The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
1. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 1 -
10G 1290nm 10km CDWM SFP Transceiver
Specification Revision Record
Date Version Page Revision Description Prepare Approve
20200601 1.0 Zhang S
All right reserved by Guilin GLsun Science and Tech Group Co., LTD. Without written permission,
any unit or individual can’t reproduce, copy or use it for any commercial purpose.
Product 10G 1290nm 10km CDWM SFP Transceiver
Model SFP-10G-CWDM-1290-10-T02
File No. SFP-10G-CWDM-1290-10-T02#141030
Version 1.0
Issuing Date 2020-6-1
- 1 -
2. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 2 -
Product Description
SFP-10G-CWDM-1290-10-T02 CWDM DFB 10Gbps SFP+ transceiver is designed to transmit and receive
optical data over single mode optical fiber for link length 10km. This transceiver consists of two sections:
The transmitter section incorporates a CWDM DFB laser. And the receiver section consists of a PIN
photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics
functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time
access to device operating parameters such as transceiver temperature, laser bias current, transmitted
optical power, received optical power and transceiver supply voltage.
Product Feature
Supports 9.95 to 11.5Gb/s bit rates
Duplex LC connector
Hot pluggable SFP+ footprint
Uncooled 1290nm DFB transmitter, PIN photo-detector
Applicable for 10km SMF connection
Low power consumption, < 1W
Digital Diagnostic Monitor Interface
Optical interface compliant to IEEE 802.3ae 10GBASE-LR
Electrical interface compliant to SFF-8431
Operating case temperature: 0 to 70 °C (commercial)
Application
10GBASE-LR/LW at 10.3125Gbps
10G Ethernet
Other optical links
Functional Diagram
3. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 3 -
Absolute Maximum Ratings
Parameter Symbol Min Max Unit Note
Supply Voltage Vcc -0.5 4.0 V
Storage Temperature Ts -40 85 °C
Relative Humidity RH 0 85 %
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristic
Parameter Symbol Min. Typ Max. Unit Note
Data Rate DR 9.95 10.3125 Gb/s
Supply Voltage Vcc 3.13 3.3 3.47 V
Supply Current Icc 300 mA
Operating Case
Temp.
Tc 0 70
°C
TI -40 85
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data
input swing
VIN,PP 180 700 mVpp 1
Transmit Disable
Voltage
VD VCC-0.8 Vcc
V
Transmit Enable
Voltage VEN Vee Vee+0.8
Input differential
impedance
Rin 100 Ω
Receiver
Differential data
output swing Vout,pp 300 850 mVpp 2
Output rise time
and fall time
Tr, Tf 28 2.0 Vcc+0.3 Ps 3
LOS asserted VLOS_F VCC-0.8 Vcc V 4
LOS de-asserted VLOS_N Vee Vee+0.8 V 4
4. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 4 -
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s
and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board.
Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ λ-7.5nm λ λ+7.5nm nm 1
Ave. output power
(Enabled)
PAVE -6 0 dBm 2
Side-Mode
Suppression Ratio
SMSR 30 dB
Extinction Ratio ER 4 5 dB
RMS spectral width Δλ 1 nm
Rise/Fall time
(20%~80%)
Tr/Tf 50 ps
Dispersion penalty TDP 3.2 dB
Relative Intensity
Noise
RIN -128 dB/Hz
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength λ 1260 1620 nm
Receiver Sensitivity PSEN -14.4 dBm 3
Overload PAVE +0.5 dBm
Receiver Reflectance Rrx -12 dB
LOS Assert Pa -30 dBm
LOS De-assert Pd -17 dBm
LOS Hysteresis Pd-Pa 0.5 4 dB
Notes:
5. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 5 -
1. The wavelength λ =1270nm~1610nm, Total 18 wavelengths, 20nm spacing
2. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
3. Under the ER worst =5, measured at 10.3125 Gb/s with PRBS 231 - 1
NRZ test pattern for BER < 1x10-12
Pin Definition And Functions
Pin Symbol Name/Description
1 VEET [1] Transmitter Ground
2 Tx_FAULT [2] Transmitter Fault
3 Tx_DIS [3] Transmitter Disable. Laser output disabled on high or open
4 SDA [2] 2-wire Serial Interface Data Line
5 SCL [2] 2-wire Serial Interface Clock Line
6 MOD_ABS [4] Module Absent. Grounded within the module
7 RS0 Rate Select 0
8 RX_LOS [2] Loss of Signal indication. Logic 0 indicates normal operation
9 RS1 [5] Rate Select 1
10 VEER [1] Receiver Ground
11 VEER [1] Receiver Ground
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver DATA out. AC Coupled
14 VEER [1] Receiver Ground
15 VCCR Receiver Power Supply
6. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 6 -
16 VCCT Transmitter Power Supply
17 VEET [1] Transmitter Ground
18 TD+ Transmitter DATA in. AC Coupled
19 TD- Transmitter Inverted DATA in. AC Coupled
20 VEET [1] Transmitter Ground
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4. Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to
Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ. Mod_ABS is asserted 'High' when the SFP+
module is physically absent from a host slot.
Serial Interface for ID and Digital Diagnostic Monitor
The SFP-10G-CWDM-1290-10-T02 transceiver support the 2-wire serial communication protocol as
defined in the SFP+ MSA. The standard SFP+ serial ID provides access to identification information that
describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, This SFP+ transceivers provide an enhanced digital diagnostic monitoring interface, which
allows real-time access to device operating parameters such as transceiver temperature, laser bias
current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a
sophisticated system of alarm and warning flags, which alerts end-users when particular operating
parameters are outside of a factory set normal range.
The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial
interface at the 8 bit address 1010000X(A0h), so the originally monitoring interface makes use of the 8 bit
address(A2h), so the originally defined serial ID memory map remains unchanged. The structure of the
memory map is shown in Table1.
Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)
7. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 7 -
Digital Diagnostic Specifications
The SFP-10G-CWDM-1290-10-T02 transceivers can be used in host systems that require
either internally or externally calibrated digital diagnostics.
Parameter Symbol Units Min. Max. Accuracy Note
Transceiver temperature DTemp-E ºC -45 +90 ±5ºC 1,2
Transceiver supply
voltage
DVoltage V 2.8 4.0 ±3%
Transmitter bias current DBias mA 0 127 ±10% 3
Transmitter output power DTx-Power dBm -8 +2 ±2dB
Receiver average input
power
DRx-Power dBm -16 0 ±2dB
Notes:
1. When Operating temp.=0~70 ºC, the range will be min=-5, Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Typical Interface Circuit
Recommended Power Supply Filter
8. SFP-10G-CWDM-1290-10-T02#141030
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 8 -
Note:
Inductors with DC resistance of less than 1Ω should be used in order to maintain the required voltage at
the SFP input pin with 3.3V supply voltage. When the recommended supply filtering network is used, hot
plugging of the SFP transceiver module will result in an inrush current of no more than 30 mA greater
than the steady state value
Package Dimensions
Ordering Information
Part Number Description
SFP-10G-CWDM-1290-10-T02
SFP+, 9.95 to 11.3Gb/s, CWDM, 10km, 0~70℃, with
Digital Diagnostic Monitor