Docherty has been manufacturing heating products since 1960 and its Blue-Tech boiler uses the latest Blue Flame technology, making it the most energy efficient domestic oil boiler in Europe. It produces very low NOx emissions of only 65mg/kWh and has a maximum efficiency of 92.5%. The document provides details on the different Blue-Tech boiler models and flue kits available.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Megger manufactures hand-held test equipment as well as larger insulation testers, oil test equipment and low resistance ohmmeters.
Megger DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550kV.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The newsletter provides information on new and improved products from Maytronics, including:
1) The new Dolphin M600 robotic pool cleaner which offers maximum cleaning performance with minimal effort through features like a dual-drive motor, precise navigation, and a cloud-connected power supply.
2) Updates to the Dolphin Wave 300XL such as improvements to the driving system and a new power supply PCB card.
3) A thicker filter upgrade kit for models like the M600 and S300 that allows for a higher filtration surface area.
This document provides information about garden lighting products made by MADEINITALY. It includes descriptions of floodlights, in-ground lights, and light components. The lights are made of shockproof resin material and have UV-stabilized diffusers. They include energy efficient LED light sources. Technical specifications and diagrams are provided for various light models.
This document provides an overview of enclosure and cabinet products from Fibox, including their dimensions, material compositions, and ingress protection (IP) and impact resistance (IK) ratings. A wide range of enclosure models are described, including street cabinets, modular enclosures, and hazardous location certified enclosures. Accessories such as glands, plates and ventilation devices are also mentioned. The document encourages visiting the Fibox website for more details and customization options.
This document provides an overview of enclosure and cabinet products from Fibox, including their dimensions, material compositions, and ingress protection (IP) and impact resistance (IK) ratings. It describes different product lines such as PC, CAB, EK, MNX, Solid, CARDMASTER, ALU, Euronord, MCE, Piccolo, Quick, Tempo, and EX, highlighting their key features and suitable applications. The document also mentions accessories that can be used with most Fibox enclosures and cabinets.
Burris offers a wide range of tactical riflescopes to suit different needs, from close-range to long-range shooting. Their XTR II series provides versatile zoom and clear glass for target acquisition at all distances. Models include 1-5x24mm, 1.5-8x28mm, 3-15x50mm, 2-10x42mm, 4-20x50mm, 5-25x50mm, and 8-40x50mm options. The MTA series provides an affordable option for competitive and hunting shooters, with models from 1-4x24mm up to 6.5-20x50mm. Both series feature fully-multiplied zoom, quality glass, and
This document provides specifications for a double pole street lighting cut-out for 25A fuse links suitable for combined neutral and earth supply networks. It details the construction, performance ratings, dimensions, weight, part number, and conformity to standards. The cut-out is made of thermoplastic with brass terminals and copper/bronze contacts. It has an IP43 rating, accepts 25A fuse links, and conforms to BS 7654:1997 standards.
This document provides product information for a glare-free LED bollard luminaire suitable for illuminating floorspaces from low mounting heights, such as forecourts, gateways, and outdoor areas of public and private facilities. The luminaire has an aluminum alloy and stainless steel construction, safety glass, and a pure anodized aluminum reflector. It can be mounted on a foundation or anchorage unit and aligned around 360 degrees. Technical specifications include IP65 dust and water resistance, a 3000K or 4000K LED module, and a service life of over 50,000 hours at an ambient temperature up to 50°C.
The Trojan Mini street lighting isolator has generous cabling access for its size and can accept various cable types and terminations. It can be pre-wired to reduce installation time. Key features include a 32A double pole switched isolator tested to safety standards, fuse holders tested to standards, an IP33D rating, a lockable hinged lid, DIN rail mounting, and a flame retardant ABS enclosure.
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable diameters and armour wire sizes accommodated by each gland reference, along with the gland dimensions. A range of minimum and maximum measurements are provided for cable diameter, ISO thread entry, overall length, and hexagon size. Accessories including backnuts, shrouds, and cleats are also specified. The glands are suitable for single wire armoured, plastic or rubber sheathed cables for use in dry, indoor situations.
This document provides information on various types of single and double pole cut outs for street lighting, including:
- Details on single and double pole cut outs with options for single or double fuses, with diagrams of configurations like single phase single pole, single phase double pole, and three phase double pole.
- Information on terminal blocks and options for standard or optional terminations like 2TT, 3TT, or brass pillar terminals.
