This document summarizes an internship presentation on industrial automation technology at Rexroth Bosch. The presentation covered topics like the history and uses of programmable logic controllers (PLCs), industrial pneumatics and hydraulics, and applications of PLC controlled pneumatics and hydraulics. It also described a case study where a PLC program was designed to automatically control a tablet filling process using a conveyor belt, funnel, and start/stop buttons. The presentation software used was IndraWorks ML 12V12 Patch 10 by Rexroth Indraworks.

1. R N S INSTITUTE OF TECHNOLOGY
(AICTE Approved, VTU Affiliated, NAAC ‘A’ Grade Accredited)
UG Programs - CSE, ECE, ISE, EIE and EEE have been Accredited by NBA for the
Academic years 2018-19, 2019-20 and 2020-21Dr. Vishnuvardhan Road, Channasaandra,
Rajarajeshwari Nagara Post, Bengaluru-560 098
DEPARTMENT OF MECHANICAL ENGINEERING
INTERNSHIP PRESENTATION ON
INDUSTRIAL AUTOMATION TECHNOLOGY
REXROTH BOSCH
Presented by,
SIDHAANTH BHEEMAIAH 1RN18ME102
Guide
Mr RAKSHITH A N
Asst Professor, Dept. of Mechanical Engineering
RNSIT, Bengaluru
VISVESVARAYA TECHNOLOGICAL UNIVERSITY
JNANA SANGAMA, BELAGAVI-590018

2. CONTENTS
• INTRODUCTION
• HISTORY OF PLC
• PLC USES
• INDUSTRIAL PNUEMATICS AND HYDRAULICS
• APPLICATIONS
• PLC CONTROLLED PNEUMATICS AND HYDRAULIC
CASE STUDY(PROJECT)

3. INTRODUCTION
• Programmable Logic Controller
• It is an industrial digital computer.
• It is capable of storing instructions to implement control functions
such as sequencing, timing, counting, arithmetic, data manipulation
and communication
• The PLC has I/O interfaces that provide the connection between the
PLC and the information providers (inputs like pushbuttons, sensors,
and the controllable devices (outputs like valves, relays, lamps,)

4. HISTORY OF PLC
• PLC was born in an automotive industry in USA.
• Before PLC, the control ling sequencing, and safety interlock logic in
automobile manufacturing industries was accomplished using
hundreds or thousands of relays, cam timers, drum sequencers and
dedicated closed loop controllers.
• The process for updating such facilities was very time consuming and
expensive, as electricians needed to individually rewire each and
every relay.

5. PLC USES
• The PLC controls industrial
machines in a manufacturing unit.
• They are used in assembly line,
robotic devices, and any activity
that requires high reliability
control and ease of programming
and process fault diagnosis.
• Materials handling, packaging,
palletizing, milling, boring,
grinding, filling, sorting, weighing
are the different industries using
PLC.

6. INDUSTRIAL PNEUMATICS AND HYDRAULICS
• Pneumatics
• A pneumatic system is a system that uses compressed air to
transmits and control energy. Pneumatic systems are used
extensively in various industries.
• Compressed air is the air from the atmosphere which is reduced in
volume by compression thus increasing its pressure.
• Hydraulics
• The word hydraulics is based on the Greek word for water, and
originally covered the study of the physical behavior of water at
rest and in motion.
• Use has broadened its meaning to include the behavior of all
liquids, although it is primarily concerned with the motion of
liquids

7. APPLICATIONS
• HYDRAULICS
• Industrial Trucks Travel drives
• Flight Simulators
• Machine tools and transfer lines
• Lifting and conveying devices
• PNEUMATIC
• Clamping
• Shifting
• Ejection
• Braking

8. PROBLEM STATEMENT
• TO DESIGN A PLC PROGRAM TO MAKE AN AUTOMATIC TABLET FILLER
• THE SEQUENCE IS AS FOLLOWS:
-WHEN THE START BUTTON IS PRESSED THE CONVEYOR BELT IS SHOULD
START MOVING TILL THE TUBE COMES BELOW THE FUNNEL CONTAINING
TABLETS.
-THEN THE FUNNEL SHOULD OPEN AND FILL THREE TABKETS INTO THE
TUBE BEFORE CLOSING IT.
-AFTER THE TUBE IS FILLED WITH THREE TABLETS THE CONVEYOR BELT
SOULD START MOVING AGAIN.
-THE ABOVE PROCESS SHOULD REPEAT UNTIL THE STOP BUTTON IS
PRESSED.
-SOFTWARE USED
• INDRAWORKS ML 12V12 PATCH 10, BY REXROTH INDRAWORKS

10. • .
START
FUNNEL OPENS
AND FILLS
THREE TABLETS
AFTER THREE
TABLETS ARE
FILLED
CONVEYOR BELT
MOVES
FORWARD
REPEAT UNTIL
THE STOP
BUTTON IS
PRESSED

11. EQUIPMENT LIST

12. PLC WIRING

13. LADDER DIAGRAM

14. APPLICATION
* It is used in civil applications
like washing machines ,
elevators, traffic signals
control etc.
*It is used in aerospace for
water tank quenching system.
*It is used in travel industry for
escalator operations, monitored
safety control system.

15. THANK YOU