Shebourne earlier marketing flyer 466774 4
•
1 like•447 views
The document summarizes an 89-acre property for sale located near Spokane International Airport in Airway Heights, Washington. The property has frontage on Highway 2 and Fairview Heights Road, and is already platted into 5-acre tracts. It has broad regional commercial and light industrial zoning allowances. The front 18 acres are zoned for regional commercial uses while the remainder allows for light industrial.
Report
Share
Report
Share
Download to read offline
Recommended
E. Washington State Commercial-Industrial Development land
This listing is for 89 acres of vacant land for sale in Airway Heights, Washington along Highway 2 for $895,000. The land is zoned for commercial and light industrial uses. It has over 1,100 feet of highway frontage and is located across from a new casino. The property has access to highways, utilities including water and sewer, and is in a fast-growing area near Spokane International Airport planned for aerospace expansion.
Fairview heights 89 acre land flyer update
The document provides information on an 89 acre commercial development tract for sale in Fairview Heights, Washington. The tract has over 1,100 feet of frontage on US Highway 2 and is platted into 4.6 acre parcels. It is zoned for commercial and light industrial uses. The property is located near the Spokane International Airport and has access to major transportation routes.
Cbs simchuk89 abc - Simchuk Commercial US2 development property
Commercial property available across the street from the newly announced Hard Rock Casino gaming complex
Airway heights industrial commercial tract
The 109-acre property is listed for $1,296,000 and can be purchased all together or in parts consisting of approximately 5-acre tracts. The land has divisions zoned for commercial, light industrial, and rural traditional uses, and includes access to existing roads and utilities. Potential buyers are encouraged to make offers on all or portions of the property.
Fairview heights 109 acre land flyer a b c d final 8x11
The document describes four parcels of land totaling 89 acres for sale in Fairview Heights, WA for commercial and light industrial development. Parcel A is 8.9 acres of commercial and 19.6 acres of light industrial for $550,000. Parcel B is 9.1 acres commercial and 14.7 acres light industrial for $500,000. Parcel C is 36.7 acres of light industrial for $295,000. The document provides details on zoning, utilities, road access, nearby developments and transportation. It is being sold by Douglas Rall of Schneidmiller Realty.
Hotel in The Bahamas for Sale
This document provides details about a luxury resort hotel located on 19+ acres of beach, canal, and land in the tax-free Bahamas. The resort includes 156 guest rooms across a tower building and pool wing totaling over 191,000 square feet, as well as 7 rooms across 3 villas. Amenities include over 800 feet of private beach, multiple pools, a dock with 75 boat slips, bars, restaurants, meeting spaces, a gym, and potential for commercial development on the property. Specifics are given on the layout and features of the pools, villas, dock, bars, and other public areas.
Vacation Homes in Goa | Adora De Goa | The Park Residences around The Blu
1 BHK Apartment in Goa - Find yourself indulging in some fine living at Adora De Goa. Lead a life that feels like a vacation at the Provident luxury affordable residential project in Goa. An affordable yet plush residence that embraces the true spirit of the state.
Flat for sale in Dabolim, 1 BHK Apartment in Goa, 2 BHK Flats in Goa, 3 BHK Flat in Dabolim
https://www.providenthousing.com/projects/goa/park-residences-around-blu-at-adora-de-goa
507 cattail vflyer
This listing is for a 3 bedroom, 2 bathroom home located at 507 Cattail in Harker Heights, Texas. The home was built in 2006 and has 1898 square feet with a 0.24 acre lot. Interior amenities include a kitchen island, breakfast bar, formal dining room, double shower, and walk-in closets. Exterior features include a fenced yard, patio, and hardy plank siding. The home is listed for $163,000 and is represented by agent Paula Raymond of Texas Heritage Real Estate.
Recommended
E. Washington State Commercial-Industrial Development land
This listing is for 89 acres of vacant land for sale in Airway Heights, Washington along Highway 2 for $895,000. The land is zoned for commercial and light industrial uses. It has over 1,100 feet of highway frontage and is located across from a new casino. The property has access to highways, utilities including water and sewer, and is in a fast-growing area near Spokane International Airport planned for aerospace expansion.
Fairview heights 89 acre land flyer update
The document provides information on an 89 acre commercial development tract for sale in Fairview Heights, Washington. The tract has over 1,100 feet of frontage on US Highway 2 and is platted into 4.6 acre parcels. It is zoned for commercial and light industrial uses. The property is located near the Spokane International Airport and has access to major transportation routes.
Cbs simchuk89 abc - Simchuk Commercial US2 development property
Commercial property available across the street from the newly announced Hard Rock Casino gaming complex
Airway heights industrial commercial tract
The 109-acre property is listed for $1,296,000 and can be purchased all together or in parts consisting of approximately 5-acre tracts. The land has divisions zoned for commercial, light industrial, and rural traditional uses, and includes access to existing roads and utilities. Potential buyers are encouraged to make offers on all or portions of the property.
Fairview heights 109 acre land flyer a b c d final 8x11
The document describes four parcels of land totaling 89 acres for sale in Fairview Heights, WA for commercial and light industrial development. Parcel A is 8.9 acres of commercial and 19.6 acres of light industrial for $550,000. Parcel B is 9.1 acres commercial and 14.7 acres light industrial for $500,000. Parcel C is 36.7 acres of light industrial for $295,000. The document provides details on zoning, utilities, road access, nearby developments and transportation. It is being sold by Douglas Rall of Schneidmiller Realty.
Hotel in The Bahamas for Sale
This document provides details about a luxury resort hotel located on 19+ acres of beach, canal, and land in the tax-free Bahamas. The resort includes 156 guest rooms across a tower building and pool wing totaling over 191,000 square feet, as well as 7 rooms across 3 villas. Amenities include over 800 feet of private beach, multiple pools, a dock with 75 boat slips, bars, restaurants, meeting spaces, a gym, and potential for commercial development on the property. Specifics are given on the layout and features of the pools, villas, dock, bars, and other public areas.
Vacation Homes in Goa | Adora De Goa | The Park Residences around The Blu
1 BHK Apartment in Goa - Find yourself indulging in some fine living at Adora De Goa. Lead a life that feels like a vacation at the Provident luxury affordable residential project in Goa. An affordable yet plush residence that embraces the true spirit of the state.
Flat for sale in Dabolim, 1 BHK Apartment in Goa, 2 BHK Flats in Goa, 3 BHK Flat in Dabolim
https://www.providenthousing.com/projects/goa/park-residences-around-blu-at-adora-de-goa
507 cattail vflyer
This listing is for a 3 bedroom, 2 bathroom home located at 507 Cattail in Harker Heights, Texas. The home was built in 2006 and has 1898 square feet with a 0.24 acre lot. Interior amenities include a kitchen island, breakfast bar, formal dining room, double shower, and walk-in closets. Exterior features include a fenced yard, patio, and hardy plank siding. The home is listed for $163,000 and is represented by agent Paula Raymond of Texas Heritage Real Estate.
Final evaluating materialremoval
Deburring and Finishing Processes explained by AF Kenton a long-time process developer and OEM (Original equipment Manufacturer)
Isotropic mass finishing
This document discusses how isotropic mass finishing processes can improve part performance and service life. It begins by describing how many manufacturers still rely on outdated manual deburring methods instead of considering edge and surface finishing during initial planning. This leads to higher costs when parts fail quality standards due to burrs or surfaces. The document then explains how mass finishing processes can produce uniform, isotropic surface textures with compressive residual stresses. This improves part wear resistance, fatigue life, and consistency compared to directional textures from machining. Specifically, isotropic mass finishing can produce negatively skewed, plateaued surfaces instead of positively skewed surfaces from other processes. It concludes that these surface alterations from mass finishing often improve part performance in unexpected ways.
Jack clark resume
Jack R. Clark is an experienced manager, lecturer, consultant and engineer with over 30 years of experience in systems development, surface finishing, and mechanical design. He holds a BS in Electrical Engineering from New York University and has taught at Colorado State University. He has extensive professional affiliations and has published several articles on surface metrology topics. His career includes experience as a consultant, engineering manager, and director of surface technology divisions for various companies.
MRO SME inwac tour
The SME Spokane chapter 248 toured the Maintenance, Repair and Overhaul (MRO) area of Spokane International Airport. They visited XN Air, a fixed-base operator that provides services like fueling, hangaring, and aircraft maintenance. Todd Woodard from the airport explained plans to expand manufacturing and industrial activity in the MRO area. Chris Martens described the operations of an FAA-certified repair station that repairs aviation electronics.
Turbo sme-99
Turbo-Abrasive Machining in the Continuous Flow Environment Dr Michael Massarsky. Turbo-Finish Corporation, 917 518 8205 michael@turbofinish.com
turbofinish.wordpress.com
MFI Mass Finishing Equipment and Media
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Centrifugal Iso-Finishing
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal iso-finishing is a high-speed mass finishing method that can produce very refined surface finishes on parts in short cycle times. It can be used for deburring, contouring edges, and developing surface finishes that improve part performance, integrity, and lifespan. Centrifugal iso-finishing involves processing parts with abrasives or polishing materials under high surface pressure to truncate peaks and create uniformly compressed stresses in the surface. This improves part wear resistance, fatigue resistance, and ability to withstand repeated stresses compared to surfaces finished by conventional methods.
Iso-Finishing sample part finishing application form
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance info
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Gear Finishing Technical Intewrview
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishing
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products TECHNOVIBE Series
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processing
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
More Related Content
Viewers also liked
Final evaluating materialremoval
Deburring and Finishing Processes explained by AF Kenton a long-time process developer and OEM (Original equipment Manufacturer)
Isotropic mass finishing
This document discusses how isotropic mass finishing processes can improve part performance and service life. It begins by describing how many manufacturers still rely on outdated manual deburring methods instead of considering edge and surface finishing during initial planning. This leads to higher costs when parts fail quality standards due to burrs or surfaces. The document then explains how mass finishing processes can produce uniform, isotropic surface textures with compressive residual stresses. This improves part wear resistance, fatigue life, and consistency compared to directional textures from machining. Specifically, isotropic mass finishing can produce negatively skewed, plateaued surfaces instead of positively skewed surfaces from other processes. It concludes that these surface alterations from mass finishing often improve part performance in unexpected ways.
Jack clark resume
Jack R. Clark is an experienced manager, lecturer, consultant and engineer with over 30 years of experience in systems development, surface finishing, and mechanical design. He holds a BS in Electrical Engineering from New York University and has taught at Colorado State University. He has extensive professional affiliations and has published several articles on surface metrology topics. His career includes experience as a consultant, engineering manager, and director of surface technology divisions for various companies.
MRO SME inwac tour
The SME Spokane chapter 248 toured the Maintenance, Repair and Overhaul (MRO) area of Spokane International Airport. They visited XN Air, a fixed-base operator that provides services like fueling, hangaring, and aircraft maintenance. Todd Woodard from the airport explained plans to expand manufacturing and industrial activity in the MRO area. Chris Martens described the operations of an FAA-certified repair station that repairs aviation electronics.
Turbo sme-99
Turbo-Abrasive Machining in the Continuous Flow Environment Dr Michael Massarsky. Turbo-Finish Corporation, 917 518 8205 michael@turbofinish.com
turbofinish.wordpress.com
Viewers also liked (8)
More from Dave Davidson
MFI Mass Finishing Equipment and Media
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Centrifugal Iso-Finishing
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal iso-finishing is a high-speed mass finishing method that can produce very refined surface finishes on parts in short cycle times. It can be used for deburring, contouring edges, and developing surface finishes that improve part performance, integrity, and lifespan. Centrifugal iso-finishing involves processing parts with abrasives or polishing materials under high surface pressure to truncate peaks and create uniformly compressed stresses in the surface. This improves part wear resistance, fatigue resistance, and ability to withstand repeated stresses compared to surfaces finished by conventional methods.
Iso-Finishing sample part finishing application form
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance info
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Gear Finishing Technical Intewrview
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishing
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products TECHNOVIBE Series
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processing
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing contract services
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso-Finishing 3D parts
This document discusses high-speed post-processing of 3D printed parts using centrifugal iso-finishing to speed up workflows and reduce bottlenecks. It invites contacting the sender to arrange running sample parts through their free surface finishing program to see how it improves the process.
Centrifugal iso finishing - part dividers
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processes
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal Iso-Finishing Equipment
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment description
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
More from Dave Davidson (20)
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Iso-Finishing sample part finishing application form
Iso-Finishing sample part finishing application form
MFI full finishing product catalog with technical assistance info
MFI full finishing product catalog with technical assistance info
It's the Finish that Counts. Technical Magazine article reprint.
It's the Finish that Counts. Technical Magazine article reprint.
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV Products - Vibratory Finishing machinery for deburring and polishing
BV Products - Vibratory Finishing machinery for deburring and polishing
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing for Additive Manufactured Parts
Shebourne earlier marketing flyer 466774 4
- 1. ♦ Near Spokane Int. Airport, City of Spokane, Fairchild AFB, and I-90. ♦ Across Hwy 2 from Spokane Tribes new Spoko Gas and Casino. ♦ Broad uses for regional commercial and light industrial zoning, see attached uses. ♦ Traffic on Hwy 2 approximately 17,000 per day. ♦ Total of 89 acres available, already platted into tracts. ♦ Excellent location with frontage on Hwy 2 and South Fairview Heights Road. DEVELOPMENT LAND HWY 2 FRONTAGE, AIRWAY HEIGHTS, WA 38 Acres Hwy 2 Frontage $2,850,000 51 Acres Fairview Heights Rd . Frontage $879,750. • • ALREADY PLATTED INTO 5 ACRE TRACTS SEE MAP • HWY 2 FRONTAGE 1,169’ FEET • FAIRVIEW HTS. RD. FRONTAGE 1,343 FEET • 60’ EASEMENT TO CRAIG RD. ON EAST • WATER AND SEWER 400 +/- FEET TO THE EAST • PLATTED ROAD FROM HWY 2 • FRONT 18 ACRES ZONED REGIONAL COMMERCIAL, BALANCE LIGHT INDUSTRIAL • BROAD RANGE OF USES ALLOWED 2000 NW Blvd. Ste. 200 Coeur d Alene, ID 83814 LISTING AGENT: DOUGLAS V. RALL Doug’s Phone: 208-640-5147 Fax: 208-765-9150 E-mail: douglasrall@msn.com SCHNEIDMILLER REALTY COMMERCIAL AND LIGHT INDUSTRIAL ZONING
- 2. Regionally located West of the City of Spokane, between Spokane International Airport and Fairchild Air Force Base New development on Highway 2 near the subject includes: ⇒ Walmart ⇒ Movie Theatre ⇒ Spoko Gas and proposed casino ⇒ Fast food restaurants ⇒ Motel This area enjoyed great growth and prosperity the past several years and is poised for continued expansion during the next wave of growth.
- 3. ALREADY PLATTED INTO TRACTS