- Descriptions of brass or insulated gland plates for cable termination in single, double or triple entry formats to accommodate cables or grommets of various sizes.
This document provides information on cable glands for flameproof, increased safety, and dust protection applications. It includes technical specifications on certification, operating temperature range, ingress protection ratings, and construction/testing standards. Tables are included that show available sizes, entry thread sizes, hexagon dimensions, and punch tool sizes needed for different cable core sizes.
The ELSR-M-BF/AF heating cable is approved for use in potable water applications. It has a small and flexible design that makes it suitable for short heating circuits and installing inside pipelines. Its outer jacket is food-safe and approved for use in water, making it suitable for applications like frost protection of water lines and temperature maintenance in food processing.
This document provides information on cable glands including:
1) The cable glands are certified flameproof, increased safety, and dust protection devices suitable for use in hazardous zones and environments.
2) They provide a barrier seal to cable cores and prevent explosion products from entering the cable. They are available in brass, nickel plated brass, and stainless steel.
3) The document includes selection tables to choose the correct cable gland size based on cable outer diameter and core sizes.
This document provides information on flame retardant and moisture resistant junction boxes from Spelsberg UK. It lists 6 box sizes available from 70mm to 190mm, that comply with DIN and VEC standards and can be used up to 690V. The boxes have stepped push-through nipples and metric accessory compatibility, and are gray in color. Dimensions and part numbers are provided for each box size.
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.
This document provides specifications for LED floodlights suitable for billboard, parking lot, and garden lighting. It details the features of the DL25 and DL40 series lights such as IP66 water and dust resistance, uniform light distribution, low heat output, and 3-year warranty. Simulation results are given for a sample installation using 6 DL25 25W lights on 6m poles showing lux levels from 1m to 6m. Dimensional drawings and specifications are also provided for the DL25 and DL40 models with output from 1,950 to 3,950 lumens and color temperatures of 3000K, 4000K, and 5000K.
The document introduces the Royex Generation 2 rock breaking system, which features a new propellant mix, modular cartridge design, and MaxClip initiation system. The MaxClip system provides improved timing accuracy compared to other pyrotechnical initiation systems. The Royex Gen 2 propellant mix has a higher density and improved oxygen balance for more powerful breaking. The modular cartridge and igniter design allows for flexibility in cartridge sizing and initiation configurations.
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.
Blue tech oil boiler brochure - Docherty GroupDocherty Group
This document provides information about Docherty's Blue-Tech oil boiler. It summarizes that Docherty has been manufacturing heating products since 1960 and its Blue-Tech boiler uses the latest Blue Flame technology, making it the most energy efficient domestic oil boiler in Europe. It produces very low NOx emissions of only 65mg/kWh and has a maximum efficiency of 92.5%. The document provides details on the different Blue-Tech boiler models and flue kits available.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Megger manufactures hand-held test equipment as well as larger insulation testers, oil test equipment and low resistance ohmmeters.
Megger DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550kV.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The newsletter provides information on new and improved products from Maytronics, including:
1) The new Dolphin M600 robotic pool cleaner which offers maximum cleaning performance with minimal effort through features like a dual-drive motor, precise navigation, and a cloud-connected power supply.
2) Updates to the Dolphin Wave 300XL such as improvements to the driving system and a new power supply PCB card.
3) A thicker filter upgrade kit for models like the M600 and S300 that allows for a higher filtration surface area.
This document provides information about garden lighting products made by MADEINITALY. It includes descriptions of floodlights, in-ground lights, and light components. The lights are made of shockproof resin material and have UV-stabilized diffusers. They include energy efficient LED light sources. Technical specifications and diagrams are provided for various light models.
This document provides an overview of enclosure and cabinet products from Fibox, including their dimensions, material compositions, and ingress protection (IP) and impact resistance (IK) ratings. A wide range of enclosure models are described, including street cabinets, modular enclosures, and hazardous location certified enclosures. Accessories such as glands, plates and ventilation devices are also mentioned. The document encourages visiting the Fibox website for more details and customization options.
This document provides an overview of enclosure and cabinet products from Fibox, including their dimensions, material compositions, and ingress protection (IP) and impact resistance (IK) ratings. It describes different product lines such as PC, CAB, EK, MNX, Solid, CARDMASTER, ALU, Euronord, MCE, Piccolo, Quick, Tempo, and EX, highlighting their key features and suitable applications. The document also mentions accessories that can be used with most Fibox enclosures and cabinets.
Burris offers a wide range of tactical riflescopes to suit different needs, from close-range to long-range shooting. Their XTR II series provides versatile zoom and clear glass for target acquisition at all distances. Models include 1-5x24mm, 1.5-8x28mm, 3-15x50mm, 2-10x42mm, 4-20x50mm, 5-25x50mm, and 8-40x50mm options. The MTA series provides an affordable option for competitive and hunting shooters, with models from 1-4x24mm up to 6.5-20x50mm. Both series feature fully-multiplied zoom, quality glass, and
TOMAR Electronics design and manufacture highly reliable and efficient LED and strobe signal warning light systems, strobe beacons and audible alarms for hazardous area, explosion proof and non-hazardous area environment industries. TOMAR has been manufacturing their products for over 40 years and their warranties are among the longest in the industry, made possible due to the rigorous quality control standards and detailed inspections during the production process.
TOMAR products include: Hazardous Area & Explosion Proof LED / Strobe Warning / Signal Lighting LED Strobe Beacons Optical Preemption and Priority Control Systems Halogen Flood Lighting Alarm Sirens LED Lightbars Lightsticks & Traffic Directors LED, Strobe & Halogen Lightheads Digital Sirens & Control Panels Self-contained Systems Emergency Vehicle Systems Traffic Control Systems - STROBECOM II & STROBESWITCH II Fire Alarms Power Supplies
TOMAR industry solutions: Fire/EMS, Law Enforcement, Industrial, Amber Warning Products and Traffic
Thorne & Derrick are worldwide exporters of LV, HV & Hazardous Area Cable Installation & Electrical Equipment - we service UK and global businesses involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. T&D service utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
TOMAR hazardous area and explosion proof signal and warning light systems meet UL, CSA, NEMA and IECEx standards. Typical applications for the hazardous area, explosion proof LED and strobe lighting include manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants, offshore and dockside installations, agricultural, commercial, industrial, mining and marine facilities.
As described on www.iecex.com, the IECEx system is an international conformity system where a mark of conformity will be granted by approved IECEx certifiers (ExCBs) located in IECEx participating countries for equipment that is covered by an IECEx Certificate of Conformity and hence has been tested and manufactured under systems that are under ongoing surveillance by ExCBs. IECEx gives hazardous area industries an assurance that the electrical equipment being supplied for use in areas where flammable gases and vapours and combustible dusts (termed explosive atmospheres) are present, meet the world's most respected and vigorous safety standards.
The document discusses equipment from Brokk and Bricking Solutions for refractory maintenance. Brokk manufactures remote-controlled demolition robots for safe tear out of refractory. Bricking Solutions produces equipment for installing new refractory efficiently and safely, such as bricking machines, inspection cages, access ramps, and a muck bucket. Working together, their full system aims to minimize kiln downtime for maintenance by improving safety, speed, and quality.
The document provides contact location information for ITT connector products worldwide. It lists specific location details including addresses and phone/fax numbers for offices in Germany, Hong Kong, Italy, and the UK, as well as the USA. It also includes a table of contents for specifications and product information on Cannon CA-Bayonet connectors.
The document discusses MONOLITE valve regulated lead-acid batteries produced by FIAMM. It summarizes that MONOLITE batteries are highly reliable, require little maintenance, and are suitable for a variety of standby applications. The document then provides details on the technical features of MONOLITE batteries, including thick plates and grids, microporous glass mat separators, flame-retardant plastic containers, and safety valves. Standards that MONOLITE batteries comply with are also listed.
The document describes three types of electric roller blinds:
1) Electric 3e Blind powered by 240V with a motor concealed in the fabric roller and controlled by wall switch or remote.
2) Battery 3e Blind powered by rechargeable batteries with no wiring and controlled remotely.
3) Solar 3e Blind powered by a discreet solar panel charging the batteries and also controlled remotely.
All three blinds feature a contoured headbox, various fabric options, and maximum sizes of 3 meters wide and 3.5 meters high. They are suitable for both domestic and commercial use such as offices, education, hospitality, and healthcare.
Explore Solo Qbox's unique benefits: boost productivity, amplify efficiency, and streamline solo workflows. Master independence and elevate your performance with the ultimate solo solution.
