Session of itee exam
•Download as PPTX, PDF•
0 likes•59 views
This document provides information about academic sessions at ITEE, including that sessions occur in the spring (March/April) and fall (October), with one session beginning immediately after the previous exam and registration opening one month prior, and each session ending on the exam day. It also introduces the speaker, Md. Abdullah Al Rumy, and provides his social media contact.
Report
Share
Report
Share
Recommended
Reported speech
1. Reported speech is used to report the actual words someone said indirectly rather than directly quoting them. It involves changing pronouns, verbs, and references to time and place.
2. When using reported speech, pronouns, verbs, and references to time and place need to be changed depending on whether the original speech was in the past or future tense.
3. There are specific rules for changing verbs, pronouns, questions, commands, and suggestions when using reported speech.
005 self study-guide-for-twelveth-grade-unit-1 2v
Guía de trabajo autonomo para duodécimo año.
Referencia
Ministerio de Educación Pública de Costa Rica. (2020) Guía de trabajo autonómo para duodécimo año. San José, Costa Rica.
García, M. (2020) Science and Technology. San Carlos, Costa Rica.
Usability testing
This presentation discusses usability testing, which tests the front-end user experience rather than functionality. Examples of usability testing include testing websites like Google.com and Symlex VPN. Usability testing scope can include a combination of components. The next topic was slated to be functional testing.
Main types of software testing
The main types of software testing are usability testing, functional testing, and non-functional testing. Usability testing ensures that software is easy to use, functional testing checks that the software performs as intended, and non-functional testing evaluates attributes like reliability, performance, and security. Other types were not discussed because they are considered variations of these three main categories.
Introduction of software testing types
This two week playlist introduces various software testing tools by first defining the scope of software testing and then exploring the general types of testing that can be used at different phases of software development. The presenter, Md. Abdullah Al Rumy, provides his contact information for any additional questions.
Goals of itee
The document discusses the goals of ITEE which are getting a job and pursuing higher education. It specifically mentions getting a job in Japan, Bangladesh, or as a fresher or with experience, with the goal of securing a job with a high salary. The document also discusses pursuing higher education for teaching or a higher level of ITEE, as well as getting government jobs in Bangladesh or Japan in the future. It closes by thanking the reader and asking if they have any queries.
Time and venue of itee exam
The document provides information about the time and venue for two exams - the FE Exam and IP Exam. The FE Exam will take place from 10am to 12:30pm in the morning session. The IP Exam will only take place from 10am to 12:30pm. Both exams will be held in the EXAM HALL of the Department of Computer Science and Engineering and Electronics and Communication Engineering at Bhaban (Level-8) of BUET. Students will have the opportunity to take two model exams in the months before the main exams.
Level of itee exam
This document outlines different levels of ITEE exams, including the IT Passport Exam (Level 1) which is suitable for IT and non-IT professionals and graduates. It also describes the Fundamental Information Technology Engineer Examination (Level 2) which is suitable for IT professionals, graduates, and 4th year computer science students. It provides advice on preparing for the exams by using books, practicing questions, and preparing for the next level FE exam.
Recommended
Reported speech
1. Reported speech is used to report the actual words someone said indirectly rather than directly quoting them. It involves changing pronouns, verbs, and references to time and place.
2. When using reported speech, pronouns, verbs, and references to time and place need to be changed depending on whether the original speech was in the past or future tense.
3. There are specific rules for changing verbs, pronouns, questions, commands, and suggestions when using reported speech.
005 self study-guide-for-twelveth-grade-unit-1 2v
Guía de trabajo autonomo para duodécimo año.
Referencia
Ministerio de Educación Pública de Costa Rica. (2020) Guía de trabajo autonómo para duodécimo año. San José, Costa Rica.
García, M. (2020) Science and Technology. San Carlos, Costa Rica.
Usability testing
This presentation discusses usability testing, which tests the front-end user experience rather than functionality. Examples of usability testing include testing websites like Google.com and Symlex VPN. Usability testing scope can include a combination of components. The next topic was slated to be functional testing.
Main types of software testing
The main types of software testing are usability testing, functional testing, and non-functional testing. Usability testing ensures that software is easy to use, functional testing checks that the software performs as intended, and non-functional testing evaluates attributes like reliability, performance, and security. Other types were not discussed because they are considered variations of these three main categories.
Introduction of software testing types
This two week playlist introduces various software testing tools by first defining the scope of software testing and then exploring the general types of testing that can be used at different phases of software development. The presenter, Md. Abdullah Al Rumy, provides his contact information for any additional questions.
