The document discusses responsibilities for contractors working on a construction project. Contractors must verify all dimensions on site before beginning work. Any errors or discrepancies found in drawings, specifications, or other contract documents must be reported in writing to the designer within two days of discovery. The designer will not assume responsibility or liability if contractors do not follow these instructions. The document was produced using an Autodesk educational product.

1. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT

3. CONTRACTOR(S) TO VERIFY ALL DIMENSIONS ON SITE
PRIOR TO COMMENCING WORK. ALL ERRORS AND
OMISSIONS AND ALL DISCREPANCIES ON THE
DRAWINGS AND SPECIFICATIONS AND OTHER
CONTRACT DOCUMENTS, MUST BE FORWARDED IN
WRITING TO THE DESIGNER WITHIN TWO (2) DAYS,
UPON DISCOVERY. THE DESIGNER DOES NOT
ASSUME ANY RESPONSIBILITY AND LIABILITY IF THESE
INSTRUCTIONS ARE NOT MET.
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT
PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT