This document outlines the procedures and guidelines for an assessment on welding carbon steel plates and pipes using shielded metal arc welding (SMAW). The assessment will include a demonstration, oral questioning, and written test to evaluate core competencies. Examinees are reminded of facility locations, assessment rules, rights and appeals processes, and occupational health and safety practices to ensure a fair and secure assessment.
5. Reminders
For your personal needs the
comfort rooms and the canteen is
located outside of this building.
During the assessment, you are not
allowed to leave the premises of the
assessment center.
6. Dos and Donts
Before the assessment, any questions or
matter you want to clarify will be
entertained.
Once the assessment has started, please
refrain from asking questions, it is no
longer allowed.
If you have physical difficulties, please call
my attention so that we can address it
immediately.
7. Rights and Appeal System
In case you have questions
regarding the assessment result,
you have the right to appeal. Just
submit your appeal to the TESDA
provincial office where the
assessment center and the assessor
is accredited.
8. Issuance of National Certificate
The National Certificate can be claim at
TESDA provincial office within 3 to 5
working days after assessment. Bring
passport size picture with white
background, and also 100 pesos for
processing fee.
10. Occupational Safety and Health
Make sure to check the tools, materials
and equipment before using it.
Observe safety as you perform different
task.
Please call my attention in case of
accidents.
If you need some medicine, you can get it
on our medicine cabinet located at the
corner in this room.
Checking of tools and materials …Good morning!
I AM Alvin Q. Baraoil, I am an accredited competency assessor for SMAW NCII
I would like to acknowledge the presence of MR. JAMES BARTOLOME, our representative from TESDA Provincial Office.
Thank you sir for giving the assessors guide and specific instruction candidates
You dont have to worry about their presence because they only here to check if the conduct of assessment is in accordance with the prescribed competency assessment methodology and procedures. They will not here to assess you.
Before we start, let me first check the attendance. (Hand over the attendance sheet)
READ THE HAND OUTS
This qualification for SHIELDED METAL ARC WELDING NCII is composed of BASIC, COMMON and CORE competencies
NEXT SLIDE
We have Core competencies namely:
WELD CARBON STEEL PLATES AND PIPES USING SMAW
There 3 methods that will be used in this assessment;
Demonstration
Oral Questioning
Written Test
This will help you to measure your stock knowledge and skills
NEXT SLIDE
(Read content)
And if you have difficulty understanding the given instructions, please do not hesitate to inform me because I am more than willing to translate it for you. Also, if you have problems in your written, do not be shy because we can accept your answer verbally.
NEXT SLIDE
(Read content)
NEXT SLIDE
(Read content)
NEXT SLIDE
(Read content)
NEXT SLIDE
If you found Not competent do worry about it because you can be re-assess anytime at your own convenience. If you failed full qualification, you need to undergo the whole process of the assessment.
But in COC, you are only going to be assess on the competencies that you were found not yet competent.
Reminder, Fail to pass the assessment 2 consecutive times, you will be advised to undergo a refresher course before applying a re-assessment.
NEXT SLIDE
(Read content)
NEXT SLIDE
We stablish strict confidentiality, to ensure your integrity. The result is only made available to authorized personnel and to the institution where you had your actual training. In relation to this, the assessment package is kept in a source place to guarantee the integrity of the assessment package. For this, may I ask all the candidates to regram from giving away any form of information that took place during the assessment process.
If you dont have any questions, we will now proceed to assessment proper
NEXT SLIDE
So now proceed to assessment area for the demonstration and after that we will have the oral questioning and the written test.
I will now distribute the specific instructions (hand it over)
Please read them carefully and do not hesitate to ask questions right now. I may be able to translate it from English or to your local dialect.
Any question?
CANDIDATE NUMBER 1
YOU must be ready now. So candidate number 1, you may please proceed to the assessment area WAAALKKK TOWARDS ASSESSMENT AREA. Read your hand outs
Candidate number 1, this is our assessment area where you are going to Perform Groove on Carbon Steel Plates. Kindly read the specific instructions again. If you have any questions, you may ask me right now because once the assessment begins you can no longer ask any more questions.
If none you may start now!(okay thank you)
The candidate performs the task:
Candidate number 1 please sit down. You were able to perform all the task correctly, however you were not confident during answering the questions but anyway you answered it correctly. This means that you are knowledgeable enough about SMAW NCII. I would like to congratulate you for a job well done! I found you already competent. Please sign the competency result summary
For the issuance of your NC-II you can claim it after 3 working days. Again congratulations!
Pero kun waray ka pumasar you can re-assess any time at your convenience. If you have doubts regarding the assessment results, you have the right to appeal.
Pero kay pumasar man aw kay hayahay.
(Submit all the Documents to the TESDA Representative)
Please perform 5s before you go, Thank you!