Goals of itee
The document discusses the goals of ITEE which are getting a job and pursuing higher education. It specifically mentions getting a job in Japan, Bangladesh, or as a fresher or with experience, with the goal of securing a job with a high salary. The document also discusses pursuing higher education for teaching or a higher level of ITEE, as well as getting government jobs in Bangladesh or Japan in the future. It closes by thanking the reader and asking if they have any queries.
Time and venue of itee exam
The document provides information about the time and venue for two exams - the FE Exam and IP Exam. The FE Exam will take place from 10am to 12:30pm in the morning session. The IP Exam will only take place from 10am to 12:30pm. Both exams will be held in the EXAM HALL of the Department of Computer Science and Engineering and Electronics and Communication Engineering at Bhaban (Level-8) of BUET. Students will have the opportunity to take two model exams in the months before the main exams.
Level of itee exam
This document outlines different levels of ITEE exams, including the IT Passport Exam (Level 1) which is suitable for IT and non-IT professionals and graduates. It also describes the Fundamental Information Technology Engineer Examination (Level 2) which is suitable for IT professionals, graduates, and 4th year computer science students. It provides advice on preparing for the exams by using books, practicing questions, and preparing for the next level FE exam.
Registration itee
The document provides instructions for registering for an ITEE event. It directs the reader to visit a registration link, click the register now button, enter their Bkash transaction ID, and click send. It also notes that any confusion should be addressed by reading the interaction details and that the next topics will cover related ITEE terms.
Introduction of itee
Government of Bangladesh, in 2014, has adopted IT Engineers Examination (ITEE) as a measure to benchmark the skill and knowledge of CSE graduates and ICT professionals of Bangladesh. Currently a survey regarding popularizing and enhancing use of ITEE Certification has been undertaken by the project authority. Meanwhile, the survey has progressed and about to complete. On this occasion, Bangladesh IT Engineers Examination Center (BDITEC), Bangladesh Computer Council (BCC), in association with Japan International Cooperation Agency (JICA), and Institute of Informatics and Development (IID) a policy research institute., the company doing the survey held a workshop on ITEE and the survey held a workshop on 16th of March 2015 at BCC Bhaban, Agargaon, Dhaka
Finish Git Starter
Git is a version control system that allows tracking changes to files and coordinating work on projects. It uses Git Bash and Git commands to push code changes to a remote GitHub account for collaboration. The presenter enjoys giving presentations and their contact details are provided should anyone have any questions.
Git starter command
This document provides an introduction to Git commands for initializing and committing code to a local and remote repository. It begins with the presenter introducing themselves and sharing contact details. It then lists three essential Git commands: git init to initialize a Git repository for a project; git add -A to add all files to the local Git repository; and git commit -m "note" to commit changes to the local Git repository. The document also includes commands for adding a remote repository with git remote add and pushing the local commits to the remote repository with git push -u origin master. It closes by thanking the reader and providing additional contact information.
Git install
This document provides instructions for installing Git and creating a GitHub account in order to give presentations. It outlines downloading and installing Git from the Git website and then filling out information and creating a repository on GitHub. Contact information is provided to answer any questions.
What is git
The document introduces Git and version control systems (VCS). It discusses what VCS is, provides some examples of VCS including Bitbucket, GitHub and GitLab, and explains that Git is a service and system for version control. The document concludes by providing contact information for the presenter.
Git course intro
Git is a version control system that allows tracking changes to files. This presentation will cover what Git is, what GitHub is, how to use Git Bash and Git GUI, and common Git Bash commands. The presenter enjoys giving presentations and can be contacted on Facebook or by email for any questions.
Bjet
B-JET is a special training program run by Bangladesh and Japan to enhance job opportunities for Bangladeshis in Japan. It involves three exams: a written test involving handwritten coding, a technical viva on IT work experience and skills, and a general viva on personal details. Those who pass gain access to training in Japan that can lead to IT jobs in the country.
Spooling
This document provides contact information for Abdullah Al Rumy and introduces the topic of spooling. Spooling is defined as a process that puts data from various input/output tasks into a buffer or batch that is stored in accessible memory for input/output devices. An overview is given of spooling along with contact details to ask any questions about the presented information.
Ending testing process
This document outlines the ending process for software testing and provides definitions, participants, inputs, steps, and outputs. The process involves the testing engineer, QA manager, and end users finalizing test case execution reports, bug reports, and defect reports. Key steps are ensuring testing quality, preparing test matrices and result analysis, and creating a final test closure report. The overall goal is to close out the testing process with a defined schedule.
Ending stlc
The document provides information about an ending video presentation. It reviews definitions from a previous course on software testing lifecycle, requirements, planning, and development. It announces an upcoming course on different types of testing. It concludes by thanking viewers and providing contact information for any questions.
Deployment
This document provides an overview and agenda for ending a Software Testing Life Cycle (STLC) course. It introduces the presenter and their contact information. The review section defines key parts of the STLC process. The upcoming course section indicates the next topics will cover different types of testing. It concludes by thanking the viewers and providing contact details for any questions.
Test environment
This presentation defines a test environment, outlines who is involved including system engineers, testers and QA managers, and describes the process of selecting hardware and software, installing it, and producing the test environment and data. The presenter, Md.Abdullah Al Rumy, provides contact information for any questions.
V model
The document introduces the V-Model, a software development lifecycle model. It defines the V-Model, outlines its main steps of unit testing, integration testing, system testing and acceptance testing. The document also notes that the V-Model testing is simple but can sometimes cause difficulties. It suggests the V-Model is suited for small projects.
Test development
This document provides an overview of the software testing process, including definitions, roles, steps, and outputs. It defines writing test cases as the key part of testing and notes that the QA lead and testers are involved in testing. The process includes creating and verifying test cases, and generating test data according to the test cases. The main outputs are the test cases themselves and the accompanying test data.
Test planning
The document discusses test planning and provides an overview of the process. It defines test planning as the phase where testing strategies are initialized based on the results from requirements. Key people involved in test planning include the QA manager and lead. The main inputs are the latest release of test requirements. The process includes selecting jobs for all, gathering testing documents, and processing requirements. The main output is a test plan.
What is stlc
STLC refers to the Software Testing Life Cycle, which divides the software testing process into stages to properly test a project. It is important to learn STLC to finish testing properly and break the project into important points. While STLC corresponds to stages in the Software Development Life Cycle (SDLC), they have different meanings and roles, as depicted in the V Model where each SDLC stage has a matching STLC stage.
Requirements
This document discusses requirements analysis, which is the first phase of the software testing life cycle where stakeholders meet to define requirements and remove defects. The key steps are analyzing documents, validating requirements, and selecting the testing scope. The output is a review of defect reports and the testing requirements.
Phase of stlc
This document discusses the main phases of the software testing life cycle (STLC) including requirements, planning, analysis, design, implementation, execution, and ending. It also covers areas where bugs may arise and testing is needed. The document is presented by Md.Abdullah Al Rumy and provides his contact information for any questions.
About stlc course
This document provides information about an introductory course on software testing life cycle (STLC) that contains less than 10 videos. The course aims to teach basic knowledge of STLC and is presented by Md.Abdullah Al Rumy, who can be contacted through his Facebook page or by phone and email for any questions.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
More Related Content
More from Abdullah Al Rumy
Registration itee
The document provides instructions for registering for an ITEE event. It directs the reader to visit a registration link, click the register now button, enter their Bkash transaction ID, and click send. It also notes that any confusion should be addressed by reading the interaction details and that the next topics will cover related ITEE terms.
Introduction of itee
Government of Bangladesh, in 2014, has adopted IT Engineers Examination (ITEE) as a measure to benchmark the skill and knowledge of CSE graduates and ICT professionals of Bangladesh. Currently a survey regarding popularizing and enhancing use of ITEE Certification has been undertaken by the project authority. Meanwhile, the survey has progressed and about to complete. On this occasion, Bangladesh IT Engineers Examination Center (BDITEC), Bangladesh Computer Council (BCC), in association with Japan International Cooperation Agency (JICA), and Institute of Informatics and Development (IID) a policy research institute., the company doing the survey held a workshop on ITEE and the survey held a workshop on 16th of March 2015 at BCC Bhaban, Agargaon, Dhaka
Finish Git Starter
Git is a version control system that allows tracking changes to files and coordinating work on projects. It uses Git Bash and Git commands to push code changes to a remote GitHub account for collaboration. The presenter enjoys giving presentations and their contact details are provided should anyone have any questions.
Git starter command
This document provides an introduction to Git commands for initializing and committing code to a local and remote repository. It begins with the presenter introducing themselves and sharing contact details. It then lists three essential Git commands: git init to initialize a Git repository for a project; git add -A to add all files to the local Git repository; and git commit -m "note" to commit changes to the local Git repository. The document also includes commands for adding a remote repository with git remote add and pushing the local commits to the remote repository with git push -u origin master. It closes by thanking the reader and providing additional contact information.
Git install
This document provides instructions for installing Git and creating a GitHub account in order to give presentations. It outlines downloading and installing Git from the Git website and then filling out information and creating a repository on GitHub. Contact information is provided to answer any questions.
What is git
The document introduces Git and version control systems (VCS). It discusses what VCS is, provides some examples of VCS including Bitbucket, GitHub and GitLab, and explains that Git is a service and system for version control. The document concludes by providing contact information for the presenter.
Git course intro
Git is a version control system that allows tracking changes to files. This presentation will cover what Git is, what GitHub is, how to use Git Bash and Git GUI, and common Git Bash commands. The presenter enjoys giving presentations and can be contacted on Facebook or by email for any questions.
Bjet
B-JET is a special training program run by Bangladesh and Japan to enhance job opportunities for Bangladeshis in Japan. It involves three exams: a written test involving handwritten coding, a technical viva on IT work experience and skills, and a general viva on personal details. Those who pass gain access to training in Japan that can lead to IT jobs in the country.
Spooling
This document provides contact information for Abdullah Al Rumy and introduces the topic of spooling. Spooling is defined as a process that puts data from various input/output tasks into a buffer or batch that is stored in accessible memory for input/output devices. An overview is given of spooling along with contact details to ask any questions about the presented information.
Ending testing process
This document outlines the ending process for software testing and provides definitions, participants, inputs, steps, and outputs. The process involves the testing engineer, QA manager, and end users finalizing test case execution reports, bug reports, and defect reports. Key steps are ensuring testing quality, preparing test matrices and result analysis, and creating a final test closure report. The overall goal is to close out the testing process with a defined schedule.
Ending stlc
The document provides information about an ending video presentation. It reviews definitions from a previous course on software testing lifecycle, requirements, planning, and development. It announces an upcoming course on different types of testing. It concludes by thanking viewers and providing contact information for any questions.
Deployment
This document provides an overview and agenda for ending a Software Testing Life Cycle (STLC) course. It introduces the presenter and their contact information. The review section defines key parts of the STLC process. The upcoming course section indicates the next topics will cover different types of testing. It concludes by thanking the viewers and providing contact details for any questions.
Test environment
This presentation defines a test environment, outlines who is involved including system engineers, testers and QA managers, and describes the process of selecting hardware and software, installing it, and producing the test environment and data. The presenter, Md.Abdullah Al Rumy, provides contact information for any questions.
V model
The document introduces the V-Model, a software development lifecycle model. It defines the V-Model, outlines its main steps of unit testing, integration testing, system testing and acceptance testing. The document also notes that the V-Model testing is simple but can sometimes cause difficulties. It suggests the V-Model is suited for small projects.
Test development
This document provides an overview of the software testing process, including definitions, roles, steps, and outputs. It defines writing test cases as the key part of testing and notes that the QA lead and testers are involved in testing. The process includes creating and verifying test cases, and generating test data according to the test cases. The main outputs are the test cases themselves and the accompanying test data.
Test planning
The document discusses test planning and provides an overview of the process. It defines test planning as the phase where testing strategies are initialized based on the results from requirements. Key people involved in test planning include the QA manager and lead. The main inputs are the latest release of test requirements. The process includes selecting jobs for all, gathering testing documents, and processing requirements. The main output is a test plan.
What is stlc
STLC refers to the Software Testing Life Cycle, which divides the software testing process into stages to properly test a project. It is important to learn STLC to finish testing properly and break the project into important points. While STLC corresponds to stages in the Software Development Life Cycle (SDLC), they have different meanings and roles, as depicted in the V Model where each SDLC stage has a matching STLC stage.
Requirements
This document discusses requirements analysis, which is the first phase of the software testing life cycle where stakeholders meet to define requirements and remove defects. The key steps are analyzing documents, validating requirements, and selecting the testing scope. The output is a review of defect reports and the testing requirements.
Phase of stlc
This document discusses the main phases of the software testing life cycle (STLC) including requirements, planning, analysis, design, implementation, execution, and ending. It also covers areas where bugs may arise and testing is needed. The document is presented by Md.Abdullah Al Rumy and provides his contact information for any questions.
About stlc course
This document provides information about an introductory course on software testing life cycle (STLC) that contains less than 10 videos. The course aims to teach basic knowledge of STLC and is presented by Md.Abdullah Al Rumy, who can be contacted through his Facebook page or by phone and email for any questions.
More from Abdullah Al Rumy (20)
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Recently uploaded (20)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Session of itee exam
- 2. Hello! Md. Abdullah Al Rumy I am here because I love to give presentations. You can find me at -> @fb/abdllahalrumy
- 4. TWO Session Spring - First Half of the year. Fall - Second Half of the year.
- 5. Spring Generally in the march or april is the right time.
- 6. Fall October is the right time for fall
- 7. Session start One session begin after prev exam immediately. But registration link open after one month.
- 8. Session end One session end at exam day.