The Secced DV6 Kit is a professional video tripod system recommended for camcorders up to 6.6 kg. The key components are a fluid head tripod with a 75 mm bowl diameter, video tripod legs, and a floor spreader. The fluid head has a payload capacity ranging from 1 to 6.6 kg across its tilt range of -75 to +90 degrees. The tripod uses a quick release plate and balance platform system to easily and precisely balance camera loads on the fluid head.

1. DV6/75A
Secced DV6 Kit is a professional video tripod system, that is recommended for
all handheld-type camcorders, up to a load of 6.6 kgs (14.5 lbs). The most important
components are the fluid head, video tripod leg with floor-spreader and the padded
bag. Typical payload capacity of the SC-DV6/75AH fluid head ranges from 1 to 6.6
kgs (2.2 to 14.5 lbs). Maximum payload capacity refers to the whole tilt range, from
-75° to +90°. The camera attachment to the head is a 'quick release plate + balance
platform' type sideload system, that ensures easier and more precise camera
balance-point Balance point is the vertical projection of CoG of the horizontally
levelled camera mounted on the tripod head. When the sliding plate is adjusted
correctly, the balance point of the fully loaded camera is positioned exactly vertically
above the head's tilt axis, so the camera is in balance, it does not tilt forwards or
backwards. adjustment than the 'sliding camera plate' at the eariler, smaller Ares
heads.
Description Configuration
Weight: 6.2kg Head: SC-DV6/75AH
Payload: 0.6-6.6kg Tripod: SC-DV/AL75D
Height Range: 55-162mm Pan Bar: SC-PB10
Bowl Diameter: 75 mm Ground Spreader: SC-FS100
Transport Length: 86cm
Secced DV6/75A
€ 799,- Excl. BTW