#soloqbox
The document compares the features of the NEWPRO 2000 window model to competitors' models. The NEWPRO 2000 includes a triple pane glass system, composite frame and sash that is 70% stronger than vinyl, a beveled frame for aesthetics and light exposure, tilt-in sash for easy cleaning, security locks, triple seal weatherstripping to eliminate drafts, snap-in glazing for easy glass replacement, custom installation by trained professionals, and a 50-year warranty. It claims the NEWPRO 2000 can reduce heat loss through windows by 40% according to the Department of Energy.
This document provides application instructions for Fire Security Systems' FS11 and FS15 cable coatings. It includes recommendations for equipment such as pumps, hoses, spray guns and tips for airless application of the coatings. Guidelines are provided for surface preparation, application procedures, drying time, and clean up. The coatings are intended to enhance fire resistance of electrical cables and prevent rapid fire propagation. Proper application following the instructions is important to maintain the coatings' fire protection performance.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
The Indian government has been working over the past few years to include elements of ITS in the transport sector. This standard ensures the optimal operation of the current transport infrastructure. It also increases the efficiency, safety, comfort, and quality of the system. That is why the government created the AIS-140 standard. Compliance with this standard means all vehicles used for public transit must have panic buttons and vehicle tracking modules installed. Nevertheless, in future in the standard protocol of AIS-140 you can expect fare collection and CCTV capabilities.
Get more information here: https://blog.watsoo.com/2023/12/27/all-about-prithvi-ais-140-gps-vehicle-tracker/
1. Smok Guardian III Kit Review
This presentation aims to show
you Smok Guardian III Kit
www.vaporvaping.com
2.
3. What is Smok Guardian III Kit
Guardian III Kit is another masterpiece of e-cigarettes
from Smoktech.Under its black piano lacquer finish,
there is a powerful "system ".Guardian III Kit, a perfect
combination of the 75w TC pipe mod , Guardian pipe
III and the revolutionary Mircro TFV4 Plus , will bring
you an awesome vaping experience .With bigh OLED
display and Bluetooth 4.0 technology , it can allow you
to track your puff data at ease .Holding this compact kit,
you can feel its outstanding performance and unique
philosopher style .Once owned , always be accompanied
.
4. Where To Buy Smok Guardian III Kit
• The Smok Guardian III Kit coming soon !
Smok Guardian III Kit will be available to
buy in vaporvaping.com , click here to get
the details :
http://www.vaporvaping.com/smok-
guardian-iii-kit-75-tc-mod-with-micro-tfv4-
plus-tank-p-428.html
6. TEXTURED FINISH
• COMFORTABLE TO HOLD
• Guardian III kit with black
piano lacquer finish
shows low-profile, classic,
and premium. And this
compact and portable kit
is comfortable to hold and
very easy to use.
7. 5ML REPLACEMENT
GLASS TUBE & EXTENSION ADAPTER
• This kit includes a 5ml replacement glass tube and tank extension adapter so that
you can enjoy Guardian III kit without having to refill as often.
8. 510 RDA DRIP TIP
• FOR TOTALLY NEW EXPERIENCE (NOT INCLUDED)
• The 510 RDA drip tip with the V shape airflow channel
will definitely create a totally different vaping experience
that most people shall like. And its cone-like body looks
pretty cool!
9. TOP REFILL SYSTEM
• Top refill system makes filling as easy as it gets。
Leak proof e-liquid slot can significantly solve
leaking problem.
10. ADJUSTABLE AIRFLOW SYSTEM
• Bring you an extremely open draw。 Airflow can be adjusted freely
by either turning the ring on the drip tip or the one at the base of
atomizer
12. MICRO SIZE
• WITHOUT SACRIFICING PERFORMANCE
• Micro TFV4, a special edition of the revolutionary TFV4 tank, is
customized for Micro One. With two sub-ohm cores, 0.3Ω Micro
CLP2 Core and 0.25Ω Micro STC2 Core, it will bring you
unexpected taste and huge cloud.
13.
14.
15. GRAPHIC USER INTERFACE
• The graphic user interface has been improved to
be more simple and understandable to everyone.
21. MAGNETIC BATTERY COVER
• The magnetic battery cover design allows you to
quickly replace battery without tools.
22. ADVANCED BLUETOOTH 4.0 TECHNOLOGY
With a built-in Bluetooth 4.0 module, Guardian
PIPE III can be fully controlled by your
Smartphone. Download the App and Have a Try!
24. REPLACEABLE & RECHARGEABLE BATTERY
DESIGN
Guardian Pipe III takes one 18650 battery (not
included) that can be removed and replaced or
recharged via 510 USB charger (included).